| Age | Commit message (Collapse) | Author |
|---|
|
Commit 09b3efec ("bcache: Don't reinvent the wheel but use existing llist
API") replaces the following while loop by llist_for_each_entry(),
-
- while (reverse) {
- cl = container_of(reverse, struct closure, list);
- reverse = llist_next(reverse);
-
+ llist_for_each_entry(cl, reverse, list) {
closure_set_waiting(cl, 0);
closure_sub(cl, CLOSURE_WAITING + 1);
}
This modification introduces a potential race by iterating a corrupted
list. Here is how it happens.
In the above modification, closure_sub() may wake up a process which is
waiting on reverse list. If this process decides to wait again by calling
closure_wait(), its cl->list will be added to another wait list. Then
when llist_for_each_entry() continues to iterate next node, it will travel
on another new wait list which is added in closure_wait(), not the
original reverse list in __closure_wake_up(). It is more probably to
happen on UP machine because the waked up process may preempt the process
which wakes up it.
Use llist_for_each_entry_safe() will fix the issue, the safe version fetch
next node before waking up a process. Then the copy of next node will make
sure list iteration stays on original reverse list.
Fixes: 09b3efec81de ("bcache: Don't reinvent the wheel but use existing llist API")
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
into drm-fixes
A few fixes for 4.14. Nothing too major.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
|
|
into drm-fixes
Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
It contains the following fixes:
- correct checking of return value
- send correct parameter to function (According to the parameter type)
- avoid spamming of dmesg log
- fix queue wrapping calculations
* tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/amdkfd: check for null dev to avoid a null pointer dereference
|
|
When calculating the size needed by struct atmel_pmecc_user *user,
the dmu and delta buffer sizes were forgotten.
This lead to a memory corruption (especially with a large ecc_strength).
Link: http://lkml.kernel.org/r/1506503157.3016.5.camel@gmail.com
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: stable@vger.kernel.org
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Pointed-at-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.
This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.
Fixes: c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext. If there are no subcontexts
the pointer will be invalid.
Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
commit 9a9b8112699d will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes: 9a9b8112699d ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.
Fixes: bc5214ee2922 (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
pr_err() messages should end with a new-line to avoid other messages
being concatenated. So replace '/n' with '\n'.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Fixes: 45a01c42933b ('iommu/amd: Add function copy_dev_tables()')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The ARM short descriptor has already limited the physical address
to 32bit after the commit <76557391433c> ("iommu/io-pgtable: Sanitise
map/unmap addresses"). But in MediaTek 4GB mode, the physical address
is from 0x1_0000_0000 to 0x1_ffff_ffff. this will cause:
WARNING: CPU: 4 PID: 3900 at
xxx/drivers/iommu/io-pgtable-arm-v7s.c:482 arm_v7s_map+0x40/0xf8
Modules linked in:
CPU: 4 PID: 3900 Comm: weston Tainted: G S W 4.9.44 #1
Hardware name: MediaTek MT2712m1v1 board (DT)
task: ffffffc0eaa5b280 task.stack: ffffffc0e9858000
PC is at arm_v7s_map+0x40/0xf8
LR is at mtk_iommu_map+0x64/0x90
pc : [<ffffff80085b09e8>] lr : [<ffffff80085b29fc>] pstate: 000001c5
sp : ffffffc0e985b920
x29: ffffffc0e985b920 x28: 0000000127d00000
x27: 0000000000100000 x26: ffffff8008f9e000
x25: 0000000000000003 x24: 0000000000100000
x23: 0000000127d00000 x22: 00000000ff800000
x21: ffffffc0f7ec8ce0 x20: 0000000000000003
x19: 0000000000000003 x18: 0000000000000002
x17: 0000007f7e5d72c0 x16: ffffff80082b0f08
x15: 0000000000000001 x14: 000000000000003f
x13: 0000000000000000 x12: 0000000000000028
x11: 0088000000000000 x10: 0000000000000000
x9 : ffffff80092fa000 x8 : ffffffc0e9858000
x7 : ffffff80085b29d8 x6 : 0000000000000000
x5 : ffffff80085b09a8 x4 : 0000000000000003
x3 : 0000000000100000 x2 : 0000000127d00000
x1 : 00000000ff800000 x0 : 0000000000000001
...
