| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit a826e53fd78c7f07b8ff83446c44b227b2181920 ]
Modify the call to devm_clk_hw_register_gate_parent_data() to actually
pass the clk flags from hw.init instead of just 0. This is necessary to
allow individual clk gates to specify their own clk flags.
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20250113-th1520-clk_ignore_unused-v1-1-0b08fb813438@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 830d8062d25581cf0beaa334486eea06834044da ]
Ralink SoC RT3883 has already 'xtal' defined as a base clock so there is no
need to redefine it again in fixed clocks section. Hence, remove the duplicate
one from there.
Fixes: d34db686a3d7 ("clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20250108093636.265033-1-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79f4b6934dbd7dd6741726ba004a15e25380b8cc ]
Smatch reported that we dereference the data pointer to calculate the
expected length before we check it's not NULL. While this is true (and
hence needs to be fixed), this will never happen because the data
pointer comes from struct iwl_rx_packet object which has the following
layout:
struct iwl_rx_packet {
__le32 len_n_flags;
struct iwl_cmd_header hdr;
u8 data[];
} __packed;
So, if the pointer to iwl_rx_packet is valid, data will be valid as
well.
Remove the NULL pointer check on 'data' to avoid confusing smatch.
Also remove the check from similar functions in the same flow that were
cargo cult copy-pasted.
Fixes: 4635e6eaa0fe ("wifi: iwlwifi: mvm: support new versions of the wowlan APIs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411210812.0eLaonw3-lkp@intel.com/
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241229164246.c8ce6e041e4b.I4dc19289e3f3807386768c846e08be3ea322cd15@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76260267ba26a6e513acefa5e7de1200fbeb5b5d ]
When handling TX_CMD notification, for mgmt frames tid is equal
to IWL_MAX_TID_COUNT, so with the current logic we'll count
that as MPDU, fix that.
Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241229164246.80b119bb5d08.I31b1e8ba25cce15819225e5ac80332e4eaa20c13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf704a7624f99eb2ffca1a16c69183e85544a613 ]
When iterating over the links of a vif, we need to make sure that the
pointer is valid (in other words - that the link exists) before
dereferncing it.
Use for_each_vif_active_link that also does the check.
Fixes: 2b7ee1a10a72 ("wifi: iwlwiif: mvm: handle the new BT notif")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241229164246.31d41f7d3eab.I7fb7036a0b187c1636b01970207259cb2327952c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80c2b651fe7fc82e1d1b3e4f9651095896a095f0 ]
This variable exists for the "common" (WiFi/BT) GUID, not the
WiFi-only GUID. Fix that by passing the GUID to the function.
A short-cut for the wifi-only version remains so not all code
must be updated.
However, rename the GUID defines to be clearer.
Fixes: 09b4c35d73a5 ("wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.89a5ad921b6d.Idae95a70ff69d2ba1b610e8eced826961ce7de98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f21b77cb556296116b1cce1d62295d13e35da574 ]
commit c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop
period") changes the behavior of mt7915_bss_info_changed() in mesh mode
when enable_beacon becomes false: it calls mt7915_mcu_add_bss_info(...,
false) and mt7915_mcu_add_sta(..., false) while the previous code
didn't. These sends mcu commands that apparently confuse the firmware.
This breaks scanning while in mesh mode on AsiaRF MT7916 DBDC-based cards:
scanning works but no mesh frames get sent afterwards and the firmware
seems to be hosed. It breaks on MT7916 DBDC but not on MT7915 DBDC.
Fixes: c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20240927085350.4594-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08fa656c91fd5fdf47ba393795b9c0d1e97539ed ]
This comparison should be >= instead of > to prevent an out of bounds
read and write.
Fixes: 9679ca7326e5 ("wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/84bf5dd2-2fe3-4410-a7af-ae841e41082a@stanley.mountain
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c8571eab11131cce6dcce76b3345c1524e074071 ]
The help text has the wrong module name mentioned, and the capitalisation
of the title is inconsistent.
