| Age | Commit message (Collapse) | Author |
|---|
|
EN7581 ethernet SoC supports 4 programmable IRQ lines each one composed
by 4 IRQ configuration registers. Add airoha_irq_bank struct as a
container for independent IRQ lines info (e.g. IRQ number, enabled source
interrupts, ecc). This is a preliminary patch to support multiple IRQ lines
in airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250418-airoha-eth-multi-irq-v1-1-1ab0083ca3c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ae866b71-c904-434e-befb-848c831e33ff@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0baad123-c679-4154-923f-fdc12783e900@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handling of both chip versions is the same, only difference is
the firmware. So we can merge handling of both chip versions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/97d7ae79-d021-4b6b-b424-89e5e305b029@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of these functions depend on PHYLIB or select it directly
or indirectly by selecting PHYLINK. Stubs make sense for optional
functionality, but that's not the case here.
MDIO_XGENE usually is selected by NET_XGENE which also selects PHYLIB.
Add a dependency to PHYLIB nevertheless, in order not to break
randconfig builds.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/f7a69a1f-60e9-4ac0-8b7c-481e0cc850e7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thierry states that there are prerequists for Tegra's calibration
that should be met before starting calibration - both the RGMII and
MDIO interfaces should be idle.
This commit adds the necessary MII bus locking to ensure that the MDIO
interface is idle during calibration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/E1u7EYR-001ZAS-Cr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CONFIG_DEFAULT_HUNG_TASK_TIMEOUT setting is only available when the
hung task detection is enabled, otherwise the code now produces a build
failure:
drivers/net/ethernet/broadcom/bnxt/bnxt.c:10188:21: error: use of undeclared identifier 'CONFIG_DEFAULT_HUNG_TASK_TIMEOUT'
10188 | max_tmo_secs > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT) {
Enclose this warning logic in an #ifdef to ensure this builds.
Fixes: 0fcad44a86bd ("bnxt_en: Change FW message timeout warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250423162827.2189658-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"A small number of fixes:
- virtgpu is exempt from reset shutdown fow now - a more complete fix
is in the works
- spec compliance fixes in:
- virtio-pci cap commands
- vhost_scsi_send_bad_target
- virtio console resize
- missing locking fix in vhost-scsi
- virtio ring - a KCSAN false positive fix
- VHOST_*_OWNER documentation fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Fix vhost_scsi_send_status()
vhost-scsi: Fix vhost_scsi_send_bad_target()
vhost-scsi: protect vq->log_used with vq->mutex
vhost_task: fix vhost_task_create() documentation
virtio_console: fix order of fields cols and rows
virtio_console: fix missing byte order handling for cols and rows
virtgpu: don't reset on shutdown
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
vhost: fix VHOST_*_OWNER documentation
virtio_pci: Use self group type for cap commands
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
This patch restores the missing initialization
to ensure proper handler registration.
Fixes: 6895d74c11d8 ("wifi: iwlwifi: mld: initialize regulatory early")
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423092503.35206-1-itamar.shalev@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.
Make sure that we understand that those platforms have powered off the
device.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Perhaps IWL_FW_CHECK() is a bit misnamed, but it just returns
the value of the inner condition. Therefore, the current code
skips the actual function when it has the BAID data and makes
it crash later when it doesn't. Fix the logic.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.9c0b84c44c3b.Ied236258854b149960eb357ec61bf3a572503fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When errors occur repeatedly, the driver shouldn't go into a
tight loop trying to reset the device. Implement the backoff
I had already defined IWL_TRANS_RESET_DELAY for, but clearly
forgotten the implementation of.
Fixes: 9a2f13c40c63 ("wifi: iwlwifi: implement reset escalation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When mac80211 switches between non-MLO and MLO it will recreate the
debugfs directories. This results in the add_if_debugfs handler being
called multiple times. As the convenience symlink is created in the mld
debugfs directory and not the vif, it will not be removed by mac80211
when this happens and still exists.
Add a check and only create the convenience symlink if we have not yet
done so.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.2490696f032a.I74319c7cf18f7e16a3d331cb96e38504b9fbab66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.3331d1686556.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.1a8579662437.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 75a3313f52b7e08e7e73746f69a68c2b7c28bb2b.
The indication of the BW limitation in the sub-device ID is not applicable
for Killer devices. For those devices, bw_limit will hold a random value,
so a matching dev_info might not be found, which leads to a probe
failure.
