summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-27net: hinic: Fix cleanup in create_rxqs/txqs()Dan Carpenter
[ Upstream commit 7203d10e93b6e6e1d19481ef7907de6a9133a467 ] There is a check for NULL at the start of create_txqs() and create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The intention is that if the device is already open and the queues are already created then we don't create them a second time. However, the bug is that if we have an error in the create_txqs() then the pointer doesn't get set back to NULL. The NULL check at the start of the function will say that it's already open when it's not and the device can't be used. Set ->txqs back to NULL on cleanup on error. Fixes: c3e79baf1b03 ("net-next/hinic: Add logical Txq and Rxq") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27team: Fix feature exposure when no ports are presentDaniel Borkmann
[ Upstream commit e78c20f327bd94dabac68b98218dff069a8780f0 ] Small follow-up to align this to an equivalent behavior as the bond driver. The change in 3625920b62c3 ("teaming: fix vlan_features computing") removed the netdevice vlan_features when there is no team port attached, yet it leaves the full set of enc_features intact. Instead, leave the default features as pre 3625920b62c3, and recompute once we do have ports attached. Also, similarly as in bonding case, call the netdev_base_features() helper on the enc_features. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27net: renesas: rswitch: rework ts tags managementNikita Yushchenko
[ Upstream commit 922b4b955a03d19fea98938f33ef0e62d01f5159 ] The existing linked list based implementation of how ts tags are assigned and managed is unsafe against concurrency and corner cases: - element addition in tx processing can race against element removal in ts queue completion, - element removal in ts queue completion can race against element removal in device close, - if a large number of frames gets added to tx queue without ts queue completions in between, elements with duplicate tag values can get added. Use a different implementation, based on per-port used tags bitmaps and saved skb arrays. Safety for addition in tx processing vs removal in ts completion is provided by: tag = find_first_zero_bit(...); smp_mb(); <write rdev->ts_skb[tag]> set_bit(...); vs <read rdev->ts_skb[tag]> smp_mb(); clear_bit(...); Safety for removal in ts completion vs removal in device close is provided by using atomic read-and-clear for rdev->ts_skb[tag]: ts_skb = xchg(&rdev->ts_skb[tag], NULL); if (ts_skb) <handle it> Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27ionic: use ee->offset when returning sprom dataShannon Nelson
[ Upstream commit b096d62ba1323391b2db98b7704e2468cf3b1588 ] Some calls into ionic_get_module_eeprom() don't use a single full buffer size, but instead multiple calls with an offset. Teach our driver to use the offset correctly so we can respond appropriately to the caller. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27ionic: no double destroy workqueueShannon Nelson
[ Upstream commit 746e6ae2e202b062b9deee7bd86d94937997ecd7 ] There are some FW error handling paths that can cause us to try to destroy the workqueue more than once, so let's be sure we're checking for that. The case where this popped up was in an AER event where the handlers got called in such a way that ionic_reset_prepare() and thus ionic_dev_teardown() got called twice in a row. The second time through the workqueue was already destroyed, and destroy_workqueue() choked on the bad wq pointer. We didn't hit this in AER handler testing before because at that time we weren't using a private workqueue. Later we replaced the use of the system workqueue with our own private workqueue but hadn't rerun the AER handler testing since then. Fixes: 9e25450da700 ("ionic: add private workqueue per-device") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27ionic: Fix netdev notifier unregister on failureBrett Creeley
[ Upstream commit 9590d32e090ea2751e131ae5273859ca22f5ac14 ] If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27netdevsim: prevent bad user input in nsim_dev_health_break_write()Eric Dumazet
[ Upstream commit ee76746387f6233bdfa93d7406990f923641568f ] If either a zero count or a large one is provided, kernel can crash. Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic()Vladimir Oltean
[ Upstream commit 2d5df3a680ffdaf606baa10636bdb1daf757832e ] Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27cxl/region: Fix region creation for greater than x2 switchesHuaisheng Ye