Call trace:
[<ffffff80085b09e8>] arm_v7s_map+0x40/0xf8
[<ffffff80085b29fc>] mtk_iommu_map+0x64/0x90
[<ffffff80085ab5f8>] iommu_map+0x100/0x3a0
[<ffffff80085ab99c>] default_iommu_map_sg+0x104/0x168
[<ffffff80085aead8>] iommu_dma_alloc+0x238/0x3f8
[<ffffff8008098b30>] __iommu_alloc_attrs+0xa8/0x260
[<ffffff80085f364c>] mtk_drm_gem_create+0xac/0x180
[<ffffff80085f3894>] mtk_drm_gem_dumb_create+0x54/0xc8
[<ffffff80085d576c>] drm_mode_create_dumb_ioctl+0xa4/0xd8
[<ffffff80085cb2a0>] drm_ioctl+0x1c0/0x490
In order to satify this, Limit the physical address to 32bit.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix the commit 81b3c2521844 ("iommu/io-pgtable: Introduce explicit
coherency"). If there is no IO_PGTABLE_QUIRK_NO_DMA, we should call
dma_sync_single_for_device for cache synchronization.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Fixes: 81b3c2521844 ('iommu/io-pgtable: Introduce explicit coherency')
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over
suspend/resume") caused the following compilation errors:
drivers/pinctrl/pinctrl-amd.c: In function ‘amd_gpio_should_save’:
drivers/pinctrl/pinctrl-amd.c:741:8: error: ‘const struct pin_desc’ has no member named ‘mux_owner’
if (pd->mux_owner || pd->gpio_owner ||
^
drivers/pinctrl/pinctrl-amd.c:741:25: error: ‘const struct pin_desc’ has no member named ‘gpio_owner’
if (pd->mux_owner || pd->gpio_owner ||
We need to enable CONFIG_PINMUX for this driver as well.
Cc: stable@vger.kernel.org
Fixes: 79d2c8bede2c93f943 ("pinctrl/amd: save pin registers over suspend/resume")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Commit 1eeef2d7483a ("mtd: handle partitioning on devices with 0
erasesize") introduced a regression on heterogeneous erase region
devices. Alignment of the partition was tested against the master
eraseblock size which can be bigger than the slave one, thus leading
to some partitions being marked as read-only.
Update wr_alignment to match this slave erasesize after this erasesize
has been determined by picking the biggest erasesize of all the regions
embedded in the MTD partition.
Reported-by: Mathias Thore <Mathias.Thore@infinera.com>
Fixes: 1eeef2d7483a ("mtd: handle partitioning on devices with 0 erasesize")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Mathias Thore <Mathias.Thore@infinera.com>
Reviewed-by: Mathias Thore <Mathias.Thore@infinera.com>
|
|
My Fujitsu-Siemens Lifebook S6120 doesn't have the FUJ02E3 device,
but it does have FUJ02B1. That means we do register the backlight
device (and it even seems to work), but the code will oops as soon
as we try to set the backlight brightness because it's trying to
call call_fext_func() with a NULL device. Let's just skip those
function calls when the FUJ02E3 device is not present.
Cc: Jonathan Woithe <jwoithe@just42.net>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # 4.13.x
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.14
Quite a lot of fixes this time. Most notable is the brcmfmac fix for a
CVE issue.
iwlwifi
* a couple of bugzilla bugs related to multicast handling
* two fixes for WoWLAN bugs that were causing queue hangs and
re-initialization problems
* two fixes for potential uninitialized variable use reported by Dan
Carpenter in relation to a recently introduced patch
* a fix for buffer reordering in the newly supported 9000 device
family
* fix a race when starting aggregation
* small fix for a recent patch to wake mac80211 queues
* send non-bufferable management frames in the generic queue so they
are not sent on queues that are under power-save
ath10k
* fix a PCI PM related gcc warning
brcmfmac
* CVE-2017-0786: add length check scan results from firmware
* respect passive scan requests from user space
qtnfmac
* fix race in tx path when using multiple interfaces
* cancel ongoing scan when removing the wireless interface
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-pci: Fix voltage switch for some Intel host controllers
- tmio: remove broken and noisy debug macro
* tag 'mmc-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Fix voltage switch for some Intel host controllers
mmc: tmio: remove broken and noisy debug macro
|
|
Call skb_frag_dma_map multiple times if tx length is greater than
device max and avoid processing tx ring until entire packet has been
sent.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to a bug in aquantia atlantic card firmware, it sometimes reports
invalid link speed bits. That caused driver to report link down events,
although link itself is totally fine.