Until it is properly fixed, revert this.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.36dd3007151e.I66b6b78db09bfea12ae84dd85603cf1583271474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 16a8d9a739430bec9c11eda69226c5a39f3478aa.
This device needs commit 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic"),
which has a bug and is being reverted until it is fixed.
Since this device wasn't shipped yet it is ok to not support it.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 16a8d9a73943 ("wifi: iwlwifi: add support for BE213")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.581160ae3e4b.Icecc46baee8a797c00ad04fab92d7d1114b84829@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with
netdev->lock") introduces the netdev lock to xdp_set_features_flag().
The change includes a _locked version of the method, as it is possible
for a driver to have already acquired the netdev lock before calling
this helper. However, the same applies to
xdp_features_(set|clear)_redirect_flags(), which ends up calling the
unlocked version of xdp_set_features_flags() leading to deadlocks in
GVE, which grabs the netdev lock as part of its suspend, reset, and
shutdown processes:
[ 833.265543] WARNING: possible recursive locking detected
[ 833.270949] 6.15.0-rc1 #6 Tainted: G E
[ 833.276271] --------------------------------------------
[ 833.281681] systemd-shutdow/1 is trying to acquire lock:
[ 833.287090] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: xdp_set_features_flag+0x29/0x90
[ 833.295470]
[ 833.295470] but task is already holding lock:
[ 833.301400] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
[ 833.309508]
[ 833.309508] other info that might help us debug this:
[ 833.316130] Possible unsafe locking scenario:
[ 833.316130]
[ 833.322142] CPU0
[ 833.324681] ----
[ 833.327220] lock(&dev->lock);
[ 833.330455] lock(&dev->lock);
[ 833.333689]
[ 833.333689] *** DEADLOCK ***
[ 833.333689]
[ 833.339701] May be due to missing lock nesting notation
[ 833.339701]
[ 833.346582] 5 locks held by systemd-shutdow/1:
[ 833.351205] #0: ffffffffa9c89130 (system_transition_mutex){+.+.}-{4:4}, at: __se_sys_reboot+0xe6/0x210
[ 833.360695] #1: ffff93b399e5c1b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xb4/0x1f0
[ 833.369144] #2: ffff949d19a471b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xc2/0x1f0
[ 833.377603] #3: ffffffffa9eca050 (rtnl_mutex){+.+.}-{4:4}, at: gve_shutdown+0x33/0x90 [gve]
[ 833.386138] #4: ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve]
Introduce xdp_features_(set|clear)_redirect_target_locked() versions
which assume that the netdev lock has already been acquired before
setting the XDP feature flag and update GVE to use the locked version.
Fixes: 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250422011643.3509287-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ndo_features_check to restrict Tx checksum offload flags, since
there are some inner layer length and protocols unsupported.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250421022956.508018-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tunnel types VXLAN/VXLAN_GPE/GENEVE are supported for txgbe devices. The
hardware supports to set only one port for each tunnel type.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250421022956.508018-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ppp_exit_net() unregisters devices related to the netns under
RTNL and destroys lists and IDR.
Let's use ->exit_rtnl() for the device unregistration part to
save RTNL dances for each netns.
Note that we delegate the for_each_netdev_safe() part to
default_device_exit_batch() and replace unregister_netdevice_queue()
with ppp_nl_dellink() to align with bond, geneve, gtp, and pfcp.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418003259.48017-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pfcp_net_exit() holds RTNL and cleans up all devices in the netns
and other devices tied to sockets in the netns.
We can use ->exit_rtnl() to save RTNL dance for all dying netns.
Note that we delegate the for_each_netdev() part to
default_device_exit_batch() to avoid a list corruption splat
like the one reported in commit 4ccacf86491d ("gtp: Suppress
list corruption splat in gtp_net_exit_batch_rtnl().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250418003259.48017-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert visconti to use the set_clk_tx_rate() method. By doing so,
the GMAC control register will already have been updated (unlike with
the fix_mac_speed() method) so this code can be removed while porting
to the set_clk_tx_rate() method.
There is also no need for the spinlock, and has never been - neither
fix_mac_speed() nor set_clk_tx_rate() can be called by more than one
thread at a time, so the lock does nothing useful.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u5SiQ-001I0B-OQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't populate the read-only array offsets on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250417161353.490219-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change hardware configuration for the NETSYSv3.