[ Upstream commit 76467a94810c2aa4dd3096903291ac6df30c399e ] The cxl_port_setup_targets() algorithm fails to identify valid target list ordering in the presence of 4-way and above switches resulting in 'cxl create-region' failures of the form: $ cxl create-region -d decoder0.0 -g 1024 -s 2G -t ram -w 8 -m mem4 mem1 mem6 mem3 mem2 mem5 mem7 mem0 cxl region: create_region: region0: failed to set target7 to mem0 cxl region: cmd_create_region: created 0 regions [kernel debug message] check_last_peer:1213: cxl region0: pci0000:0c:port1: cannot host mem6:decoder7.0 at 2 bus_remove_device:574: bus: 'cxl': remove device region0 QEMU can create this failing topology: ACPI0017:00 [root0] | HB_0 [port1] / \ RP_0 RP_1 | | USP [port2] USP [port3] / / \ \ / / \ \ DSP DSP DSP DSP DSP DSP DSP DSP | | | | | | | | mem4 mem6 mem2 mem7 mem1 mem3 mem5 mem0 Pos: 0 2 4 6 1 3 5 7 HB: Host Bridge RP: Root Port USP: Upstream Port DSP: Downstream Port ...with the following command steps: $ qemu-system-x86_64 -machine q35,cxl=on,accel=tcg \ -smp cpus=8 \ -m 8G \ -hda /home/work/vm-images/centos-stream8-02.qcow2 \ -object memory-backend-ram,size=4G,id=m0 \ -object memory-backend-ram,size=4G,id=m1 \ -object memory-backend-ram,size=2G,id=cxl-mem0 \ -object memory-backend-ram,size=2G,id=cxl-mem1 \ -object memory-backend-ram,size=2G,id=cxl-mem2 \ -object memory-backend-ram,size=2G,id=cxl-mem3 \ -object memory-backend-ram,size=2G,id=cxl-mem4 \ -object memory-backend-ram,size=2G,id=cxl-mem5 \ -object memory-backend-ram,size=2G,id=cxl-mem6 \ -object memory-backend-ram,size=2G,id=cxl-mem7 \ -numa node,memdev=m0,cpus=0-3,nodeid=0 \ -numa node,memdev=m1,cpus=4-7,nodeid=1 \ -netdev user,id=net0,hostfwd=tcp::2222-:22 \ -device virtio-net-pci,netdev=net0 \ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \ -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \ -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \ -device cxl-upstream,bus=root_port0,id=us0 \ -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \ -device cxl-type3,bus=swport0,volatile-memdev=cxl-mem0,id=cxl-vmem0 \ -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \ -device cxl-type3,bus=swport1,volatile-memdev=cxl-mem1,id=cxl-vmem1 \ -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \ -device cxl-type3,bus=swport2,volatile-memdev=cxl-mem2,id=cxl-vmem2 \ -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \ -device cxl-type3,bus=swport3,volatile-memdev=cxl-mem3,id=cxl-vmem3 \ -device cxl-upstream,bus=root_port1,id=us1 \ -device cxl-downstream,port=4,bus=us1,id=swport4,chassis=0,slot=8 \ -device cxl-type3,bus=swport4,volatile-memdev=cxl-mem4,id=cxl-vmem4 \ -device cxl-downstream,port=5,bus=us1,id=swport5,chassis=0,slot=9 \ -device cxl-type3,bus=swport5,volatile-memdev=cxl-mem5,id=cxl-vmem5 \ -device cxl-downstream,port=6,bus=us1,id=swport6,chassis=0,slot=10 \ -device cxl-type3,bus=swport6,volatile-memdev=cxl-mem6,id=cxl-vmem6 \ -device cxl-downstream,port=7,bus=us1,id=swport7,chassis=0,slot=11 \ -device cxl-type3,bus=swport7,volatile-memdev=cxl-mem7,id=cxl-vmem7 \ -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=32G & In Guest OS: $ cxl create-region -d decoder0.0 -g 1024 -s 2G -t ram -w 8 -m mem4 mem1 mem6 mem3 mem2 mem5 mem7 mem0 Fix the method to calculate @distance by iterativeley multiplying the number of targets per switch port. This also follows the algorithm recommended here [1]. Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Link: http://lore.kernel.org/6538824b52349_7258329466@dwillia2-xfh.jf.intel.com.notmuch [1] Signed-off-by: Huaisheng Ye <huaisheng.ye@intel.com> Tested-by: Li Zhijian <lizhijian@fujitsu.com> [djbw: add a comment explaining 'distance'] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/173378716722.1270362.9546805175813426729.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27cxl/pci: Fix potential bogus return value upon successful probingDavidlohr Bueso
[ Upstream commit da4d8c83358163df9a4addaeba0ef8bcb03b22e8 ] If cxl_pci_ras_unmask() returns non-zero, cxl_pci_probe() will end up returning that value, instead of zero. Fixes: 248529edc86f ("cxl: add RAS status unmasking for CXL") Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/20241115170032.108445-1-dave@stgolabs.net Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27i2c: pnx: Fix timeout in wait functionsVladimir Riabchun
[ Upstream commit 7363f2d4c18557c99c536b70489187bb4e05c412 ] Since commit f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr") jiffies are stored in i2c_pnx_algo_data.timeout, but wait_timeout and wait_reset are still using it as milliseconds. Convert jiffies back to milliseconds to wait for the expected amount of time. Fixes: f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27p2sb: Do not scan and remove the P2SB device when it is unhiddenShin'ichiro Kawasaki
[ Upstream commit 360c400d0f568636c1b98d1d5f9f49aa3d420c70 ] When drivers access P2SB device resources, it calls p2sb_bar(). Before the commit 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"), p2sb_bar() obtained the resources and then called pci_stop_and_remove_bus_device() for clean up. Then the P2SB device disappeared. The commit 5913320eb0b3 introduced the P2SB device resource cache feature in the boot process. During the resource cache, pci_stop_and_remove_bus_device() is called for the P2SB device, then the P2SB device disappears regardless of whether p2sb_bar() is called or not. Such P2SB device disappearance caused a confusion [1]. To avoid the confusion, avoid the pci_stop_and_remove_bus_device() call when the BIOS does not hide the P2SB device. For that purpose, cache the P2SB device resources only if the BIOS hides the P2SB device. Call p2sb_scan_and_cache() only if p2sb_hidden_by_bios is true. This allows removing two branches from p2sb_scan_and_cache(). When p2sb_bar() is called, get the resources from the cache if the P2SB device is hidden. Otherwise, read the resources from the unhidden P2SB device. Reported-by: Daniel Walker (danielwa) <danielwa@cisco.com> Closes: https://lore.kernel.org/lkml/ZzTI+biIUTvFT6NC@goliath/ [1] Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-5-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()Shin'ichiro Kawasaki
