| Age | Commit message (Collapse) | Author |
|---|
|
commit da6b353786997c0ffa67127355ad1d54ed3324c2 upstream.
If one of the waveform functions is called for a chip that only supports
.apply(), we want that an error code is returned and not a NULL pointer
exception.
Fixes: 6c5126c6406d ("pwm: Provide new consumer API functions for waveforms")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250123172709.391349-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01130f5260e5868fb6b15ab8c00dbc894139f48e upstream.
[Why]
When HUBP is power gated, the SW state can get out of sync with the
hardware state causing cursor to not be programmed correctly.
[How]
Similar to DPP, add a HUBP reset function which is called wherever
HUBP is initialized or powergated. This function will clear the cursor
position and attribute cache allowing for proper programming when the
HUBP is brought back up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d28d0ddb986f56920ac97ae704cc3340a699a30 upstream.
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Cc: stable@vger.kernel.org # v6.12+
Fixes: 32a7627cf3a3 ("[PATCH] md: optimised resync using Bitmap based intent logging")
Reported-and-tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-raid/ca3a91a2-50ae-4f68-b317-abd9889f3907@oracle.com/T/#m6e5086c95201135e4941fe38f9efa76daf9666c5
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250124092055.4050195-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1378ffec30367233152b7dbf4fa6a25ee98585d1 upstream.
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35da ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee1b5046d5cd892a0754ab982aeaaad3702083a5 upstream.
The following kernel oops is thrown when trying to remove the max96712
module:
Unable to handle kernel paging request at virtual address 00007375746174db
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000
[00007375746174db] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan
snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2
imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev
snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils
max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse
[last unloaded: imx8_isi]
CPU: 0 UID: 0 PID: 754 Comm: rmmod
Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17
Tainted: [C]=CRAP
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : led_put+0x1c/0x40
lr : v4l2_subdev_put_privacy_led+0x48/0x58
sp : ffff80008699bbb0
x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8
x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000
x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1
x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473
Call trace:
led_put+0x1c/0x40
v4l2_subdev_put_privacy_led+0x48/0x58
v4l2_async_unregister_subdev+0x2c/0x1a4
max96712_remove+0x1c/0x38 [max96712]
i2c_device_remove+0x2c/0x9c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x228
driver_detach+0x4c/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
i2c_del_driver+0x54/0x64
max96712_i2c_driver_exit+0x18/0x1d0 [max96712]
__arm64_sys_delete_module+0x1a4/0x290
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400)
---[ end trace 0000000000000000 ]---
This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata()
is called again and the data is overwritten to point to sd, instead of
priv. So, in remove(), the wrong pointer is passed to
v4l2_async_unregister_subdev(), leading to a crash.
Fixes: 5814f32fef13 ("media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f2b5237e313e39008a85b33ca94ab503a8fdff9 upstream.
This restores the original behavior that gets min/max freq from EDID and
only set DP/eDP connector as freesync capable if "sink device is capable
of rendering incoming video stream without MSA timing parameters", i.e.,
`allow_invalid_MSA_timing_params` is true. The condition was mistakenly
removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync
parser for DP").
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Alex Hung <alex.hung@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915
Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c225d006a31949d673e646d585d9569bc28feeb9 upstream.
Don't prematurely free the command. Wait for the status completion of
the sense status. It can be freed then. Otherwise we will double-free
the command.
Fixes: cff834c16d23 ("usb-gadget/tcm: Convert to TARGET_SCF_ACK_KREF I/O krefs")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae919ac431f16275e05ec819bdffb3ac5f44cbe1.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c79a39dc8d060b9e64e8b0fa9d245d44befeefbe upstream.
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c6ef3a7fa97ec823a1e1af9085cf13db9f7b3bac upstream.
If the uvc_status_init() function fails to allocate the int_urb, it will
free the dev->status pointer but doesn't reset the pointer to NULL. This
results in the kfree() call in uvc_status_cleanup() trying to
double-free the memory. Fix it by resetting the dev->status pointer to
NULL after freeing it.
