summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-09-08drm/amd/display: Fix Coverity INTEGER_OVERFLOW within dal_gpio_service_createHersen Wu
[ Upstream commit c6077aa66fa230d12f37fef01161ef080d13b726 ] [Why] For subtraction, coverity reports integer overflow warning message when variable type is uint32_t. [How] Change variable type to int32_t. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Check msg_id before processing transcationAlex Hung
[ Upstream commit fa71face755e27dc44bc296416ebdf2c67163316 ] [WHY & HOW] HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid array index, and it needs checking before used. This fixes 4 OVERRUN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Check num_valid_sets before accessing reader_wm_sets[]Alex Hung
[ Upstream commit b38a4815f79b87efb196cd5121579fc51e29a7fb ] [WHY & HOW] num_valid_sets needs to be checked to avoid a negative index when accessing reader_wm_sets[num_valid_sets - 1]. This fixes an OVERRUN issue reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Add array index check for hdcp ddc accessHersen Wu
[ Upstream commit 4e70c0f5251c25885c31ee84a31f99a01f7cf50e ] [Why] Coverity reports OVERRUN warning. Do not check if array index valid. [How] Check msg_id valid and valid array index. Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Stop amdgpu_dm initialize when stream nums greater than 6Hersen Wu
[ Upstream commit 84723eb6068c50610c5c0893980d230d7afa2105 ] [Why] Coverity reports OVERRUN warning. Should abort amdgpu_dm initialize. [How] Return failure to amdgpu_dm_init. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Check gpio_id before used as array indexAlex Hung
[ Upstream commit 2a5626eeb3b5eec7a36886f9556113dd93ec8ed6 ] [WHY & HOW] GPIO_ID_UNKNOWN (-1) is not a valid value for array index and therefore should be checked in advance. This fixes 5 OVERRUN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amdgpu: avoid reading vf2pf info size from FBZhigang Luo
[ Upstream commit 3bcc0ee14768d886cedff65da72d83d375a31a56 ] VF can't access FB when host is doing mode1 reset. Using sizeof to get vf2pf info size, instead of reading it from vf2pf header stored in FB. Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: fix uninitialized variable warnings for vega10_hwmgrTim Huang
[ Upstream commit 5fa7d540d95d97ddc021a74583f6b3da4df9c93a ] Clear warnings that using uninitialized variable when fails to get the valid value from SMU. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: fix the Out-of-bounds read warningJesse Zhang
[ Upstream commit 12c6967428a099bbba9dfd247bb4322a984fcc0b ] using index i - 1U may beyond element index for mc_data[] when i = 0. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: Fix negative array index readJesse Zhang
[ Upstream commit c8c19ebf7c0b202a6a2d37a52ca112432723db5f ] Avoid using the negative values for clk_idex as an index into an array pptable->DpmDescriptor. V2: fix clk_index return check (Tim Huang) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: fix warning using uninitialized value of max_vid_stepJesse Zhang
[ Upstream commit 17e3bea65cdc453695b2fe4ff26d25d17f5339e9 ] Check the return of pp_atomfwctrl_get_Voltage_table_v4 as it may fail to initialize max_vid_step V2: change the check condition (Tim Huang) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: fix uninitialized variable warning for smu8_hwmgrTim Huang
[ Upstream commit 86df36b934640866eb249a4488abb148b985a0d9 ] Clear warnings that using uninitialized value level when fails to get the value from SMU. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/pm: fix uninitialized variable warningJesse Zhang
[ Upstream commit 7c836905520703dbc8b938993b6d4d718bc739f3 ] Check the return of function smum_send_msg_to_smc as it may fail to initialize the variable. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amdgpu/pm: Check the return value of smum_send_msg_to_smcMa Jun
[ Upstream commit 579f0c21baec9e7506b6bb3f60f0a9b6d07693b4 ] Check the return value of smum_send_msg_to_smc, otherwise we might use an uninitialized variable "now" Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amdgpu: fix overflowed array index read warningTim Huang
[ Upstream commit ebbc2ada5c636a6a63d8316a3408753768f5aa9f ] Clear overflowed array index read warning by cast operation. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amd/display: Assign linear_pitch_alignment even for VMAlvin Lee
