| Age | Commit message (Collapse) | Author |
|---|
|
Fix error case management in airoha_dev_xmit routine since we need to
DMA unmap pending buffers starting from q->head.
Moreover fix a typo in error case branch in airoha_set_gdm_ports
routine.
Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b628871bc8ae4861b5e2ab4db90aaf373cbb7cee.1721203880.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In gve_clean_xdp_done, the driver processes the TX completions based on
a 32-bit NIC counter and a 32-bit completion counter stored in the tx
queue.
Fix the for loop so that the counter wraparound is handled correctly.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240716171041.1561142-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor drivers: gc05a2, gc08a3 and imx283
- New serializer/deserializer drivers: max96714 and max96717
- New JPEG encoder driver: e5010
- Support for Raspberry Pi PiSP Backend (BE) ISP driver
- Old documentation for av7110 driver removed, as a new version was
added as Documentation/userspace-api/media/dvb/legacy*.rst
- atompisp: Linux firmwares are now available, so drop firmware-related
task from TODO and update firmware logic
- The imx258 driver has gained several improvements
- wave5 driver has gained support for HEVC decoding
- em28xx gained support for MyGica UTV3
- av7110 budget-patch driver removed
- Lots of other cleanups, improvements and fixes
* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
media: raspberrypi: Switch to remove_new
media: uapi: pisp_be_config: Add extra config fields
media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
media: uapi: pisp_common: Capitalize all macros
media: uapi: pisp_common: Add 32 bpp format test
media: uapi: pisp_be_config: Drop BIT() from uAPI
media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
media: atomisp: Fix spelling mistakes in sh_css_sp.c
media: atomisp: Fix spelling mistake in ia_css_debug.c
media: atomisp: Fix spelling mistake in hmm_bo.c
media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
media: atomisp: Fix spelling mistake in sh_css_internal.h
media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
media: atomisp: Remove unused GPIO related defines and APIs
media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
media: atomisp: Clean up unused macros from math_support.h
media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
media: atomisp: Update TODO
media: atomisp: Prefix firmware paths with "intel/ipu/"
media: atomisp: Remove firmware_name module parameter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hardware timestamp update from Dipen Patel:
- Add module description in hte test to silence modpost warnings
* tag 'for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: add missing MODULE_DESCRIPTION() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- New trigger for Input Events
- New led_mc_set_brightness() call to adapt colour/brightness for
mutli-colour LEDs
- New lled_mc_trigger_event() call to call the above based on given
trigger conditions
- New led_get_color_name() call, a wrapper around the existing
led_colors[] array
- A new flag to avoid automatic renaming of LED devices
New Drivers:
- Silergy SY7802 Flash LED Controller
- Texas Instruments LP5569 LED Controller
- ChromeOS EC LED Controller
New Device Support:
- KTD202{6,7} support for Kinetic KTD2026/7 LEDs
Fix-ups:
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity and
avoid duplication
- Use generic platform device properties instead of OF/ACPI specific
ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
Bug Fixes:
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error
handling routines
- Repair locking issue causing circular dependency splats and
lock-ups
- Unregister sysfs entries before deactivating triggers to prevent
use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW
triggers"
* tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits)
leds: leds-lp5569: Enable chip after chip configuration
leds: leds-lp5569: Better handle enabling clock internal setting
leds: leds-lp5569: Fix typo in driver name
leds: flash: leds-qcom-flash: Test the correct variable in init
leds: leds-lp55xx: Convert mutex lock/unlock to guard API
leds: leds-lp5523: Convert to sysfs_emit API
leds: leds-lp5569: Convert to sysfs_emit API
Revert "leds: led-core: Fix refcount leak in of_led_get()"
leds: leds-lp5569: Add support for Texas Instruments LP5569
leds: leds-lp55xx: Drop deprecated defines
leds: leds-lp55xx: Support ENGINE program up to 128 bytes
leds: leds-lp55xx: Generalize sysfs master_fader
leds: leds-lp55xx: Generalize sysfs engine_leds
leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
leds: leds-lp55xx: Generalize stop_engine function
leds: leds-lp55xx: Generalize turn_off_channels function
leds: leds-lp55xx: Generalize set_led_current function
leds: leds-lp55xx: Generalize multicolor_brightness function