Fixes: 7e1449cd15d1 ("hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20250110114737.64035-1-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba4bb0402c60e945c4c396c51f0acac3c3e3ea5c ]
The rtwdev->scanning flag isn't protected by mutex originally, so
cancel_hw_scan can pass the condition, but suddenly hw_scan completion
unset the flag and calls ieee80211_scan_completed() that will free
local->hw_scan_req. Then, cancel_hw_scan raises null-ptr-deref and
use-after-free. Fix it by moving the check condition to where
protected by mutex.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 2 PID: 6922 Comm: kworker/2:2 Tainted: G OE
Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB6WW (2.76 ) 09/10/2019
Workqueue: events cfg80211_conn_work [cfg80211]
RIP: 0010:rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core]
Code: 00 45 89 6c 24 1c 0f 85 23 01 00 00 48 8b 85 20 ff ff ff 48 8d
RSP: 0018:ffff88811fd9f068 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88811fd9f258 RCX: 0000000000000001
RDX: 0000000000000011 RSI: 0000000000000001 RDI: 0000000000000089
RBP: ffff88811fd9f170 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88811fd9f108 R11: 0000000000000000 R12: ffff88810e47f960
R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8881d6f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007531dfca55b0 CR3: 00000001be296004 CR4: 00000000001706e0
Call Trace:
<TASK>
? show_regs+0x61/0x73
? __die_body+0x20/0x73
? die_addr+0x4f/0x7b
? exc_general_protection+0x191/0x1db
? asm_exc_general_protection+0x27/0x30
? rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core]
? rtw89_fw_h2c_scan_offload_be+0x458/0x13c3 [rtw89_core]
? __pfx_rtw89_fw_h2c_scan_offload_be+0x10/0x10 [rtw89_core]
? do_raw_spin_lock+0x75/0xdb
? __pfx_do_raw_spin_lock+0x10/0x10
rtw89_hw_scan_offload+0xb5e/0xbf7 [rtw89_core]
? _raw_spin_unlock+0xe/0x24
? __mutex_lock.constprop.0+0x40c/0x471
? __pfx_rtw89_hw_scan_offload+0x10/0x10 [rtw89_core]
? __mutex_lock_slowpath+0x13/0x1f
? mutex_lock+0xa2/0xdc
? __pfx_mutex_lock+0x10/0x10
rtw89_hw_scan_abort+0x58/0xb7 [rtw89_core]
rtw89_ops_cancel_hw_scan+0x120/0x13b [rtw89_core]
ieee80211_scan_cancel+0x468/0x4d0 [mac80211]
ieee80211_prep_connection+0x858/0x899 [mac80211]
ieee80211_mgd_auth+0xbea/0xdde [mac80211]
? __pfx_ieee80211_mgd_auth+0x10/0x10 [mac80211]
? cfg80211_find_elem+0x15/0x29 [cfg80211]
? is_bss+0x1b7/0x1d7 [cfg80211]
ieee80211_auth+0x18/0x27 [mac80211]
cfg80211_mlme_auth+0x3bb/0x3e7 [cfg80211]
cfg80211_conn_do_work+0x410/0xb81 [cfg80211]
? __pfx_cfg80211_conn_do_work+0x10/0x10 [cfg80211]
? __kasan_check_read+0x11/0x1f
? psi_group_change+0x8bc/0x944
? __kasan_check_write+0x14/0x22
? mutex_lock+0x8e/0xdc
? __pfx_mutex_lock+0x10/0x10
? __pfx___radix_tree_lookup+0x10/0x10
cfg80211_conn_work+0x245/0x34d [cfg80211]
? __pfx_cfg80211_conn_work+0x10/0x10 [cfg80211]
? update_cfs_rq_load_avg+0x3bc/0x3d7
? sched_clock_noinstr+0x9/0x1a
? sched_clock+0x10/0x24
? sched_clock_cpu+0x7e/0x42e
? newidle_balance+0x796/0x937
? __pfx_sched_clock_cpu+0x10/0x10
? __pfx_newidle_balance+0x10/0x10
? __kasan_check_read+0x11/0x1f
? psi_group_change+0x8bc/0x944
? _raw_spin_unlock+0xe/0x24
? raw_spin_rq_unlock+0x47/0x54
? raw_spin_rq_unlock_irq+0x9/0x1f
? finish_task_switch.isra.0+0x347/0x586
? __schedule+0x27bf/0x2892
? mutex_unlock+0x80/0xd0
? do_raw_spin_lock+0x75/0xdb
? __pfx___schedule+0x10/0x10
process_scheduled_works+0x58c/0x821
worker_thread+0x4c7/0x586
? __kasan_check_read+0x11/0x1f
kthread+0x285/0x294
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x6f
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 895907779752 ("rtw89: 8852a: add ieee80211_ops::hw_scan")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250107114254.6769-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35642ba31dc4a1816a20191e90156a9e329beb10 ]
For each MCC role, time limits, including max_tob_us, max_toa_us, and
mac_dur_us, are calculated if there are NoA attributes. The relation
between these time limits is "max_dur_us = max_tob_us + max_toa_us".
