summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-21USB: hub: Ignore non-compliant devices with too many configs or interfacesAlan Stern
commit 2240fed37afbcdb5e8b627bc7ad986891100e05d upstream. Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: gadget: f_midi: fix MIDI Streaming descriptor lengthsJohn Keeping
commit da1668997052ed1cb00322e1f3b63702615c9429 upstream. While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be confusing. But elsewhere the driver consistently uses this to match the USB meaning of IN and OUT viewed from the host, so that "in" ports send data to the host and "out" ports receive data from it. Cc: stable <stable@kernel.org> Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphoneMathias Nyman
commit 159daf1258227f44b26b5d38f4aa8f37b8cca663 upstream. The fastboot tool for communicating with Android bootloaders does not work reliably with this device if USB 2 Link Power Management (LPM) is enabled. Various fastboot commands are affected, including the following, which usually reproduces the problem within two tries: fastboot getvar kernel getvar:kernel FAILED (remote: 'GetVar Variable Not found') This issue was hidden on many systems up until commit 63a1f8454962 ("xhci: stored cached port capability values in one place") as the xhci driver failed to detect USB 2 LPM support if USB 3 ports were listed before USB 2 ports in the "supported protocol capabilities". Adding the quirk resolves the issue. No drawbacks are expected since the device uses different USB product IDs outside of fastboot mode, and since fastboot commands worked before, until LPM was enabled on the tested system by the aforementioned commit. Based on a patch from Forest <forestix@nom.one> from which most of the code and commit message is taken. Cc: stable <stable@kernel.org> Reported-by: Forest <forestix@nom.one> Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net Tested-by: Forest <forestix@nom.one> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast distLei Huang
commit e169d96eecd447ff7fd7542ca5fa0911f5622054 upstream. Teclast disk used on Huawei hisi platforms doesn't work well, losing connectivity intermittently if LPM is enabled. Add quirk disable LPM to resolve the issue. Signed-off-by: Lei Huang <huanglei@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: core: fix pipe creation for get_bMaxPacketSize0Stefan Eichenberger
commit 4aac0db5a0ebc599d4ad9bf5ebab78afa1f33e10 upstream. When usb_control_msg is used in the get_bMaxPacketSize0 function, the USB pipe does not include the endpoint device number. This can cause failures when a usb hub port is reinitialized after encountering a bad cable connection. As a result, the system logs the following error messages: usb usb2-port1: cannot reset (err = -32) usb usb2-port1: Cannot enable. Maybe the USB cable is bad? usb usb2-port1: attempt power cycle usb 2-1: new high-speed USB device number 5 using ci_hdrc usb 2-1: device descriptor read/8, error -71 The problem began after commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads"). There usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the macro usb_rcvaddr0pipe, which does not include the endpoint device number. usb_get_device_descriptor, on the other hand, used the macro usb_rcvctrlpipe, which includes the endpoint device number. By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe instead of usb_rcvaddr0pipe, the issue can be resolved. This change will ensure that the endpoint device number is included in the USB pipe, preventing reinitialization failures. If the endpoint has not set the device number yet, it will still work because the device number is 0 in udev. Cc: stable <stable@kernel.org> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCIHuacai Chen
commit e71f7f42e3c874ac3314b8f250e8416a706165af upstream. LS7A EHCI controller doesn't have extended capabilities, so the EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS register should be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be fixed in future, now just clear the EECP field to avoid error messages on boot: ...... [ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff ...... [ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff ...... Cc: stable <stable@kernel.org> Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: xhci: Restore xhci_pci support for Renesas HCsMichal Pecio