leds: leds-lp55xx: Generalize led_brightness function
leds: leds-lp55xx: Generalize firmware_loaded function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Texas Instruments LM3509 Backlight Driver
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Drop i2c_device_id::driver_data where the value is unused
- Make use of the new *_scoped() guard APIs
- Decouple from fbdev by providing Backlight with its own
BACKLIGHT_POWER_* constrains
Bug Fixes:
- Correctly assess return values (NULL vs IS_ERR())
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings"
* tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (23 commits)
backlight: sky81452-backlight: Use backlight power constants
backlight: rave-sp-backlight: Use backlight power constants
backlight: pwm-backlight: Use backlight power constants
backlight: pcf50633-backlight: Use backlight power constants
backlight: pandora-backlight: Use backlight power constants
backlight: mp3309c: Use backlight power constants
backlight: lm3533-backlight: Use backlight power constants
backlight: led-backlight: Use backlight power constants
backlight: ktd253-backlight: Use backlight power constants
backlight: kb3886-bl: Use backlight power constants
backlight: journada_bl: Use backlight power constants
backlight: ipaq-micro-backlight: Use backlight power constants
backlight: gpio-backlight: Use backlight power constants
backlight: corgi-lcd: Use backlight power constants
backlight: ams369fb06: Use backlight power constants
backlight: aat2870-backlight: Use blacklight power constants
backlight: Add BACKLIGHT_POWER_ constants for power states
backlight: lm3509_bl: Fix early returns in for_each_child_of_node()
backlight: Drop explicit initialization of struct i2c_device_id::driver_data to 0
backlight: Add missing MODULE_DESCRIPTION() macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- rewrite of the HID-BPF internal implementation to use bpf struct_ops
instead of a tracing endpoint (Benjamin Tissoires)
- add two new HID-BPF hooks to be able to intercept userspace calls
targeting a HID device and filtering them (Benjamin Tissoires)
- add support for various new devices through HID-BPF filters (Benjamin
Tissoires)
- add support for the magic keyboard backlight (Orlando Chamberlain)
- add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff
Johnson)
- use of kvzalloc in case memory gets too fragmented (Hailong Liu)
- retrieve the device firmware node in the child HID device (Danny
Kaehn)
- some hid-uclogic improvements (José Expósito)
- some more typos, trivial fixes, kernel doctext and unused functions
cleanups
* tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits)
HID: hid-steam: Fix typo in goto label
HID: mcp2221: Remove unnecessary semicolon
HID: Fix spelling mistakes "Kensigton" -> "Kensington"
HID: add more missing MODULE_DESCRIPTION() macros
HID: samples: fix the 2 struct_ops definitions
HID: fix for amples in for-6.11/bpf
HID: apple: Add support for magic keyboard backlight on T2 Macs
HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix
HID: bpf: Add Huion Dial 2 bpf fixup
HID: bpf: Add support for the XP-PEN Deco Mini 4
HID: bpf: move the BIT() macro to hid_bpf_helpers.h
HID: bpf: add a driver for the Huion Inspiroy 2S (H641P)
HID: bpf: Add a HID report composition helper macros
HID: bpf: doc fixes for hid_hw_request() hooks
HID: bpf: doc fixes for hid_hw_request() hooks
HID: bpf: fix gcc warning and unify __u64 into u64
selftests/hid: ensure CKI can compile our new tests on old kernels
selftests/hid: add an infinite loop test for hid_bpf_try_input_report
selftests/hid: add another test for injecting an event from an event hook
HID: bpf: allow hid_device_event hooks to inject input reports on self
...
|
|
Pull IPMI updates from Corey Minyard:
"Some cleanups for device changes coming, and some range checks on data
coming from a host to a BMC"
* tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Drop explicit initialization of struct i2c_device_id::driver_data to 0
ipmi: ssif_bmc: prevent integer overflow on 32bit systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.11-2024-07-12:
amdgpu:
- RAS fixes
- SMU fixes
- GC 12 updates
- SR-IOV fixes
- IH 7 updates
- DCC fixes
- GC 11.5 fixes
- DP MST fixes
- GFX 9.4.4 fixes
- SMU 14 updates
- Documentation updates
- MAINTAINERS updates
- PSR SU fix
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712171637.2581787-1-alexander.deucher@amd.com
|
|
After calling uefi interface allocate_pool to apply for memory, we
should clear 0 to prevent the possibility of using random values.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Cc: <stable@vger.kernel.org> # v6.6+
Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv)
Store the sense data for ATA PASS-THROUGH commands at the correct
offset in the sense buffer when using fixed format sense data.
