| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Lots of Qualcomm and Rockchip device support.
New Support:
- Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and
PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY
- Rockchip rk3576 combo phy support
Updates:
- Drop Shengyang for JH7110 maintainer
- Freescale hdmi register calculation optimization
- Rockchip pcie phy mutex and regmap updates"
* tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits)
dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY
phy: rockchip: phy-rockchip-typec: Fix Copyright description
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs
phy: qcom-qusb2: Add support for QCS615
dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
phy: core: Simplify API of_phy_simple_xlate() implementation
phy: sun4i-usb: Remove unused of_gpio.h
phy: HiSilicon: Don't use "proxy" headers
phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle()
phy: qualcomm: qmp-pcie: add support for SAR2130P
phy: qualcomm: qmp-pcie: define several new registers
phy: qualcomm: qmp-pcie: split PCS_LANE1 region
phy: qualcomm: qmp-combo: add support for SAR2130P
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible
phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation
phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found
phy: freescale: fsl-samsung-hdmi: Expand Integer divider range
phy: rockchip-naneng-combo: add rk3576 support
dt-bindings: phy: rockchip: add rk3576 compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
|
|
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The function enters infinite recursion if the HCI device doesn't support
GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset...
btusb_reset shouldn't call hdev->reset after commit f07d478090b0
("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Fixes: f07d478090b0 ("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that have come in during the merge window: one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting"
* tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Add missing newline character
regulator: TPS6287X: Use min/max uV to get VRANGE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Three minor fixes"
* tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: update pvcalls_front_accept prototype
Grab mm lock before grabbing pt lock
xen: pcpu: remove unnecessary __ref annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A bunch of fixes that came in during the merge window, plus a few new
device IDs. The i.MX changes are a little large since they add some new
quirk data as well as device IDs, and the audio graph card change for
picking the correct endpoint for links is large due to updating a number
of call sites.
|
|
Compiling vmlogrdr with GCC 15 generates this warning:
CC [M] drivers/s390/char/vmlogrdr.o
drivers/s390/char/vmlogrdr.c:126:29: error: initializer-string for array
of ‘char’ is too long [-Werror=unterminated-string-initialization]
126 | { .system_service = "*LOGREC ",
Given that the system_service array intentionally contains a non-null
terminated string use an array initializer, instead of string
initializer to get rid of this warning.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Use the internal_name member of vmlogrdr_priv_t to print error messages
instead of the system_service member. The system_service member is not a
string, but a non-null terminated eight byte character array, which
contains the ASCII representation of a z/VM system service.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Commit 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the
resume phase") overlooked the case in which the parent of a device with
DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime-
suspended before a transition into a system-wide sleep state. In that
case, if the child is resumed during the subsequent transition from
that state into the working state, its runtime PM status will be set to
RPM_ACTIVE, but the runtime PM status of the parent will not be updated
accordingly, even though the parent will be resumed too, because of the
dev_pm_skip_suspend() check in device_resume_noirq().
Address this problem by tracking the need to set the runtime PM status
to RPM_ACTIVE during system-wide resume transitions for devices with
DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them.
Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/
Reported-by: Johan Hovold <johan@kernel.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net
|
|
The Airoha cpufreq depends on OF and must be marked as such. With the
kernel compiled without OF support, we get following warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: warning: 'airoha_cpufreq_match_list' defined but not used [-Wunused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501251941.0fXlcd1D-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/455e18c947bd9529701a2f1c796f0f934d1354d7.1738050679.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pcf2127 encodes BSM, BLD and power fail detection in the same set of
bits so it is necessary to do some calculation when changing BSM to keep
the rest of the configuration as-is. However, when BSM is disabled, there
is no configuration with BLD enabled so this will be lost when coming back
to a mode with BSM enabled.
