summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-09-23dm vdo: handle unaligned discards correctlyMatthew Sakai
Reset the data_vio properly for each discard block, and delay acknowledgement and cleanup until all discard blocks are complete. Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2024-09-23net: cirrus: use u8 for addr to calm down sparseNikita Shubin
ep93xx_eth.c:805:40: sparse: sparse: incorrect type in argument 2 (different address spaces) ep93xx_eth.c:805:40: sparse: expected unsigned char const [usertype] *addr ep93xx_eth.c:805:40: sparse: got void [noderef] __iomem * Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409212354.9CiUem7B-lkp@intel.com/ Fixes: 858555bb5598 ("net: cirrus: add DT support for Cirrus EP93xx") Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-22cxl: Calculate region bandwidth of targets with shared upstream linkDave Jiang
The current bandwidth calculation aggregates all the targets. This simple method does not take into account where multiple targets sharing under a switch or a root port where the aggregated bandwidth can be greater than the upstream link of the switch. To accurately account for the shared upstream uplink cases, a new update function is introduced by walking from the leaves to the root of the hierarchy and clamp the bandwidth in the process as needed. This process is done when all the targets for a region are present but before the final values are send to the HMAT handling code cached access_coordinate targets. The original perf calculation path was kept to calculate the latency performance data that does not require the shared link consideration. The shared upstream link calculation is done as a second pass when all the endpoints have arrived. Testing is done via qemu with CXL hierarchy. run_qemu[1] is modified to support several CXL hierarchy layouts. The following layouts are tested: HB: Host Bridge RP: Root Port SW: Switch EP: End Point 2 HB 2 RP 2 EP: resulting bandwidth: 624 1 HB 2 RP 2 EP: resulting bandwidth: 624 2 HB 2 RP 2 SW 4 EP: resulting bandwidth: 624 Current testing, perf number from SRAT/HMAT is hacked into the kernel code. However with new QEMU support of Generic Target Port that's incoming, the perf data injection is no longer needed. [1]: https://github.com/pmem/run_qemu Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://lore.kernel.org/linux-cxl/20240501152503.00002e60@Huawei.com/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20240904001316.1688225-3-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-09-22cxl: Preserve the CDAT access_coordinate for an endpointDave Jiang
Keep the access_coordinate from the CDAT tables for region perf calculations. The region perf calculation requires all participating endpoints to have arrived in order to determine if there are limitations of bandwidth data due to shared uplink. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20240904001316.1688225-2-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-09-22mailbox: Use of_property_match_string() instead of open-codingRob Herring (Arm)
Use of_property_match_string() instead of open-coding the search. With this, of_get_property() can be removed as there is no need to check for "mbox-names" presence first. This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22mailbox: bcm2835: Fix timeout during suspend modeStefan Wahren
During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: https://github.com/raspberrypi/firmware/issues/1894 Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22mailbox: sprd: Use devm_clk_get_enabled() helpersHuan Yang
The devm_clk_get_enabled() helpers: - call devm_clk_get() - call clk_prepare_enable() and register what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the calls to clk_disable_unprepare(). Due to clk only used in probe, not in suspend\resume, this pointer can remove from sprd_mbox_priv to save a little memory. Signed-off-by: Huan Yang <link@vivo.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22mailbox: rockchip: fix a typo in module autoloadingLiao Chen
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module properly autoloaded based on the alias from of_device_id table. It should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match', just fix it. Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver") Signed-off-by: Liao Chen <liaochen4@huawei.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22mailbox: imx: use device name in interrupt namePeng Fan
There are several MUs for different usage, SCMI MU, ELE MU, RemotePROC MU. Using "imx_mu_chan" in interrupt name would be hard to identify which MU triggers interrupt, so use device name to make it easy to know which MU triggers which interrupt. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22mailbox: ARM_MHU_V3 should depend on ARM64Geert Uytterhoeven
