| Age | Commit message (Collapse) | Author |
|---|
|
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII
if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps"
override exists. The negative error code from phy_get_internal_delay()
does not get overridden with the delay deduced from the phy-mode, and
later gets committed to hardware. Also, the rx_delay gets overridden by
what should have been the tx_delay.
Fixes: dbb050d2bfc8 ("phy: mscc: Add support for RGMII delay configuration")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230627134235.3453358-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-23-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-19-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-12-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-10-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-5-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use vmalloc_array and vcalloc to protect against
multiplication overflows.
The changes were done using the following Coccinelle
semantic patch:
// <smpl>
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230627144339.144478-3-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible that the next available path we failover to, happens to
be frozen (for example if it is during connection establishment). If
the original I/O was set with NOWAIT, this cause the I/O to unnecessarily
fail because the request queue cannot be entered, hence the I/O fails with
EAGAIN.
The NOWAIT restriction that was originally set for the I/O is no longer
relevant or needed because this is the nvme requeue context. Hence we
clear the REQ_NOWAIT flag when failing over I/O.
This fix a simple test case of nvme controller reset during I/O when the
multipath device that has only a single path and I/O fails with "Resource
temporarily unavailable" errno. Note that this reproduces with io_uring
which by default sets IOCB_NOWAIT by default.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Correctly spell "Zeroes" in nvme_cmd_write_zeroes command name.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 896e97bf99ec ("ACPI: EC: Clear GPE on interrupt handling only")
broke suspend-to-idle at least on Dell XPS13 9360 and 9380.
The problem is that acpi_ec_dispatch_gpe() must clear the EC GPE,
because the EC GPE handler never runs when the system is in the
suspend-to-idle state and if the EC GPE is not cleared by the suspend-
to-idle loop, it is never cleared at all which leads to a GPE storm.
This causes suspend-to-idle to burn energy instead of saving it which
is potentially dangerous (the affected machines heat up rather badly
when that happens).
Addess this by making acpi_ec_dispatch_gpe() clear the EC GPE as it did
before.
Fixes: 896e97bf99ec ("ACPI: EC: Clear GPE on interrupt handling only")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for generation of interrupts from the device directly to the
VM to the VCPU thus avoiding the overhead on the host CPU.
When supported, the driver will attempt to allocate vectors for each
data virtqueue. If a vector for a virtqueue cannot be provided it will
use the QP mode where notifications go through the driver.
In addition, we add a shutdown callback to make sure allocated
interrupts are released in case of shutdown to allow clean shutdown.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Message-Id: <20230607190007.290505-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add the documentation and Kconfig entry for pds_vdpa driver.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-12-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Register for the pds_core's notification events, primarily to
find out when the FW has been reset so we can pass this on
back up the chain.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-11-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is the vDPA device support, where we advertise that we can
support the virtio queues and deal with the configuration work
through the pds_core's adminq.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230519215632.12343-10-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
These are the adminq commands that will be needed for
setting up and using the vDPA device. There are a number
of commands defined in the FW's API, but by making use of
the FW's virtio BAR we only need a few of these commands
for vDPA support.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-9-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Prep and use the "modern" virtio bar utilities to get our
virtio config space ready.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-8-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Find the vDPA management information from the DSC in order to
advertise it to the vdpa subsystem.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-7-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is the initial auxiliary driver framework for a new vDPA
device driver, an auxiliary_bus client of the pds_core driver.
The pds_core driver supplies the PCI services for the VF device
and for accessing the adminq in the PF device.
This patch adds the very basics of registering for the auxiliary
device and setting up debugfs entries.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to specify a different DMA mask. This adds a dma_mask
field to struct virtio_pci_modern_device. If defined by the driver,
this mask will be used in a call to dma_set_mask_and_coherent() instead
of the traditional DMA_BIT_MASK(64). This allows limiting the DMA space
on vendor devices with address limitations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to check for a different device id. This adds a function
pointer field to struct virtio_pci_modern_device to specify an override
device id check. If defined by the driver, this function will be called
to check that the PCI device is the vendor's expected device, and will
return the found device id to be stored in mdev->id.device. This allows
vendors with alternative vendor device ids to use this library on their
own device BAR.