Link: https://lore.kernel.org/r/20250127162728.86234-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull vfio updates from Alex Williamson:
- Extend vfio-pci 8-byte read/write support to include archs defining
CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs
around 64-bit accessors (Ramesh Thomas)
- Update vfio-pci shadow ROM handling and allow cached ROM from setup
data to be exposed as a functional ROM BAR region when available
(Yunxiang Li)
- Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell
hardware, conditionalizing the uncached BAR workaround for previous
generation hardware based on the presence of a flag in a new DVSEC
capability, and include a delay during probe for link training to
complete, a new requirement for GB devices (Ankit Agrawal)
* tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio:
vfio/nvgrace-gpu: Add GB200 SKU to the devid table
vfio/nvgrace-gpu: Check the HBM training and C2C link status
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
vfio/platform: check the bounds of read/write syscalls
vfio/pci: Expose setup ROM at ROM bar when needed
vfio/pci: Remove shadow ROM specific code paths
vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
|
|
This restores the original behavior that gets min/max freq from EDID and
only set DP/eDP connector as freesync capable if "sink device is capable
of rendering incoming video stream without MSA timing parameters", i.e.,
`allow_invalid_MSA_timing_params` is true. The condition was mistakenly
removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync
parser for DP").
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Alex Hung <alex.hung@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915
Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The following page fault was observed duringthe KFD process release.
In this particular error case, the HIP test (./MemcpyPerformance -h)
does not require the queue. As a result, the process_context_addr was
not assigned when the KFD process was released, ultimately leading to
this page fault during the execution of the function
kfd_process_dequeue_from_all_devices().
[345962.294891] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:153 vmid:0 pasid:0)
[345962.295333] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
[345962.295775] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000B33
[345962.296097] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[345962.296394] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1
[345962.296633] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x1
[345962.296876] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x3
[345962.297135] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x1
[345962.297377] amdgpu 0000:03:00.0: amdgpu: RW: 0x0
[345962.297682] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:169 vmid:0 pasid:0)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
the offset address of mmCLK5_spll_field_8 was incorrect for dcn35
which causes SSC not to be enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-An Chen <lo-an.chen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Aldebaran doesn't support querying MM activity percentage. Keep the
field as 0xFFs to mark it as unsupported.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
change the config of cgcg on gfx12
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
The purpose of halt_if_hws_hang is to preserve GPU state for driver
debugging when queue preemption fails. Issuing per-queue reset may
kill wavefronts which caused the preemption failure.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the tty/serial driver set of changes for 6.14-rc1. Nothing
major in here, it was delayed a bit due to a regression found in
linux-next which has now been reverted and verified that it is fixed.
Other than the reverts, highlights include:
- 8250 work to get the nbcon mode working (partially reverted)
- altera_jtaguart minor fixes
- fsl_lpuart minor updates
- sh-sci driver minor updatesa
- other tiny driver updates and cleanups
All of these have been in linux-next for a while, and now with no
reports of problems (thanks to the reverts)"
* tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (44 commits)
Revert "serial: 8250: Switch to nbcon console"
Revert "serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()""
serial: sh-sci: Increment the runtime usage counter for the earlycon device
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Drop __initdata macro for port_cfg
serial: kgdb_nmi: Remove unused knock code
tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN
tty: xilinx_uartps: split sysrq handling
serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
serial: 8250: Switch to nbcon console
serial: 8250: Provide flag for IER toggling for RS485
serial: 8250: Use high-level writing function for FIFO
serial: 8250: Use frame time to determine timeout
serial: 8250: Adjust the timeout for FIFO mode
tty: atmel_serial: Use of_property_present() for non-boolean properties
serial: sc16is7xx: Add polling mode if no IRQ pin is available
dt-bindings: serial: sc16is7xx: Add description for polling mode
tty: serial: atmel: make it selectable for ARCH_LAN969X
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
|
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When Tx/Rx FIFO size is not specified in advance, the driver checks if
the value is zero and sets the hardware capability value in functions
where that value is used.
Consolidate the check and settings into function stmmac_hw_init() and
remove redundant other statements.
If FIFO size is zero and the hardware capability also doesn't have upper
limit values, return with an error message.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Originally, the total NCM header size was computed as the sum of two
vaguely labelled constants. While accurate, it wasn't particularly clear
where they were coming from.
Use sizes of existing NCM structs where available. Define the total
NDP16 size based on the maximum amount of DPEs that can fit into the
iOS-specific fixed-size header.
This change does not fix any particular issue. Rather, it introduces
intermediate constants that will simplify subsequent commits.
It should also make it clearer for the reader where the constant values
come from.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce an rx_error label to reduce repetitions in the header
signature checks.
Store wDatagramIndex and wDatagramLength after endianness conversion to
avoid repeated le16_to_cpu() calls.