[ Upstream commit 984debc133efa05e62f5aa1a7a1dd8ca0ef041f4 ] [Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments Reviewed-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm/amdgpu: Fix uninitialized variable warning in amdgpu_afmt_acrMa Jun
[ Upstream commit c0d6bd3cd209419cc46ac49562bef1db65d90e70 ] Assign value to clock to fix the warning below: "Using uninitialized value res. Field res.clock is uninitialized" Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08PCI/MSI: Fix UAF in msi_capability_initMostafa Saleh
commit 9eee5330656bf92f51cb1f09b2dc9f8cf975b3d1 upstream. KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on cpu 7 at 10.808142s: __kmem_cache_alloc_node+0x1f0/0x2bc kmalloc_trace+0x44/0x138 msi_alloc_desc+0x3c/0x9c msi_domain_insert_msi_desc+0x30/0x78 msi_setup_msi_desc+0x13c/0x184 __pci_enable_msi_range+0x258/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 freed by task 81 on cpu 7 at 10.811436s: msi_domain_free_descs+0xd4/0x10c msi_domain_free_locked.part.0+0xc0/0x1d8 msi_domain_alloc_irqs_all_locked+0xb4/0xbc pci_msi_setup_msi_irqs+0x30/0x4c __pci_enable_msi_range+0x2a8/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 Descriptor allocation done in: __pci_enable_msi_range msi_capability_init msi_setup_msi_desc msi_insert_msi_desc msi_domain_insert_msi_desc msi_alloc_desc ... Freed in case of failure in __msi_domain_alloc_locked() __pci_enable_msi_range msi_capability_init pci_msi_setup_msi_irqs msi_domain_alloc_irqs_all_locked msi_domain_alloc_locked __msi_domain_alloc_locked => fails msi_domain_free_locked ... That failure propagates back to pci_msi_setup_msi_irqs() in msi_capability_init() which accesses the descriptor for unmasking in the error exit path. Cure it by copying the descriptor and using the copy for the error exit path unmask operation. [ tglx: Massaged change log ] Fixes: bf6e054e0e3f ("genirq/msi: Provide msi_device_populate/destroy_sysfs()") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Heelgas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240624203729.1094506-1-smostafa@google.com Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-08net: usb: qmi_wwan: add MeiG Smart SRM825LZHANG Yuntian
[ Upstream commit 1ca645a2f74a4290527ae27130c8611391b07dbf ] Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08scsi: ufs: core: Bypass quick recovery if force reset is neededPeter Wang
[ Upstream commit 022587d8aec3da1d1698ddae9fb8cfe35f3ad49c ] If force_reset is true, bypass quick recovery. This will shorten error recovery time. Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20240712094506.11284-1-peter.wang@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08drm: panel-orientation-quirks: Add quirk for OrangePi NeoPhilip Mueller
[ Upstream commit d60c429610a14560085d98fa6f4cdb43040ca8f0 ] This adds a DMI orientation quirk for the OrangePi Neo Linux Gaming Handheld. Signed-off-by: Philip Mueller <philm@manjaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240715045818.1019979-1-philm@manjaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04fbdev: offb: fix up missing cleanup.hGreg Kroah-Hartman
In commit 96ee5c5712ef ("fbdev: offb: replace of_node_put with __free(device_node)"), __free() was added, but not cleanup.h so it broke the build. Fix this up. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/4f4ac35e-e31c-4f67-b809-a5de4d4b273a@roeck-us.net Fixes: 96ee5c5712ef ("fbdev: offb: replace of_node_put with __free(device_node)") Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04scsi: aacraid: Fix double-free on probe failureBen Hutchings
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ] aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com> Link: https://bugs.debian.org/1075855 Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support") Signed-off-by: Ben Hutchings <benh@debian.org> Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04igc: Fix qbv tx latency by setting gtxoffsetFaizal Rahim