Note: A lot of the diff in this is simply indenting the existing code
into an else block.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Improve the size of the virtio_pci_device structure, which is commonly
used to represent a virtio PCI device. A given virtio PCI device can
either of legacy type or modern type, with the
struct virtio_pci_legacy_device occupying 32 bytes and the
struct virtio_pci_modern_device occupying 88 bytes. Make them a union,
thereby save 32 bytes of memory as shown by the pahole tool. This
improvement is particularly beneficial when dealing with numerous
devices, as it helps conserve memory resources.
Before the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
struct virtio_pci_legacy_device ldev; /* 824 32 */
/* --- cacheline 13 boundary (832 bytes) was 24 bytes ago --- */
struct virtio_pci_modern_device mdev; /* 856 88 */
/* XXX last struct has 4 bytes of padding */
[...]
/* size: 1056, cachelines: 17, members: 19 */
[...]
};
After the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
union {
struct virtio_pci_legacy_device ldev; /* 824 32 */
struct virtio_pci_modern_device mdev; /* 824 88 */
}; /* 824 88 */
[...]
/* size: 1024, cachelines: 16, members: 18 */
[...]
};
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230516135446.16266-1-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The referenced patch calls set_vq_affinity without checking if the op is
valid. This patch adds the check.
Fixes: 3dad56823b53 ("virtio-vdpa: Support interrupt affinity spreading mechanism")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230504135053.2283816-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Feng Liu <feliu@nvidia.com>
|
|
The callback sends a resume command to the DPU through
the control mechanism.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230502131048.61134-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20230511175451.282096-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
VIRTIO_CONFIG_S_FAILED indicates the guest driver has given up
the device due to fatal errors. So it is the guest decision,
the vendor driver should not set this status to the device.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-6-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit synchronize irqs of the virtqueues
and config space in the reset routine.
Thus ifcvf_stop() and reset() are refactored as well.
This commit renames ifcvf_stop_hw() to ifcvf_stop()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-5-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rather than former lazy-initialization mechanism,
now the virtqueue operations and driver_features related
ops access the virtio registers directly to take
immediate actions. So ifcvf_start_datapath() should
retire.
ifcvf_add_status() is retierd because we should not change
device status by a vendor driver's decision, this driver should
only set device status which is from virito drivers
upon vdpa_ops.set_status()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit implements a new function ifcvf_get_driver_feature()
which read driver_features from virtio registers.
To be less ambiguous, ifcvf_set_features() is renamed to
ifcvf_set_driver_features(), and ifcvf_get_features()
is renamed to ifcvf_get_dev_features() which returns
the provisioned vDPA device features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In this commit, virtqueue operations including:
set_vq_num(), set_vq_address(), set_vq_ready()
and get_vq_ready() access PCI registers directly
to take immediate actions.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add RmNet support for LARA-R6 01B.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230626125336.3127-1-davide.tronchin.94@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.
However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.
This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.
Fixes: 4444f8541dad16fe ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
ipvlan_queue_xmit() should return NET_XMIT_XXX, but
ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX
in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED
in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to
NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or
NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase
both ipvlan and ipvlan->phy_dev drops counter.
The skb to forward can be treated as xmitted successfully. This patch
makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
LoongArch architecture changes for 6.5 depend on the irq changes
to work on both ACPI and FDT systems, so merge them to create a base.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Support Pin Assignment D in getting mux state
- Emit an uevent when EC panics so that userland programs get chance
to capture EC coredumps (LPC interface only)
- Send EC_CMD_HOST_SLEEP_EVENT to EC at the very beginning/end of
system suspend/resume so that EC can watch the duration more
accurately (LPC interface only)
Misc:
- Switch back from I2C .probe_new() to .probe()
- Use %*ph for printing hexdump of small buffers"
* tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small buffer
platform/chrome: Switch i2c drivers back to use .probe()
platform/chrome: cros_ec_lpc: Move host command to prepare/complete
platform/chrome: cros_ec: Report EC panic as uevent
platform/chrome: cros_typec_switch: Add Pin D support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These extend the int340x thermal driver, add thermal DT bindings for
some Qcom platforms, add DT bindings and support for Armada AP807 and
MSM8909, allow selecting the bang-bang thermal governor as the default
one, address issues in several thermal drivers for ARM platforms and
clean up code.