This patch ignores such out of blue readings.
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver did a poor job in managing its Tx queues: Sometimes it could stop
tx queues due to link down condition in aq_nic_xmit - but never waked up
them. That led to Tx path total suspend.
This patch fixes this and improves generic queue management:
- introduces queue restart counter
- uses generic netif_ interface to disable and enable tx path
- refactors link up/down condition and introduces dmesg log event when
link changes.
- introduces new constant for minimum descriptors count required for queue
wakeup
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although hardware is capable for almost 16K MTU, without max_mtu field
correctly set it only allows standard MTU to be used.
This patch enables max MTU, calculating it from hardware maximum frame size
of 16352 octets (including FCS).
Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The hardware state readout oopses after several warnings when trying to
use HDMI on port A, if such a combination is configured in VBT. Filter
the combo out already at the VBT parsing phase.
v2: also ignore DVI (Ville)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Daniel Drake <dan@reactivated.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921141920.18172-1-jani.nikula@intel.com
(cherry picked from commit d27ffc1d00327c29b3aa97f941b42f0949f9e99f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
hw_check is being assigned and updated but is no longer being read,
hence it is redundant and can be removed.
Detected by clang scan-build:
"warning: Value stored to 'hw_check' during its initialization
is never read"
Fixes: f6d1973db2d2 ("drm/i915: Move modeset state verifier calls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914162154.11304-1-colin.king@canonical.com
(cherry picked from commit 4babc5e27cfda59e2e257d28628b8d853aea5206)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
drm_edid_to_eld() initializes the connector ELD to zero, overwriting the
ELD connector type initialized in intel_audio_codec_enable(). If
userspace does getconnector and thus get_modes after modeset, a
subsequent audio component i915_audio_component_get_eld() call will
receive an ELD without the connector type properly set. It's fine for
HDMI, but screws up audio for DP.
Always set the ELD connector type at intel_connector_update_modes()
based on the connector type. We can drop the connector type update from
intel_audio_codec_enable().
Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joseph Nuzman <jnuzman@gmail.com>
Reported-by: Joseph Nuzman <jnuzman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Joseph Nuzman <jnuzman@gmail.com>
Cc: stable@vger.kernel.org # v4.10+, maybe earlier
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919153813.29808-1-jani.nikula@intel.com
(cherry picked from commit d81fb7fd9436e81fda67e5bc8ed0713aa28d3db2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On rk3399-gru-kevin there are some cases where we're seeing AUX CH
failures when trying to do DisplayPort over type C. Problems are
intermittent and don't reproduce all the time. Problems are often
bursty and failures persist for several seconds before going away.
The failure case I focused on is:
* A particular type C to HDMI adapter.
* One orientation (flip mode) of that adapter.
* Easier to see failures when something is plugged into the _other
type C port at the same time.
* Problems reproduce on both type C ports (left and right side).
Ironically problems also stop reproducing when I solder wires onto the
AUX CH signals on a port (even if no scope is connected to the
signals). In this case, problems only stop reproducing on the port
with the wires connected.
From the above it appears that something about the signaling on the
aux channel is marginal and any slight differences can bring us over
the edge to failure.
It turns out that we can fix our problems by just increasing the
voltage swing of the AUX CH, giving us a bunch of extra margin. In DP
up to version 1.2 the voltage swing on the aux channel was specced as
.29 V to 1.38 V. In DP version 1.3 the aux channel voltage was
tightened to be between .29 V and .40 V, but it clarifies that it
really only needs the lower voltage when operating at the highest
speed (HBR3 mode). So right now we are trying to use a voltage that
technically should be valid for all versions of the spec (including
version 1.3 when transmitting at HBR3). That would be great to do if
it worked reliably. ...but it doesn't seem to.
It turns out that if you continue to read through the DP part of the
rk3399 TRM and other parts of the type C PHY spec you'll find out that
while the rk3399 does support DP 1.3, it doesn't support HBR3. The
docs specifically say "RBR, HBR and HBR2 data rates only". Thus there
is actually no requirement to support an AUX CH swing of .4 V.