commit 6c3fc0b1c3d073bd6fc3bf43dbd0e64240537464 upstream. A large tx latency issue was discovered during testing when only QBV was enabled. The issue occurs because gtxoffset was not set when QBV is active, it was only set when launch time is active. The patch "igc: Correct the launchtime offset" only sets gtxoffset when the launchtime_enable field is set by the user. Enabling launchtime_enable ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as LaunchT in the SW user manual). Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states: "The latency between transmission scheduling (launch time) and the time the packet is transmitted to the network is listed in Table 7-61." However, the patch misinterprets the phrase "launch time" in that section by assuming it specifically refers to the LaunchT register, whereas it actually denotes the generic term for when a packet is released from the internal buffer to the MAC transmit logic. This launch time, as per that section, also implicitly refers to the QBV gate open time, where a packet waits in the buffer for the QBV gate to open. Therefore, latency applies whenever QBV is in use. TSN features such as QBU and QAV reuse QBV, making the latency universal to TSN features. Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that the term "launch time" used in Section 7.5.2.6 is not clear and can be easily misinterpreted. Avi will update this section to: "When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission scheduling and the time the packet is transmitted to the network is listed in Table 7-61." Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to write to gtxoffset, aligning with the newly updated SW User Manual. Tested: 1. Enrol taprio on talker board base-time 0 cycle-time 1000000 flags 0x2 index 0 cmd S gatemask 0x1 interval1 index 0 cmd S gatemask 0x1 interval2 Note: interval1 = interval for a 64 bytes packet to go through interval2 = cycle-time - interval1 2. Take tcpdump on listener board 3. Use udp tai app on talker to send packets to listener 4. Check the timestamp on listener via wireshark Test Result: 100 Mbps: 113 ~193 ns 1000 Mbps: 52 ~ 84 ns 2500 Mbps: 95 ~ 223 ns Note that the test result is similar to the patch "igc: Correct the launchtime offset". Fixes: 790835fcc0cb ("igc: Correct the launchtime offset") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04igc: Fix reset adapter logics when tx mode changeFaizal Rahim
commit 0afeaeb5dae86aceded0d5f0c3a54d27858c0c6f upstream. Following the "igc: Fix TX Hang issue when QBV Gate is close" changes, remaining issues with the reset adapter logic in igc_tsn_offload_apply() have been observed: 1. The reset adapter logics for i225 and i226 differ, although they should be the same according to the guidelines in I225/6 HW Design Section 7.5.2.1 on software initialization during tx mode changes. 2. The i225 resets adapter every time, even though tx mode doesn't change. This occurs solely based on the condition igc_is_device_id_i225() when calling schedule_work(). 3. i226 doesn't reset adapter for tsn->legacy tx mode changes. It only resets adapter for legacy->tsn tx mode transitions. 4. qbv_count introduced in the patch is actually not needed; in this context, a non-zero value of qbv_count is used to indicate if tx mode was unconditionally set to tsn in igc_tsn_enable_offload(). This could be replaced by checking the existing register IGC_TQAVCTRL_TRANSMIT_MODE_TSN bit. This patch resolves all issues and enters schedule_work() to reset the adapter only when changing tx mode. It also removes reliance on qbv_count. qbv_count field will be removed in a future patch. Test ran: 1. Verify reset adapter behaviour in i225/6: a) Enrol a new GCL Reset adapter observed (tx mode change legacy->tsn) b) Enrol a new GCL without deleting qdisc No reset adapter observed (tx mode remain tsn->tsn) c) Delete qdisc Reset adapter observed (tx mode change tsn->legacy) 2. Tested scenario from "igc: Fix TX Hang issue when QBV Gate is closed" to confirm it remains resolved. Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> [ Only want the igc_tsn_is_tx_mode_in_tsn() portion of this for older stable kernels - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04phy: zynqmp: Enable reference clock correctlySean Anderson
commit 687d6bccb28238fcfa65f7c1badfdfeac498c428 upstream. Lanes can use other lanes' reference clocks, as determined by refclk. Use refclk to determine the clock to enable/disable instead of always using the lane's own reference clock. This ensures the clock selected in xpsgtr_configure_pll is the one enabled. For the other half of the equation, always program REF_CLK_SEL even when we are selecting the lane's own clock. This ensures that Linux's idea of the reference clock matches the hardware. We use the "local" clock mux for this instead of going through the ref clock network. Fixes: 25d700833513 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240628205540.3098010-2-sean.anderson@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: cdnsp: fix for Link TRB with TCPawel Laszczak