Specifics:
- Add new IOCTLs to the int340x thermal driver to allow user space to
retrieve the Passive v2 thermal table (Srinivas Pandruvada)
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
(Konrad Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Clean up and fix the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only
described sensors and add the version 2.1 on the Qoriq sensor (Peng
Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)"
* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/stm32: Convert to platform remove callback returning void
net/mlx5: Update the driver with the recent thermal changes
thermal/drivers/armada: Add support for AP807 thermal data
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/qoriq: Support version 2.1
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: No need to program site adjustment register
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of notifications in ACPI button drivers (to
enable future simplifications and cleanups), clean up the ACPI thermal
driver, update the ACPI backlight driver, add quirks working around
AML bugs on some systems, fix some assorted issues and clean up code.
Specifics:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki)
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello)
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann)
- Drop several ACPI resource management quirks related to IRQ
ovverides on AMD "Zen" systems (Mario Limonciello)
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella)
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
vendor backlight control on relatively recent systems (Hans de
Goede)
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede)
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann)
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki)
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki)
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang)
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin)
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"
* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
ACPI: APEI: mark bert_disable as __initdata
ACPI: EC: Clear GPE on interrupt handling only
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: resource: Remove "Zen" specific match and quirks
...
|
|
fa155f4f8348 ("OPP: Use dev_err_probe() when failing to get icc_path")
failed to actually use the error it was trying to log:
smatch warnings:
drivers/opp/of.c:516 dev_pm_opp_of_find_icc_paths() warn: passing zero to 'dev_err_probe'
Make sure to use the right error and pass it along.
Fixes: fa155f4f8348 ("OPP: Use dev_err_probe() when failing to get icc_path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202306262008.guNLgjt6-lkp@intel.com/
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
|
|
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- miscellaneous NuBus fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.4-rc1
nubus: Don't list slot resources by default
nubus: Remove proc entries before adding them
nubus: Partially revert proc_create_single_data() conversion
|
|
* clk-qcom: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
clk: qcom: gcc-ipq6018: remove duplicate initializers
clk: qcom: gcc-ipq9574: Enable crypto clocks
dt-bindings: clock: Add crypto clock and reset definitions
clk: qcom: Add lpass audio clock controller driver for SC8280XP
clk: qcom: Add lpass clock controller driver for SC8280XP
dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
clk: qcom: gpucc-sm8550: Add support for graphics clock controller
clk: qcom: Add support for SM8450 GPUCC
clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
clk: qcom: rcg2: Make hw_clk_ctrl toggleable
dt-bindings: clock: qcom: Add SM8550 graphics clock controller
...
* clk-microchip:
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
|
|
Prepare input updates for 6.5 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add initial support for RAS hardware found on AMD server GPUs (MI200).
Those GPUs and CPUs are connected together through the coherent
fabric and the GPU memory controllers report errors through x86's MCA
so EDAC needs to support them. The amd64_edac driver supports now HBM
(High Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/amd64: Cache and use GPU node map
EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
EDAC/amd64: Document heterogeneous system enumeration
x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
x86/amd_nb: Re-sort and re-indent PCI defines
x86/amd_nb: Add MI200 PCI IDs
ras/debugfs: Fix error checking for debugfs_create_dir()
x86/MCE: Check a hw error's address to determine proper recovery action
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for Zen4 client hardware
- amd64_edac: Remove the version string as it is useless and actively
confusing when looking at backported versions of the driver
- Add a driver for the Nuvoton NPCM memory controller
- A debugfs error checking cleanup
* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/npcm: Add NPCM memory controller driver
dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
EDAC/thunderx: Check debugfs file creation retval properly
EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
EDAC/amd64: Remove module version string
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