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a dependency on ARM64, to prevent asking the user about this driver when configuring a kernel for a different architecture than ARM64. Fixes: ca1a8680b134b5e6 ("mailbox: arm_mhuv3: Add driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2024-09-22dma-mapping: fix vmap and mmap of noncontiougs allocationsChristoph Hellwig
Commit b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") switched to use direct calls to dma-iommu, but missed the dma_vmap_noncontiguous, dma_vunmap_noncontiguous and dma_mmap_noncontiguous behavior keyed off the presence of the alloc_noncontiguous method. Fix this by removing the now unused alloc_noncontiguous and free_noncontiguous methods and moving the vmapping and mmaping of the noncontiguous allocations into the iommu code, as it is the only provider of actually noncontiguous allocations. Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") Reported-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leon@kernel.org> Tested-by: Xi Ruoyao <xry111@xry111.site>
2024-09-22RDMA/bnxt_re: Remove the unused variable en_devJiapeng Chong
Variable en_dev is not effectively used, so delete it. drivers/infiniband/hw/bnxt_re/main.c:1980:22: warning: variable ‘en_dev’ set but not used. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10867 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://patch.msgid.link/20240918021632.36091-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-09-22Input: hynitron_cstxxx - drop explicit initialization of struct ↵Uwe Kleine-König
i2c_device_id::driver_data to 0 These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-22rtc: rc5t619: use proper module tablesAndreas Kemnade
Avoid requiring MODULE_ALIASES by declaring proper device id tables. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20240918212159.1191637-1-andreas@kemnade.info Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-09-22rtc: m48t59: set rangeAlexandre Belloni
The m48t59 leap year calculation will fail in 2100 Link: https://lore.kernel.org/r/20240911224836.1571831-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-09-21clk: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all clk drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-09-21Merge branches 'clk-devm', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into ↵Stephen Boyd
clk-next * clk-devm: clk: provide devm_clk_get_optional_enabled_with_rate() clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data() * clk-samsung: clk: samsung: add top clock support for ExynosAuto v920 SoC clk: samsung: clk-pll: Add support for pll_531x dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS clk: samsung: clk-pll: Add support for pll_1418x clk: samsung: exynosautov9: add dpum clock support dt-bindings: clock: exynosautov9: add dpum clock clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix dt-bindings: clock: exynos7885: Add indices for USB clocks dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices dt-bindings: clock: exynos7885: Fix duplicated binding clk: samsung: exynos850: Add TMU clock dt-bindings: clock: exynos850: Add TMU clock * clk-rockchip: dt-bindings: clock, reset: fix top-comment indentation rk3576 headers clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions clk: rockchip: fix error for unknown clocks clk: rockchip: rk3588: drop unused code clk: rockchip: Add clock controller for the RK3576 clk: rockchip: Add new pll type pll_rk3588_ddr dt-bindings: clock, reset: Add support for rk3576 dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p dt-bindings: clock: rockchip: remove CLK_NR_CLKS and CLKPMU_NR_CLKS clk: rockchip: rk3399: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage clk: rockchip: rk3368: Drop CLK_NR_CLKS usage clk: rockchip: rk3328: Drop CLK_NR_CLKS usage clk: rockchip: rk3308: Drop CLK_NR_CLKS usage clk: rockchip: rk3288: Drop CLK_NR_CLKS usage clk: rockchip: rk3228: Drop CLK_NR_CLKS usage clk: rockchip: rk3036: Drop CLK_NR_CLKS usage clk: rockchip: px30: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228 * clk-qcom: (47 commits) clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details dt-bindings: interconnect: Add Qualcomm IPQ5332 support clk: qcom: gcc-msm8998: Add Q6 BIMC and LPASS core, ADSP SMMU clocks dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions clk: qcom: Fix SM_CAMCC_8150 dependencies clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src clk: qcom: gcc-sc8180x: Fix the sdcc2 and sdcc4 clocks freq table clk: qcom: gcc-sc8180x: Add GPLL9 support dt-bindings: clock: qcom: Add GPLL9 support on gcc-sc8180x clk: qcom: gcc-sc8180x: Register QUPv3 RCGs for DFS on sc8180x clk: qcom: clk-rpmh: Fix overflow in BCM vote dt-bindings: clock: qcom: Drop required-opps in required on SM8650 camcc dt-bindings: clock: qcom: Drop required-opps in required on sm8650 videocc dt-bindings: clock: qcom,qcs404-turingcc: convert to dtschema dt-bindings: clock: Add x1e80100 LPASSCC reset controller ...