Then, the unit is converted from us to TU. However, originally, each
time limit was divided by 1024 independently. It missed to consider
the cases that max_tob_us or max_toa_us is not divisible by 1024. It
causes the result breaks "max_dur (TU) = max_tob (TU) + max_toa (TU)".
Finally, when MCC calculates pattern parameters based on these kinds
of time limits, it might not perform well.
Fixes: b09df09b55fb ("wifi: rtw89: mcc: initialize start flow")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103074412.124066-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f7667675df1b40b73ecc53b4b8c3189b1e5f2c1 ]
If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered
without removing the interface first. Then the mgnt_entry list init again,
causing the list_empty() check in rtw89_chanctx_ops_assign_vif()
useless, and list_add_tail() again. Therefore, we have added a check to
prevent double adding of the list.
rtw89_8852ce 0000:01:00.0: failed to check wow status disabled
rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready
rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw
rtw89_8852ce 0000:01:00.0: failed to disable wow
rtw89_8852ce 0000:01:00.0: failed to resume for wow -110
rtw89_8852ce 0000:01:00.0: MAC has already powered on
i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs
list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:34!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O
Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:__list_add_valid_or_report+0x9f/0xb0
Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ...
RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400
RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff
RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff
R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40
R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060
FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? die+0xaa/0xd0
? do_trap+0x9f/0x170
? __list_add_valid_or_report+0x9f/0xb0
? __list_add_valid_or_report+0x9f/0xb0
? handle_invalid_op+0x69/0x90
? __list_add_valid_or_report+0x9f/0xb0
? exc_invalid_op+0x3c/0x50
? asm_exc_invalid_op+0x16/0x20
? __list_add_valid_or_report+0x9f/0xb0
rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1]
? __mutex_unlock_slowpath+0xa0/0xf0
rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1]
drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6]
ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
? dev_printk_emit+0x51/0x70
? _dev_info+0x6e/0x90
wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
dpm_run_callback+0x37/0x1e0
device_resume+0x26d/0x4b0
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x29/0xd0
worker_thread+0x397/0x970
kthread+0xed/0x110
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x38/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 68ec751b2881 ("wifi: rtw89: chan: manage active interfaces")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103024500.14990-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2658bf4d7f2f2e37ae9d2463ecc40618f587834 ]
Header conversion should only be used with MLO connections. Otherwise
P2P connection fails due to wrong probe responses sent. Fix it
accordingly.
Fixes: b8499664fca9 ("wifi: rtw89: Add header conversion for MLO connections")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4790b3e314a4814f1680a5dc552031fb199b878 ]
During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process
which will re-order the list if an entry with target pattern is found.
And once one is found, should have aborted the list_for_each_entry. But,
`break` just aborted the inner for-loop. The outer list_for_each_entry
still continues. Normally, only the first entry will match the target
pattern, and the re-ordering will change nothing, so there won't be
soft lockup. However, in some special cases, soft lockup would happen.
Fix it by `goto fill` to break from the list_for_each_entry.
The following is a sample of kernel log for this problem.
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055]
[...]
RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core
[...]
Fixes: 68ec751b2881 ("wifi: rtw89: chan: manage active interfaces")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e47f0a5898540eb19b953708707887d4b3020645 ]
When starting/proceeding MCC, it will abort an ongoing hw scan process.