Fixes: a31a4055473b ("V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241107235130.31372-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7378aeb664e5ebc396950b36a1f2dedf5aabec20 upstream.
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set.
Fixes: 08333b911f01 ("remoteproc: Directly use ida_alloc()/free()")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241122175127.2188037-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3d930411ce390e532470194296658a960887773 upstream.
Prevent double queueing of implicit ODP mr destroy work by using
__xa_cmpxchg() to make sure this is the only time we are destroying this
specific mr.
Without this change, we could try to invalidate this mr twice, which in
turn could result in queuing a MR work destroy twice, and eventually the
second work could execute after the MR was freed due to the first work,
causing a user after free and trace below.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130
Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib]
RIP: 0010:refcount_warn_saturate+0x12b/0x130
Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff
RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0
RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019
R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00
R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0
FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0x12b/0x130
free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib]
process_one_work+0x1cc/0x3c0
worker_thread+0x218/0x3c0
kthread+0xc6/0xf0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/r/c96b8645a81085abff739e6b06e286a350d1283d.1737274283.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d26c4ad3fa53e76a602a9974ade171c8399f2a29 upstream.
Allowing the usb_2 controller GDSC to be turned off during system suspend
renders the controller unable to resume.
So use PWRSTS_RET_ON instead in order to make sure this the GDSC doesn't
go down.
Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-clk-gcc-fix-usb2-gdsc-pwrsts-v1-1-e15d1a5e7d80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d27afbf256028a1f54363367f30efc8854433c3 upstream.
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2eb3da037c2c20fa30bc502bc092479b2a1aaae2 upstream.
As PD2.0 spec ("8.3.3.2.3 PE_SRC_Send_Capabilities state"), after the
Source receives the GoodCRC Message from the Sink in response to the
Source_Capabilities message, it should start the SenderResponseTimer,
after the timer times out, the state machine transitions to the
HARD_RESET state.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250105135245.7493-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3a9bd247cddfb6fa0c29c2361f70b76c359eaa0 upstream.
When the system begins to enter suspend mode, dwc3_suspend() is called
by PM suspend. There is a problem that if someone interrupt the system
suspend process between dwc3_suspend() and pm_suspend() of its parent
device, PM suspend will be canceled and attempt to resume suspended
devices so that dwc3_resume() will be called. However, dwc3 and its
parent device (like the power domain or glue driver) may already be
suspended by runtime PM in fact. If this sutiation happened, the
pm_runtime_set_active() in dwc3_resume() will return an error since
parent device was suspended. This can lead to unexpected behavior if
DWC3 proceeds to execute dwc3_resume_common().
EX.
RPM suspend: ... -> dwc3_runtime_suspend()
-> rpm_suspend() of parent device
...
PM suspend: ... -> dwc3_suspend() -> pm_suspend of parent device
^ interrupt, so resume suspended device
... <- dwc3_resume() <-/
^ pm_runtime_set_active() returns error
To prevent the problem, this commit will skip dwc3_resume_common() and
return the error if pm_runtime_set_active() fails.
Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable <stable@kernel.org>
Signed-off-by: Ray Chi <raychi@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250106082240.3822059-1-raychi@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66e0ea341a2a78d14336117f19763bd9be26d45d upstream.
Currently, DWC3 driver attempts to acquire the USB power supply only
once during the probe. If the USB power supply is not ready at that
time, the driver simply ignores the failure and continues the probe,
leading to permanent non-functioning of the gadget vbus_draw callback.
Address this problem by delaying the dwc3 driver initialization until
the USB power supply is registered.
Fixes: 6f0764b5adea ("usb: dwc3: add a power supply for current control")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250115044548.2701138-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a266462b937beba065e934a563efe13dd246a164 upstream.
phy_syscon_pll_refclk() leaks an OF node obtained by
of_parse_phandle_with_fixed_args(), thus add an of_node_put() call.
