summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-12drivers/rtc/rtc-pl031.c: restore ST variant functionalityLinus Walleij
Commit e7e034e18a0a ("drivers/rtc/rtc-pl031.c: fix the missing operation on enable") accidentally broke the ST variants of PL031. The bit that is being poked as "clockwatch" enable bit for the ST variants does the work of bit 0 on this variant. Bit 0 is used for a clock divider on the ST variants, and setting it to 1 will affect timekeeping in a very bad way. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-12net: fec_mpc52xx: Read MAC address from device-treeStefan Roese
Until now, the MPC5200 FEC ethernet driver relied upon the bootloader (U-Boot) to write the MAC address into the ethernet controller registers. The Linux driver should not rely on such a thing. So lets read the MAC address from the DT as it should be done here. The following priority is now used to read the MAC address: 1) First, try OF node MAC address, if not present or invalid, then: 2) Read from MAC address registers, if invalid, then: 3) Log a warning message, and choose a random MAC address. This fixes a problem with a MPC5200 board that uses the SPL U-Boot version without FEC initialization before Linux booting for boot speedup. Additionally a status line is now be printed upon successful driver probing, also displaying this MAC address. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12cxgb4vf: Fix VLAN extraction counter incrementVipul Pandya
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: dual emac interface implementationMugunthan V N
The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: make cpts as pointerMugunthan V N
As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as pointer. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: davinci_cpdma: add support for directed packet and ↵Mugunthan V N
source port detection * Introduced parameter to add port number for directed packet in cpdma_chan_submit * Source port detection macro with DMA descriptor status Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is another handful of late-breaking fixes intended for the 3.8 stream... Hopefully the will still make it! :-) There are three mac80211 fixes pulled from Johannes: "Here are three fixes still for the 3.8 stream, the fix from Cong Ding for the bad sizeof (Stephen Hemminger had pointed it out before but I'd promptly forgotten), a mac80211 managed-mode channel context usage fix where a downgrade would never stop until reaching non-HT and a bug in the channel determination that could cause invalid channels like HT40+ on channel 11 to be used." Also included is a mwl8k fix that avoids an oops when using mwl8k devices that only support the 5 GHz band. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6Alexander Duyck
The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: qmi_wwan: add Yota / Megafon M100-1 4g modemBjørn Mork
Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12efi_pstore: Introducing workqueue updating sysfsSeiji Aguchi
[Problem] efi_pstore creates sysfs entries, which enable users to access to NVRAM, in a write callback. If a kernel panic happens in an interrupt context, it may fail because it could sleep due to dynamic memory allocations during creating sysfs entries. [Patch Description] This patch removes sysfs operations from a write callback by introducing a workqueue updating sysfs entries which is scheduled after the write callback is called. Also, the workqueue is kicked in a just oops case. A system will go down in other cases such as panic, clean shutdown and emergency restart. And we don't need to create sysfs entries because there is no chance for users to access to them. efi_pstore will be robust against a kernel panic in an interrupt context with this patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12efivars: Disable external interrupt while holding efivars->lockSeiji Aguchi
[Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-02-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Three nouveau fixes, all user visible issues, and one radeon regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: enforce use of radeon_get_ib_value when reading user cmd drm/nouveau: add lockdep annotations drm/nv50/fb: Fix nullptr-deref on IGPs drm/nouveau: use different register to wait for secret scrubber
2013-02-12rtlwifi: Initialize rate_init member of struct rate_control_opsCatalin Iacob
This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-12iwlwifi: mvm: beautify code in rx_handlersEmmanuel Grumbach
Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: update station when marked associatedJohannes Berg
