summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-04-07rtl8xxxu: Use enums for chip version numbersJes Sorensen
With support for more chips being added, use an enum to specify the chip version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Update some register definitionsJes Sorensen
Improve descriptive names of some registers and add some additional registers only found on nextgen chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: 8192eu uses txdesc40Jes Sorensen
8192eu uses the new TX descriptor format Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: TXDESC_SHORT_GI is txdesc32 onlyJes Sorensen
This is no short GI bit in the txdesc40 format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Correct txdesc40 gid definitionJes Sorensen
txdesc40 dword2 gid is a 6 bit field, not a single bit Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Rename TX descriptor bits to map them to 32/40 byte descriptorsJes Sorensen
With the size based naming of TX descriptors. Change the bit definition namings to indicate which descriptor format they match, rather than having a device name in the bit name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Change name of struct tx_desc to be more decriptiveJes Sorensen
There are two major types of TX descriptor formats for the RTL parts, the old 32 byte descriptor, and the newer 40 byte descriptor used by the 8723bu, 8192eu, and 88xx series. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: fix NULL pointer dereference errorWei-Ning Huang
In mwifiex_enable_hs, we need to check if priv->wdev.wiphy->wowlan_config is NULL before accessing its member. This sometimes cause kernel panic when suspend/resume. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: ie_list is an array, so no need to check if NULLColin Ian King
ap_ie->ie_list is an array of struct mwifiex_ie and can never be null, so the null check on this array is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix more memory leaks in __il4965_up()Julian Calaby
In some of the non-success return paths, the memory allocated by iwl4965_sta_alloc_lq() in iwl4965_alloc_bcast_station() is not freed. In particular: - if the card isn't ready after il4965_prepare_card_hw() - if the card is hardware-rfkilled In the hardware rfkilled path, the driver enables the rfkill interrupt. When the card is unrfkilled and this interrupt is raised we end up calling il4965_bg_restart() which calls __il4965_up() which calls iwl4965_alloc_bcast_station() again. Suggested-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a memory leak in error handling code of __il4965_upJia-Ju Bai
When il4965_hw_nic_init in __il4965_up fails, the memory allocated by iwl4965_sta_alloc_lq in iwl4965_alloc_bcast_station is not freed. This patches adds il_dealloc_bcast_stations in the error handling code of __il4965_up to fix this problem. This patch has been tested in real device, and it actually fixes the bug. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Move variable initialisation into error codeMarkus Elfring
In rsi_send_data_pkt(), it's a little more logical to assign 'status' in the actual error handling code as opposed to at the top of the functon. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Deleted controversial bits, rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring
In rsi_send_data_pkt(), the following variables are assigned to before they're used: * tmp_hdr - Assigned on line 47, first used on line 48 * bss - Assigned on line 41, first used on line 44 * extnd_size - Assigned on line 50, first used on line 52 * seq_num - Assigned on line 48, first used on line 96 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring
In rsi_send_mgmt_pkt(), the following variables are assigned to before they're used: * wh - Assigned on line 161, first used on line 180 * bss - Assigned on line 160, first used on line 196 * msg - Assigned on line 168, first used on line 175 * extnd_size - Assigned on line 139, first used on line 142 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl818x_pci: Disable pci device in error handling codeJia-Ju Bai
When pci_request_regions in rtl8180_probe fails, pci_disable_device is not called to disable the device which is enabled by pci_enbale_device. This patch fixes the problem by adding a new lable in error handling code. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07b43: Fix memory leaks in b43_bus_dev_ssb_init and b43_bus_dev_bcma_initJia-Ju Bai
The memory allocated by kzalloc in b43_bus_dev_ssb_init and b43_bus_dev_bcma_init is not freed. This patch fixes the bug by adding kfree in b43_ssb_remove, b43_bcma_remove and error handling code of b43_bcma_probe. Thanks Michael for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a null pointer dereference in il_tx_queue_free and ↵Jia-Ju Bai