Even if there is no actual requirement to support the tighter voltage
swing, one could possibly argue that we should support it anyway. The
DP spec clarifies that the lower voltage on the AUX CH will reduce
cross talk in some cases and that seems like it could be beneficial
even at the lower bit rates. At the moment, though, we are seeing
problems with the AUX CH and not on the other lines. Also, checking
another known working and similar laptop shows that the other laptop
runs the AUX channel at a higher voltage.
Other notes:
* Looking at measurements done on the AUX CH we weren't actually
compliant with the DP 1.3 spec anyway. AUX CH peek-to-peek voltage
was measured on rk3399-gru-kevin as .466 V which is > .4 V.
* With this new patch the AUX channel isn't actually 1.0 V, but it has
been confirmed that the signal is better and has more margin. Eye
diagram passes.
* If someone were truly an expert in the Type C PHY and in DisplayPort
signaling they might be able to make things work and keep the
voltage at < .4 V. The Type C PHY seems to have a plethora of
tuning knobs that could almost certainly improve the signal
integrity. Some of these things (like enabling tx_fcm_full_margin)
even seem to fix my problems. However, lacking expertise I can't
say whether this is a better or worse solution. Tightening signals
to give cleaner waveforms can often have adverse affects, like
increasing EMI or adding noise to other signals. I'd rather not
tune things like this without a healthy application of expertise
that I don't have.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
On some DP monitors we found that setting the wrong flip state on the
AUX channel could cause the monitor to stop asserting HotPlug Detect
(HPD). Setting the right flip state caused these monitors to start
asserting HotPlug Detect again.
Here's what we believe was happening:
* We'd plug in the monitor and we'd see HPD assert
* We'd quickly see HPD deassert
* The kernel would try to init the type C PHY but would init it in USB
mode (because there was a peripheral there but no HPD)
* Because the kernel never set the flip mode properly we'd never see
the HPD come back.
With this change, we'll still see HPD disappear (we don't think
there's anything we can do about that), but then it will come back.
Overall we can say that it's sane to set the AUX channel flip state
even when HPD is not asserted.
NOTE: to make this change possible, I needed to do a bit of cleanup to
the tcphy_dp_aux_calibration() function so that it doesn't ever
clobber the FLIP state. This made it very obvious that a line of code
documented as "setting bit 12" also did a bunch of other magic,
undocumented stuff. For now I'll just break out the bits and add a
comment that this is black magic and we'll try to document
tcphy_dp_aux_calibration() better in a future CL.
ALSO NOTE: the old function used to write a bunch of hardcoded
values in _some_ cases instead of doing a read-modify-write. One
could possibly assert that these could have had (beneficial) side
effects and thus with this new code (which always does
read-modify-write) we could have a bug. We shouldn't need to worry,
though, since in the old code tcphy_dp_aux_calibration() was always
called following the de-assertion of "reset" the the type C PHY.
...so the type C PHY was always in default state. TX_ANA_CTRL_REG_1
is documented to be 0x0 after reset. This was also confirmed by
printk.
Suggested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
devm_ioremap_resource() never returns NULL, it only returns error
pointers so this test needs to be changed.
Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The pipe selector is used to select some modes (such as USB or PCIe).
Otherwise it must be set to 0 (or "unconnected"). This patch does this
to ensure it is not set to an incompatible value when using the
supported modes (SGMII, 10GKR).
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The mux value is retrieved from the mvebu_comphy_get_mux() function
which returns an int. In mvebu_comphy_power_on() this int is stored to a
u32 and a check is made to ensure it's not negative. Which is wrong.
This fixes it.
Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Chip bank of version-1 is initialized as NULL, but it's used
by pcie_phy_instance_power_on/off(), so assign it a right
address.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
kasprintf() can fail and it's return value must be checked.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The TRACE_INCLUDE_FILE macro needs to specify the path relative to the
define_trace.h header rather than relative to the file defining it.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170823171326.23620-1-thierry.reding@gmail.com
|
|
Inlining these functions creates lots of stack variables that each take
64 bytes when KASAN is enabled, leading to this warning about potential
stack overflow:
drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_cmd_flow_tbl_add':
drivers/net/ethernet/rocker/rocker_ofdpa.c:621:1: error: the frame size of 2752 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
gcc-8 can now consolidate the stack slots itself, but on older versions
we get the same behavior by using a temporary variable that holds a
copy of the inline function argument.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During failover there is a small race window between fc_remote_port_add()
and fc_timeout_deleted_rport(); the latter drops the lock after setting the
port to NOTPRESENT, so if fc_remote_port_add() is called right at that time
it will fail to detect the existing rport and happily adding a new
structure, causing rports to get registered twice.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver_override implementation is susceptible to a race condition when
different threads are reading vs. storing a different driver override. Add
locking to avoid the race condition.