Cc: stable <stable@kernel.org>
Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250109001638.70033-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b997089903b909684114aca6f79d683e5c64a0e upstream.
Check to make sure that the GetInterface and SetInterface are for valid
interface. Return proper alternate setting number on GetInterface.
Fixes: 0b8b1a1fede0 ("usb: gadget: f_tcm: Provide support to get alternate setting in tcm function")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ffd91b4640945ea4d3b4f4091cf1abbdbd9cf4fc.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream.
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit
00d8521dcd23 ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code")
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e0a19912adb68a4b2b74fd77001c96cd83eb073 upstream.
If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.
If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.
Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.
This is probably Bug 219532, but no confirmation has been received.
The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532
Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241227120142.1035206-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90b7f2961798793275b4844348619b622f983907 upstream.
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware.
Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd5fc653381811f1e0ba65f5d169918cab61476f upstream.
There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:
┌────────────────────────────────────────────────────────────┐
│chunk 0 │
│ ┌────────────┬─────────────┬─────────────┬────────────┼
│ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1 │
│ ┌────────────┬─────────────┬─────────────┬────────────┤
│ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘
Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
- 3 times (0 + 4k), for (A0, A1 and A2)
- 3 times (4 + 4k), for (B0, B1 and B2)
- 3 times (8 + 4k), for (C0, C1 and C3)
- 3 times (12 + 4k), for (D0, D1 and D3)
After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.
Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:
- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;
Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.
Also remove STRIPE_BITMAP_PENDING since it's not used anymore.
[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c89f604476cf15c31fbbdb043cff7fbf1dbe0cb upstream.
Bitmap is used for the whole array for raid1/raid10, hence IO for the
array can be used directly for bitmap. However, bitmap is used for
underlying disks for raid5, hence IO for the array can't be used
directly for bitmap.
Implement pers->bitmap_sector() for raid5 to convert IO ranges from the
array to the underlying disks.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-5-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c984a283a3ea3f10bebecd6c57c1d41b2e4f518 upstream.
This callback will be used in raid5 to convert io ranges from array to
bitmap.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20250109015145.158868-4-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f0e7d0e03b7b80af84759a9e7cfb0f81ac4adae upstream.
For the case that IO failed for one rdev, the bit will be mark as NEEDED
in following cases:
1) If badblocks is set and rdev is not faulty;
2) If rdev is faulty;
Case 1) is useless because synchronize data to badblocks make no sense.
Case 2) can be replaced with mddev->degraded.
Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since
case 2) no longer use them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08c50142a128dcb2d7060aa3b4c5db8837f7a46a upstream.
behind_write is only used in raid1, prepare to refactor
bitmap_{start/end}write(), there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b95102215a8d0987789715ce11c0d4ec031cbfbe ]
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Fixes: b71af04676e9 ("sh_eth: add more PM methods")
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c2ebb2b49573e5f8726112ad06b1dffc3c9ea03 ]
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Without this fix, the following warning is triggered:
[ 39.032969] =============================
[ 39.032983] WARNING: suspicious RCU usage
[ 39.033019] -----------------------------
[ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious
rcu_dereference_protected() usage!
...