commit c81d9fcd5b9402166048f377d4e5e0ee6f9ef26d upstream. Some Renesas HCs require firmware upload to work, this is handled by the xhci_pci_renesas driver. Other variants of those chips load firmware from a SPI flash and are ready to work with xhci_pci alone. A refactor merged in v6.12 broke the latter configuration so that users are finding their hardware ignored by the normal driver and are forced to enable the firmware loader which isn't really necessary on their systems. Let xhci_pci work with those chips as before when the firmware loader is disabled by kernel configuration. Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver") Cc: stable <stable@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726 Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Tested-by: Nicolai Buchwitz <nb@tipi-net.de> Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: dwc2: gadget: remove of_node reference upon udc_stopFabrice Gasnier
commit 58cd423820d5b5610977e55e4acdd06628829ede upstream. In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node" is set to hsotg->dev->of_node. It causes errors when binding the gadget driver several times, on stm32mp157c-ev1 board. Below error is seen: "pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0" The first time, no issue is seen as when registering the driver, of_node isn't NULL: -> gadget_dev_desc_UDC_store -> usb_gadget_register_driver_owner -> driver_register ... -> really_probe -> pinctrl_bind_pins (no effect) Then dwc2_hsotg_udc_start() sets of_node. The second time (stop the gadget, reconfigure it, then start it again), of_node has been set, so the probing code tries to acquire pins for the gadget. These pins are hold by the controller, hence the error. So clear gadget.dev.of_node in udc_stop() routine to avoid the issue. Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: gadget: udc: renesas_usb3: Fix compiler warningGuo Ren
commit 335a1fc1193481f8027f176649c72868172f6f8b upstream. drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe': drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] 2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^ Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/ Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: roles: set switch registered flag early onElson Roy Serrao
commit 634775a752a86784511018a108f3b530cc3399a7 upstream. The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: dwc3: Fix timeout issue during controller enter/exit from halt stateSelvarasu Ganesan
commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 upstream. There is a frequent timeout during controller enter/exit from halt state after toggling the run_stop bit by SW. This timeout occurs when performing frequent role switches between host and device, causing device enumeration issues due to the timeout. This issue was not present when USB2 suspend PHY was disabled by passing the SNPS quirks (snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS. However, there is a requirement to enable USB2 suspend PHY by setting of GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts in gadget or host mode results in the timeout issue. This commit addresses this timeout issue by ensuring that the bits GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting the dwc3_gadget_run_stop sequence and restoring them after the dwc3_gadget_run_stop sequence is completed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind ↵Selvarasu Ganesan
retries commit 9e8b21410f310c50733f6e1730bae5a8e30d3570 upstream. The current implementation sets the wMaxPacketSize of bulk in/out endpoints to 1024 bytes at the end of the f_midi_bind function. However, in cases where there is a failure in the first midi bind attempt, consider rebinding. This scenario may encounter an f_midi_bind issue due to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024 bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS speed only. Here the term "rebind" in this context refers to attempting to bind the MIDI function a second time in certain scenarios. The situations where rebinding is considered include: * When there is a failure in the first UDC write attempt, which may be caused by other functions bind along with MIDI. * Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to MIDI,ADB. This commit addresses this issue by resetting the wMaxPacketSize before endpoint claim. And here there is no need to reset all values in the usb endpoint descriptor structure, as all members except wMaxPacketSize and bEndpointAddress have predefined values. This ensures that restores the endpoint to its expected configuration, and preventing conflicts with value of ep->maxpacket_limit. It also aligns with the approach used in other function drivers, which treat endpoint descriptors as if they were full speed before endpoint claim. Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation") Cc: stable@vger.kernel.org Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()Jiang Liu
commit 1abb2648698bf10783d2236a6b4a7ca5e8021699 upstream. It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5VHans de Goede