commit 740f2e2791b98e47288b3814c83a3f566518fed2 upstream. Stop Endpoint command on LINK TRB with TC bit set to 1 causes that internal cycle bit can have incorrect state after command complete. In consequence empty transfer ring can be incorrectly detected when EP is resumed. NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command is then on NOP TRB and internal cycle bit is not changed and have correct value. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq functionPawel Laszczak
commit 0497a356d3c498221eb0c1edc1e8985816092f12 upstream. Patch fixes the incorrect "stream_id" table index instead of "ep_index" used in cdnsp_get_hw_deq function. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB95381F2182688811D5C711CEDD8D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in ↵Zijun Hu
remove_power_attributes() commit 3a8839bbb86da7968a792123ed2296d063871a52 upstream. Device attribute group @usb3_hardware_lpm_attr_group is merged by add_power_attributes(), but it is not unmerged explicitly, fixed by unmerging it in remove_power_attributes(). Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: dwc3: st: add missing depopulate in probe error pathKrzysztof Kozlowski
commit cd4897bfd14f6a5388b21ba45a066541a0425199 upstream. Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: dwc3: st: fix probed platform device ref count on probe error pathKrzysztof Kozlowski
commit ddfcfeba891064b88bb844208b43bef2ef970f0c upstream. The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: dwc3: core: Prevent USB core invalid event buffer address accessSelvarasu Ganesan
commit 14e497183df28c006603cc67fd3797a537eef7b9 upstream. This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address. Cc: stable <stable@kernel.org> Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240815064836.1491-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04usb: dwc3: omap: add missing depopulate in probe error pathKrzysztof Kozlowski
commit 2aa765a43817ec8add990f83c8e54a9a5d87aa9c upstream. Depopulate device in probe error paths to fix leak of children resources. Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04USB: serial: option: add MeiG Smart SRM825LZHANG Yuntian
commit 9a471de516c35219d1722c13367191ce1f120fe9 upstream. Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://lore.kernel.org/0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI ControllerIan Ray
commit 0b00583ecacb0b51712a5ecd34cf7e6684307c67 upstream. USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which may be misinterpreted in the default N_TTY line discipline. Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Acked-by: Oliver Neuku <oneukum@suse.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240814072905.2501-1-ian.ray@gehealthcare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04soc: qcom: cmd-db: Map shared memory as WC, not WBVolodymyr Babchuk
commit f9bb896eab221618927ae6a2f1d566567999839d upstream. Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen. Fixes: 312416d9171a ("drivers: qcom: add command DB driver") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com> Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 WoA in EL2 Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20240718-cmd_db_uncached-v2-1-f6cf53164c90@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04nfc: pn533: Add poll mod list filling checkAleksandr Mishin
[ Upstream commit febccb39255f9df35527b88c953b2e0deae50e53 ] In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04drm/amd/display: avoid using null object of framebufferMa Ke
[ Upstream commit 3b9a33235c773c7a3768060cf1d2cf8a9153bc37 ] Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 73dd0ad9e5dad53766ea3e631303430116f834b3) Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04gtp: fix a potential NULL pointer dereferenceCong Wang
[ Upstream commit defd8b3c37b0f9cb3e0f60f47d3d78d459d57fda ] When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.) Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Cc: Andreas Schultz <aschultz@tpip.net> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bonding: implement xdo_dev_state_free and call it after deletionJianbo Liu