In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't wait for session protection to startJohannes Berg
Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't delay the association until after beaconJohannes Berg
If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: apply beacon changes immediatelyJohannes Berg
If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: report wakeup reasonsJohannes Berg
Query the wakeup reasons properly and then report them to mac80211. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: query and report WoWLAN wakeup reasonJohannes Berg
Implement proper WoWLAN wakeup and query the wakeup reasons, then report them to userspace. Note that this is tricky: a firmware bug (that has been fixed in later versions) means that the status command response isn't properly closed in hardware and thus won't arrive at the host. Sending another command after it closes the status response but the next command gets stuck, etc. We reset the device after querying though, so this is not a big issue, just makes for strange code. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-02-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-12iwlwifi: mvm: use atomic interface iteration to avoid deadlockEmmanuel Grumbach
Using the non-atomic version creates a dependency between mac80211's iflist_mtx and mvm->mutex. Use the atomic version instead which doesn't take iflist_mtx but can't sleep, so send the HCMD in ASYNC. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12drm/radeon: enforce use of radeon_get_ib_value when reading user cmdJerome Glisse
When ever parsing cmd buffer supplied by userspace we need to use radeon_get_ib_value rather than directly accessing the ib as the user cmd might not yet be copied into the ib thus the parser might read value that does not correspond to what user is sending and possibly allowing user to send malicious command undected. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-11x86, uv, uv3: Check current gru hub support for SGI UV3Mike Travis
This patch checks current hub support to avoid panicing the system until all the GRU changes for UV3+ are in place. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194509.035828372@gulag1.americas.sgi.com Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lockNeil Horman
__netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Cong Wang <amwang@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ath6kl: provide 64-bit per-station byte countersVladimir Kondratiev
Internally, 64-bit byte counters maintained for per-station statistics. Tell to the netlink that full 64-bit value provided Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11wlcore: remove newly introduced alloc/OOM messagesLuciano Coelho
In commit 0d2e7a5c (wireless: Remove unnecessary alloc/OOM messages, alloc cleanups) OOM messages after alloc were removed from the wlcore modules. Commit afb43e6d (wlcore: remove if_ops from platform_data) reintroduced a couple of those. This patch removes them. Signed-off-by: Luciano Coelho <coelho@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11wireless: rt2x00: rt2800usb add "unknown" devicesXose Vazquez Perez
0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: add PCIe8897 supportAvinash Patil
This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: define generic data type for PCIe ring buffersAvinash Patil
This patch defines PCIe ring buffer array pointer as void instead of mwifiex_pcie_buf_desc. This will enable us to use same pointers for ring operations instead of new structures if buffer descriptor structure changes. Also split out event buffer descriptor structure from struct mwifiex_pcie_buf_desc. For PCIe8766 TX/RX buffer descriptor is same as evevt buffer descriptor. Newer chips could use different TX/RX buffer descriptor while event descriptor remains the same. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: separate ring initialization and ring creation routinesAvinash Patil
This patch separates PCIe ring initialization from ring creation routines. This modularizes ring creation(TXBD, RXBD and event rings) functions. Readability has been improved while moving the code around. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: store card specific data in PCI device table entryAvinash Patil
This patch adds support for storing PCIe device specific data into driver_data structure of pci_device_id. When a device with known device_id is probed, we use this driver_data to populate card specific structres in driver. This enables to remove device specific defines for scratch registers, firmware name, FW download block size, etc. from source code. This will make addition of support for new chipsets a lot easier. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11ath9k: Fix IBSS joiner modeSujith Manoharan