il_cmd_queue_free If "txq->cmd = kzalloc(...)" in il_tx_queue_init fails, "kfree(txq->cmd[i])" in il_tx_queue_free and il_cmd_queue_free in iwl4965_hw_txq_ctx_free will causes a null pointer dereference, because txq->cmd is NULL at that time. This patch fixes this problem by adding a if-check before kfree. To avoid double free in il_tx_queue_free and il_cmd_queue_free caused by the fixing, txq->meta and txq->cmd in error handling code of il_tx_queue_init are assigned null values. Otherwise, a double free will occur. This patch has been tested in real device, and it actually fixes the bug. Thanks Stanislaw for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwlegacy: Return directly if allocation fails in il_eeprom_init()Markus Elfring
Also remove an unused label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07brcmfmac: Delete unnecessary variable initialisationMarkus Elfring
In brcmf_sdio_download_firmware(), bcmerror is set by the call to brcmf_sdio_download_code_file(), before it's checked in the following line. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ath9k_htc: Delete unnecessary variable initialisationMarkus Elfring
In ath9k_hif_usb_rx_stream(), i is initialised in the for loop it's used in. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtlwifi: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wl1251: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wlcore: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ipw2x00: use to_pci_dev()Geliang Tang
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ath9k: Remove unnecessary ?: operatorIvan Safonov
"(thermometer < 0) ? 0 : (thermometer == X)" is equivalent to "thermometer == X" for X >= 0. Signed-off-by: Ivan Safonov <insafonov@gmail.com> [Updated commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to e1000, e1000e, igb and Kconfig. Alex fixes igb where we were casting the MAC address as __beXX and then passing it into le32_to_cpu, when we could simply cast as __lexx to maintain consistency since it is already little endian. Then enabled bulk free in transmit cleanup for igb. John Holland enables igb to pickup the MAC address from a device tree blob when CONFIG_OF has been enabled. Doron Shikmoni fixes a bug in the output of "ethtool -m ethX" where the data byte appeared duplicated. Stefan fixes up e1000 and e1000e ethtool offline tests which were calling dev_close() which causes IFF_UP to be cleared which removes teh interface routes and some addresses, so use ndo_stop() instead. Jiri Benc cleans up some old links in the Kconfig for Intel drivers where we referred to a URL which is no longer valid. I am so glad Jiri has the time in his day to spend clicking on and testing all the URL links in the the kernel. Arika Chen reverts the addition of a 'rtnl_unlock()' which had a unmatched 'rtnl_lock()' call before it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07ath10k: fix unconditional num_mpdus_ready subtractionRajkumar Manoharan
Decrement num_mpdus_ready only when rx amsdu is processed successfully. Not doing so, will result in leak and impact stabilty under low memory cases. Also commit 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") missed to removed unused skb list rx_q. Fixes: 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07ath10k: remove unnecessary warning for probe response dropsRajkumar Manoharan
qca99x0 and qca4019 solutions limit probe responses transmissions. Logging warning message for each probe response drop is flooding kernel log unnecessary with " failed to increase tx mgmt pending count: -16, dropping". Hence reducing log level to debug. Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07ath10k: fix calibration init sequence of qca99x0Rajkumar Manoharan
pre-calibration is meant for qca4019 which contains only caldata whereas calibration file is used by ar9888 and qca99x0 that contains both board data and caldata. So by definition both pre-cal-file and cal-file can not coexist. Keeping them in shared memory (union), is breaking boot sequence of qca99x0. Fix it by storing both binaries in separate memories. This issue is reported in ipq8064 platform which includes caldata in flash memory. Fixes: 3d9195ea19e4 ("ath10k: incorporate qca4019 cal data download sequence") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07Merge tag 'fixes-for-v4.6-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc3 We have two more fixes to f_midi. It should now behave much better. dwc3-keystone.c has gotten a fix which now allows it to work on keystone device when running in peripheral mode. A similar fix for DMA configuration was made for udc-core, too. We have a new PCI ID for Intel's Broxton platform. DWC3 can run on those platforms as well. And we also have some dwc2 got a fix for dr_mode usage, while renesas controller got 3 important fixes: a NULL pointer deref fix, IRQ <-> DMA race fix, and a fix to prevent a situation where we would queue a request to a disabled endpoint.