[ Upstream commit ec13009472f4a756288eb4e18e20a7845da98d10 ] Add this implementation for bonding, so hardware resources can be freed from the active slave after xfrm state is deleted. The netdev used to invoke xdo_dev_state_free callback, is saved in the xfrm state (xs->xso.real_dev), which is also the bond's active slave. To prevent it from being freed, acquire netdev reference before leaving RCU read-side critical section, and release it after callback is done. And call it when deleting all SAs from old active real interface while switching current active slave. Fixes: 9a5605505d9c ("bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04wifi: iwlwifi: fw: fix wgds rev 3 exact sizeAnjaneyulu
[ Upstream commit 3ee22f07a35b76939c5b8d17d6af292f5fafb509 ] Check size of WGDS revision 3 is equal to 8 entries size with some header, but doesn't depend on the number of used entries. Check that used entries are between min and max but allow more to be present than are used to fix operation with some BIOSes that have such data. Fixes: 97f8a3d1610b ("iwlwifi: ACPI: support revision 3 WGDS tables") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04iommu: Do not return 0 from map_pages if it doesn't do anythingJason Gunthorpe
[ Upstream commit 6093cd582f8e027117a8d4ad5d129a1aacdc53d2 ] These three implementations of map_pages() all succeed if a mapping is requested with no read or write. Since they return back to __iommu_map() leaving the mapped output as 0 it triggers an infinite loop. Therefore nothing is using no-access protection bits. Further, VFIO and iommufd rely on iommu_iova_to_phys() to get back PFNs stored by map, if iommu_map() succeeds but iommu_iova_to_phys() fails that will create serious bugs. Thus remove this never used "nothing to do" concept and just fail map immediately. Fixes: e5fc9753b1a8 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Fixes: e1d3c0fd701d ("iommu: add ARM LPAE page table allocator") Fixes: 745ef1092bcf ("iommu/io-pgtable: Move Apple DART support to its own file") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/2-v1-1211e1294c27+4b1-iommu_no_prot_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04dmaengine: dw: Add memory bus width verificationSerge Semin
[ Upstream commit d04b21bfa1c50a2ade4816cab6fdc91827b346b1 ] Currently in case of the DEV_TO_MEM or MEM_TO_DEV DMA transfers the memory data width (single transfer width) is determined based on the buffer length, buffer base address or DMA master-channel max address width capability. It isn't enough in case of the channel disabling prior the block transfer is finished. Here is what DW AHB DMA IP-core databook says regarding the port suspension (DMA-transfer pause) implementation in the controller: "When CTLx.SRC_TR_WIDTH < CTLx.DST_TR_WIDTH and the CFGx.CH_SUSP bit is high, the CFGx.FIFO_EMPTY is asserted once the contents of the FIFO do not permit a single word of CTLx.DST_TR_WIDTH to be formed. However, there may still be data in the channel FIFO, but not enough to form a single transfer of CTLx.DST_TR_WIDTH. In this scenario, once the channel is disabled, the remaining data in the channel FIFO is not transferred to the destination peripheral." So in case if the port gets to be suspended and then disabled it's possible to have the data silently discarded even though the controller reported that FIFO is empty and the CTLx.BLOCK_TS indicated the dropped data already received from the source device. This looks as if the data somehow got lost on a way from the peripheral device to memory and causes problems for instance in the DW APB UART driver, which pauses and disables the DMA-transfer as soon as the recv data timeout happens. Here is the way it looks: Memory <------- DMA FIFO <------ UART FIFO <---------------- UART DST_TR_WIDTH -+--------| | | | | | | No more data Current lvl -+--------| |---------+- DMA-burst lvl | | |---------+- Leftover data | | |---------+- SRC_TR_WIDTH -+--------+-------+---------+ In the example above: no more data is getting received over the UART port and BLOCK_TS is not even close to be fully received; some data is left in the UART FIFO, but not enough to perform a bursted DMA-xfer to the DMA FIFO; some data is left in the DMA FIFO, but not enough to be passed further