2024-09-21Merge branches 'clk-amlogic', 'clk-microchip' and 'clk-imx' into clk-nextStephen Boyd
* clk-amlogic: clk: meson: introduce symbol namespace for amlogic clocks clk: meson: axg-audio: add sm1 earcrx clocks clk: meson: axg-audio: setup regmap max_register based on the SoC dt-bindings: clock: axg-audio: add earcrx clock ids clk: meson: s4: pll: Constify struct regmap_config clk: meson: s4: peripherals: Constify struct regmap_config clk: meson: c3: pll: Constify struct regmap_config clk: meson: c3: peripherals: Constify struct regmap_config clk: meson: a1: pll: Constify struct regmap_config clk: meson: a1: peripherals: Constify struct regmap_config * clk-microchip: clk: at91: sama7g5: Allocate only the needed amount of memory for PLLs clk: at91: sam9x7: add sam9x7 pmc driver dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT clk: at91: sama7g5: move mux table macros to header file clk: at91: sam9x7: add support for HW PLL freq dividers clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 * clk-imx: (27 commits) clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL clk: imx95: enable the clock of NETCMIX block control dt-bindings: clock: add RMII clock selection dt-bindings: clock: add i.MX95 NETCMIX block control clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data clk: imx: composite-7ulp: Use NULL instead of 0 clk: imx: add missing MODULE_DESCRIPTION() macros clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate clk: imx: fracn-gppll: update rate table clk: imx: imx8qxp: Parent should be initialized earlier than the clock clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks clk: imx: imx8qxp: Add LVDS bypass clocks clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one clk: imx: imx8mn: add sai7_ipg_clk clock settings clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D clk: imx: imx8mp: fix clock tree update of TF-A managed clocks clk: imx: fracn-gppll: fix fractional part of PLL getting lost clk: imx: composite-7ulp: Check the PCC present bit ...
2024-09-21Merge branches 'clk-assigned-rates', 'clk-renesas' and 'clk-scmi' into clk-nextStephen Boyd
* clk-assigned-rates: clk: clk-conf: support assigned-clock-rates-u64 * clk-renesas: (34 commits) clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT clk: renesas: rzv2h: Add support for dynamic switching divider clocks clk: renesas: r9a08g045: Add clocks, resets and power domains for USB dt-bindings: clock: renesas,cpg-clocks: Add top-level constraints clk: renesas: r8a779h0: Add CANFD clock clk: renesas: Add RZ/V2H(P) CPG driver clk: renesas: Add family-specific clock driver for RZ/V2H(P) dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG clk: renesas: r8a779h0: Add PWM clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/G2M v3.0 (r8a774a3) clock clk: renesas: rcar-gen4: Remove unused default PLL2/3/4/6 configs clk: renesas: rcar-gen4: Remove unused fixed PLL clock types clk: renesas: rcar-gen4: Remove unused variable PLL2 clock type clk: renesas: r8a779h0: Model PLL1/2/3/4/6 as fractional PLLs clk: renesas: r8a779g0: Model PLL1/3/4/6 as fractional PLLs clk: renesas: r8a779f0: Model PLL1/2/3/6 as fractional PLLs clk: renesas: r8a779a0: Use defines for PLL control registers clk: renesas: rcar-gen4: Add support for fractional 9.24 PLLs clk: renesas: rcar-gen4: Add support for fixed variable PLLs clk: renesas: rcar-gen4: Add support for variable fractional PLLs ... * clk-scmi: clk: scmi: add is_prepared hook
2024-09-21Merge branches 'clk-kunit', 'clk-mediatek', 'clk-cleanup' and 'clk-bindings' ↵Stephen Boyd
into clk-next - KUnit tests for clk registration and fixed rate basic clk type * clk-kunit: clk: Add KUnit tests for clks registered with struct clk_parent_data clk: Add KUnit tests for clk fixed rate basic type clk: Add test managed clk provider/consumer APIs platform: Add test managed platform_device/driver APIs of: Add a KUnit test for overlays and test managed APIs dt-bindings: vendor-prefixes: Add "test" vendor for KUnit and friends of: Add test managed wrappers for of_overlay_apply()/of_node_put() of/platform: Allow overlays to create platform devices from the root node * clk-mediatek: dt-bindings: clock: mediatek: Convert MediaTek clock syscons to schema dt-bindings: Move Mediatek clock controllers to "clock" directory dt-bindings: clock: mediatek,apmixedsys: Fix "mediatek,mt6779-apmixed" compatible clk: mediatek: reset: Remove unused mtk_register_reset_controller() clk: mediatek: reset: Return regmap's error code * clk-cleanup: clk: starfive: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage clk: ti: dra7-atl: Fix leak of of_nodes clk:davinci: make use of dev_err_cast_probe() clk: bcm: bcm53573: fix OF node leak in init clk: lmk04832: Use devm_clk_get_enabled() helpers clk: visconti: Switch to use kmemdup_array() clk: mmp: Switch to use kmemdup_array() clk: hisilicon: Remove unnecessary local variable clk: use clk_core_unlink_consumer() helper clk: Use of_property_present() clk: at91: Use of_property_count_u32_elems() to get property length da8xx-cfgchip.c: replace of_node_put with __free improves cleanup * clk-bindings: dt-bindings: clock: st,stm32mp1-rcc: add top-level constraints dt-bindings: clock: cirrus,lochnagar: add top-level constraints dt-bindings: clock: baikal,bt1-ccu-div: add top-level constraints dt-bindings: clock: nxp,lpc3220-usb-clk: Convert bindings to dtschema dt-bindings: clock: nxp,lpc3220-clk: Convert bindings to DT schema