Cleanup the logic related to generating sense data for PASS-THROUGH
commands. Generating sense data for PASS-THROUGH commands would
overwrite any eventual (real) sense data received from the device.
Honor the D_SENSE bit when generating sense data for PASS-THROUGH
commands. (The D_SENSE bit can be set by the user, and determines if
the returned sense data should be in fixed format or descriptor
format)
- ata port allocation cleanups (me)
Assign the ata port print_id at port allocation time, such that the
ata_port_* print functions can be used earlier in the init call
chain.
Change the ata port port print_id to use ida_alloc(), such that
print_ids will get reused on rmmod + modprobe, instead of being
incremented indefinitely.
Remove wrappers that only existed in order to export the internal
libata functions which they wrapped, and instead export the libata
functions directly.
- Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm
(Mario Limonciello)
Using this default was not always a good idea before, because it
would break hot plug support. However, with LPM changes in recent
kernels, a port marked as external will not enable LPM (in order to
not break hot plug), so it is now safe to change the default value of
this Kconfig.
All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
med_power_with_dipm for quite a long time
- Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li)
* tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci
ata: ahci: Add debug print for external port
ata,scsi: Remove wrapper ata_sas_port_alloc()
ata: libata-core: Reuse available ata_port print_ids
ata: libata: Assign print_id at port allocation time
ata: libata-core: Remove local_port_no struct member
ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc()
ata: libata-core: Remove support for decreasing the number of ports
ata: libata: Remove unused function declaration for ata_scsi_detect()
ata,scsi: Remove wrappers ata_sas_tport_{add,delete}()
ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf
ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()
ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()
ata: libata-scsi: Remove redundant sense_buffer memsets
ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error
ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1
ata: libata-scsi: Fix offsets for the fixed format sense data
dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format
ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- New flag DLM_LSFL_SOFTIRQ_SAFE can be set by code using dlm to
indicate callbacks can be run from softirq
- Change md-cluster to set DLM_LSFL_SOFTIRQ_SAFE
- Clean up for previous changes, e.g. unused code and parameters
- Remove custom pre-allocation of rsb structs which is unnecessary with
kmem caches
- Change idr to xarray for lkb structs in use
- Change idr to xarray for rsb structs being recovered
- Change outdated naming related to internal rsb states
- Fix some incorrect add/remove of rsb on scan list
- Use rcu to free rsb structs
* tag 'dlm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add rcu_barrier before destroy kmem cache
dlm: remove DLM_LSFL_SOFTIRQ from exflags
fs: dlm: remove unused struct 'dlm_processed_nodes'
md-cluster: use DLM_LSFL_SOFTIRQ for dlm_new_lockspace()
dlm: implement LSFL_SOFTIRQ_SAFE
dlm: introduce DLM_LSFL_SOFTIRQ_SAFE
dlm: use LSFL_FS to check for kernel lockspace
dlm: use rcu to avoid an extra rsb struct lookup
dlm: fix add_scan and del_scan usage
dlm: change list and timer names
dlm: move recover idr to xarray datastructure
dlm: move lkb idr to xarray datastructure
dlm: drop own rsb pre allocation mechanism
dlm: remove ls_local_handle from struct dlm_ls
dlm: remove unused parameter in dlm_midcomms_addr
dlm: don't kref_init rsbs created for toss list
dlm: remove scand leftovers
|
|
When requesting an attestation report a guest is able to specify whether
it wants SNP firmware to sign the report using either a Versioned Chip
Endorsement Key (VCEK), which is derived from chip-unique secrets, or a
Versioned Loaded Endorsement Key (VLEK) which is obtained from an AMD
Key Derivation Service (KDS) and derived from seeds allocated to
enrolled cloud service providers (CSPs).
For VLEK keys, an SNP_VLEK_LOAD SNP firmware command is used to load
them into the system after obtaining them from the KDS. Add a
corresponding userspace interface so to allow the loading of VLEK keys
into the system.
See SEV-SNP Firmware ABI 1.54, SNP_VLEK_LOAD for more details.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501085210.2213060-21-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We may end up calling pwrseq_target_free() on a partially initialized
target object whose unit is either NULL or an ERR_PTR(). Avoid
dereferencing invalid memory by adding an appropriate check to
pwrseq_target_free().