- Enable PSE dummy page mechanism for the GDM1/2/3
- Enable PSE drop mechanism when the WDMA Rx ring full
- Enable PSE no-drop mechanism for packets from the WDMA Tx
- Correct PSE free drop threshold
- Correct PSE CDMA high threshold
Fixes: 1953f134a1a8b ("net: ethernet: mtk_eth_soc: add NETSYS_V3 version support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b71f8fd9d4bb69c646c4d558f9331dd965068606.1744907886.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the DWMAC glue layer for the GBETH IP found in the Renesas RZ/V2H(P)
SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20250417084015.74154-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417074643.81448-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the review by Bill Cox [1], the Atmel SHA204A random number
generator produces random numbers with very low entropy.
Set the lowest possible entropy for this chip just to be safe.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
Fixes: da001fb651b00e1d ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When pausing rx (e.g. set up xdp, xsk pool, rx resize), we call
napi_disable() on the receive queue's napi. In delayed refill_work, it
also calls napi_disable() on the receive queue's napi. When
napi_disable() is called on an already disabled napi, it will sleep in
napi_disable_locked while still holding the netdev_lock. As a result,
later napi_enable gets stuck too as it cannot acquire the netdev_lock.
This leads to refill_work and the pause-then-resume tx are stuck
altogether.
This scenario can be reproducible by binding a XDP socket to virtio-net
interface without setting up the fill ring. As a result, try_fill_recv
will fail until the fill ring is set up and refill_work is scheduled.
This commit adds virtnet_rx_(pause/resume)_all helpers and fixes up the
virtnet_rx_resume to disable future and cancel all inflights delayed
refill_work before calling napi_disable() to pause the rx.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250417072806.18660-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485a3 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 15's new -Wunterminated-string-initialization notices that the 32
character "flash_cookie" (which is not used as a C-String)
needs to be marked as "nonstring":
drivers/net/ethernet/emulex/benet/be_cmds.c:2618:51: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
2618 | static char flash_cookie[2][16] = {"*** SE FLAS", "H DIRECTORY *** "};
| ^~~~~~~~~~~~~~~~~~
Add this annotation, avoid using a multidimensional array, but keep the
string split (with a comment about why). Additionally mark it const
and annotate the "cookie" member that is being memcmp()ed against as
nonstring too.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416221028.work.967-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dp83822 provides the possibility to set the resistance value of the
the MAC termination. Modifying the resistance to an appropriate value can
reduce signal reflections and therefore improve signal quality.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-4-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper which returns the MAC termination resistance value. Modifying
the resistance to an appropriate value can reduce signal reflections and
therefore improve signal quality.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250416-dp83822-mac-impedance-v3-3-028ac426cddb@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use pci_prepare_to_sleep() like PCI core does in pci_pm_suspend_noirq.
This aligns setting a low-power mode during shutdown with the handling
of the transition to system suspend. Also the transition to runtime
suspend uses pci_target_state() instead of setting D3hot unconditionally.
Note: pci_prepare_to_sleep() uses device_may_wakeup() to check whether
device may generate wakeup events. So we don't lose anything by
not passing tp->saved_wolopts any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/f573fdbd-ba6d-41c1-b68f-311d3c88db2c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last use of rvu_npc_enable_bcast_entry() was removed in 2021 by
commit 967db3529eca ("octeontx2-af: add support for multicast/promisc
packet replication feature")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250420225810.171852-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When WoL is enabled, we update the software state in phylink to
indicate that the link is down, and disable the resolver from
bringing the link back up.
On resume, we attempt to bring the overall state into consistency
by calling the .mac_link_down() method, but this is wrong if the
link was already down, as phylink strictly orders the .mac_link_up()
and .mac_link_down() methods - and this would break that ordering.
Fixes: f97493657c63 ("net: phylink: add suspend/resume support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for ndo_setup_tc to enable CBS offload functionality as
part of traffic control configuration for network devices, where CBS
is applied from the CPU to the switch. More specifically, CBS is
applied at the GMAC in the topmost architecture diagram.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416115757.28156-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With lan88xx based devices the lan78xx driver can get stuck in an
interrupt loop while bringing the device up, flooding the kernel log
with messages like the following:
lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped
Removing interrupt support from the lan88xx PHY driver forces the
driver to use polling instead, which avoids the problem.
The issue has been observed with Raspberry Pi devices at least since
4.14 (see [1], bug report for their downstream kernel), as well as
with Nvidia devices [2] in 2020, where disabling interrupts was the
vendor-suggested workaround (together with the claim that phylib
changes in 4.9 made the interrupt handling in lan78xx incompatible).