This is in close analogy to commit 6265539776a0 ("driver core: platform:
fix race condition with driver_override") from Adrian Salido.
Fixes: 782a985d7af2 ("PCI: Introduce new device binding path using pci_dev.driver_override")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.16+
|
|
When mapping the RX DMA buffers, the driver was accidentally specifying
zero for the buffer length. Under normal circumstances, SWIOTLB does not
need to allocate a bounce buffer, so the address is just mapped without
checking the size field. This is why the error was not detected earlier.
Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device
with same name "cpufreq-dt" using platform_device_register_*() routines.
This is leading to build warnings appended below.
Providing hardware information to OPP framework along with the platform-
device creation should be done by ti-cpufreq driver before cpufreq-dt
driver comes into place.
This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2
property) to the blacklist of devices in cpufreq-dt-platform driver to
avoid creating platform-device twice and remove build warnings.
[ 2.370167] ------------[ cut here ]------------
[ 2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78
[ 2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
[ 2.391219] Modules linked in:
[ 2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1
[ 2.402006] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[ 2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[ 2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[ 2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[ 2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78)
[ 2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98)
[ 2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4)
[ 2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[ 2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[ 2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[ 2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[ 2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[ 2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[ 2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[ 2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[ 2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[ 2.545981] ---[ end trace 2fc00e213c13ab20 ]---
[ 2.551051] ------------[ cut here ]------------
[ 2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4
[ 2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register
things with the same name in the same directory.
[ 2.577977] Modules linked in:
[ 2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170912 #1
[ 2.590013] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14)
[ 2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0)
[ 2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104)
[ 2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44)
[ 2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4)
[ 2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c)
[ 2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c)
[ 2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220)
[ 2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118)
[ 2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c)
[ 2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[ 2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4)
[ 2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110)
[ 2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c)
[ 2.716217] ---[ end trace 2fc00e213c13ab21 ]---
Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2)
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When an rport is found in the bindings array there is no guarantee that
it had been a target port, so we need to call fc_remote_port_rolechg()
here to ensure the scsi_target_id is set correctly. Otherwise the port
will never be scanned.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull block fixes from Jens Axboe:
- Two sets of NVMe pull requests from Christoph:
- Fixes for the Fibre Channel host/target to fix spec compliance
- Allow a zero keep alive timeout
- Make the debug printk for broken SGLs work better
- Fix queue zeroing during initialization
- Set of RDMA and FC fixes
- Target div-by-zero fix
- bsg double-free fix.
- ndb unknown ioctl fix from Josef.
- Buffered vs O_DIRECT page cache inconsistency fix. Has been floating
around for a long time, well reviewed. From Lukas.
- brd overflow fix from Mikulas.
- Fix for a loop regression in this merge window, where using a union
for two members of the loop_cmd turned out to be a really bad idea.
From Omar.
- Fix for an iostat regression fix in this series, using the wrong API
to get at the block queue. From Shaohua.
- Fix for a potential blktrace delection deadlock. From Waiman.
* 'for-linus' of git://git.kernel.dk/linux-block: (30 commits)
nvme-fcloop: fix port deletes and callbacks
nvmet-fc: sync header templates with comments
nvmet-fc: ensure target queue id within range.
nvmet-fc: on port remove call put outside lock
nvme-rdma: don't fully stop the controller in error recovery
nvme-rdma: give up reconnect if state change fails
nvme-core: Use nvme_wq to queue async events and fw activation
nvme: fix sqhd reference when admin queue connect fails
block: fix a crash caused by wrong API
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
nvmet: implement valid sqhd values in completions
nvme-fabrics: Allow 0 as KATO value
nvme: allow timed-out ios to retry
nvme: stop aer posting if controller state not live
nvme-pci: Print invalid SGL only once
nvme-pci: initialize queue memory before interrupts
nvmet-fc: fix failing max io queue connections
nvme-fc: use transport-specific sgl format
nvme: add transport SGL definitions
nvme.h: remove FC transport-specific error values
...
|
|
The notifier callbacks may want to call some OPP helper routines which
may try to take the same opp_table->lock again and cause a deadlock. One
such usecase was reported by Chanwoo Choi, where calling
dev_pm_opp_disable() leads us to the devfreq's OPP notifier handler,
which further calls dev_pm_opp_find_freq_floor() and it deadlocks.