Fixes: 249ebf3f65f8 ("power: sequencing: implement the pwrseq core")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-pm/62a3531e-9927-40f8-b587-254a2dfa47ef@stanley.mountain/
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240712194004.241939-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Building the fbnic nn s390, yield a build bug:
In function ‘fbnic_config_drop_mode_rcq’,
inlined from ‘fbnic_enable’ at drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:1836:4:
././include/linux/compiler_types.h:510:45: error: call to ‘__compiletime_assert_919’ declared with attribute error: FIELD_PREP: value too large for the field
The relevant mask is 9 bits wide, and the related value is the cacheline
aligned size of struct skb_shared_info.
On s390 the cacheline size is 256 bytes, and skb_shared_info minimum
size on 64 bits system is 320 bytes.
Avoid building the driver for such arch.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202407170432.dYJQOWVz-lkp@intel.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/5dfefd3e90e77828f38e68854b171a5b8b8c6ede.1721215379.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-17-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-15-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs_ctx(), allocate one of virtual_queue_info structs
and pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-14-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-13-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-12-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-11-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since the original find_vqs() is no longer present, rename
find_vqs_info() back to find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-10-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert existing find_vqs() transport implementations
to use find_vqs_info() config op.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-7-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert existing vp_find_vqs() and vp_modern_find_vqs() implementations
to find_vqs_info() config op.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-6-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since caif uses only one queue, convert to virtio_find_single_vq()
helper which is made for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-2-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The dma_request_chan() returns error pointer in case of error, while
dma_request_channel() returns NULL in case of error therefore different
error checks are needed for the two.
Fixes: 7326d3fb1ee3 ("mtd: rawnand: lpx32xx: Request DMA channels using DT entries")
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240705115139.126522-1-piotr.wojtaszczyk@timesys.com
|
|
MX35{U,L}F{2,4}G24AD-Z4I8 are Macronix serial NAND flashes.
Their main difference from MX35{U,L}F{2,4}G24AD lies in
the plane number. The plane number for those with the
postfix Z4I8 is 1.
These flashes have been validated on Xilinx zynq-picozed
board which include Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240704024839.241101-3-linchengming884@gmail.com
|
|
Adding the Device ID 2 on Macronix serial NAND flash.
When the number of flashes increases, we need to utilize
Device ID 2 to distinguish between different flashes.
These flashes have been validated on Xilinx zynq-picozed
board which included Macronix SPI Host.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240704024839.241101-2-linchengming884@gmail.com
|
|
Move away from pl08x platform data towards device tree.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240627150046.258795-11-piotr.wojtaszczyk@timesys.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240604212919.5038-6-wsa+renesas@sang-engineering.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240604212919.5038-5-wsa+renesas@sang-engineering.com
|
|
Add "fsl,imx8qxp-gpmi-nand" compatible string. iMX8QXP gpmi nand is similar
to iMX7D. But it is using 4 clocks: "gpmi_io", "gpmi_apb", "gpmi_bch" and
"gpmi_bch_apb".
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240520-gpmi_nand-v2-4-e3017e4c9da5@nxp.com
|
|
Introduce a boolean flag, 'support_edo_timing', within gpmi_devdata to
simplify the logic check in gpmi_setup_interface(). This is made in
preparation for adding support for imx8qxp gpmi.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240520-gpmi_nand-v2-3-e3017e4c9da5@nxp.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- add vm_mmap() allocation resource manager
- convert usercopy kselftest to KUnit
- disable usercopy testing on !CONFIG_MMU
- add MODULE_DESCRIPTION() to core, list, and usercopy tests
- add tests for assertion formatting functions - assert.c
- introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
- fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
assertion
- rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
kunit: executor: Simplify string allocation handling
kunit/usercopy: Add missing MODULE_DESCRIPTION()
kunit/usercopy: Disable testing on !CONFIG_MMU
usercopy: Convert test_user_copy to KUnit test
kunit: test: Add vm_mmap() allocation resource manager
list: test: add the missing MODULE_DESCRIPTION() macro
kunit: add missing MODULE_DESCRIPTION() macros to core modules
list: test: remove unused struct 'klist_test_struct'
kunit: Cover 'assert.c' with tests
|
|
The Qualcomm firmware code shouldn't ask about what memory allocator
mode should be used when the code isn't even enabled.
Get rid of pointless config-time question.