Iperf reports well over 900Mbits/sec per direction with client in
--dualtest mode, so there does not seem to be a significant impact on
throughput (lan88xx device connected via switch to the peer).
[1] https://github.com/raspberrypi/linux/issues/2447
[2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11
Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch
Fixes: 792aec47d59d ("add microchip LAN88xx phy driver")
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: kernel-list@raspberrypi.com
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make the CMIS module type's page 17 channel data available for
ethtool to request. As done previously, carve space for this
data from the port_info reserved space.
In the future, if additional pages are needed, a new firmware
AdminQ command will be added for accessing random pages.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-4-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the newer get_module_eeprom_by_page interface.
Only the upper half of the 256 byte page is available for
reading, and the firmware puts the two sections into the
extended sprom buffer, so a union is used over the extended
sprom buffer to make clear which page is to be accessed.
With get_module_eeprom_by_page implemented there is no need
for the older get_module_info or git_module_eeprom interfaces,
so remove them.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-3-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some QSFP modules have more eeprom to be read by ethtool than
the initial high and low page 0 that is currently available
in the DSC's ionic sprom[] buffer. Since the current sprom[]
is baked into the middle of an existing API struct, to make
the high end of page 1 and page 2 available a block is carved
from a reserved space of the existing port_info struct and the
ionic_get_module_eeprom() service is taught how to get there.
Newer firmware writes the additional QSFP page info here,
yet this remains backward compatible because older firmware
sets this space to all 0 and older ionic drivers do not use
the reserved space.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415231317.40616-2-shannon.nelson@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
FDB entries are currently stored in a hash table with a fixed number of
buckets (256), resulting in performance degradation as the number of
entries grows. Solve this by converting the driver to use rhashtable
which maintains more or less constant performance regardless of the
number of entries.
Measured transmitted packets per second using a single pktgen thread
with varying number of entries when the transmitted packet always hits
the default entry (worst case):
Number of entries | Improvement
------------------|------------
1k | +1.12%
4k | +9.22%
16k | +55%
64k | +585%
256k | +2460%
In addition, the change reduces the size of the VXLAN device structure
from 2584 bytes to 672 bytes.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In preparation for converting the FDB table to rhashtable, introduce a
key structure that includes the MAC address and source VNI.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-15-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
FDB entries are allocated in an atomic context as they can be added from
the data path when learning is enabled.
After converting the FDB hash table to rhashtable, the insertion rate
will be much higher (*) which will entail a much higher rate of per-CPU
allocations via dst_cache_init().
When adding a large number of entries (e.g., 256k) in a batch, a small
percentage (< 0.02%) of these per-CPU allocations will fail [1]. This
does not happen with the current code since the insertion rate is low
enough to give the per-CPU allocator a chance to asynchronously create
new chunks of per-CPU memory.
Given that:
a. Only a small percentage of these per-CPU allocations fail.
b. The scenario where this happens might not be the most realistic one.
c. The driver can work correctly without dst caches. The dst_cache_*()
APIs first check that the dst cache was properly initialized.
d. The dst caches are not always used (e.g., 'tos inherit').
It seems reasonable to not treat these allocation failures as fatal.
Therefore, do not bail when dst_cache_init() fails and suppress warnings
by specifying '__GFP_NOWARN'.
[1] percpu: allocation failed, size=40 align=8 atomic=1, atomic alloc failed, no space left
(*) 97% reduction in average latency of vxlan_fdb_update() when adding
256k entries in a batch.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-14-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
__vxlan_find_mac() is called from both the data path (e.g., during
learning) and the control path (e.g., when replacing an entry). The
function is missing lockdep annotations to make sure that the FDB hash
lock is held during FDB updates.
Rename __vxlan_find_mac() to vxlan_find_mac_rcu() to reflect the fact
that it should be called from an RCU read-side critical section and call
it from vxlan_find_mac() which checks that the FDB hash lock is held.
Change callers to invoke the appropriate function.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-13-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vxlan_find_mac() is only expected to be called from the Tx path as it
updates the 'used' timestamp. Rename it to vxlan_find_mac_tx() to
reflect that and to avoid incorrect updates of this timestamp like those
addressed by commit 9722f834fe9a ("vxlan: Avoid unnecessary updates to
FDB 'used' time").
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-12-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of holding the FDB hash lock when traversing the FDB linked list
during flushing, use RCU and only acquire the lock for entries that need
to be flushed.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250415121143.345227-11-idosch@nvidia.com
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