[ Upstream commit 0286070c74ee48391fc07f7f617460479472d221 ] To prepare for the following fix, move the code to hide and unhide the P2SB device from p2sb_cache_resources() to p2sb_scan_and_cache(). Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-4-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27p2sb: Introduce the global flag p2sb_hidden_by_biosShin'ichiro Kawasaki
[ Upstream commit ae3e6ebc5ab046d434c05c58a3e3f7e94441fec2 ] To prepare for the following fix, introduce the global flag p2sb_hidden_by_bios. Check if the BIOS hides the P2SB device and store the result in the flag. This allows to refer to the check result across functions. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-3-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27p2sb: Factor out p2sb_read_from_cache()Shin'ichiro Kawasaki
[ Upstream commit 9244524d60ddea55f4df54c51200e8fef2032447 ] To prepare for the following fix, factor out the code to read the P2SB resource from the cache to the new function p2sb_read_from_cache(). Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241128002836.373745-2-shinichiro.kawasaki@wdc.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Stable-dep-of: 360c400d0f56 ("p2sb: Do not scan and remove the P2SB device when it is unhidden") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27firmware: arm_ffa: Fix the race around setting ffa_dev->propertiesLevi Yun
[ Upstream commit 6fe437cfe2cdc797b03f63b338a13fac96ed6a08 ] Currently, ffa_dev->properties is set after the ffa_device_register() call return in ffa_setup_partitions(). This could potentially result in a race where the partition's properties is accessed while probing struct ffa_device before it is set. Update the ffa_device_register() to receive ffa_partition_info so all the data from the partition information received from the firmware can be updated into the struct ffa_device before the calling device_register() in ffa_device_register(). Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Levi Yun <yeoreum.yun@arm.com> Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27firmware: arm_scmi: Fix i.MX build dependencyArnd Bergmann
[ Upstream commit 514b2262ade48a0503ac6aa03c3bfb8c5be69b21 ] The newly added SCMI vendor driver references functions in the protocol driver but needs a Kconfig dependency to ensure it can link, essentially the Kconfig dependency needs to be reversed to match the link time dependency: | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write': | fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set' | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read': | fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get' This however only works after changing the dependency in the SND_SOC_FSL_MQS driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a driver it depends on. This is generally a bad idea, so the best solution is to change that into a dependency. To allow the ASoC driver to keep building with the SCMI support, this needs to be an optional dependency that enforces the link-time dependency if IMX_SCMI_MISC_DRV is a loadable module but not depend on it if that is disabled. Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Message-Id: <20241115230555.2435004-1-arnd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27net: stmmac: fix TSO DMA API usage causing oopsRussell King (Oracle)
[ Upstream commit 4c49f38e20a57f8abaebdf95b369295b153d1f8e ] Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ Reported-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19xen/netfront: fix crash when removing deviceJuergen Gross
commit f9244fb55f37356f75c739c57323d9422d7aa0f8 upstream. When removing a netfront device directly after a suspend/resume cycle it might happen that the queues have not been setup again, causing a crash during the attempt to stop the queues another time. Fix that by checking the queues are existing before trying to stop them. This is XSA-465 / CVE-2024-53240. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: d50b7914fae0 ("xen-netfront: Fix NULL sring after live migration") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19drm/xe/reg_sr: Remove register poolLucas De Marchi
[ Upstream commit d7b028656c29b22fcde1c6ee1df5b28fbba987b5 ] That pool implementation doesn't really work: if the krealloc happens to move the memory and return another address, the entries in the xarray become invalid, leading to use-after-free later: BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe] Read of size 4 at addr ffff8881244b2590 by task modprobe/2753 Allocated by task 2753: kasan_save_stack+0x39/0x70 kasan_save_track+0x14/0x40 kasan_save_alloc_info+0x37/0x60 __kasan_kmalloc+0xc3/0xd0 __kmalloc_node_track_caller_noprof+0x200/0x6d0 krealloc_noprof+0x229/0x380 Simplify the code to fix the bug. A better pooling strategy may be added back later if needed. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241209232739.147417-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19drm/xe: fix the ERR_PTR() returned on failure to allocate tiny ptMirsad Todorovac