In the proceeding cases, it unexpectedly tries to abort a non-exist hw
scan process. Then, a trace shown at the bottom will happen. This problem
is caused by a previous commit which changed some call sequence inside
rtw89_hw_scan_complete() to fix some coex problems. These changes lead
to our scanning flag was not cleared when proceeding MCC. To keep the
fixes on coex, and resolve the problem here, re-consider the related
call sequence.
The known sequence requirements are listed below.
* the old sequence:
A. notify coex
B. clear scanning flag
C. proceed chanctx
C-1. set channel
C-2. proceed MCC
(the problem: A needs to be after C-1)
* the current sequence:
C. proceed chanctx
C-1. set channel
C-2. proceed MCC
A. notify coex
B. clear scanning flag
(the problem: C-2 needs to be after B)
So, now let hw scan caller pass a callback to proceed chanctx if needed.
Then, the new sequence will be like the below.
C-1. set channel
A. notify coex
B. clear scanning flag
C-2. proceed MCC
The following is the kernel log for the problem in current sequence.
rtw89_8852be 0000:04:00.0: rtw89_hw_scan_offload failed ret -110
------------[ cut here ]------------
[...]
CPU: 2 PID: 3991 Comm: kworker/u16:0 Tainted: G OE 6.6.17 #3
Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018
Workqueue: events_unbound wiphy_work_cancel [cfg80211]
RIP: 0010:ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
Code: 9c 24 d0 11 00 00 49 39 dd 0f 85 46 ff ff ff 4c 89 e7 e8 09 2d
RSP: 0018:ffffb27783643d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8a2280964bc0 RSI: 0000000000000000 RDI: ffff8a23df580900
RBP: ffffb27783643d88 R08: 0000000000000001 R09: 0000000000000400
R10: 0000000000000000 R11: 0000000000008268 R12: ffff8a23df580900
R13: ffff8a23df581b00 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8a258e680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f26a0654000 CR3: 000000002ea2e002 CR4: 00000000001706e0
Call Trace:
<TASK>
? show_regs+0x68/0x70
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
? __warn+0x8f/0x150
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
? report_bug+0x1f5/0x200
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
ieee80211_scan_work+0x14a/0x650 [mac80211]
? __queue_work+0x10f/0x410
wiphy_work_cancel+0x2fb/0x310 [cfg80211]
process_scheduled_works+0x9d/0x390
? __pfx_worker_thread+0x10/0x10
worker_thread+0x15b/0x2d0
? __pfx_worker_thread+0x10/0x10
kthread+0x108/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: f16c40acd319 ("wifi: rtw89: Fix TX fail with A2DP after scanning")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 996c934c8c196144af386c4385f61fcd5349af28 ]
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1be94490b6b8a06ff14cd23fda8714e6ec37cdfb ]
There is a specific error path in probe functions in wilc drivers (both
sdio and spi) which can lead to kernel panic, as this one for example
when using SPI:
Unable to handle kernel paging request at virtual address 9f000000 when read
[9f000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22
Hardware name: Atmel SAMA5
PC is at wiphy_unregister+0x244/0xc40 [cfg80211]
LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]
[...]
wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]
wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]
wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4
spi_probe from really_probe+0x270/0xb2c
really_probe from __driver_probe_device+0x1dc/0x4e8
__driver_probe_device from driver_probe_device+0x5c/0x140
driver_probe_device from __driver_attach+0x220/0x540
__driver_attach from bus_for_each_dev+0x13c/0x1a8
bus_for_each_dev from bus_add_driver+0x2a0/0x6a4
bus_add_driver from driver_register+0x27c/0x51c
driver_register from do_one_initcall+0xf8/0x564
do_one_initcall from do_init_module+0x2e4/0x82c
do_init_module from load_module+0x59a0/0x70c4
load_module from init_module_from_file+0x100/0x148
init_module_from_file from sys_finit_module+0x2fc/0x924
sys_finit_module from ret_fast_syscall+0x0/0x1c
The issue can easily be reproduced, for example by not wiring correctly
a wilc device through SPI (and so, make it unresponsive to early SPI
commands). It is due to a recent change decoupling wiphy allocation from
wiphy registration, however wilc_netdev_cleanup has not been updated
accordingly, letting it possibly call wiphy unregister on a wiphy which
has never been registered.