Rewrite the loop to return on a null trailing DPE, which is required
by the CDC NCM spec. In case it is missing, fall through to rx_error.
This change does not fix any particular issue. Its purpose is to
simplify a subsequent commit that fixes a potential OoB read by limiting
the maximum amount of processed DPEs.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By definition, a DPE points at the start of a network frame/datagram.
Thus it makes no sense for it to point at anything that's part of the
NCM header. It is not a security issue, but merely an indication of
a malformed DPE.
Enforce that all DPEs point at the data portion of the URB, past the
NCM header.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Originally, it was possible for the DPE length check to overflow if
wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB
read.
Move the wDatagramIndex term to the other side of the inequality.
An existing condition ensures that wDatagramIndex < urb->actual_length.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pointer arguments passed to ioctls need to pass through compat_ptr() to
work correctly on s390; as explained in Documentation/driver-api/ioctl.rst.
Detect compat mode at runtime and call compat_ptr() for those commands
which do take pointer arguments.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/1ba5d3a4-7931-455b-a3ce-85a968a7cb10@app.fastmail.com/
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250125-posix-clock-compat_ioctl-v2-1-11c865c500eb@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware.
Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len
set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to
ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to
write outside the allocated buffer, overwriting random memory.
While a ATA device is supposed to abort a ATA_NOP command, there does seem
to be a bug either in libata-sff or QEMU, where either this status is not
set, or the status is cleared before read by ata_sff_hsm_move().
Anyway, that is most likely a separate bug.
Looking at __atapi_pio_bytes(), it already has a safety check to ensure
that __atapi_pio_bytes() cannot write outside the allocated buffer.
Add a similar check to ata_pio_sector(), such that also ata_pio_sector()
cannot write outside the allocated buffer.
Cc: stable@vger.kernel.org
Reported-by: reveliofuzzing <reveliofuzzing@gmail.com>
Closes: https://lore.kernel.org/linux-ide/CA+-ZZ_jTgxh3bS7m+KX07_EWckSnW3N2adX3KV63y4g7M4CZ2A@mail.gmail.com/
Link: https://lore.kernel.org/r/20250127154303.15567-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Pull drm fixes from Simona Vetter:
"cgroup:
- fix Koncfig fallout from new dmem controller
Driver Changes:
- v3d NULL pointer regression fix in fence signalling race
- virtio: uaf in dma_buf free path
- xlnx: fix kerneldoc
- bochs: fix double-free on driver removal
- zynqmp: add missing locking to DP bridge driver
- amdgpu fixes all over:
- documentation, display, sriov, various hw block drivers
- use drm/sched helper
- mark some debug module options as unsafe
- amdkfd: mark some debug module options as unsafe, trap handler
updates, fix partial migration handling
DRM core:
- fix fbdev Kconfig select rules, improve tiled-based display
support"
* tag 'drm-next-2025-01-27' of https://gitlab.freedesktop.org/drm/kernel: (40 commits)
drm/amd/display: Optimize cursor position updates
drm/amd/display: Add hubp cache reset when powergating
drm/amd/amdgpu: Enable scratch data dump for mes 12
drm/amd: Clarify kdoc for amdgpu.gttsize
drm/amd/amdgpu: Prevent null pointer dereference in GPU bandwidth calculation
drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed
drm/amdgpu: fix ring timeout issue in gfx10 sr-iov environment
drm/amd/pm: Fix smu v13.0.6 caps initialization
drm/amd/pm: Refactor SMU 13.0.6 SDMA reset firmware version checks
revert "drm/amdgpu/pm: add definition PPSMC_MSG_ResetSDMA2"
revert "drm/amdgpu/pm: Implement SDMA queue reset for different asic"
drm/amd/pm: Add capability flags for SMU v13.0.6
drm/amd/display: fix SUBVP DC_DEBUG_MASK documentation
drm/amd/display: fix CEC DC_DEBUG_MASK documentation
drm/amdgpu: fix the PCIe lanes reporting in the INFO IOCTL
drm/amdgpu: cache gpu pcie link width
drm/amd/display: mark static functions noinline_for_stack
drm/amdkfd: Clear MODE.VSKIP in gfx9 trap handler
drm/amdgpu: Refine ip detection log message
drm/amdgpu: Add handler for SDMA context empty
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- fix a spelling error in dm-raid