On joining an existing IBSS network, beaconing has to start only after a TSF sync has happened by receiving a beacon from the BSS. In creator mode, beaconing can start immediately after a HW reset has been done. Now that mac80211 notifies the driver of the mode type (creator/joiner) via ieee80211_bss_conf->ibss_creator, make use of it to properly setup the HW beacon timers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11ath9k: Fix ATH9K_HW_CAP_HT usageSujith Manoharan
There are a few places where the station's HT capabilities should be checked instead of ATH9K_HW_CAP_HT, which is a global feature for the driver. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11cpufreq / intel_pstate: Fix 32 bit buildDirk Brandewie
Fixes 32 bit build. on i386: drivers/built-in.o: In function `intel_pstate_timer_func': intel_pstate.c:(.text+0x4ce97e): undefined reference to `__udivdi3' drivers/built-in.o: In function `intel_pstate_cpu_init': intel_pstate.c:(.cpuinit.text+0x974): undefined reference to `__udivdi3' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-11mwl8k: fix band for supported channelsJonas Gorski
The band field for the supported channels were left unpopulated, making them default to 0 == IEEE80211_BAND_2GHZ, even for the 5GHz channels. This resulted in null pointer accesses if anything tries to access wiphy->bands[channel->band] of a 5GHz channel on 5GHz only cards, since wiphy->bands[2GHZ] is NULL for them (e.g. cfg80211_chandef_usable does). Example kernel OOPS: [ 665.669993] Unable to handle kernel NULL pointer dereference at virtual address 00000016 [ 665.678194] pgd = c6d58000 [ 665.680941] [00000016] *pgd=06f8a831, *pte=00000000, *ppte=00000000 [ 665.687303] Internal error: Oops: 17 [#1] (...) [ 666.116373] Backtrace: [ 666.118866] [<bf0368dc>] (cfg80211_chandef_usable+0x0/0x1bc [cfg80211]) from [<bf025e64>] (nl80211_leave_mesh+0x244/0x264 [cfg80211]) [ 666.130919] r7:c6d12100 r6:0000143c r5:c0611c48 r4:c0611b98 [ 666.136668] [<bf025d84>] (nl80211_leave_mesh+0x164/0x264 [cfg80211]) from [<bf02634c>] (nl80211_remain_on_channel+0x2a0/0x358 [cfg80211]) [ 666.149074] r7:c6d12000 r6:c6d12000 r5:c6f4f368 r4:00000003 [ 666.154814] [<bf0262ec>] (nl80211_remain_on_channel+0x240/0x358 [cfg80211]) from [<bf02ddb0>] (nl80211_set_wiphy+0x264/0x560 [cfg80211]) [ 666.167150] [<bf02db4c>] (nl80211_set_wiphy+0x0/0x560 [cfg80211]) from [<c01f94e0>] (genl_rcv_msg+0x1b8/0x1f8) [ 666.177205] [<c01f9328>] (genl_rcv_msg+0x0/0x1f8) from [<c01f89a0>] (netlink_rcv_skb+0x58/0xb4) [ 666.185949] [<c01f8948>] (netlink_rcv_skb+0x0/0xb4) from [<c01f931c>] (genl_rcv+0x20/0x2c) [ 666.194251] r6:c6f70780 r5:0000002c r4:c6f70780 r3:00000001 [ 666.199973] [<c01f92fc>] (genl_rcv+0x0/0x2c) from [<c01f8418>] (netlink_unicast+0x154/0x1f4) [ 666.208449] r4:c785ea00 r3:c01f92fc [ 666.212057] [<c01f82c4>] (netlink_unicast+0x0/0x1f4) from [<c01f8790>] (netlink_sendmsg+0x230/0x2b0) [ 666.221240] [<c01f8560>] (netlink_sendmsg+0x0/0x2b0) from [<c01cccf8>] (sock_sendmsg+0x90/0xa4) [ 666.229986] [<c01ccc68>] (sock_sendmsg+0x0/0xa4) from [<c01cdcb0>] (__sys_sendmsg+0x290/0x298) [ 666.238637] r9:00000000 r8:c0611ec8 r6:0000002c r5:c0610000 r4:c0611f64 [ 666.245411] [<c01cda20>] (__sys_sendmsg+0x0/0x298) from [<c01cf52c>] (sys_sendmsg+0x44/0x6c) [ 666.253897] [<c01cf4e8>] (sys_sendmsg+0x0/0x6c) from [<c00090a0>] (ret_fast_syscall+0x0/0x2c) [ 666.262460] r6:00000000 r5:beeff96c r4:00000005 Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLEJohannes Berg
There are only a few drivers that use HW scan, and all of those don't need a non-idle transition before starting the scan -- some don't even care about idle at all. Remove the flag and code associated with it. The only driver that really actually needed this is wl1251 and it can just do it itself in the hw_scan callback -- implement that. Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: move TSF into IEsJohannes Berg
While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: remove scan ies NULL checkJohannes Berg
There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11NFC: microread: Fix mei physical layerSamuel Ortiz
The MEI bus API changed according to the latest comments from the char-misc maintainers, and this patch fixes the microread mei physical layer code according to those changes: We pass the MEI id back to the probe routine, and the mei_driver takes a table of MEI ids instead of one static id. Also, mei_bus_driver got renamed to mei_driver, mei_bus_client to mei_device, and mei_bus_set/get_clientdata to mei_set/get_clientdata. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-11Merge branch 'pnp'Rafael J. Wysocki