We don't really need the opp_table->lock to be held across the notifier
call though, all we want to make sure is that the 'opp' doesn't get
freed while being used from within the notifier chain. We can do it with
help of dev_pm_opp_get/put() as well. Let's do it.
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Fixes: 5b650b388844 "PM / OPP: Take kref from _find_opp_table()"
Reported-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
nlmsg properly
ChunYu found a kernel crash by syzkaller:
[ 651.617875] kasan: CONFIG_KASAN_INLINE enabled
[ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 651.618731] general protection fault: 0000 [#1] SMP KASAN
[ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32
[ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000
[ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590
[...]
[ 651.627260] Call Trace:
[ 651.629156] skb_release_all+0x4f/0x60
[ 651.629450] consume_skb+0x1a5/0x600
[ 651.630705] netlink_unicast+0x505/0x720
[ 651.632345] netlink_sendmsg+0xab2/0xe70
[ 651.633704] sock_sendmsg+0xcf/0x110
[ 651.633942] ___sys_sendmsg+0x833/0x980
[ 651.637117] __sys_sendmsg+0xf3/0x240
[ 651.638820] SyS_sendmsg+0x32/0x50
[ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2
It's caused by skb_shared_info at the end of sk_buff was overwritten by
ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx.
During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh),
ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a
new value to skb_shinfo(SKB)->nr_frags by ev->type.
This patch is to fix it by checking nlh->nlmsg_len properly there to
avoid over accessing sk_buff.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading
GIC_SH_MASK*") adjusted the way we handle masking interrupts to set &
clear the interrupt's bit in each pcpu_mask. This allows us to avoid
needing to read the GIC mask registers and perform a bitwise and of
their values with the pending & pcpu_masks.
Unfortunately this didn't quite work for IPIs, which were mapped to a
particular CPU/VP during initialisation but never set the affinity or
effective_affinity fields of their struct irq_desc. This led to them
losing their affinity when gic_unmask_irq() was called for them, and
they'd all become affine to cpu0.
Fix this by:
1) Setting the effective affinity of interrupts in
gic_shared_irq_domain_map(), which is where we actually map an
interrupt to a CPU/VP. This ensures that the effective affinity mask
is always valid, not just after explicitly setting affinity.
2) Using an interrupt's effective affinity when unmasking it, which
prevents gic_unmask_irq() from unintentionally changing which
pcpu_mask includes an interrupt.
Fixes: 7778c4b27cbe ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20170922062440.23701-3-paul.burton@imgtec.com
|
|
The MIPS GIC driver is incorrectly using __fls to shift registers,
intending to shift to the least significant bit of a value based upon
its mask but instead shifting off all but the value's top bit. It should
actually be using __ffs to shift to the first, not last, bit of the
value.
Apparently the system I used when testing commit 3680746abd87
("irqchip: mips-gic: Convert remaining shared reg access to new
accessors") and commit b2b2e584ceab ("irqchip: mips-gic: Clean up mti,
reserved-cpu-vectors handling") managed to work correctly despite this
issue, but not all systems do...
Fixes: 3680746abd87 ("irqchip: mips-gic: Convert remaining shared reg access to new accessors")
Fixes: b2b2e584ceab ("irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handling")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20170922062440.23701-2-paul.burton@imgtec.com
|
|
Now that there are potentially long delays between when a remoteport or
targetport delete calls is made and when the callback occurs (dev_loss_tmo
timeout), no longer block in the delete routines and move the final nport
puts to the callbacks.
Moved the fcloop_nport_get/put/free routines to avoid forward declarations.
Ensure port_info structs used in registrations are nulled in case fields
are not set (ex: devloss_tmo values).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When searching for queue id's ensure they are within the expected range.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid calling the put routine, as it may traverse to free routines while
holding the target lock.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By calling nvme_stop_ctrl on a already failed controller will wait for the
scan work to complete (only by identify timeout expiration which is 60
seconds). This is unnecessary when we already know that the controller has
failed.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