2016-04-07iommu/vt-d: Silence an uninitialized variable warningDan Carpenter
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu/rockchip: Fix "is stall active" checkJohn Keeping
Since commit cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu: Don't overwrite domain pointer when there is no default_domainJoerg Roedel
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: stable@vger.kernel.org # v4.4+ Fixes: 1228236de5f9 ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07firmware: qemu_fw_cfg.c: hold ACPI global lock during device accessGabriel Somlo
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07virtio: virtio 1.0 cs04 spec compliance for resetMichael S. Tsirkin
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2016-04-07qemu_fw_cfg: don't leak kobj on init errorMichael S. Tsirkin
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-06Revert "igb: Fix a deadlock in igb_sriov_reinit"Arika Chen
This reverts commit 3eb14ea8d958 ("igb: Fix a deadlock in igb_sriov_reinit") It is the same as commit f468adc944ef ("igb: missing rtnl_unlock in igb_sriov_reinit()") There is no rtnl_lock() in igb_resume before, rtnl_unlock will cause a deadlock. Signed-off-by: Arika Chen <arika.chen@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06net: intel: remove dead linksJiri Benc
The Kconfig for Intel NICs references two different URLs for the "Adapter & Driver ID Guide". Neither of those two links works. The current URL seems to be http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000005584.html but given it's apparently constantly changing, there's no point in having it in the help text. Just keep a generic pointer to http://support.intel.com. Hopefully, this one will have a longer live. It still works, at least. Furthermore, remove a link to "the latest Intel PRO/100 network driver for Linux", this has no place in the mainline kernel and the latest Linux driver it offers is from 2006, anyway. Signed-off-by: Jiri Benc <jbenc@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40evf: properly handle VLAN featuresMitch Williams
Correctly set the VLAN feature flags after setting the rest of the netdev flags. And don't set them in hw_features, because these can't be controlled by the VF driver. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e/i40evf: Bump patch from 1.5.2 to 1.5.5Harshitha Ramamurthy
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Input set mask constants for RSS, flow director, and flex bytesKiran Patil
Add defines for input set mask (RSS, flow director, flexible payload), including defines specific to IPv6. Change-ID: Ie95ef7d0916a4d6ca011c194283f959774c8dce9 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Move NVM event wait check to NVM codeShannon Nelson
The logic that checks AQ events for NVM done events is better kept in nvm.c with the rest of the nvmupdate handling code. Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Add RSS configuration to virtual channelMitch Williams
Add opcodes and structures to support RSS configuration by PF driver on behalf of the VF drivers. This reduces complexity in the VF driver and allows us to support future hardware designs without modifying the VF driver. Change-ID: I8c75765c630eacb71f95967f1109a198542593ac Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Move NVM variable out of AQ structShannon Nelson
The NVM update status info should stay collected together, not spread across different structs. Change-ID: Ic16f9e9fd79945d865bb7226184c889884585025 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Restrict VF poll mode to only single function mode devicesShannon Nelson
The VFs can request their queues to be set up into polling mode, rather than interrupt mode, which works well for supporting things like DPDK, but this should not be available when working in an multi-function support device. Change-ID: Id36792e4e7422db8f2033336507211f68f14ff6f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e: Patch to support trusted VFAnjali Singhai Jain
This patch adds hook to support changing a VF from not-trusted to trusted and vice-versa. Fixed the wrappers and function prototype. Changed the dmesg to reflex the current state better. This patch also disables turning on/off trusted VF in MFP mode. Change-ID: Ibcd910935c01f0be1f3fdd6d427230291ee92ebe Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-06i40e/i40evf: Faster RX via avoiding FCoEJesse Brandeburg
As it turns out, calling into other files from hot path hurts performance a lot. In this case the majority of the time we call "check FCoE" and the packet is *not* FCoE, but this call was taking 5% of our total cycles spent on receive. Change-ID: I080552c26e7060bc7b78504dc2763f6f0b3d8c76 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 23:10:49 +0000