Fix this crash by moving wiphy_unregister/wiphy_free out of
wilc_netdev_cleanup, and by adjusting error paths in both drivers
Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89aca45f26879dfbbf8374c425c4811f69cfc2df ]
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface
combination is invalid, which will trigger the following warning trace
and get error returned from wiphy_register().
[ 10.080325] Call trace:
[ 10.082761] wiphy_register+0xc4/0x76c [cfg80211]
[ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211]
[ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76]
[ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e]
Fix this by removing unused adhoc iftype.
Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 805f7aaf7fee14a57b56af01d270edf6c10765e8 ]
It is possible for multiple, simultaneous callers calling
device_node_get_regmap() with the same node to fail to find an entry in
the syscon_list. There is a period of time while the first caller is
calling of_syscon_register() that subsequent callers also fail to find
an entry in the syscon_list and then call of_syscon_register() a second
time.
Fix this by keeping the lock held until after of_syscon_register()
completes and adds the node to syscon_list. Convert the spinlock to a
mutex as many of the functions called in of_syscon_register() such as
kzalloc() and of_clk_get() may sleep.
Fixes: bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-1-4f56d750541d@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 417cad5dc782096350e6a967ee5dd3417a19a24e ]
cht_wc_leds_probe() leaks memory when the second led_classdev_register()
call in the for-loop fails as it does not call the cleanup function
led_classdev_unregister() on the first device. Avoid this leak by
calling devm_led_classdev_register().
Fixes: 047da762b9a9 ("leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241220085346.533675-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80818fdc068eaab729bb793d790ae9fd053f7053 ]
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
check
[ Upstream commit 50420d7c79c37a3efe4010ff9b1bb14bc61ebccf ]
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the hid-thrustmaster driver[1].
There is a number of similar, already fixed issues [2].
In this case as in others, implementing check for endpoint type fixes the issue.
[1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470
[2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622
Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Tested-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f760a4bb5e927a133dcd75f7b69ccae2a331e42c ]
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb60a
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3540bba855b4b422e8b977d11aa8173ccb4f089d ]
Currently, when the vdev start WMI cmd is sent from host, vdev related
parameters such as max_reg_power, max_power, and max_antenna_gain are
multiplied by 2 before being sent to the firmware. This is incorrect
because the firmware uses 1 dBm steps for power calculations.
This leads to incorrect power values being used in the firmware and
radio, potentially causing incorrect behavior.
Fix the update of max_reg_power, max_power, and max_antenna_gain values
in the ath12k_mac_vdev_start_restart function, ensuring accurate
power settings in the firmware by sending these values as-is,
without multiplication.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Santhosh Ramesh <quic_santrame@quicinc.com>
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240909073049.3423035-1-quic_santrame@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83d8c79aa958e37724ed9c14dc7d0f66a48ad864 ]
Cosmo found that when there is a new request comes in while BMC is
ready for a response, the complete_response(), which is called to
complete the pending response, would accidentally clear out that new
request and force ssif_bmc to move back to abort state again.
This commit is to address that issue.
Fixes: dd2bc5cc9e25 ("ipmi: ssif_bmc: Add SSIF BMC driver")
Reported-by: Cosmo Chou <chou.cosmo@gmail.com>
Closes: https://lore.kernel.org/lkml/20250101165431.2113407-1-chou.cosmo@gmail.com/
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Message-ID: <20250107034734.1842247-1-quan@os.amperecomputing.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d38eb7f7b26261a0b642f6e0923269c7c000a97 ]
_opp_add_static_v2() leaks the obtained OF node reference when
_of_opp_alloc_required_opps() fails. Add an of_node_put() call in the
error path.
