summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-05drm/i915: clear the shadow batchMatthew Auld
The shadow batch is an internal object, which doesn't have any page clearing, and since the batch_len can be smaller than the object, we should take care to clear it. Testcase: igt/gen9_exec_parse/shadow-peek Fixes: 4f7af1948abc ("drm/i915: Support ro ppgtt mapped cmdparser shadow buffers") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201224151358.401345-1-matthew.auld@intel.com Cc: stable@vger.kernel.org (cherry picked from commit eeb52ee6c4a429ec301faf1dc48988744960786e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-04net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register accessMartin Blumenstingl
There is one GSWIP_MII_CFG register for each switch-port except the CPU port. The register offset for the first port is 0x0, 0x02 for the second, 0x04 for the third and so on. Update the driver to not only restrict the GSWIP_MII_CFG registers to ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This means we are not overwriting the configuration for the third port (port two since we start counting from zero) with the settings for the sixth port (with number five) anymore. The GSWIP_MII_PCDU(p) registers are not updated because there's really only three (one for each of the following ports: 0, 1, 5). Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYsMartin Blumenstingl
Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow. Without this the PHY link is detected properly and ethtool statistics for TX are increasing but there's no RX traffic coming in. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Suggested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04r8169: work around power-saving bug on some chip versionsHeiner Kallweit
A user reported failing network with RTL8168dp (a quite rare chip version). Realtek confirmed that few chip versions suffer from a PLL power-down hw bug. Fixes: 07df5bd874f0 ("r8169: power down chip in probe") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: usb: qmi_wwan: add Quectel EM160R-GLBjørn Mork
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flagCharles Keepax
A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of macb_set_tx_clk were gated on the presence of this flag. - if (!clk) + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) However the flag was not added to anything other than the new sama7g5_gem, turning that function call into a no op for all other systems. This breaks the networking on Zynq. The commit message adding this states: a new capability so that macb_set_tx_clock() to not be called for IPs having this capability This strongly implies that present of the flag was intended to skip the function not absence of the flag. Update the if statement to this effect, which repairs the existing users. Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04ibmvnic: fix: NULL pointer dereference.YANG LI
The error is due to dereference a null pointer in function reset_one_sub_crq_queue(): if (!scrq) { netdev_dbg(adapter->netdev, "Invalid scrq reset. irq (%d) or msgs(%p).\n", scrq->irq, scrq->msgs); return -EINVAL; } If the expression is true, scrq must be a null pointer and cannot dereference. Fixes: 9281cf2d5840 ("ibmvnic: avoid memset null scrq msgs") Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci <abaci@linux.alibaba.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04vhost_net: fix ubuf refcount incorrectly when sendmsg failsYunjian Wang
Currently the vhost_zerocopy_callback() maybe be called to decrease the refcount when sendmsg fails in tun. The error handling in vhost handle_tx_zerocopy() will try to decrease the same refcount again. This is wrong. To fix this issue, we only call vhost_net_ubuf_put() when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS. Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: Fix use of incorrect min_headroom sizeTaehee Yoo
In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: set NETIF_F_LLTX flagTaehee Yoo
Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04Merge branch '5.11/scsi-postmerge' into 5.11/scsi-fixesMartin K. Petersen
Merge two commits that had dependencies on other 5.11 trees (the block and the irq trees respectively). - We reverted a megaraid_sas change in 5.10 due to missing block layer plumbing. Now that this is in place, reinstate the change. - The hisi_sas driver had a dependency on a driver core irq change that went in through Thomas' tree. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-04i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede
gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04i2c: sprd: use a specific timeout to avoid system hang up issueChunyan Zhang
If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04Merge qcom driver fix into regulator-5.11Mark Brown
2021-01-04dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY valueAmelie Delaunay
STM32_MDMA_VERY_HIGH_PRIORITY is b11 not 0x11, so fix it with 0x3. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210104142045.25583-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04usb: gadget: configfs: Preserve function ordering after bind failureChandana Kishori Chiluveru