[ Upstream commit ed69b28b3a5e39871ba5599992f80562d6ee59db ] Running coccinelle spatch gave the following warning: ./drivers/gpu/drm/xe/tests/xe_migrate.c:226:5-11: inconsistent IS_ERR and PTR_ERR on line 228. The code reports PTR_ERR(pt) when IS_ERR(tiny) is checked: → 211 pt = xe_bo_create_pin_map(xe, tile, m->q->vm, XE_PAGE_SIZE, 212 ttm_bo_type_kernel, 213 XE_BO_FLAG_VRAM_IF_DGFX(tile) | 214 XE_BO_FLAG_PINNED); 215 if (IS_ERR(pt)) { 216 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n", 217 PTR_ERR(pt)); 218 goto free_big; 219 } 220 221 tiny = xe_bo_create_pin_map(xe, tile, m->q->vm, → 222 2 * SZ_4K, 223 ttm_bo_type_kernel, 224 XE_BO_FLAG_VRAM_IF_DGFX(tile) | 225 XE_BO_FLAG_PINNED); → 226 if (IS_ERR(tiny)) { → 227 KUNIT_FAIL(test, "Failed to allocate fake pt: %li\n", → 228 PTR_ERR(pt)); 229 goto free_pt; 230 } Now, the IS_ERR(tiny) and the corresponding PTR_ERR(pt) do not match. Returning PTR_ERR(tiny), as the last failed function call, seems logical. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241121212057.1526634-2-mtodorovac69@gmail.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit cb57c75098c1c449a007ba301f9073f96febaaa9) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundariesJesse Van Gavere
[ Upstream commit 5af53577c64fa84da032d490b701127fe8d1a6aa ] Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix for KSZ9896 is adapted from there as the same errata is present in KSZ9896C as "Module 5: Certain PHY registers must be written as pairs instead of singly" the explanation below is likewise taken from this commit. The commit provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9896 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10") Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com> Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: fix initial MPIC register settingNikita Yushchenko
[ Upstream commit fb9e6039c325cc205a368046dc03c56c87df2310 ] MPIC.PIS must be set per phy interface type. MPIC.LSC must be set per speed. Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19Bluetooth: btmtk: avoid UAF in btmtk_process_coredumpThadeu Lima de Souza Cascardo
[ Upstream commit b548f5e9456c568155499d9ebac675c0d7a296e8 ] hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called. ================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82 CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace: <TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 82: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 __kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 Freed by task 1733: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0 ____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28) The buggy address belongs to the physical page: page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds. Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19ACPICA: events/evxfregn: don't release the ContextMutex that was never acquiredDaniil Tatianin
[ Upstream commit c53d96a4481f42a1635b96d2c1acbb0a126bfd54 ] This bug was first introduced in c27f3d011b08, where the author of the patch probably meant to do DeleteMutex instead of ReleaseMutex. The mutex leak was noticed later on and fixed in e4dfe108371, but the bogus MutexRelease line was never removed, so do it now. Link: https://github.com/acpica/acpica/pull/982 Fixes: c27f3d011b08 ("ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter handling") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Link: https://patch.msgid.link/20241122082954.658356-1-d-tatianin@yandex-team.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
[ Upstream commit 98712844589e06d9aa305b5077169942139fd75c ] Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19team: Fix initial vlan_feature set in __team_compute_featuresDaniel Borkmann
[ Upstream commit 396699ac2cb1bc4e3485abb48a1e3e41956de0cd ] Similarly as with bonding, fix the calculation of vlan_features to reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
[ Upstream commit 77b11c8bf3a228d1c63464534c2dcc8d9c8bf7ff ] Drivers like mlx5 expose NIC's vlan_features such as NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are later not propagated when the underlying devices are bonded and a vlan device created on top of the bond. Right now, the more cumbersome workaround for this is to create the vlan on top of the mlx5 and then enslave the vlan devices to a bond. To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES such that bond_compute_features() can probe and propagate the vlan_features from the slave devices up to the vlan device. Given the following bond: # ethtool -i enp2s0f{0,1}np{0,1} driver: mlx5_core [...] # ethtool -k enp2s0f0np0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k enp2s0f1np1 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k bond0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Before: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: off [requested on] tx-udp_tnl-csum-segmentation: off [requested on] tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off After: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Various users have run into this reporting performance issues when configuring Cilium in vxlan tunneling mode and having the combination of bond & vlan for the core devices connecting the Kubernetes cluster to the outside world. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19bonding: Fix initial {vlan,mpls}_feature set in bond_compute_featuresDaniel Borkmann