Fixes: 3466ea2cd6b6 ("OPP: Don't drop opp->np reference while it is still in use")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be482f1d10da781db9445d2753c1e3f1fd82babf ]
When bit offset for HWS_SET32 macro is negative,
UBSAN complains about the shift-out-of-bounds:
UBSAN: shift-out-of-bounds in
drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2
shift exponent -8 is negative
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dddca3b2fc676113c58b04aaefe84bfb958ac83e ]
of_regulator_match() does not release the OF node reference in the error
path, resulting in an OF node leak. Therefore, call of_node_put() on the
obtained nodes before returning the EINVAL error.
Since it is possible that some drivers call this function and do not
exit on failure, such as s2mps11_pmic_driver, clear the init_data and
of_node in the error path.
This was reported by an experimental verification tool that I am
developing. As I do not have access to actual devices nor the QEMU board
configuration to test drivers that call this function, no runtime test
was able to be performed.
Fixes: 1c8fa58f4750 ("regulator: Add generic DT parsing for regulators")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 383ca7bee8a93be9ff5a072936981c2710d2856b ]
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.
Partially revert commit ca1170b69968 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.
The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.
I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.
Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd604ae6c261c5a56bb977ae99f875bbd7264a3f ]
commit 50a062a76200 ("cpufreq/amd-pstate: Store the boost numerator as
highest perf again") updated the value stored for highest perf to no longer
store the highest perf value but instead the boost numerator.
This is a fixed value for systems with preferred cores and not appropriate
for use ITMT rankings. Update the value used for ITMT rankings to be the
preferred core ranking.
Reported-and-tested-by: Sebastian <sobrus@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219640
Fixes: 50a062a76200 ("cpufreq/amd-pstate: Store the boost numerator as highest perf again")
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Link: https://lore.kernel.org/r/20250102141204.3413202-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3fff5da4ca2164bb4d0f1e6cd33f6eb8a0e73e50 ]
Prevent adding a device which is already a team device lower,
e.g. adding veth0 if vlan1 was already added and veth0 is a lower of
vlan1.
This is not useful in practice and can lead to recursive locking:
$ ip link add veth0 type veth peer name veth1
$ ip link set veth0 up
$ ip link set veth1 up
$ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1
$ ip link add team0 type team
$ ip link set veth0.1 down
$ ip link set veth0.1 master team0
team0: Port device veth0.1 added
$ ip link set veth0 down
$ ip link set veth0 master team0
============================================
WARNING: possible recursive locking detected
6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted
--------------------------------------------
ip/7684 is trying to acquire lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
but task is already holding lock:
ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977)
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(team->team_lock_key);
lock(team->team_lock_key);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by ip/7684:
stack backtrace:
CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_deadlock_bug.cold (kernel/locking/lockdep.c:3040)
__lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226)
? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548)
lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2))
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? lock_acquire (kernel/locking/lockdep.c:5822)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
__mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
? fib_sync_up (net/ipv4/fib_semantics.c:2167)
? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
__dev_notify_flags (net/core/dev.c:8993)
? __dev_change_flags (net/core/dev.c:8975)
dev_change_flags (net/core/dev.c:9027)
vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470)
? br_device_event (net/bridge/br.c:143)
notifier_call_chain (kernel/notifier.c:85)
call_netdevice_notifiers_info (net/core/dev.c:1996)
dev_open (net/core/dev.c:1519 net/core/dev.c:1505)
team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977)
? __pfx_team_add_slave (drivers/net/team/team_core.c:1972)
do_set_master (net/core/rtnetlink.c:2917)
do_setlink.isra.0 (net/core/rtnetlink.c:3117)
Reported-by: syzbot+3c47b5843403a45aef57@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3c47b5843403a45aef57
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
subordinate GDSCs
[ Upstream commit d9377941f2732d2f6f53ec9520321a19c687717a ]
The Titan TOP GDSC is the parent GDSC for all other GDSCs in the CAMCC
block. None of the subordinate blocks will switch on without the parent
GDSC switched on.
Fixes: 76126a5129b5 ("clk: qcom: Add camcc clock driver for x1e80100")
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-12-16-titan-top-gdsc-v1-1-c96ef62fc307@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48806be086360846bb308c5ee21fcab8405a3da7 ]
Enable the LVDS gate, MIPI DSI, PXP, FLEXIO and MU only for i.MX93,
because i.MX91 does not support them.