[ 39.033597] stack backtrace:
[ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted
6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7
[ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on
r9a08g045s33 (DT)
[ 39.033628] Call trace:
[ 39.033633] show_stack+0x14/0x1c (C)
[ 39.033652] dump_stack_lvl+0xb4/0xc4
[ 39.033664] dump_stack+0x14/0x1c
[ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c
[ 39.033682] phy_detach+0x160/0x190
[ 39.033694] phy_disconnect+0x40/0x54
[ 39.033703] ravb_close+0x6c/0x1cc
[ 39.033714] ravb_suspend+0x48/0x120
[ 39.033721] dpm_run_callback+0x4c/0x14c
[ 39.033731] device_suspend+0x11c/0x4dc
[ 39.033740] dpm_suspend+0xdc/0x214
[ 39.033748] dpm_suspend_start+0x48/0x60
[ 39.033758] suspend_devices_and_enter+0x124/0x574
[ 39.033769] pm_suspend+0x1ac/0x274
[ 39.033778] state_store+0x88/0x124
[ 39.033788] kobj_attr_store+0x14/0x24
[ 39.033798] sysfs_kf_write+0x48/0x6c
[ 39.033808] kernfs_fop_write_iter+0x118/0x1a8
[ 39.033817] vfs_write+0x27c/0x378
[ 39.033825] ksys_write+0x64/0xf4
[ 39.033833] __arm64_sys_write+0x18/0x20
[ 39.033841] invoke_syscall+0x44/0x104
[ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4
[ 39.033862] do_el0_svc+0x18/0x20
[ 39.033870] el0_svc+0x3c/0xf0
[ 39.033880] el0t_64_sync_handler+0xc0/0xc4
[ 39.033888] el0t_64_sync+0x154/0x158
[ 39.041274] ravb 11c30000.ethernet eth0: Link is Down
Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 752e5fcc2e77358936d36ef8e522d6439372e201 ]
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
bgmac_open
-> bgmac_dma_init
-> bgmac_dma_rx_skb_for_slot
-> netdev_alloc_frag
BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768.
Eventually we land into __page_frag_alloc_align() with the following
parameters across multiple successive calls:
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7de119bb79a63f6a1959b83117a98734914fb0b0 ]
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9087e828827e5a5c85e124ce77503f2b81c3491 ]
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3bcc8a1af581af152d43e42b53db3534018301b5 ]
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e6c4e6b605c1fa3e24f74ee0b641e95f090188a ]
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ]
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f5fb35a3d6b36d378b2e2ecbfb9caa337d5428e6 ]
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19ae40f572a9ce1ade9954990af709a03fd37010 ]
Pointer arguments passed to ioctls need to pass through compat_ptr() to
work correctly on s390; as explained in Documentation/driver-api/ioctl.rst.
Detect compat mode at runtime and call compat_ptr() for those commands
which do take pointer arguments.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/1ba5d3a4-7931-455b-a3ce-85a968a7cb10@app.fastmail.com/
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250125-posix-clock-compat_ioctl-v2-1-11c865c500eb@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19e65c45a1507a1a2926649d2db3583ed9d55fd9 ]
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool.
Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5066293b9b7046a906eff60e3949a887ae185a43 ]
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1].
If the length of the netlink message payload is less than
sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes
beyond the message. This can lead to uninit-value access. Fix this by
returning an error in such situations.
[1]
BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786
netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317
__netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline]
rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882
netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4110 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205
kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196
netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250123145746.785768-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 979284535aaf12a287a2f43d9d5dfcbdc1dc4cac ]
kvzalloc_node is not doing a runtime check on the node argument
(__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to
nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink
operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES
triggers OOB access and panic (see the trace below).
Add missing cpu_to_node call to convert cpu id to node id.
[ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up
[ 166.479327] BUG: unable to handle page fault for address: 0000000800000010
[ 166.494592] #PF: supervisor read access in kernel mode
[ 166.505995] #PF: error_code(0x0000) - not-present page
...