[ Upstream commit d064ea7fe2a24938997b5e88e6b61cbb0a4bb906 ] If a bonding device has slave devices, then the current logic to derive the feature set for the master bond device is limited in that flags which are fully supported by the underlying slave devices cannot be propagated up to vlan devices which sit on top of bond devices. Instead, these get blindly masked out via current NETIF_F_ALL_FOR_ALL logic. vlan_features and mpls_features should reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Fixes: 2e770b507ccd ("net: bonding: Inherit MPLS features from slave devices") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net, team, bonding: Add netdev_base_features helperDaniel Borkmann
[ Upstream commit d2516c3a53705f783bb6868df0f4a2b977898a71 ] Both bonding and team driver have logic to derive the base feature flags before iterating over their slave devices to refine the set via netdev_increment_features(). Add a small helper netdev_base_features() so this can be reused instead of having it open-coded multiple times. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: d064ea7fe2a2 ("bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: dsa: felix: fix stuck CPU-injected packets with short taprio windowsVladimir Oltean
[ Upstream commit acfcdb78d5d4cdb78e975210c8825b9a112463f6 ] With this port schedule: tc qdisc replace dev $send_if parent root handle 100 taprio \ num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ map 0 1 2 3 4 5 6 7 \ base-time 0 cycle-time 10000 \ sched-entry S 01 1250 \ sched-entry S 02 1250 \ sched-entry S 04 1250 \ sched-entry S 08 1250 \ sched-entry S 10 1250 \ sched-entry S 20 1250 \ sched-entry S 40 1250 \ sched-entry S 80 1250 \ flags 2 ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4134.168]: port 2: send peer delay response failed It turns out that the driver can't take their TX timestamps because it can't transmit them in the first place. And there's nothing special about the Pdelay_Resp packets - they're just regular 68 byte packets. But with this taprio configuration, the switch would refuse to send even the ETH_ZLEN minimum packet size. This should have definitely not been the case. When applying the taprio config, the driver prints: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent without problems. Yet it's not. For the forwarding path, the configuration is fine, yet packets injected from Linux get stuck with this schedule no matter what. The first hint that the static guard bands are the cause of the problem is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") made things work. It must be that the guard bands are calculated incorrectly. I remembered that there is a magic constant in the driver, set to 33 ns for no logical reason other than experimentation, which says "never let the static guard bands get so large as to leave less than this amount of remaining space in the time slot, because the queue system will refuse to schedule packets otherwise, and they will get stuck". I had a hunch that my previous experimentally-determined value was only good for packets coming from the forwarding path, and that the CPU injection path needed more. I came to the new value of 35 ns through binary search, after seeing that with 544 ns (the bit time required to send the Pdelay_Resp packet at gigabit) it works. Again, this is purely experimental, there's no logic and the manual doesn't say anything. The new driver prints for this schedule look like this: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS So yes, the maximum MTU is now even smaller by 1 byte than before. This is maybe counter-intuitive, but makes more sense with a diagram of one time slot. Before: Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <----><----------------------------------------------> 33 ns 1217 ns static guard band useful Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <-----><---------------------------------------------> 35 ns 1215 ns static guard band useful The static guard band implemented by this switch hardware directly determines the maximum allowable MTU for that traffic class. The larger it is, the earlier the switch will stop scheduling frames for transmission, because otherwise they might overrun the gate close time (and avoiding that is the entire purpose of Michael's patch). So, we now have guard bands smaller by 2 ns, thus, in this particular case, we lose a byte of the maximum MTU. Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: mana: Fix irq_contexts memory leak in mana_gd_setup_irqsMaxim Levitsky
[ Upstream commit 9a5beb6ca6305de5c5210efab0702ea79b62eb39 ] gc->irq_contexts is not freeded if one of the later operations fail. Suggested-by: Michael Kelley <mhklinux@outlook.com> Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: mana: Fix memory leak in mana_gd_setup_irqsMaxim Levitsky
[ Upstream commit bb1e3eb57d2cc38951f9a9f1b8c298ced175798f ] Commit 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") added memory allocation in mana_gd_setup_irqs of 'irqs' but the code doesn't free this temporary array in the success path. This was caught by kmemleak. Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: handle stop vs interrupt raceNikita Yushchenko