- change kzalloc to kcalloc
- remove useless test in alloc_multiple_bios
- disable REQ_NOWAIT for flushes
- dm-transaction-manager: use red-black trees instead of linear lists
- atomic writes support for dm-linear, dm-stripe and dm-mirror
- dm-crypt: code cleanups and two bugfixes
* tag 'for-6.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: track tag_offset in convert_context
dm-crypt: don't initialize cc_sector again
dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit()
dm-crypt: use bi_sector in bio when initialize integrity seed
dm-crypt: fully initialize clone->bi_iter in crypt_alloc_buffer()
dm-crypt: set atomic as false when calling crypt_convert() in kworker
dm-mirror: Support atomic writes
dm-io: Warn on creating multiple atomic write bios for a region
dm-stripe: Enable atomic writes
dm-linear: Enable atomic writes
dm: Ensure cloned bio is same length for atomic write
dm-table: atomic writes support
dm-transaction-manager: use red-black trees instead of linear lists
dm: disable REQ_NOWAIT for flushes
dm: remove useless test in alloc_multiple_bios
dm: change kzalloc to kcalloc
dm raid: fix spelling errors in raid_ctr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the pretty small staging driver tree update for 6.14-rc1. Not
much happened this development cycle:
- deleted some unused ioctl code from the rtl8723bs driver
- gpib driver cleanups and fixes
- other tiny minor coding style fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (38 commits)
staging: gpib: Agilent usb code cleanup
staging: gpib: Fix NULL pointer dereference in detach
staging: gpib: Fix inadvertent negative shift
staging: gpib: fix prefixing 0x with decimal output
staging: gpib: Use C99 syntax and make static
staging: gpib: Avoid plain integers as NULL pointers
staging: gpib: Use __user for user space pointers
staging: gpib: Use __iomem attribute for io addresses
staging: gpib: Add missing mutex unlock in ni usb driver
staging: gpib: Add missing mutex unlock in agilent usb driver
staging: gpib: Modernize gpib_interface_t initialization and make static
staging: gpib: Remove commented-out debug code
staging: rtl8723bs: Remove ioctl interface
staging: gpib: tnt4882: Handle gpib_register_driver() errors
staging: gpib: pc2: Handle gpib_register_driver() errors
staging: gpib: ni_usb: Handle gpib_register_driver() errors
staging: gpib: lpvo_usb: Return error value from gpib_register_driver()
staging: gpib: ines: Handle gpib_register_driver() errors
staging: gpib: hp_82341: Handle gpib_register_driver() errors
staging: gpib: hp_82335: Return error value from gpib_register_driver()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-24 (idpf, ice, iavf)
For idpf:
Emil adds memory barrier when accessing control queue descriptors and
restores call to idpf_vc_xn_shutdown() when resetting.
Manoj Vishwanathan expands transaction lock to properly protect xn->salt
value and adds additional debugging information.
Marco Leogrande converts workqueues to be unbound.
For ice:
Przemek fixes incorrect size use for array.
Mateusz removes reporting of invalid parameter and value.
For iavf:
Michal adjusts some VLAN changes to occur without a PF call to avoid
timing issues with the calls.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: allow changing VLAN state without calling PF
ice: remove invalid parameter of equalizer
ice: fix ice_parser_rt::bst_key array size
idpf: add more info during virtchnl transaction timeout/salt mismatch
idpf: convert workqueues to unbound
idpf: Acquire the lock before accessing the xn->salt
idpf: fix transaction timeouts on reset
idpf: add read memory barrier when checking descriptor done bit
====================
Link: https://patch.msgid.link/20250124213213.1328775-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes.
Conor Dooley found and fixed a problem in the pwm-microchip-core
driver that existed since the driver's birth in v6.5-rc1. It's about a
corner case that only happens if two pwm devices of the same chip are
set to the same long period.
The other problem is about the new pwm API that currently is only
supported by two hardware drivers. The fix prevents a NULL pointer
exception if one of the new functions is called for a pwm device with
a driver that only provides the old callbacks"
* tag 'pwm/for-6.14-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Ensure callbacks exist before calling them
pwm: microchip-core: fix incorrect comparison with max period
|