Update enet clk entry format to align with others.
Fixes: a27bfff88dd2 ("clk: imx: add i.MX91 clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241225001443.883131-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a7853544482e2336b5b8bb9a4b964f9d687f290 ]
Split IMX93_CLK_SPDIF_IPG from IMX93_CLK_SPDIF_GATE
because the IMX93_CLK_SPDIF_GATE controls the gate
of IPG clock and root clock. Without this change,
disabling IMX93_CLK_SPDIF_GATE would also disable
the IPG clock, causing register access failures.
Fixes: 1c4a4f7362fd ("arm64: dts: imx93: Add audio device nodes")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241119015805.3840606-3-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9b7c84d22fb1687d63ca2a386773015cf59436b ]
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b59e ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9ba290d0b829012574b6821ba08815046e60c94 ]
determine_rate() callback is used by the clk_set_rate() API to get the
closest rate of the target rate supported by the clock. If this callback
is not implemented (nor round_rate() callback), then the API will assume
that the clock cannot set the requested rate. And since there is no parent,
it will return -EINVAL.
This is not an issue right now as clk_set_rate() mistakenly compares the
target rate with cached rate and bails out early. But once that is fixed
to compare the target rate with the actual rate of the clock (returned by
recalc_rate()), then clk_set_rate() for this clock will start to fail as
below:
cpu cpu0: _opp_config_clk_single: failed to set clock rate: -22
So implement the determine_rate() callback that just returns the actual
rate at which the clock is passed to the CPUs in a domain.
Fixes: 4370232c727b ("cpufreq: qcom-hw: Add CPU clock provider support")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
not available
[ Upstream commit 85d8b11351a8f15d6ec7a5e97909861cb3b6bcec ]
Currently, qcom_cpufreq_hw_recalc_rate() returns the LMh throttled
frequency for the domain even if LMh IRQ is not available. But as per
qcom_cpufreq_hw_get(), the driver has to query LUT entries to get the
actual frequency of the domain. So do the same in
qcom_cpufreq_hw_recalc_rate().
While doing so, refactor the existing qcom_cpufreq_hw_get() function so
that qcom_cpufreq_hw_recalc_rate() can make use of the existing code and
avoid code duplication. This also requires setting the
qcom_cpufreq_data::policy even if LMh IRQ is not available.
Fixes: 4370232c727b ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cef813a91c468253c80633891393478b9f2c966 ]
When the dirver fails getting this GPIO, it fails silently. Log an error
message to make debugging a lot easier by just reading dmesg.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: 054ccdef8b28 ("gpio: pca953x: Add optional reset gpio control")
Link: https://lore.kernel.org/r/20241219-pca953x-log-no-reset-gpio-v1-1-9aa7bcc45ead@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c7469ee718e1dd929f52bfb142a7f6fb68f0765 ]
Do not run napi_disable() if airoha_hw_init() fails since Tx/Rx napi
has not been started yet. In order to fix the issue, introduce
airoha_qdma_stop_napi routine and remove napi_disable in
airoha_hw_cleanup().
Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20241216-airoha_probe-error-path-fix-v2-1-6b10e04e9a5c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a126061c80d5efb4baef4bcf346094139cd81df6 ]
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page()
to increase test coverage.
syzbot found a splat caused by hard irq blocking in
ptr_ring_resize_multiple() [1]
As current users of ptr_ring_resize_multiple() do not require
hard irqs being masked, replace it to only block BH.
Rename helpers to better reflect they are safe against BH only.
- ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh()
- skb_array_resize_multiple() to skb_array_resize_multiple_bh()
[1]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Modules linked in:
CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline]
RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85
RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083
RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843
RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d
R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040
R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff
FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tun_ptr_free drivers/net/tun.c:617 [inline]
__ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline]
ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline]
tun_queue_resize drivers/net/tun.c:3694 [inline]
tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024
do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923
rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201
rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550
Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq")
Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cce16e7f6216227964cda25f5f23634bce2c500f ]
Add check for the return value of clk_enable() to catch the potential
error.