Link: https://lore.kernel.org/all/CAHk-=wg+38EHPKGou1MqXwAAXC30cM8sMgZAGnZ7TcFO4L9J2w@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The only kind of new feature added by these is the hwmon interface
support in the ACPI fan driver. Apart from that, they mostly address
issues and clean up code.
Specifics:
- Switch the ACPI x86 utility code and the ACPI LPSS driver to new
Intel CPU model defines (Tony Luck)
- Add hwmon interface support to the ACPI fan driver (Armin Wolf)
- Add sysfs entry for guaranteed performance to the ACPI CPPC library
and replace a ternary operator with umax() in it (Petr Tesařík,
Prabhakar Pujeri)
- Clean up the ACPI PMIC driver in multiple ways (Andy Shevchenko,
Christophe JAILLET)
- Add support for charge limiting state to the ACPI battery driver
and update _OSC to indicate support for it (Armin Wolf)
- Clean up the sysfs interface in the ACPI battery, SBS (smart
battery subsystem) and AC drivers (Thomas Weißschuh)
- Coordinate header includes in the ACPI NUMA code and make it use
ACCESS_COORDINATE_CPU when appropriate (Huang Ying, Thorsten Blum)
- Downgrade Intel _OSC and _PDC messages in the ACPI processor driver
to debug to reduce log noise (Mario Limonciello)
- Still evaluate _OST when _PUR evaluation fails in the ACPI PAD
(processor aggregator) driver as per the spec (Armin Wolf)
- Skip ACPI IRQ override on Asus Vivobook Pro N6506MJ and N6506MU
platforms (Tamim Khan)
- Force native mode on some T2 macbooks in the ACPI backlight driver
and replace strcpy() with strscpy() in it (Orlando Chamberlain,
Muhammad Qasim Abdul Majeed)
- Add missing MODULE_DESCRIPTION() macros in two places (Jeff
Johnson)"
* tag 'acpi-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (26 commits)
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MJ
ACPI: video: force native for some T2 macbooks
ACPI: video: Use strscpy() instead of strcpy()
ACPI: CPPC: Replace ternary operator with umax()
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MU
ACPI: PMIC: Constify struct pmic_table
ACPI: bus: Indicate support for battery charge limiting thru _OSC
ACPI: battery: Add support for charge limiting state
ACPI: processor: Downgrade Intel _OSC and _PDC messages to debug
ACPI: SBS: manage alarm sysfs attribute through psy core
ACPI: battery: create alarm sysfs attribute atomically
ACPI: battery: use sysfs_emit over sprintf
ACPI: battery: constify powersupply properties
ACPI: SBS: constify powersupply properties
ACPI: AC: constify powersupply properties
ACPI: PMIC: Replace open coded be16_to_cpu()
ACPI: PMIC: Convert pr_*() to dev_*() printing macros
ACPI: PMIC: Use sizeof() instead of hard coded value
ACPI: NUMA: Consolidate header includes
ACPI: CPPC: add sysfs entry for guaranteed performance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.
Specifics:
- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)
- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)
- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)
- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)
- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)
- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark
Rutland)
- gcc-plugins: Remove duplicate included header file stringpool.h
(Thorsten Blum)
- ARM: Remove address checking for MMUless devices (Yanjun Yang)
- randomize_kstack: Clean up per-arch entropy and codegen
- KCFI: Make FineIBT mode Kconfig selectable
- fortify: Do not special-case 0-sized destinations
* tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve stack alignment codegen
ARM: Remove address checking for MMUless devices
gcc-plugins: Remove duplicate included header file stringpool.h
randomize_kstack: Remove non-functional per-arch entropy filtering
fortify: Do not special-case 0-sized destinations
x86/alternatives: Make FineIBT mode Kconfig selectable
lkdtm/bugs: add test for hung smp_call_function_single()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some trivial cleanups
- a fix for the Xen timer
- add boot time selectable debug capability to the Xen multicall
handling
- two fixes for the recently added Xen irqfd handling
* tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove deprecated xen_nopvspin boot parameter
x86/xen: eliminate some private header files
x86/xen: make some functions static
xen: make multicall debug boot time selectable
xen/arm: Convert comma to semicolon
xen: privcmd: Fix possible access to a freed kirqfd instance
xen: privcmd: Switch from mutex to spinlock for irqfds
xen: add missing MODULE_DESCRIPTION() macros
x86/xen: Convert comma to semicolon
x86/xen/time: Reduce Xen timer tick
xen/manage: Constify struct shutdown_handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