[ Upstream commit 8f62ca9c338aae4f73e9ce0221c3d4668359ddd8 ] The Vexia EDU ATLA 10 tablet comes in 2 different versions with significantly different mainboards. The only outward difference is that the charging barrel on one is marked 5V and the other is marked 9V. Both ship with Android 4.4 as factory OS and have the usual broken DSDT issues for x86 Android tablets. Add a quirk to skip ACPI I2C client enumeration for the 5V version to complement the existing quirk for the 9V version. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20250123132202.18209-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VMAnkit Agrawal
[ Upstream commit 6a9eb2d125ba90d13b45bcfabcddf9f61268f6a8 ] There is a HW defect on Grace Hopper (GH) to support the Multi-Instance GPU (MIG) feature [1] that necessiated the presence of a 1G region carved out from the device memory and mapped as uncached. The 1G region is shown as a fake BAR (comprising region 2 and 3) to workaround the issue. The Grace Blackwell systems (GB) differ from GH systems in the following aspects: 1. The aforementioned HW defect is fixed on GB systems. 2. There is a usable BAR1 (region 2 and 3) on GB systems for the GPUdirect RDMA feature [2]. This patch accommodate those GB changes by showing the 64b physical device BAR1 (region2 and 3) to the VM instead of the fake one. This takes care of both the differences. Moreover, the entire device memory is exposed on GB as cacheable to the VM as there is no carveout required. Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1] Link: https://docs.nvidia.com/cuda/gpudirect-rdma/ [2] Cc: Kevin Tian <kevin.tian@intel.com> CC: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Link: https://lore.kernel.org/r/20250124183102.3976-3-ankita@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmemAnkit Agrawal
[ Upstream commit bd53764a60ad586ad5b6ed339423ad5e67824464 ] NVIDIA's recently introduced Grace Blackwell (GB) Superchip is a continuation with the Grace Hopper (GH) superchip that provides a cache coherent access to CPU and GPU to each other's memory with an internal proprietary chip-to-chip cache coherent interconnect. There is a HW defect on GH systems to support the Multi-Instance GPU (MIG) feature [1] that necessiated the presence of a 1G region with uncached mapping carved out from the device memory. The 1G region is shown as a fake BAR (comprising region 2 and 3) to workaround the issue. This is fixed on the GB systems. The presence of the fix for the HW defect is communicated by the device firmware through the DVSEC PCI config register with ID 3. The module reads this to take a different codepath on GB vs GH. Scan through the DVSEC registers to identify the correct one and use it to determine the presence of the fix. Save the value in the device's nvgrace_gpu_pci_core_device structure. Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1] CC: Jason Gunthorpe <jgg@nvidia.com> CC: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Link: https://lore.kernel.org/r/20250124183102.3976-2-ankita@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21vfio/pci: Enable iowrite64 and ioread64 for vfio pciRamesh Thomas
[ Upstream commit 2b938e3db335e3670475e31a722c2bee34748c5a ] Definitions of ioread64 and iowrite64 macros in asm/io.h called by vfio pci implementations are enclosed inside check for CONFIG_GENERIC_IOMAP. They don't get defined if CONFIG_GENERIC_IOMAP is defined. Include linux/io-64-nonatomic-lo-hi.h to define iowrite64 and ioread64 macros when they are not defined. io-64-nonatomic-lo-hi.h maps the macros to generic implementation in lib/iomap.c. The generic implementation does 64 bit rw if readq/writeq is defined for the architecture, otherwise it would do 32 bit back to back rw. Note that there are two versions of the generic implementation that differs in the order the 32 bit words are written if 64 bit support is not present. This is not the little/big endian ordering, which is handled separately. This patch uses the lo followed by hi word ordering which is consistent with current back to back implementation in the vfio/pci code. Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20241210131938.303500-2-ramesh.thomas@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-218250: microchip: pci1xxxx: Add workaround for RTS bit toggleRengarajan S
[ Upstream commit e95cb63e57381f00d9274533ea7fd0ac3bf4e5b0 ] In the B0 revision, the RTS pin remains high due to incorrect hardware mapping. To address this issue, enable auto-direction control with the RTS bit in ADCL_CFG_REG. This configuration ensures that the RTS pin goes low when the terminal is opened and high when the terminal is closed. Additionally, we reset the step counter for Rx and Tx engines by writing into FRAC_DIV_CFG_REG. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241218094017.18290-1-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21serial: 8250_pci: Share WCH IDs with parport_serial driverAndy Shevchenko