We used APP-Miner to find it.
Fixes: e70a540b4e02 ("pwm: Add STM32 LPTimer PWM driver")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20241206215318.3402860-1-zmw12306@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0508316be63bb735f59bdc8fe4527cadb62210ca ]
netxbig_leds_get_of_pdata() does not release the OF node obtained by
of_parse_phandle() when of_find_device_by_node() fails. Add an
of_node_put() call to fix the leak.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 9af512e81964 ("leds: netxbig: Convert to use GPIO descriptors")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241216074923.628509-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c759bc8e9046f9812238f506d70f07d3ea4206d4 ]
Call thermal_cooling_device_unregister() and sysfs_remove_link() in the
error path of acpi_fan_probe() to fix possible memory leak.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 05a83d972293 ("ACPI: register ACPI Fan as generic thermal cooling device")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241211032812.210164-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2505f87eb3af55f3dd7f57d7cb7783b94b52a2d9 ]
DEFAULT_SYMBOL_NAMESPACE must already be defined when <linux/export.h>
is included. So move the define above the include block.
Fixes: c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b05d30c2b6df7e2172b18bf1baee9b202f9c6b53 ]
Including the fwil.h header file can lead to a build error:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h: \
In function ‘brcmf_fil_cmd_int_set’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.h:90:9: error: implicit \
declaration of function ‘brcmf_dbg’ [-Werror=implicit-function-declaration]
90 | brcmf_dbg(FIL, "ifidx=%d, cmd=%d, value=%d\n", ifp->ifidx, cmd, data);
| ^~~~~~~~~
The error is often avoided because the debug.h header file is included
before the fwil.h header file.
This makes sure the header include order is irrelevant by explicitly adding the
debug.h header.
Fixes: 31343230abb1 ("wifi: brcmfmac: export firmware interface functions")
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241211133618.2014083-1-marcel.hamer@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a10971c7645a95f5d5dc23c26fbac4bf61801d0 ]
In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different
radio, it gets deleted from that radio through a call to
ath12k_mac_unassign_link_vif(). This action frees the arvif pointer.
Subsequently, there is a check involving arvif, which will result in a
read-after-free scenario.
Fix this by moving this check after arvif is again assigned via call to
ath12k_mac_assign_link_vif().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1636423
Fixes: b5068bc9180d ("wifi: ath12k: Cache vdev configs before vdev create")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210-read_after_free-v1-1-969f69c7d66c@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ade5e05bd094485ce370fad66a6a3fb6f50bfbc ]
Commit c8000deb68365b ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68365b ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b59b86c5d08be7d761c04affcbcec8184738c200 ]
At probe error path, the firmware loading work may have already been
queued. In such a case, it will try to access memory allocated by the probe
function, which is about to be released. In such paths, wait for the
firmware worker to finish before releasing memory.
Fixes: 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-5-cascardo@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7ceefbfd8d447abc8aca8ab993a942803522c06 ]
Deinitialize at reverse order when probe fails.
When init_sw_vars fails, rtl_deinit_core should not be called, specially
now that it destroys the rtl_wq workqueue.
And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be
leaked.
Remove pci_set_drvdata call as it will already be cleaned up by the core
driver code and could lead to memory leaks too. cf. commit 8d450935ae7f
("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and
commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory").
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-4-cascardo@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8ece6fc3694657e4886191b32ca1690af11adda ]
rtl_wq is allocated at rtl_init_core, so it makes more sense to destroy it
at rtl_deinit_core. In the case of USB, where _rtl_usb_init does not
require anything to be undone, that is fine. But for PCI, rtl_pci_init,
which is called after rtl_init_core, needs to deallocate data, but only if
it has been called.
That means that destroying the workqueue needs to be done whether
rtl_pci_init has been called or not. And since rtl_pci_deinit was doing it,
it has to be moved out of there.
It makes more sense to move it to rtl_deinit_core and have it done in both
cases, USB and PCI.
Since this is a requirement for a followup memory leak fix, mark this as
fixing such memory leak.
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241206173713.3222187-3-cascardo@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