When binding the ConfigFS gadget to a UDC, the functions in each configuration are added in list order. However, if usb_add_function() fails, the failed function is put back on its configuration's func_list and purge_configs_funcs() is called to further clean up. purge_configs_funcs() iterates over the configurations and functions in forward order, calling unbind() on each of the previously added functions. But after doing so, each function gets moved to the tail of the configuration's func_list. This results in reshuffling the original order of the functions within a configuration such that the failed function now appears first even though it may have originally appeared in the middle or even end of the list. At this point if the ConfigFS gadget is attempted to re-bind to the UDC, the functions will be added in a different order than intended, with the only recourse being to remove and relink the functions all over again. An example of this as follows: ln -s functions/mass_storage.0 configs/c.1 ln -s functions/ncm.0 configs/c.1 ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd echo "<udc device>" > UDC # fails start adbd echo "<udc device>" > UDC # now succeeds, but... # bind order is # "ADB", mass_storage, ncm [30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30133.119974] using random self ethernet address [30133.120002] using random host ethernet address [30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26 [30133.140015] usb0: MAC 6e:28:7e:42:66:6a [30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19 [30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200 [30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00 [30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19 [30136.661933] init: starting service 'adbd'... [30136.700126] read descriptors [30136.700413] read strings [30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30138.575631] using random self ethernet address [30138.575660] using random host ethernet address [30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8 [30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0 [30138.791490] configfs-gadget gadget: super-speed config #1: c Fix this by reversing the iteration order of the functions in purge_config_funcs() when unbinding them, and adding them back to the config's func_list at the head instead of the tail. This ensures that we unbind and unwind back to the original list order. Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface") Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: select CONFIG_CRC32Arnd Bergmann
Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap': f_eem.c:(.text+0x11cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40): more undefined references to `crc32_le' follow Fixes: 6d3865f9d41f ("usb: gadget: NCM: Add transmit multi-frame.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: core: change the comment for usb_gadget_connectPeter Chen
The pullup does not need to be enabled at below situations: - For platforms which the hardware pullup starts after setting register even they do not see the VBUS. If the pullup is always enabled for these platforms, it will consume more power and break the USB IF compliance tests [1]. - For platforms which need to do BC 1.2 charger detection after seeing the VBUS. Pullup D+ will break the charger detection flow. - For platforms which the system suspend is allowed when the connection with host is there but the bus is not at suspend. For these platforms, it is better to disable pullup when entering the system suspend otherwise the host may confuse the device behavior after controller is in low power mode. Disable pullup is considered as a disconnection event from host side. [1] USB-IF Full and Low Speed Compliance Test Procedure F Back-voltage Testing Section 7.2.1 of the USB specification requires that no device shall supply (source) current on VBUS at its upstream facing port at any time. From VBUS on its upstream facing port, a device may only draw (sink) current. They may not provide power to the pull-up resistor on D+/D- unless VBUS is present (see Section 7.1.5). Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201230051114.21370-1-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: configfs: Fix use-after-free issue with udc_nameEddie Hung
There is a use-after-free issue, if access udc_name in function gadget_dev_desc_UDC_store after another context free udc_name in function unregister_gadget. Context 1: gadget_dev_desc_UDC_store()->unregister_gadget()-> free udc_name->set udc_name to NULL Context 2: gadget_dev_desc_UDC_show()-> access udc_name Call trace: dump_backtrace+0x0/0x340 show_stack+0x14/0x1c dump_stack+0xe4/0x134 print_address_description+0x78/0x478 __kasan_report+0x270/0x2ec kasan_report+0x10/0x18 __asan_report_load1_noabort+0x18/0x20 string+0xf4/0x138 vsnprintf+0x428/0x14d0 sprintf+0xe4/0x12c gadget_dev_desc_UDC_show+0x54/0x64 configfs_read_file+0x210/0x3a0 __vfs_read+0xf0/0x49c vfs_read+0x130/0x2b4 SyS_read+0x114/0x208 el0_svc_naked+0x34/0x38 Add mutex_lock to protect this kind of scenario. Signed-off-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: dwc3: gadget: Restart DWC3 gadget when enabling pullupWesley Cheng