[ Upstream commit 535a07698b8b3e6f305673102d297262cae2360a ] parport_serial driver uses subset of WCH IDs that are present in 8250_pci. Share them via pci_ids.h and switch parport_serial to use defined constants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21serial: 8250_pci: Resolve WCH vendor ID ambiguityAndy Shevchenko
[ Upstream commit 16076ca3a1565491bcb28689e555d569a39391c7 ] There are two sites of the same brand: wch.cn and wch-ic.com. They are property of the same company, but it appears that they managed to get two different PCI vendor IDs. Rename them accordingly using standard pattern, i.e. PCI_VENDOR_ID_... While at it, move to PCI_VDEVICE() in the ID tables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241204031114.1029882-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21scsi: ufs: bsg: Set bsg_queue to NULL after removalGuixin Liu
[ Upstream commit 1e95c798d8a7f70965f0f88d4657b682ff0ec75f ] Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21PCI: switchtec: Add Microchip PCI100X device IDsRakesh Babu Saladi
[ Upstream commit a3282f84b2151d254dc4abf24d1255c6382be774 ] Add Microchip parts to the Device ID table so the driver supports PCI100x devices. Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA access via NTB to work when the IOMMU is turned on. PCI100x family has 6 variants; each variant is designed for different application usages, different port counts and lane counts: PCI1001 has 1 x4 upstream port and 3 x4 downstream ports PCI1002 has 1 x4 upstream port and 4 x2 downstream ports PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2 downstream ports PCI1004 has 4 x4 upstream ports PCI1005 has 1 x4 upstream port and 6 x2 downstream ports PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports [Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR Microsystems, which was acquired in 1996 by Standard Microsystems Corp, which was acquired by Microchip Technology in 2012. The PCI-SIG confirms that Vendor ID 0x1055 is assigned to Microchip even though it's not visible via https://pcisig.com/membership/member-companies] Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com> [bhelgaas: Vendor ID history] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21PCI/DPC: Quirk PIO log size for Intel Raptor Lake-PTakashi Iwai
[ Upstream commit b198499c7d2508a76243b98e7cca992f6fd2b7f7 ] Apparently the Raptor Lake-P reference firmware configures the PIO log size correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC. Zenbook UX3402VA_UX3402VA, do not. Apply the quirk for Raptor Lake-P. This prevents kernel complaints like: DPC: RP PIO log size 0 is invalid and also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. Note that the bug report also mentions 8086:a76e, which has been already added by 627c6db20703 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports"). Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623 Signed-off-by: Takashi Iwai <tiwai@suse.de> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_threadEdward Adam Davis
[ Upstream commit 1221989555db711578a327a9367f1be46500cb48 ] syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1] If dvb->mux is not initialized successfully by vidtv_mux_init() in the vidtv_start_streaming(), it will trigger null pointer dereference about mux in vidtv_mux_stop_thread(). Adjust the timing of streaming initialization and check it before stopping it. [1] KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471 Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8 RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125 RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128 RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188 R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710 FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline] vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252 dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000 dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486 dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3f8/0xb60 fs/file_table.c:450 task_work_run+0x14e/0x250 kernel/task_work.c:239 get_signal+0x1d3/0x2610 kernel/signal.c:2790 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+5e248227c80a3be8e96a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5e248227c80a3be8e96a Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: uvcvideo: Add Kurokesu C1 PRO cameraIsaac Scott
[ Upstream commit 2762eab6d4140781840f253f9a04b8627017248b ] Add support for the Kurokesu C1 PRO camera. This camera experiences the same issues faced by the Sonix Technology Co. 292A IPC AR0330. As such, enable the UVC_QUIRK_MJPEG_NO_EOF quirk for this device to prevent frames from being erroneously dropped. Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: uvcvideo: Add new quirk definition for the Sonix Technology Co. 292a ↵Isaac Scott