[ 166.816958] Call Trace:
[ 166.822380] <TASK>
[ 166.827034] ? __die_body+0x64/0xb0
[ 166.834774] ? page_fault_oops+0x2cd/0x3f0
[ 166.843862] ? exc_page_fault+0x63/0x130
[ 166.852564] ? asm_exc_page_fault+0x22/0x30
[ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.871897] ? get_partial_node+0x1c/0x320
[ 166.880983] ? deactivate_slab+0x269/0x2b0
[ 166.890069] ___slab_alloc+0x521/0xa90
[ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.908442] __kmalloc_node_noprof+0x216/0x3f0
[ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.928354] __kvmalloc_node_noprof+0x43/0xd0
[ 166.938021] mlx5e_open_channels+0x5e2/0xc00
[ 166.947496] mlx5e_open_locked+0x3e/0xf0
[ 166.956201] mlx5e_open+0x23/0x50
[ 166.963551] __dev_open+0x114/0x1c0
[ 166.971292] __dev_change_flags+0xa2/0x1b0
[ 166.980378] dev_change_flags+0x21/0x60
[ 166.988887] do_setlink+0x38d/0xf20
[ 166.996628] ? ep_poll_callback+0x1b9/0x240
[ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70
[ 167.020782] ? __wake_up_sync_key+0x52/0x80
[ 167.030066] ? __mutex_lock+0xff/0x550
[ 167.038382] ? security_capable+0x50/0x90
[ 167.047279] rtnl_setlink+0x1c9/0x210
[ 167.055403] ? ep_poll_callback+0x1b9/0x240
[ 167.064684] ? security_capable+0x50/0x90
[ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310
[ 167.082667] ? rtnetlink_bind+0x30/0x30
[ 167.091173] netlink_rcv_skb+0xb1/0xe0
[ 167.099492] netlink_unicast+0x20f/0x2e0
[ 167.108191] netlink_sendmsg+0x389/0x420
[ 167.116896] __sys_sendto+0x158/0x1c0
[ 167.125024] __x64_sys_sendto+0x22/0x30
[ 167.133534] do_syscall_64+0x63/0x130
[ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0
[ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: bb135e40129d ("net/mlx5e: move XDP_REDIRECT sq to dynamic allocation")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250123000407.3464715-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50bf398e1ceacb9a7f85bd3bdca065ebe5cb6159 ]
syzbot discovered that we remove the debugfs files after we free
the netdev. Try to clean up the relevant dir while the device
is still around.
Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com
Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee7d79433d783346430ee32f28c9df44a88b3bb6 ]
First case:
> ip l a l $VF name vlanx type vlan id 100
> ip l d vlanx
> ip l a l $VF name vlanx type vlan id 100
As workqueue can be execute after sometime, there is a window to have
call trace like that:
- iavf_del_vlan
- iavf_add_vlan
- iavf_del_vlans (wq)
It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE
to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state
won't be changed because VLAN 100 is on the filter list. The final
result is that the VLAN 100 filter isn't added in hardware (no
iavf_add_vlans call).
To fix that change the state if the filter wasn't removed yet directly
to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message
wasn't sent yet.
Second case:
> ip l a l $VF name vlanx type vlan id 100
Any type of VF reset ex. change trust
> ip l s $PF vf $VF_NUM trust on
> ip l d vlanx
> ip l a l $VF name vlanx type vlan id 100
In case of reset iavf driver is responsible for readding all filters
that are being used. To do that all VLAN filters state are changed to
IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from
kernel side, as workqueue isn't called immediately. We can have call
trace like that:
- changing to IAVF_VLAN_ADD (after reset)
- iavf_del_vlan (called from kernel ops)
- iavf_del_vlans (wq)
Not exsisitng VLAN filters will be removed from hardware. It isn't a
bug, ice driver will handle it fine. However, we can have call trace
like that:
- changing to IAVF_VLAN_ADD (after reset)
- iavf_del_vlan (called from kernel ops)
- iavf_add_vlan (called from kernel ops)
- iavf_del_vlans (wq)
With fix for previous case we end up with no VLAN filters in hardware.
We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete
VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message
wasn't sent yet.
Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5cc2a27e04f2fcd77c74ada9aef76a758a24697 ]
It occurred that in the commit 70838938e89c ("ice: Implement driver
functionality to dump serdes equalizer values") the invalid DRATE parameter
for reading has been added. The output of the command:
$ ethtool -d <ethX>
returns the garbage value in the place where DRATE value should be
stored.