2024-09-21Merge tag 'sched_ext-for-6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext support from Tejun Heo: "This implements a new scheduler class called ‘ext_sched_class’, or sched_ext, which allows scheduling policies to be implemented as BPF programs. The goals of this are: - Ease of experimentation and exploration: Enabling rapid iteration of new scheduling policies. - Customization: Building application-specific schedulers which implement policies that are not applicable to general-purpose schedulers. - Rapid scheduler deployments: Non-disruptive swap outs of scheduling policies in production environments" See individual commits for more documentation, but also the cover letter for the latest series: Link: https://lore.kernel.org/all/20240618212056.2833381-1-tj@kernel.org/ * tag 'sched_ext-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (110 commits) sched: Move update_other_load_avgs() to kernel/sched/pelt.c sched_ext: Don't trigger ops.quiescent/runnable() on migrations sched_ext: Synchronize bypass state changes with rq lock scx_qmap: Implement highpri boosting sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq() sched_ext: Compact struct bpf_iter_scx_dsq_kern sched_ext: Replace consume_local_task() with move_local_task_to_local_dsq() sched_ext: Move consume_local_task() upward sched_ext: Move sanity check and dsq_mod_nr() into task_unlink_from_dsq() sched_ext: Reorder args for consume_local/remote_task() sched_ext: Restructure dispatch_to_local_dsq() sched_ext: Fix processs_ddsp_deferred_locals() by unifying DTL_INVALID handling sched_ext: Make find_dsq_for_dispatch() handle SCX_DSQ_LOCAL_ON sched_ext: Refactor consume_remote_task() sched_ext: Rename scx_kfunc_set_sleepable to unlocked and relocate sched_ext: Add missing static to scx_dump_data sched_ext: Add missing static to scx_has_op[] sched_ext: Temporarily work around pick_task_scx() being called without balance_scx() sched_ext: Add a cgroup scheduler which uses flattened hierarchy sched_ext: Add cgroup support ...
2024-09-21Merge tag 's390-6.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Optimize ftrace and kprobes code patching and avoid stop machine for kprobes if sequential instruction fetching facility is available - Add hiperdispatch feature to dynamically adjust CPU capacity in vertical polarization to improve scheduling efficiency and overall performance. Also add infrastructure for handling warning track interrupts (WTI), allowing for graceful CPU preemption - Rework crypto code pkey module and split it into separate, independent modules for sysfs, PCKMO, CCA, and EP11, allowing modules to load only when the relevant hardware is available - Add hardware acceleration for HMAC modes and the full AES-XTS cipher, utilizing message-security assist extensions (MSA) 10 and 11. It introduces new shash implementations for HMAC-SHA224/256/384/512 and registers the hardware-accelerated AES-XTS cipher as the preferred option. Also add clear key token support - Add MSA 10 and 11 processor activity instrumentation counters to perf and update PAI Extension 1 NNPA counters - Cleanup cpu sampling facility code and rework debug/WARN_ON_ONCE statements - Add support for SHA3 performance enhancements introduced with MSA 12 - Add support for the query authentication information feature of MSA 13 and introduce the KDSA CPACF instruction. Provide query and query authentication information in sysfs, enabling tools like cpacfinfo to present this data in a human-readable form - Update kernel disassembler instructions - Always enable EXPOLINE_EXTERN if supported by the compiler to ensure kpatch compatibility - Add missing warning handling and relocated lowcore support to the early program check handler - Optimize ftrace_return_address() and avoid calling unwinder - Make modules use kernel ftrace trampolines - Strip relocs from the final vmlinux ELF file to make it roughly 2 times smaller - Dump register contents and call trace for early crashes to the console - Generate ptdump address marker array dynamically - Fix rcu_sched stalls that might occur when adding or removing large amounts of pages at once to or from the CMM balloon - Fix deadlock caused by recursive lock of the AP bus scan mutex - Unify sync and async register save areas in entry code - Cleanup debug prints in crypto code - Various cleanup and sanitizing patches for the decompressor - Various small ftrace cleanups * tag 's390-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (84 commits) s390/crypto: Display Query and Query Authentication Information in sysfs s390/crypto: Add Support for Query Authentication Information s390/crypto: Rework RRE and RRF CPACF inline functions s390/crypto: Add KDSA CPACF Instruction s390/disassembler: Remove duplicate instruction format RSY_RDRU s390/boot: Move boot_printk() code to own file s390/boot: Use boot_printk() instead of sclp_early_printk() s390/boot: Rename decompressor_printk() to boot_printk() s390/boot: Compile all files with the same march flag s390: Use MARCH_HAS_*_FEATURES defines s390: Provide MARCH_HAS_*_FEATURES defines s390/facility: Disable compile time optimization for decompressor code s390/boot: Increase minimum architecture to z10 s390/als: Remove obsolete comment s390/sha3: Fix SHA3 selftests failures s390/pkey: Add AES xts and HMAC clear key token support s390/cpacf: Add MSA 10 and 11 new PCKMO functions s390/mm: Add cond_resched() to cmm_alloc/free_pages() s390/pai_ext: Update PAI extension 1 counters s390/pai_crypto: Add support for MSA 10 and 11 pai counters ...