to the system memory in a single transfer. In this situation the 8250 UART driver catches the recv timeout interrupt, pauses the DMA-transfer and terminates it completely, after which the IRQ handler manually fetches the leftover data from the UART FIFO into the recv-buffer. But since the DMA-channel has been disabled with the data left in the DMA FIFO, that data will be just discarded and the recv-buffer will have a gap of the "current lvl" size in the recv-buffer at the tail of the lately received data portion. So the data will be lost just due to the misconfigured DMA transfer. Note this is only relevant for the case of the transfer suspension and _disabling_. No problem will happen if the transfer will be re-enabled afterwards or the block transfer is fully completed. In the later case the "FIFO flush mode" will be executed at the transfer final stage in order to push out the data left in the DMA FIFO. In order to fix the denoted problem the DW AHB DMA-engine driver needs to make sure that the _bursted_ source transfer width is greater or equal to the single destination transfer (note the HW databook describes more strict constraint than actually required). Since the peripheral-device side is prescribed by the client driver logic, the memory-side can be only used for that. The solution can be easily implemented for the DEV_TO_MEM transfers just by adjusting the memory-channel address width. Sadly it's not that easy for the MEM_TO_DEV transfers since the mem-to-dma burst size is normally dynamically determined by the controller. So the only thing that can be done is to make sure that memory-side address width is greater than the peripheral device address width. Fixes: a09820043c9e ("dw_dmac: autoconfigure data_width or get it via platform data") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240802075100.6475-3-fancer.lancer@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04dmaengine: dw: Add peripheral bus width verificationSerge Semin
[ Upstream commit b336268dde75cb09bd795cb24893d52152a9191f ] Currently the src_addr_width and dst_addr_width fields of the dma_slave_config structure are mapped to the CTLx.SRC_TR_WIDTH and CTLx.DST_TR_WIDTH fields of the peripheral bus side in order to have the properly aligned data passed to the target device. It's done just by converting the passed peripheral bus width to the encoded value using the __ffs() function. This implementation has several problematic sides: 1. __ffs() is undefined if no bit exist in the passed value. Thus if the specified addr-width is DMA_SLAVE_BUSWIDTH_UNDEFINED, __ffs() may return unexpected value depending on the platform-specific implementation. 2. DW AHB DMA-engine permits having the power-of-2 transfer width limited by the DMAH_Mk_HDATA_WIDTH IP-core synthesize parameter. Specifying bus-width out of that constraints scope will definitely cause unexpected result since the destination reg will be only partly touched than the client driver implied. Let's fix all of that by adding the peripheral bus width verification method and calling it in dwc_config() which is supposed to be executed before preparing any transfer. The new method will make sure that the passed source or destination address width is valid and if undefined then the driver will just fallback to the 1-byte width transfer. Fixes: 029a40e97d0d ("dmaengine: dw: provide DMA capabilities") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240802075100.6475-2-fancer.lancer@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resumePiyush Mehta
[ Upstream commit 5af9b304bc6010723c02f74de0bfd24ff19b1a10 ] On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not happening after the resume. This is because serdes registers are reset when FPD is off (in suspend state) and needs to be reprogrammed in the resume path with the same default initialization as done in the first stage bootloader psu_init routine. To address the failure introduce a set of serdes registers to be saved in the suspend path and then restore it on resume. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04phy: xilinx: phy-zynqmp: dynamic clock support for power-savePiyush Mehta