usb_gadget_deactivate/usb_gadget_activate does not execute the UDC start operation, which may leave EP0 disabled and event IRQs disabled when re-activating the function. Move the enabling/disabling of USB EP0 and device event IRQs to be performed in the pullup routine. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Tested-by: Michael Tretter <m.tretter@pengutronix.de> Cc: stable <stable@vger.kernel.org> Reported-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1609282837-21666-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: usbip: vhci_hcd: protect shift sizeRandy Dunlap
Fix shift out-of-bounds in vhci_hcd.c: UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41 shift exponent 768 is too large for 32-bit type 'int' Fixes: 03cd00d538a6 ("usbip: vhci-hcd: Set the vhci structure up to work") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com Cc: Yuyang Du <yuyang.du@intel.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04USB: usblp: fix DMA to stackJohan Hovold
Stack-allocated buffers cannot be used for DMA (on all architectures). Replace the HP-channel macro with a helper function that allocates a dedicated transfer buffer so that it can continue to be used with arguments from the stack. Note that the buffer is cleared on allocation as usblp_ctrl_msg() returns success also on short transfers (the buffer is only used for debugging). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04USB: serial: iuu_phoenix: fix DMA from stackJohan Hovold
Stack-allocated buffers cannot be used for DMA (on all architectures) so allocate the flush command buffer using kmalloc(). Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Cc: stable <stable@vger.kernel.org> # 2.6.25 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04USB: serial: option: add LongSung M5710 module supportDaniel Palmer
Add a device-id entry for the LongSung M5710 module. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2df3 ProdID=9d03 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=<snip> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniel Palmer <daniel@0x0f.com> https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com [ johan: drop id defines, only bind to vendor class ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04regulator: qcom-rpmh: add QCOM_COMMAND_DB dependencyArnd Bergmann
A built-in regulator driver cannot link against a modular cmd_db driver: qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr' There is already a dependency for RPMh, so add another one of this type for cmd_db. Fixes: 34c5aa2666db ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error") Fixes: 46fc033eba42 ("regulator: add QCOM RPMh regulator driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov
According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04spi: fix the divide by 0 error when calculating xfer waiting timeXu Yilun
The xfer waiting time is the result of xfer->len / xfer->speed_hz. This patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is not assigned and stays 0. This avoids the divide by 0 issue and ensures a reasonable tolerant waiting time. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04dmaengine: xilinx_dma: fix mixed_enum_type coverity warningShravya Kumbham
Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()Shravya Kumbham
In xilinx_dma_child_probe function, the nr_channels variable is passed to of_property_read_u32() which expects an u32 return value pointer. Modify the nr_channels variable type from int to u32 to fix the incompatible parameter coverity warning. Addresses-Coverity: Event incompatible_param. Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: check dma_async_device_register return valueShravya Kumbham
dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: qcom: fix gpi undefined behaviorArnd Bergmann
gcc points out an incorrect error handling loop: drivers/dma/qcom/gpi.c: In function 'gpi_ch_init': drivers/dma/qcom/gpi.c:1254:15: error: iteration 2 invokes undefined behavior [-Werror=aggressive-loop-optimizations] 1254 | struct gpii *gpii = gchan->gpii; | ^~~~ drivers/dma/qcom/gpi.c:1951:2: note: within this loop 1951 | for (i = i - 1; i >= 0; i++) { | ^~~ Change the loop to correctly walk backwards through the initialized fields rather than off into the woods. Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135738.3741123-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04USB: serial: option: add Quectel EM160R-GLBjørn Mork
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: add model comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-03lightnvm: select CONFIG_CRC32Arnd Bergmann
Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03block: rsxx: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-02Merge tag 'pm-5.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a crash in intel_pstate during resume from suspend-to-RAM that may occur after recent changes and two resource leaks in error paths in the operating performance points (OPP) framework, add a new C-states table to intel_idle and update the cpuidle MAINTAINERS entry to cover the governors too. Specifics: - Fix recently introduced crash in the intel_pstate driver that occurs if scale-invariance is disabled during resume from suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR values made by the platform firmware (Rafael Wysocki). - Fix a memory leak and add a missing clk_put() in error paths in the OPP framework (Quanyang Wang, Viresh Kumar). - Add new C-states table for SnowRidge processors to the intel_idle driver (Artem Bityutskiy). - Update the MAINTAINERS entry for cpuidle to make it clear that the governors are covered by it too (Lukas Bulwahn)" * tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: add SnowRidge C-state table cpufreq: intel_pstate: Fix fast-switch fallback path opp: Call the missing clk_put() on error opp: fix memory leak in _allocate_opp_table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-02Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Fix fast-switch fallback path * pm-cpuidle: intel_idle: add SnowRidge C-state table MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
2021-01-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
2020-12-30intel_idle: add SnowRidge C-state tableArtem Bityutskiy
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30cpufreq: intel_pstate: Fix fast-switch fallback pathRafael J. Wysocki
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bugAlan Stern
The dummy-hcd driver was written under the assumption that all the parameters in URBs sent to its root hub would be valid. With URBs sent from userspace via usbfs, that assumption can be violated. In particular, the driver doesn't fully check the port-feature values stored in the wValue entry of Clear-Port-Feature and Set-Port-Feature requests. Values that are too large can cause the driver to perform an invalid left shift of more than 32 bits. Ironically, two of those left shifts are unnecessary, because they implement Set-Port-Feature requests that hubs are not required to support, according to section 11.24.2.13 of the USB-2.0 spec. This patch adds the appropriate checks for the port feature selector values and removes the unnecessary feature settings. It also rejects requests to set the TEST feature or to set or clear the INDICATOR and C_OVERCURRENT features, as none of these are relevant to dummy-hcd's root-hub emulation. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+5925509f78293baa7331@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201230162044.GA727759@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30hwmon: (pwm-fan) Ensure that calculation doesn't discard big period valuesUwe Kleine-König
With MAX_PWM being defined to 255 the code unsigned long period; ... period = ctx->pwm->args.period; state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); calculates a too small value for duty_cycle if the configured period is big (either by discarding the 64 bit value ctx->pwm->args.period or by overflowing the multiplication). As this results in a too slow fan and so maybe an overheating machine better be safe than sorry and error out in .probe. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-30spi: Fix the clamping of spi->max_speed_hzTudor Ambarus
If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz will be overwritten by zero. Make sure spi->controller->max_speed_hz is not zero when clamping spi->max_speed_hz. Put the spi->controller->max_speed_hz non-zero check higher in the if, so that we avoid a superfluous init to zero when both spi->max_speed_hz and spi->controller->max_speed_hz are zero. Fixes: 9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201216092321.413262-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-29habanalabs: Fix memleak in hl_device_resetDinghao Liu
When kzalloc() fails, we should execute hl_mmu_fini() to release the MMU module. It's the same when hl_ctx_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-29drm/msm: Ensure get_pages is called when lockedIskren Chernev
get_pages is only called in a locked context. Add a WARN_ON to make sure it stays that way. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-29drm/msm: Fix null dereference in _msm_gem_newIskren Chernev
The crash was caused by locking an uninitialized lock during init of drm_gem_object. The lock changed in the breaking commit, but the init was not moved accordingly. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: msm(+) qcom_spmi_vadc qcom_vadc_common dm_mod usb_f_rndis rmi_i2c rmi_core qnoc_msm8974 icc_smd_rpm pm8941_pwrkey CPU: 2 PID: 1020 Comm: udevd Not tainted 5.10.0-postmarketos-qcom-msm8974 #8 Hardware name: Generic DT based system PC is at ww_mutex_lock+0x20/0xb0 LR is at _msm_gem_new+0x13c/0x298 [msm] pc : [<c0be31e8>] lr : [<bf0b3404>] psr: 20000013 sp : c36e7ad0 ip : c3b3d800 fp : 00000000 r10: 00000001 r9 : c3b22800 r8 : 00000000 r7 : c3b23000 r6 : c3b3d600 r5 : c3b3d600 r4 : 00000000 r3 : c34b4780 r2 : c3b3d6f4 r1 : 00000000 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5787d Table: 03ae406a DAC: 00000051 Process udevd (pid: 1020, stack limit = 0x(ptrval)) Stack: (0xc36e7ad0 to 0xc36e8000) [...] [<c0be31e8>] (ww_mutex_lock) from [<bf0b3404>] (_msm_gem_new+0x13c/0x298 [msm]) [<bf0b3404>] (_msm_gem_new [msm]) from [<bf0b3aa8>] (_msm_gem_kernel_new+0x20/0x190 [msm]) [<bf0b3aa8>] (_msm_gem_kernel_new [msm]) from [<bf0b4a30>] (msm_gem_kernel_new+0x24/0x2c [msm]) [<bf0b4a30>] (msm_gem_kernel_new [msm]) from [<bf0b8e2c>] (msm_gpu_init+0x308/0x548 [msm]) [<bf0b8e2c>] (msm_gpu_init [msm]) from [<bf060a90>] (adreno_gpu_init+0x13c/0x240 [msm]) [<bf060a90>] (adreno_gpu_init [msm]) from [<bf062b1c>] (a3xx_gpu_init+0x78/0x1dc [msm]) [<bf062b1c>] (a3xx_gpu_init [msm]) from [<bf05f394>] (adreno_bind+0x1cc/0x274 [msm]) [<bf05f394>] (adreno_bind [msm]) from [<c087a254>] (component_bind_all+0x11c/0x278) [<c087a254>] (component_bind_all) from [<bf0b11d4>] (msm_drm_bind+0x18c/0x5b4 [msm]) [<bf0b11d4>] (msm_drm_bind [msm]) from [<c0879ea0>] (try_to_bring_up_master+0x200/0x2c8) [<c0879ea0>] (try_to_bring_up_master) from [<c087a648>] (component_master_add_with_match+0xc8/0xfc) [<c087a648>] (component_master_add_with_match) from [<bf0b0c3c>] (msm_pdev_probe+0x288/0x2c4 [msm]) [<bf0b0c3c>] (msm_pdev_probe [msm]) from [<c08844cc>] (platform_drv_probe+0x48/0x98) [<c08844cc>] (platform_drv_probe) from [<c0881cc4>] (really_probe+0x108/0x528) [<c0881cc4>] (really_probe) from [<c0882480>] (driver_probe_device+0x78/0x1d4) [<c0882480>] (driver_probe_device) from [<c08828dc>] (device_driver_attach+0xa8/0xb0) [<c08828dc>] (device_driver_attach) from [<c0882998>] (__driver_attach+0xb4/0x154) [<c0882998>] (__driver_attach) from [<c087fa1c>] (bus_for_each_dev+0x78/0xb8) [<c087fa1c>] (bus_for_each_dev) from [<c0880e98>] (bus_add_driver+0x10c/0x208) [<c0880e98>] (bus_add_driver) from [<c0883504>] (driver_register+0x88/0x118) [<c0883504>] (driver_register) from [<c0302098>] (do_one_initcall+0x50/0x2b0) [<c0302098>] (do_one_initcall) from [<c03bace4>] (do_init_module+0x60/0x288) [<c03bace4>] (do_init_module) from [<c03bdf1c>] (sys_finit_module+0xd4/0x120) [<c03bdf1c>] (sys_finit_module) from [<c0300060>] (ret_fast_syscall+0x0/0x54) Exception stack(0xc36e7fa8 to 0xc36e7ff0) 7fa0: 00020000 00000000 00000007 b6edd5b0 00000000 b6f2ff20 7fc0: 00020000 00000000 0000017b 0000017b b6eef980 bedc3a54 00473c99 00000000 7fe0: b6edd5b0 bedc3918 b6ed8a5f b6f6a8b0 Code: e3c3303f e593300c e1a04000 f590f000 (e1940f9f) ---[ end trace 277e2a3da40bbb76 ]--- Fixes: 6c0e3ea250476 ("drm/msm/gem: Switch over to obj->resv for locking") Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-29spi: altera: fix return value for altera_spi_txrx()Xu Yilun
This patch fixes the return value for altera_spi_txrx. It should return 1 for interrupt transfer mode, and return 0 for polling transfer mode. The altera_spi_txrx() implements the spi_controller.transfer_one callback. According to the spi-summary.rst, the transfer_one should return 0 when transfer is finished, return 1 when transfer is still in progress. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/1609219662-27057-2-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-29regmap: debugfs: Fix a memory leak when calling regmap_attach_devXiaolei Wang
After initializing the regmap through syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the device, because the debugfs_name has been allocated, there is no need to redistribute it again unreferenced object 0xd8399b80 (size 64): comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s) hex dump (first 32 bytes): 64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72 dummy-iomuxc-gpr 40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69 @20e4000..R[.~Bi backtrace: [<ca384d6f>] kasprintf+0x2c/0x54 [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc [<bc4181da>] __regmap_init+0xc38/0xd88 [<1f7e0609>] of_syscon_register+0x168/0x294 [<735e8766>] device_node_get_regmap+0x6c/0x98 [<d96c8982>] imx6ul_init_machine+0x20/0x88 [<0456565b>] customize_machine+0x1c/0x30 [<d07393d8>] do_one_initcall+0x80/0x3ac [<7e584867>] kernel_init_freeable+0x170/0x1f0 [<80074741>] kernel_init+0x8/0x120 [<285d6f28>] ret_from_fork+0x14/0x20 [<00000000>] 0x0 Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-29qcom: bam_dma: Delete useless kfree codeZheng Yongjun
The parameter of kfree function is NULL, so kfree code is useless, delete it. Therefore, goto expression is no longer needed, so simplify it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201216130649.13979-1-zhengyongjun3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-29dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()Dan Carpenter
If the dw_edma_alloc_burst() function fails then we free "chunk" but it's still on the "desc->chunk->list" list so it will lead to a use after free. Also the "->chunks_alloc" count is incremented when it shouldn't be. In current kernels small allocations are guaranteed to succeed and dw_edma_alloc_burst() can't fail so this will not actually affect runtime. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/X9dTBFrUPEvvW7qc@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-29dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of ↵Christophe JAILLET
the probe function 'disable_xdmac()' should be called in the error handling path of the probe function to undo a previous 'enable_xdmac()' call, as already done in the remove function. Fixes: a6e9be055d47 ("dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201219132800.183254-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:24:48 +0000