Remove mentioned parameter to prevent return of corrupted data to
userspace.
Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values")
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18625e26fefced78f2ae28b25e80a07079821e04 ]
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20
in the initial impl commit (see Fixes tag). All usage code assumed it was
of size 20. That was also the initial size present up to v2 of the intro
series [2], but halved by v3 [3] refactor described as "Replace magic
hardcoded values with macros." The introducing series was so big that
some ugliness was unnoticed, same for bugs :/
ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one.
There was tmp variable @j in the scope of edited function, but was not
used in all places. This ugliness is now gone.
I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of
the holes in order to compensate for the added 10 bytes to the ::bst_key,
resulting in the same size of the whole as prior to the fix, and minimal
changes in the offsets of the fields.
Extend also the debug dump print of the key to cover all bytes. To not
have string with 20 "%02x" and 20 params, switch to
ice_debug_array_w_prefix().
This fix obsoletes Ahmed's attempt at [1].
[1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com
[2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com
[3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain
Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop")
CC: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5b021cb8186f1854bac2812bd4f396bb1e881c ]
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
Tested:
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d15fe4edd7decdf14d8ad2b78df100ea23302065 ]
The transaction salt was being accessed before acquiring the
idpf_vc_xn_lock when idpf has to forward the virtchnl reply.
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 137da75ba72593598898a4e79da34f4b2da5d151 ]
Restore the call to idpf_vc_xn_shutdown() at the beginning of
idpf_vc_core_deinit() provided the function is not called on remove.
In the reset path the mailbox is destroyed, leading to all transactions
timing out.
Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 396f0165672c6a74d7379027d344b83b5f05948c ]
Add read memory barrier to ensure the order of operations when accessing
control queue descriptors. Specifically, we want to avoid cases where loads
can be reordered:
1. Load #1 is dispatched to read descriptor flags.
2. Load #2 is dispatched to read some other field from the descriptor.
3. Load #2 completes, accessing memory/cache at a point in time when the DD
flag is zero.
4. NIC DMA overwrites the descriptor, now the DD flag is one.
5. Any fields loaded before step 4 are now inconsistent with the actual
descriptor state.
Add read memory barrier between steps 1 and 2, so that load #2 is not
executed until load #1 has completed.
Fixes: 8077c727561a ("idpf: add controlq init and reset checks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Suggested-by: Lance Richardson <rlance@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61dc1fd9205bc9d9918aa933a847b08e80b4dc20 ]
Implement cleanup of descriptors in the TSO error path of
fec_enet_txq_submit_tso(). The cleanup
- Unmaps DMA buffers for data descriptors skipping TSO header
- Clears all buffer descriptors
- Handles extended descriptors by clearing cbd_esc when enabled
Fixes: 79f339125ea3 ("net: fec: Add software TSO support")
Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250120085430.99318-1-dheeraj.linuxdev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a197004cf3c2e6c8cc0695c787a97e62e3229754 ]
When using temperature measurement on Marvell 88Q2XXX devices and the
reset-gpios property is set in DT, the device does a hardware reset when
interface is brought down and up again. That means that the content of
the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that
leads to permanent deactivation of the temperature measurement, because
activation is done in mv88q2xxx_probe. To fix this move activation of
temperature measurement to mv88q222x_config_init.
Fixes: a557a92e6881 ("net: phy: marvell-88q2xxx: add support for temperature sensor")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250118-marvell-88q2xxx-fix-hwmon-v2-1-402e62ba2dcb@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b049e7abe9001a780d58e78e3833dcceee22f396 ]
struct platform_device::id was only set by board code, but since i.MX
became a devicetree-only platform, this will always be -1
(PLATFORM_DEVID_NONE).
Note: of_alias_get_id() returns a negative number on error and base
treats all negative errors the same, so we need not add any additional
error handling.
Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250113-b4-imx-gpio-base-warning-v1-3-0a28731a5cf6@pengutronix.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