* pnp: PNPACPI: Fix acpi_bus_get_device() check in drivers/pnp/pnpacpi/core.c drivers/pnp/pnpbios: remove depends on CONFIG_EXPERIMENTAL
2013-02-11Merge branch 'acpi-lpss'Rafael J. Wysocki
* acpi-lpss: ACPI / platform: create LPSS clocks if Lynxpoint devices are found during scan clk: x86: add support for Lynxpoint LPSS clocks x86: add support for Intel Low Power Subsystem ACPI / platform: fix comment about the platform device name ACPI: add support for CSRT table
2013-02-11Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: (35 commits) ACPI / PM: Handle missing _PSC in acpi_bus_update_power() ACPI / PM: Do not power manage devices in unknown initial states ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.c ACPI / PM: Fix /proc/acpi/wakeup for devices w/o bus or parent ACPI / PM: Fix consistency check for power resources during resume ACPI / PM: Expose lists of device power resources to user space sysfs: Functions for adding/removing symlinks to/from attribute groups ACPI / PM: Expose current status of ACPI power resources ACPI / PM: Expose power states of ACPI devices to user space ACPI / scan: Prevent device add uevents from racing with user space ACPI / PM: Fix device power state value after transitions to D3cold ACPI / PM: Use string "D3cold" to represent ACPI_STATE_D3_COLD ACPI / PM: Sanitize checks in acpi_power_on_resources() ACPI / PM: Always evaluate _PSn after setting power resources ACPI / PM: Introduce helper for executing _PSn methods ACPI / PM: Make acpi_bus_init_power() more robust ACPI / PM: Fix build for unusual combination of Kconfig options ACPI / PM: remove leading whitespace from #ifdef ACPI / PM: Consolidate suspend-specific and hibernate-specific code ACPI / PM: Move device power management functions to device_pm.c ...
2013-02-11Merge branch 'acpica'Rafael J. Wysocki
* acpica: (56 commits) ACPICA: Update version to 20130117 ACPICA: Update predefined info table for _MLS method ACPICA: Remove some extraneous newlines in ACPI_ERROR type calls ACPICA: iASL/Disassembler: Add option to ignore NOOP opcodes/operators ACPICA: AcpiGetSleepTypeData: Allow \_Sx to return either 1 or 2 integers ACPICA: Update ACPICA copyrights to 2013 ACPICA: Update predefined info table ACPICA: Cleanup table handler naming conflicts. ACPICA: Source restructuring: split large files into 8 new files. ACPICA: Cleanup PM_TIMER_FREQUENCY definition. ACPICA: Cleanup ACPI_DEBUG_PRINT macros to fix potential build breakages. ACPICA: Update version to 20121220. ACPICA: Interpreter: Fix Store() when implicit conversion is not possible. ACPICA: Resources: Split interrupt share/wake bits into two fields. ACPICA: Resources: Support for ACPI 5 wake bit in ExtendedInterrupt descriptor. ACPICA: Interpreter: Add warning if 64-bit constant appears in 32-bit table. ACPICA: Update ACPICA initialization messages. ACPICA: Namespace: Eliminate dot...dot output during initialization. ACPICA: Resource manager: Add support for ACPI 5 wake bit in IRQ descriptor. ACPICA: Fix possible memory leak in dispatcher error path. ...
2013-02-11Merge branch 'acpi-scan'Rafael J. Wysocki
* acpi-scan: (30 commits) ACPI / scan: Fix acpi_bus_get_device() check in acpi_match_device() ACPI / scan: Make namespace scanning and trimming mutually exclusive ACPI / scan: Make it clear that acpi_bus_trim() cannot fail ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead ACPI: update ej_event interface to take acpi_device ACPI / scan: Add second pass to acpi_bus_trim() ACPI / scan: Change the implementation of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_device_unregister() ACPI: Remove the ops field from struct acpi_device ACPI: remove unused acpi_op_bind and acpi_op_unbind ACPI / scan: Fix check of device_attach() return value. ACPI / scan: Treat power resources in a special way ACPI: Remove unused struct acpi_pci_root.id member ACPI: Drop ACPI device .bind() and .unbind() callbacks ACPI / PCI: Move the _PRT setup and cleanup code to pci-acpi.c ACPI / PCI: Rework the setup and cleanup of device wakeup ACPI: Add .setup() and .cleanup() callbacks to struct acpi_bus_type ACPI: Make acpi_bus_scan() and acpi_bus_add() take only one argument ACPI: Replace ACPI device add_type field with a match_driver flag ...
2013-02-11regmap: debugfs: Factor out debugfs_tot_len calc into a functionDimitris Papastamos
In preparation to support the regmap debugfs ranges functionality factor this code out to a separate function. We'll need to ensure that the value has been correctly calculated from two separate places in the code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 02:21:48 +0000