2024-09-21Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...
2024-09-21Merge tag 'mm-stable-2024-09-20-02-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Along with the usual shower of singleton patches, notable patch series in this pull request are: - "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. - "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. - "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. - "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. - "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. - "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". - "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. - "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". - "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. - "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. - "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. - "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. - "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. - "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. - "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). - "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. - "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, - "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. - "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. - "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. - "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. - "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. - "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. - "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. - "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. - "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. - "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. - "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). - "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! - "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. - "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. - "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. - "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. - "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. - "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. - "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. - "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. - "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. - "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. - "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. - "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. - "mm: split underused THPs" from Yu Zhao. Improve THP=always policy. This was overprovisioning THPs in sparsely accessed memory areas. - "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. - "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. - "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. - "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. - "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. - "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. - "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios" * tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits) zram: free secondary algorithms names uprobes: turn xol_area->pages[2] into xol_area->page uprobes: introduce the global struct vm_special_mapping xol_mapping Revert "uprobes: use vm_special_mapping close() functionality" mm: support large folios swap-in for sync io devices mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios mm: fix swap_read_folio_zeromap() for large folios with partial zeromap mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries set_memory: add __must_check to generic stubs mm/vma: return the exact errno in vms_gather_munmap_vmas() memcg: cleanup with !CONFIG_MEMCG_V1 mm/show_mem.c: report alloc tags in human readable units mm: support poison recovery from copy_present_page() mm: support poison recovery from do_cow_fault() resource, kunit: add test case for region_intersects() resource: make alloc_free_mem_region() works for iomem_resource mm: z3fold: deprecate CONFIG_Z3FOLD vfio/pci: implement huge_fault support mm/arm64: support large pfn mappings mm/x86: support large pfn mappings ...
2024-09-21Merge tag 'i2c-host-6.12' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow The DesignWare and the Renesas I2C drivers have received most of the changes in this pull request. The first has has undergone through a series of cleanups that have been sent to the mailing list a year ago for the first time and finally get merged in this pull request. They are many, from typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline functions to librarieas) and many others. Besides that, all the DesignWare Kconfig options have been grouped under the I2C_DESIGNWARE_CORE and this required some adaptation in many of the kernel configuration files for different arm and mips boards. Follows the list of the rest of the changes grouped by type of change. Cleanups -------- The Qualcomm Geni platform improves the exit path in the runtime resume function. The Intel LJCA driver loses "target_addr" parameter in ljca_i2c_stop() because it was unused. The MediaTek controller intializes the restart_flag in the transfer function using the ternary conditional operator ("? :") instead of initializing it in different parts. Constified a few global data structures in the virtio driver. The Renesas driver simplifies the bus speed handling in the init function making it more readable. Improved an if/else statement in probe function of the Renesas R-Car driver. The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS(). Still in the iMX/MXC driver a comma ',' has been replaced by a semicolon ';', while in different drivers the ',' has been removed from the '{ }' delimiters. Finally three devm_clk_get_enabled() have been used to simplify the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2, Ingenic and MPC drivers. Refactors --------- The Nuvoton fixes a potential out of boundary array access. This is not a bug fix because the issue could never occur due to hardware not having the properties listed in the array. The change makes the driver more future proof and, at the same time, silences code analyzers. Improvements ------------ The Renesas I2C (riic) driver undergoes several patches improving the runtime power management handling. The Intel i801 driver uses a more descriptive adapter's name to show the presence of the IDF feature. In the Intel Denverton (ismt) adapter the pending transactions are killed when irq's can't complete their handling, triggering a timeout. This could have been considered as a bug fix, but because, standing to Vasily, it's very sporadic, I preferred considering the patch rather as an improvement. New Feature ----------- The Renesas I2C (riic) driver now supports the fast mode plus. New support ----------- Added support for: - Renesas R9A08G045 - Rockchip RK3576 - KEBA I2C - Theobroma Systems Mule Multiplexer. The Keba comes with a new driver, i2c-keba.c. The Mule is an i2c multiplexer and it also comes with a new driver, mux/i2c-mux-mule.c. Core patch ---------- This pull request includes also a patch in the I2C framework, in i2c-core-base.c where the runtime PM functions have been replaced in order to allow to be accessed during the device add. Devicetree ---------- Some cleanups in the devicetree, as well. nVidia and Qualcomm bindings improve their "if:then:" blocks. While the aspeed binding loses the "multi-master" property because it was redundant. The i2c-sprd binding has been converted to YAML.