[ Upstream commit 3dd002f20098b9569f8fd7f8703f364571e2e975 ] Currently the stop routine of rswitch driver does not immediately prevent hardware from continuing to update descriptors and requesting interrupts. It can happen that when rswitch_stop() executes the masking of interrupts from the queues of the port being closed, napi poll for that port is already scheduled or running on a different CPU. When execution of this napi poll completes, it will unmask the interrupts. And unmasked interrupt can fire after rswitch_stop() returns from napi_disable() call. Then, the handler won't mask it, because napi_schedule_prep() will return false, and interrupt storm will happen. This can't be fixed by making rswitch_stop() call napi_disable() before masking interrupts. In this case, the interrupt storm will happen if interrupt fires between napi_disable() and masking. Fix this by checking for priv->opened_ports bit when unmasking interrupts after napi poll. For that to be consistent, move priv->opened_ports changes into spinlock-protected areas, and reorder other operations in rswitch_open() and rswitch_stop() accordingly. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: avoid use-after-put for a device tree nodeNikita Yushchenko
[ Upstream commit 66b7e9f85b8459c823b11e9af69dbf4be5eb6be8 ] The device tree node saved in the rswitch_device structure is used at several driver locations. So passing this node to of_node_put() after the first use is wrong. Move of_node_put() for this node to exit paths. Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: fix leaked pointer on error pathNikita Yushchenko
[ Upstream commit bb617328bafa1023d8e9c25a25345a564c66c14f ] If error path is taken while filling descriptor for a frame, skb pointer is left in the entry. Later, on the ring entry reuse, the same entry could be used as a part of a multi-descriptor frame, and skb for that new frame could be stored in a different entry. Then, the stale pointer will reach the completion routine, and passed to the release operation. Fix that by clearing the saved skb pointer at the error path. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: fix race window between tx start and completeNikita Yushchenko
[ Upstream commit 0c9547e6ccf40455b0574cf589be3b152a3edf5b ] If hardware is already transmitting, it can start handling the descriptor being written to immediately after it observes updated DT field, before the queue is kicked by a write to GWTRC. If the start_xmit() execution is preempted at unfortunate moment, this transmission can complete, and interrupt handled, before gq->cur gets updated. With the current implementation of completion, this will cause the last entry not completed. Fix that by changing completion loop to check DT values directly, instead of depending on gq->cur. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: renesas: rswitch: fix possible early skb releaseNikita Yushchenko
[ Upstream commit 5cb099902b6b6292b3a85ffa1bb844e0ba195945 ] When sending frame split into multiple descriptors, hardware processes descriptors one by one, including writing back DT values. The first descriptor could be already marked as completed when processing of next descriptors for the same frame is still in progress. Although only the last descriptor is configured to generate interrupt, completion of the first descriptor could be noticed by the driver when handling interrupt for the previous frame. Currently, driver stores skb in the entry that corresponds to the first descriptor. This results into skb could be unmapped and freed when hardware did not complete the send yet. This opens a window for corrupting the data being sent. Fix this by saving skb in the entry that corresponds to the last descriptor used to send the frame. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chipsMichael Chan
[ Upstream commit 24c6843b7393ebc80962b59d7ae71af91bf0dcc1 ] The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19qca_spi: Make driver probing reliableStefan Wahren
[ Upstream commit becc6399ce3b724cffe9ccb7ef0bff440bb1b62b ] The module parameter qcaspi_pluggable controls if QCA7000 signature should be checked at driver probe (current default) or not. Unfortunately this could fail in case the chip is temporary in reset, which isn't under total control by the Linux host. So disable this check per default in order to avoid unexpected probe failures. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19qca_spi: Fix clock speed for multiple QCA7000Stefan Wahren
[ Upstream commit 4dba406fac06b009873fe7a28231b9b7e4288b09 ] Storing the maximum clock speed in module parameter qcaspi_clkspeed has the unintended side effect that the first probed instance defines the value for all other instances. Fix this issue by storing it in max_speed_hz of the relevant SPI device. This fix keeps the priority of the speed parameter (module parameter, device tree property, driver default). Btw this uses the opportunity to get the rid of the unused member clkspeed. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19cxgb4: use port number to set mac addrAnumula Murali Mohan Reddy