camera [ Upstream commit 81f8c0e138c43610cf09b8d2a533068aa58e538e ] The Sonix Technology Co. 292A camera (which uses an AR0330 sensor), can produce MJPEG and H.264 streams concurrently. When doing so, it drops the last packets of MJPEG frames every time the H.264 stream generates a key frame. Set the UVC_QUIRK_MJPEG_NO_EOF quirk to work around the issue. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com> Link: https://lore.kernel.org/r/20241128145144.61475-3-isaac.scott@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: uvcvideo: Implement dual stream quirk to fix loss of usb packetsIsaac Scott
[ Upstream commit c2eda35e675b6ea4a0a21a4b1167b121571a9036 ] Some cameras, such as the Sonix Technology Co. 292A, exhibit issues when running two parallel streams, causing USB packets to be dropped when an H.264 stream posts a keyframe while an MJPEG stream is running simultaneously. This occasionally causes the driver to erroneously output two consecutive JPEG images as a single frame. To fix this, we inspect the buffer, and trigger a new frame when we find an SOI. Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20241128145144.61475-2-isaac.scott@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: bcm2835-unicam: Disable trigger mode operationNaushir Patuck
[ Upstream commit 697a252bb2ea414cc1c0b4cf4e3d94a879eaf162 ] The imx219/imx708 sensors frequently generate a single corrupt frame (image or embedded data) when the sensor first starts. This can either be a missing line, or invalid samples within the line. This only occurrs using the upstream Unicam kernel driver. Disabling trigger mode elimiates this corruption. Since trigger mode is a legacy feature copied from the firmware driver and not expected to be needed, remove it. Tested on the Raspberry Pi cameras and shows no ill effects. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: i2c: ds90ub953: Add error handling for i2c reads/writesTomi Valkeinen
[ Upstream commit 0794c43ea1e451007e80246e1288ebbf44139397 ] Add error handling for i2c reads/writes in various places. Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com> Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/ Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: i2c: ds90ub913: Add error handling to ub913_hw_init()Tomi Valkeinen
[ Upstream commit acd8f58d7a3bce0fbd3263961cd09555c00464ba ] Add error handling to ub913_hw_init() using a new helper function, ub913_update_bits(). Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com> Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/ Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21media: cxd2841er: fix 64-bit division on gcc-9Arnd Bergmann
[ Upstream commit 8d46603eeeb4c6abff1d2e49f2a6ae289dac765e ] It appears that do_div() once more gets confused by a complex expression that ends up not quite being constant despite __builtin_constant_p() thinking it is: ERROR: modpost: "__aeabi_uldivmod" [drivers/media/dvb-frontends/cxd2841er.ko] undefined! Use div_u64() instead, forcing the expression to be evaluated first, and making it a bit more readable. Cc: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/ Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> [hverkuil: added Closes tags] Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI busJarkko Nikula
[ Upstream commit 30bb1ce71215645fa6a92f4fa8cbb8f58db68f12 ] Add a glue code for the MIPI I3C HCI on PCI bus with Intel Panther Lake I3C controller PCI IDs. MIPI I3C HCI on Intel platforms has additional logic around the MIPI I3C HCI core logic. Those together create so called I3C slice on PCI bus. Intel specific initialization code does a reset cycle to the I3C slice before probing the MIPI I3C HCI part. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20241231115904.620052-2-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21i3c: mipi-i3c-hci: Add Intel specific quirk to ring resumingJarkko Nikula
[ Upstream commit ccdb2e0e3b00d13df90ac7a0524dd855173f1171 ] MIPI I3C HCI on Intel hardware requires a quirk where ring needs to stop and set to run again after resuming the halted controller. This is not expected from the MIPI I3C HCI specification and is Intel specific. Add this quirk to generic aborted transfer handling and execute it only when ring is not in running state after a transfer error and attempted controller resume. This is the case on Intel hardware. It is not fully clear to me what is the ring running state in generic hardware in such case. I would expect if ring is not running, then stop request is a no-op and run request is either required or does the same what controller resume would do. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20241231115904.620052-1-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21soc/tegra: fuse: Update Tegra234 nvmem keepout listKartik Rajput