2024-09-21crypto: caam - Pad SG length when allocating hash edescHerbert Xu
Because hardware will read in multiples of 4 SG entries, ensure the allocated length is always padded. This was already done by some callers of ahash_edesc_alloc, but ahash_digest was conspicuously missing. In any case, doing it in the allocation function ensures that the memory is always there. Reported-by: Guangwu Zhang <guazhang@redhat.com> Fixes: a5e5c13398f3 ("crypto: caam - fix S/G table passing page boundary") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-09-21driver core: fix async device shutdown hangStuart Hayes
Modify device_shutdown() so that supplier devices do not wait for consumer devices to be shut down first when the devlink is sync state only, since the consumer is not dependent on the supplier in this case. Without this change, a circular dependency could hang the system. Fixes: 8064952c6504 ("driver core: shut down devices asynchronously") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Tested-by: Laurence Oberman <loberman@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240919043143.1194950-1-stuart.w.hayes@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-20ntb: Force physically contiguous allocation of rx ring buffersDave Jiang
Physical addresses under IOVA on x86 platform are mapped contiguously as a side effect before the patch that removed CONFIG_DMA_REMAP. The NTB rx buffer ring is a single chunk DMA buffer that is allocated against the NTB PCI device. If the receive side is using a DMA device, then the buffers are remapped against the DMA device before being submitted via the dmaengine API. This scheme becomes a problem when the physical memory is discontiguous. When dma_map_page() is called on the kernel virtual address from the dma_alloc_coherent() call, the new IOVA mapping no longer points to all the physical memory allocated due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs() in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best fix for the circumstance. A potential future solution may be having the DMA mapping API providing a way to alias an existing IOVA mapping to a new device perhaps. This fix is not to fix the patch pointed to by the fixes tag, but to fix the issue arised in the ntb_transport driver on x86 platforms after the said patch is applied. Reported-by: Jerry Dai <jerry.dai@intel.com> Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") Tested-by: Jerry Dai <jerry.dai@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20ntb: ntb_hw_switchtec: Fix use after free vulnerability in ↵Kaixin Wang
switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20ntb: idt: Fix the cacography in ntb_hw_idt.czhang jiao
The word 'swtich' is wrong, so fix it. Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20NTB: epf: don't misuse kernel-doc markerRandy Dunlap
Use "/*" instead of "/**" for common C comments to prevent warnings from scripts/kernel-doc. ntb_hw_epf.c:15: warning: expecting prototype for Host side endpoint driver to implement Non(). Prototype was for NTB_EPF_COMMAND() instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: ntb@lists.linux.dev Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20NTB: ntb_transport: fix all kernel-doc warningsRandy Dunlap
Fix all kernel-doc warnings in ntb_transport.c. The function parameters for ntb_transport_create_queue() changed, so update them in the kernel-doc comments. Add a Returns: comment for ntb_transport_register_client_dev(). ntb_transport.c:382: warning: No description found for return value of 'ntb_transport_register_client_dev' ntb_transport.c:1984: warning: Excess function parameter 'rx_handler' description in 'ntb_transport_create_queue' ntb_transport.c:1984: warning: Excess function parameter 'tx_handler' description in 'ntb_transport_create_queue' ntb_transport.c:1984: warning: Excess function parameter 'event_handler' description in 'ntb_transport_create_queue' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: ntb@lists.linux.dev Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20ntb: Constify struct bus_typeChristophe JAILLET
'struct bus_type' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 69682 4593 152 74427 122bb drivers/ntb/ntb_transport.o 5847 448 32 6327 18b7 drivers/ntb/core.o After: ===== text data bss dec hex filename 69858 4433 152 74443 122cb drivers/ntb/ntb_transport.o 6007 288 32 6327 18b7 drivers/ntb/core.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20ntb_perf: Fix printk formatMax Hawking