[ Upstream commit 356983f569c1f5991661fc0050aa263792f50616 ] t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl() uses port number to get mac addr, this leads to error when an attempt to set MAC address on VF's of PF2 and PF3. This patch fixes the issue by using port number to set mac address. Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF") Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19ACPI: resource: Fix memory resource type union accessIlpo Järvinen
[ Upstream commit 7899ca9f3bd2b008e9a7c41f2a9f1986052d7e96 ] In acpi_decode_space() addr->info.mem.caching is checked on main level for any resource type but addr->info.mem is part of union and thus valid only if the resource type is memory range. Move the check inside the preceeding switch/case to only execute it when the union is of correct type. Fixes: fcb29bbcd540 ("ACPI: Add prefetch decoding to the address space parser") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20241202100614.20731-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: sparx5: fix the maximum frame length registerDaniel Machon
[ Upstream commit ddd7ba006078a2bef5971b2dc5f8383d47f96207 ] On port initialization, we configure the maximum frame length accepted by the receive module associated with the port. This value is currently written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix this. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: sparx5: fix FDMA performance issueDaniel Machon
[ Upstream commit f004f2e535e2b66ccbf5ac35f8eaadeac70ad7b7 ] The FDMA handler is responsible for scheduling a NAPI poll, which will eventually fetch RX packets from the FDMA queue. Currently, the FDMA handler is run in a threaded context. For some reason, this kills performance. Admittedly, I did not do a thorough investigation to see exactly what causes the issue, however, I noticed that in the other driver utilizing the same FDMA engine, we run the FDMA handler in hard IRQ context. Fix this performance issue, by running the FDMA handler in hard IRQ context, not deferring any work to a thread. Prior to this change, the RX UDP performance was: Interval Transfer Bitrate Jitter 0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms After this change, the rx UDP performance is: Interval Transfer Bitrate Jitter 0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()Christophe JAILLET
[ Upstream commit c84dda3751e945a67d71cbe3af4474aad24a5794 ] A aspeed_spi_start_user() is not balanced by a corresponding aspeed_spi_stop_user(). Add the missing call. Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19regulator: axp20x: AXP717: set ramp_delayPhilippe Simons
[ Upstream commit f07ae52f5cf6a5584fdf7c8c652f027d90bc8b74 ] AXP717 datasheet says that regulator ramp delay is 15.625 us/step, which is 10mV in our case. Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0 For DCDC4, steps is 100mv Add a AXP_DESC_DELAY macro and update AXP_DESC macro to expand to AXP_DESC_DELAY with ramp_delay = 0 This patch fix crashes when using CPU DVFS. Signed-off-by: Philippe Simons <simons.philippe@gmail.com> Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717") Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: mscc: ocelot: perform error cleanup in ocelot_hwstamp_set()Vladimir Oltean
[ Upstream commit 43a4166349a254446e7a3db65f721c6a30daccf3 ] An unsupported RX filter will leave the port with TX timestamping still applied as per the new request, rather than the old setting. When parsing the tx_type, don't apply it just yet, but delay that until after we've parsed the rx_filter as well (and potentially returned -ERANGE for that). Similarly, copy_to_user() may fail, which is a rare occurrence, but should still be treated by unwinding what was done. Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: mscc: ocelot: be resilient to loss of PTP packets during transmissionVladimir Oltean
[ Upstream commit b454abfab52543c44b581afc807b9f97fc1e7a3a ] The Felix DSA driver presents unique challenges that make the simplistic ocelot PTP TX timestamping procedure unreliable: any transmitted packet may be lost in hardware before it ever leaves our local system. This may happen because there is congestion on the DSA conduit, the switch CPU port or even user port (Qdiscs like taprio may delay packets indefinitely by design). The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(), runs out of timestamp IDs eventually, because it never detects that packets are lost, and keeps the IDs of the lost packets on hold indefinitely. The manifestation of the issue once the entire timestamp ID range becomes busy looks like this in dmesg: mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp At the surface level, we need a timeout timer so that the kernel knows a timestamp ID is available again. But there is a deeper problem with the implementation, which is the monotonically increasing ocelot_port->ts_id. In the presence of packet loss, it will be impossible to detect that and reuse one of the holes created in the range of free timestamp IDs. What we actually need is a bitmap of 63 timestamp IDs tracking which one is available. That is able to use up holes caused by packet loss, but also gives us a unique opportunity to not implement an actual timer_list for the timeout timer (very complicated in terms of locking). We could only declare a timestamp ID stale on demand (lazily), aka when there's no other timestamp ID available. There are pros and cons to this approach: the