[ Upstream commit 836b341cc8dab680acc06a7883bfeea89680b689 ] Various Nvidia userspace applications and tests access following fuse via Fuse nvmem interface: * odmid * odminfo * boot_security_info * public_key_hash * reserved_odm0 * reserved_odm1 * reserved_odm2 * reserved_odm3 * reserved_odm4 * reserved_odm5 * reserved_odm6 * reserved_odm7 * odm_lock * pk_h1 * pk_h2 * revoke_pk_h0 * revoke_pk_h1 * security_mode * system_fw_field_ratchet0 * system_fw_field_ratchet1 * system_fw_field_ratchet2 * system_fw_field_ratchet3 * optin_enable Update tegra234_fuse_keepouts list to allow reading these fuse from nvmem sysfs interface. Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Link: https://lore.kernel.org/r/20241127061053.16775-1-kkartik@nvidia.com Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21fbdev: omap: use threaded IRQ for LCD DMAAaro Koskinen
[ Upstream commit e4b6b665df815b4841e71b72f06446884e8aad40 ] When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21firmware: qcom: scm: smc: Handle missing SCM deviceKrzysztof Kozlowski
[ Upstream commit 94f48ecf0a538019ca2025e0b0da391f8e7cc58c ] Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer dereference") makes it explicit that qcom_scm_get_tzmem_pool() can return NULL, therefore its users should handle this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-5-9061013c8d92@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21RDMA/efa: Reset device on probe failureMichael Margolin
[ Upstream commit 123c13f10ed3627ba112172d8bd122a72cae226d ] Make sure the device is being reset on driver exit whatever the reason is, to keep the device aligned and allow it to close shared resources (e.g. admin queue). Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Michael Margolin <mrgolin@amazon.com> Link: https://patch.msgid.link/20241225131548.15155-1-mrgolin@amazon.com Reviewed-by: Gal Pressman <gal.pressman@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume pathVasant Hegde
[ Upstream commit ef75966abf950c0539534effa4960caa29fb7167 ] With recent kernel, AMDGPU failed to resume after suspend on certain laptop. Sample log: ----------- Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080] Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013 Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000 This is because in resume path, CNTRL[EPHEn] is not set. Fix this by setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set. Note May be better approach is to save the control register in suspend path and restore it in resume path instead of trying to set indivisual bits. We will have separate patch for that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499 Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21gpiolib: Fix crash on error in gpiochip_get_ngpios()Andy Shevchenko
[ Upstream commit 7b4aebeecbbd5b5fe73e35fad3f62ed21aa7ef44 ] The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash. Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21xen/swiotlb: relax alignment requirementsJuergen Gross
[ Upstream commit 85fcb57c983f423180ba6ec5d0034242da05cc54 ] When mapping a buffer for DMA via .map_page or .map_sg DMA operations, there is no need to check the machine frames to be aligned according to the mapped areas size. All what is needed in these cases is that the buffer is contiguous at machine level. So carve out the alignment check from range_straddles_page_boundary() and move it to a helper called by xen_swiotlb_alloc_coherent() and xen_swiotlb_free_coherent() directly. Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers") Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm: Fix DSC BPP increment decodingImre Deak
[ Upstream commit e00a2e5d485faf53c7a24b9d1b575a642227947f ] Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can be non-zero as opposed to earlier DPCD versions, hence decoding the bit_per_pixel increment value at bits 2:0 in the same register requires applying a mask, do so. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()Jiang Liu
[ Upstream commit a0a455b4bc7483ad60e8b8a50330c1e05bb7bfcf ] In function psp_init_cap_microcode(), it should bail out when failed to load firmware, otherwise it may cause invalid memory access. Fixes: 07dbfc6b102e ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21amdkfd: properly free gang_ctx_bo when failed to init user queueZhu Lingshan
[ Upstream commit a33f7f9660705fb2ecf3467b2c48965564f392ce ] The destructor of a gtt bo is declared as void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj); Which takes void** as the second parameter. GCC allows passing void* to the function because void* can be implicitly casted to any other types, so it can pass compiling. However, passing this void* parameter into the function's execution process(which expects void** and dereferencing void**) will result in errors. Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21gpio: bcm-kona: Add missing newline to dev_err format stringArtur Weber