The correct printk format is %pa or %pap, but not %pa[p]. Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk") Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()Jinjie Ruan
The debugfs_create_dir() function returns error pointers. It never returns NULL. So use IS_ERR() to check it. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2024-09-20perf/riscv-sbi: Add platform specific firmware event handlingMayuresh Chitale
The SBI v2.0 specification pointed to by the link below reserves the event code 0xffff for platform specific firmware events. Update the driver to be able to parse and program such events. The platform specific firmware events must now be specified in the perf command as below: perf stat -e rCxxx ... where bits[63:62] = 0x3 of the event config indicate a platform specific firmware event and xxx indicate the actual event code which is passed as the event data. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-20spi: atmel-quadspi: Avoid overwriting delay register settingsAlexander Dahl
Previously the MR and SCR registers were just set with the supposedly required values, from cached register values (cached reg content initialized to zero). All parts fixed here did not consider the current register (cache) content, which would make future support of cs_setup, cs_hold, and cs_inactive impossible. Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over the current setting, without resetting the bits first. All writes to MR did not consider possible settings of DLYCS and DLYBCT. Signed-off-by: Alexander Dahl <ada@thorsis.com> Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing") Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-20Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.12 merge window.
2024-09-20Input: adp5588-keys - fix check on return codeNuno Sa
During adp5588_setup(), we read all the events to clear the event FIFO. However, adp5588_read() just calls i2c_smbus_read_byte_data() which returns the byte read in case everything goes well. Hence, we need to explicitly check for a negative error code instead of checking for something different than 0. Fixes: e960309ce318 ("Input: adp5588-keys - bail out on returned error") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-20spi: airoha: remove read cache in airoha_snand_dirmap_read()Lorenzo Bianconi
Current upstream driver reports errors running mtd_oobtest kernel module test: root@OpenWrt:/# insmod mtd_test.ko root@OpenWrt:/# insmod mtd_oobtest.ko dev=5 [ 7023.730584] ================================================= [ 7023.736399] mtd_oobtest: MTD device: 5 [ 7023.740160] mtd_oobtest: MTD device size 3670016, eraseblock size 131072, page size 2048, count of eraseblocks 28, pages per eraseblock 64, OOB size 128 [ 7023.753837] mtd_test: scanning for bad eraseblocks [ 7023.758636] mtd_test: scanned 28 eraseblocks, 0 are bad [ 7023.763861] mtd_oobtest: test 1 of 5 [ 7024.042076] mtd_oobtest: writing OOBs of whole device [ 7024.682069] mtd_oobtest: written up to eraseblock 0 [ 7041.962077] mtd_oobtest: written 28 eraseblocks [ 7041.966626] mtd_oobtest: verifying all eraseblocks [ 7041.972276] mtd_oobtest: error @addr[0x0:0x0] 0xff -> 0xe diff 0xf1 [ 7041.978550] mtd_oobtest: error @addr[0x0:0x1] 0xff -> 0x10 diff 0xef [ 7041.984932] mtd_oobtest: error @addr[0x0:0x2] 0xff -> 0x82 diff 0x7d [ 7041.991293] mtd_oobtest: error @addr[0x0:0x3] 0xff -> 0x10 diff 0xef [ 7041.997659] mtd_oobtest: error @addr[0x0:0x4] 0xff -> 0x0 diff 0xff [ 7042.003942] mtd_oobtest: error @addr[0x0:0x5] 0xff -> 0x8a diff 0x75 [ 7042.010294] mtd_oobtest: error @addr[0x0:0x6] 0xff -> 0x20 diff 0xdf [ 7042.016659] mtd_oobtest: error @addr[0x0:0x7] 0xff -> 0x1 diff 0xfe [ 7042.022935] mtd_oobtest: error @addr[0x0:0x8] 0xff -> 0x2e diff 0xd1 [ 7042.029295] mtd_oobtest: error @addr[0x0:0x9] 0xff -> 0x40 diff 0xbf [ 7042.035661] mtd_oobtest: error @addr[0x0:0xa] 0xff -> 0x0 diff 0xff [ 7042.041935] mtd_oobtest: error @addr[0x0:0xb] 0xff -> 0x89 diff 0x76 [ 7042.048300] mtd_oobtest: error @addr[0x0:0xc] 0xff -> 0x82 diff 0x7d [ 7042.054662] mtd_oobtest: error @addr[0x0:0xd] 0xff -> 0x15 diff 0xea [ 7042.061014] mtd_oobtest: error @addr[0x0:0xe] 0xff -> 0x90 diff 0x6f [ 7042.067380] mtd_oobtest: error @addr[0x0:0xf] 0xff -> 0x0 diff 0xff .... [ 7432.421369] mtd_oobtest: error @addr[0x237800:0x36] 0xff -> 0x5f diff 0xa0 [ 7432.428242] mtd_oobtest: error @addr[0x237800:0x37] 0xff -> 0x21 diff 0xde [ 7432.435118] mtd_oobtest: error: verify failed at 0x237800 [ 7432.440510] mtd_oobtest: error: too many errors [ 7432.445053] mtd_oobtest: error -1 occurred The above errors are due to the buggy logic in the 'read cache' available in airoha_snand_dirmap_read() routine since there are some corner cases where we are missing data updates. Since we do not get any read/write speed improvement using the cache (according to the mtd_speedtest kernel module test), in order to fix the mtd_oobtest test, remove the 'read cache' in airoha_snand_dirmap_read routine. Now the driver is passing all the tests available in mtd_test suite. Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver") Tested-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240919-airoha-spi-fixes-v2-1-cb0f0ed9920a@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-19Merge branch 'pci/misc'Bjorn Helgaas
- Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) * pci/misc: PCI: Fix typos PCI/VPD: Remove pci_vpd_release() unused declarations PCI/PM: Remove __pci_pme_wakeup() unused declarations PCI: Make pci_bus_type constant x86/PCI: Check pcie_find_root_port() return for NULL
2024-09-19Merge branch 'pci/quirks'Bjorn Helgaas
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) * pci/quirks: PCI: Mark Creative Labs EMU20k2 INTx masking as broken PCI: Add ACS quirk for Qualcomm SA8775P
2024-09-19Merge branch 'pci/controller/xilinx'Bjorn Helgaas
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) * pci/controller/xilinx: PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge arm64: zynqmp: Add PCIe phys property for ZCU102 PCI: xilinx-nwl: Add PHY support dt-bindings: pci: xilinx-nwl: Add phys property PCI: xilinx-nwl: Clean up clock on probe failure/removal PCI: xilinx-nwl: Rate-limit misc interrupt messages PCI: xilinx-nwl: Fix register misspelling PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
2024-09-19Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Fix whitespace indentation issues (Riyan Dhiman) * pci/controller/vmd: PCI: vmd: Fix indentation issue in vmd_shutdown()
2024-09-19Merge branch 'pci/controller/rcar-gen4'Bjorn Helgaas
- Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) * pci/controller/rcar-gen4: dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4M compatible dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4M compatible PCI: rcar-gen4: Make read-only const array check_addr static
2024-09-19Merge branch 'pci/controller/qcom'Bjorn Helgaas
- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add Manivannan Sadhasivam as maintainer of qcom endpoint driver (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan Sadhasivam) - Cache maximum link speed value in dw_pcie.max_link_speed for use by vendor drivers (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) * pci/controller/qcom: PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names PCI: endpoint: Assign PCI domain number for endpoint controllers dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property dt-bindings: PCI: pci-ep: Update Maintainers PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event PCI: qcom-ep: Drop the redundant masking of global IRQ events
2024-09-19Merge branch 'pci/controller/mediatek-gen3'Bjorn Helgaas
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) * pci/controller/mediatek-gen3: PCI: mediatek-gen3: Add Airoha EN7581 support PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset lines PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structure dt-bindings: PCI: mediatek-gen3: Add support for Airoha EN7581
2024-09-19Merge branch 'pci/controller/mediatek'Bjorn Helgaas
- Drop excess mtk_pcie.mem kerneldoc description (Bjorn Helgaas) * pci/controller/mediatek: PCI: mediatek: Drop excess mtk_pcie.mem kerneldoc description
2024-09-19Merge branch 'pci/controller/loongson'Bjorn Helgaas
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) * pci/controller/loongson: PCI/ACPI: Increase Loongson max PCI hosts to 8
2024-09-19Merge branch 'pci/controller/kirin'Bjorn Helgaas
- Fix potential buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) * pci/controller/kirin: PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port()
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:01:55 +0000