implementation is much more simple than per-packet timers would be, but most of the stale packets would be quasi-leaked - not really leaked, but blocked in driver memory, since this algorithm sees no reason to free them. An improved technique would be to check for stale timestamp IDs every time we allocate a new one. Assuming a constant flux of PTP packets, this avoids stale packets being blocked in memory, but of course, packets lost at the end of the flux are still blocked until the flux resumes (nobody left to kick them out). Since implementing per-packet timers is way too complicated, this should be good enough. Testing procedure: Persistently block traffic class 5 and try to run PTP on it: $ tc qdisc replace dev swp3 parent root taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0xdf 100000 flags 0x2 [ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS $ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3 ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[70.406]: timed out while polling for tx timestamp ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[70.406]: port 1 (swp3): send peer delay response failed ptp4l[70.407]: port 1 (swp3): clearing fault immediately ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1 ptp4l[71.400]: timed out while polling for tx timestamp ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[71.401]: port 1 (swp3): send peer delay response failed ptp4l[71.401]: port 1 (swp3): clearing fault immediately [ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2 ptp4l[72.401]: timed out while polling for tx timestamp ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[72.402]: port 1 (swp3): send peer delay response failed ptp4l[72.402]: port 1 (swp3): clearing fault immediately ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3 ptp4l[73.400]: timed out while polling for tx timestamp ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[73.400]: port 1 (swp3): send peer delay response failed ptp4l[73.400]: port 1 (swp3): clearing fault immediately [ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4 ptp4l[74.400]: timed out while polling for tx timestamp ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[74.401]: port 1 (swp3): send peer delay response failed ptp4l[74.401]: port 1 (swp3): clearing fault immediately ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[75.410]: timed out while polling for tx timestamp ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[75.411]: port 1 (swp3): send peer delay response failed ptp4l[75.411]: port 1 (swp3): clearing fault immediately (...) Remove the blocking condition and see that the port recovers: $ same tc command as above, but use "sched-entry S 0xff" instead $ same ptp4l command as above ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost [ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost [ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost [ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost [ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d ptp4l[104.966]: port 1 (swp3): assuming the grand master role ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER [ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0 (...) Notice that in this new usage pattern, a non-congested port should basically use timestamp ID 0 all the time, progressing to higher numbers only if there are unacknowledged timestamps in flight. Compare this to the old usage, where the timestamp ID used to monotonically increase modulo OCELOT_MAX_PTP_ID. In terms of implementation, this simplifies the bookkeeping of the ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse the list of two-step timestampable skbs for each new packet anyway, the information can already be computed and does not need to be stored. Also, ocelot_port->tx_skbs is always accessed under the switch-wide ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's lock and can use the unlocked primitives safely. This problem was actually detected using the tc-taprio offload, and is causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959) supports but Ocelot (VSC7514) does not. Thus, I've selected the commit to blame as the one adding initial timestamping support for the Felix switch. Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19net: mscc: ocelot: ocelot->ts_id_lock and ocelot_port->tx_skbs.lock are IRQ-safeVladimir Oltean
[ Upstream commit 0c53cdb95eb4a604062e326636971d96dd9b1b26 ] ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler(). As such, it runs with IRQs enabled, and not in hardirq context. Thus, ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot be preempted by ocelot_get_txtstamp(). For the same reason, dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in this calling context, so just simplify the dev_kfree_skb_any() call to kfree_skb(). Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context, not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs. This is part of a larger rework of the TX timestamping procedure. A logical subportion of the rework has been split into a separate change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: b454abfab525 ("net: mscc: ocelot: be resilient to loss of PTP packets during transmission") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 09:57:10 +0000