[ Upstream commit 615279db222c3ac56d5c93716efd72b843295c1f ] Add a missing newline to the format string of the "Couldn't get IRQ for bank..." error message. Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQArtur Weber
[ Upstream commit 57f5db77a915cc29461a679a6bcae7097967be1a ] The settings for all GPIOs are locked by default in bcm_kona_gpio_reset. The settings for a GPIO are unlocked when requesting it as a GPIO, but not when requesting it as an interrupt, causing the IRQ settings to not get applied. Fix this by making sure to unlock the right bits when an IRQ is requested. To avoid a situation where an IRQ being released causes a lock despite the same GPIO being used by a GPIO request or vice versa, add an unlock counter and only lock if it reaches 0. Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0Artur Weber
[ Upstream commit de1d0d160f64ee76df1d364d521b2faf465a091c ] The GPIO lock/unlock functions clear/write a bit to the relevant register for each bank. However, due to an oversight the bit that was being written was based on the total GPIO number, not the index of the GPIO within the relevant bank, causing it to fail for any GPIO above 32 (thus any GPIO for banks above bank 0). Fix lock/unlock for these banks by using the correct bit. Fixes: bdb93c03c550 ("gpio: bcm281xx: Centralize register locking") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/i915/selftests: avoid using uninitialized contextKrzysztof Karas
[ Upstream commit 53139b3f9998ea07289e7b70b909fea2264a0de9 ] There is an error path in igt_ppgtt_alloc(), which leads to ww object being passed down to i915_gem_ww_ctx_fini() without initialization. Correct that by only putting ppgtt->vm and returning early. Fixes: 480ae79537b2 ("drm/i915/selftests: Prepare gtt tests for obj->mm.lock removal") Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/iuaonpjc3rywmvhna6umjlvzilocn2uqsrxfxfob24e2taocbi@lkaivvfp4777 (cherry picked from commit 8d8334632ea62424233ac6529712868241d0f8df) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/xe/client: bo->client does not need bos_lockTejas Upadhyay
[ Upstream commit fc876c9524e2a9f816f51d533ed31df789cff65a ] bos_lock is to protect list of bos used by client, it is not required to protect bo->client so bring it outside of bos_lock. Fixes: b27970f3e11c ("drm/xe: Add tracking support for bos per client") Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250205051042.1991192-1-tejas.upadhyay@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit f74fd53ba34551b7626193fb70c17226f06e9bf1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21gpu: host1x: Fix a use of uninitialized mutexRupinderjit Singh
[ Upstream commit 02458fbfaa0170aabf8506f7d4ed054f02414251 ] commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198 [ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890 [ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28 [ 41.931289] ---[ end trace 0000000000000000 ]--- Inside the probe function when pm_runtime_enable() is called, the PM core invokes a resume callback if the device Host1x is in a suspended state. As it can be seen in the logs above, this leads to host1x_intr_start() function call which is trying to acquire a mutex lock. But, the function host_intr_init() only gets called after the pm_runtime_enable() where mutex is initialised leading to the use of mutex prior to its initialisation. Fix this by moving the mutex initialisation prior to the runtime PM enablement function pm_runtime_enable() in probe. Fixes: c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") Signed-off-by: Rupinderjit Singh <rusingh@redhat.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failuresMaxime Ripard
[ Upstream commit fb97bc2e47f694f79d6358d981ae0428db8e8088 ] The light_up_connector helper function in the HDMI infrastructure unit tests uses drm_atomic_set_crtc_for_connector(), but fails when it returns an error. This function can return EDEADLK though if the sequence needs to be restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it properly. Let's handle EDEADLK and restart the sequence in our tests as well. Fixes: eb66d34d793e ("drm/tests: Add output bpc tests") Reported-by: Dave Airlie <airlied@gmail.com> Closes: https://lore.kernel.org/r/CAPM=9tzJ4-ERDxvuwrCyUPY0=+P44orhp1kLWVGL7MCfpQjMEQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20241031091558.2435850-1-mripard@kernel.org Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-1-fe59c43805d5@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:31:37 +0000