[ Upstream commit 25d70083351318b44ae699d92c042dcb18a738ea ] Enabling clock for all the lanes consumes power even PHY is active or inactive. To resolve this, enable/disable clocks in phy_init/phy_exit. By default clock is disabled for all the lanes. Whenever phy_init called from USB, SATA, or display driver, etc. It enabled the required clock for requested lane. On phy_exit cycle, it disabled clock for the active PHYs. During the suspend/resume cycle, each USB/ SATA/ display driver called phy_exit/phy_init individually. It disabled clock on exit, and enabled on initialization for the active PHYs. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230613140250.3018947-3-piyush.mehta@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04phy: xilinx: add runtime PM supportPiyush Mehta
[ Upstream commit b3db66f624468ab4a0385586bc7f4221e477d6b2 ] Added Runtime power management support to the xilinx phy driver and using DEFINE_RUNTIME_DEV_PM_OPS new macros allows the compiler to remove the unused dev_pm_ops structure and related functions if !CONFIG_PM without the need to mark the functions __maybe_unused. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230613140250.3018947-2-piyush.mehta@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04soundwire: stream: fix programming slave ports for non-continous port mapsKrzysztof Kozlowski
commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 upstream. Two bitmasks in 'struct sdw_slave_prop' - 'source_ports' and 'sink_ports' - define which ports to program in sdw_program_slave_port_params(). The masks are used to get the appropriate data port properties ('struct sdw_get_slave_dpn_prop') from an array. Bitmasks can be non-continuous or can start from index different than 0, thus when looking for matching port property for given port, we must iterate over mask bits, not from 0 up to number of ports. This fixes allocation and programming slave ports, when a source or sink masks start from further index. Fixes: f8101c74aa54 ("soundwire: Add Master and Slave port programming") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240729140157.326450-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04pinctrl: mediatek: common-v2: Fix broken bias-disable for PULL_PU_PD_RSEL_TYPENícolas F. R. A. Prado
[ Upstream commit 166bf8af91225576f85208a31eaedbadd182d1ea ] Despite its name, commit fed74d75277d ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE") actually broke bias-disable for PULL_PU_PD_RSEL_TYPE. mtk_pinconf_bias_set_combo() tries every bias method supported by the pin until one succeeds. For PULL_PU_PD_RSEL_TYPE pins, before the breaking commit, mtk_pinconf_bias_set_rsel() would be called first to try and set the RSEL value (as well as PU and PD), and if that failed, the only other valid option was that bias-disable was specified, which would then be handled by calling mtk_pinconf_bias_set_pu_pd() and disabling both PU and PD. The breaking commit misunderstood this logic and added an early "return 0" in mtk_pinconf_bias_set_rsel(). The result was that in the bias-disable case, the bias was left unchanged, since by returning success, mtk_pinconf_bias_set_combo() no longer tried calling mtk_pinconf_bias_set_pu_pd() to disable the bias. Since the logic for configuring bias-disable on PULL_PU_PD_RSEL_TYPE pins required mtk_pinconf_bias_set_rsel() to fail first, in that case, an error was printed to the log, eg: mt8195-pinctrl 10005000.pinctrl: Not support rsel value 0 Ohm for pin = 29 (GPIO29) This is what the breaking commit actually got rid of, and likely part of the reason why that commit was thought to be fixing functionality, while in reality it was breaking it. Instead of simply reverting that commit, restore the functionality but in a way that avoids the error from being printed and makes the code less confusing: * Return 0 explicitly if a bias method was successful * Introduce an extra function mtk_pinconf_bias_set_pu_pd_rsel() that calls both mtk_pinconf_bias_set_rsel() (only if needed) and mtk_pinconf_bias_set_pu_pd() * And analogously for the corresponding getters Fixes: fed74d75277d ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/20240808-mtk-rsel-bias-disable-fix-v1-1-1b4e85bf596c@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04thermal: of: Fix OF node leak in of_thermal_zone_find() error pathsKrzysztof Kozlowski
[ Upstream commit c0a1ef9c5be72ff28a5413deb1b3e1a066593c13 ] Terminating for_each_available_child_of_node() loop requires dropping OF node reference, so bailing out on errors misses this. Solve the OF node reference leak with scoped for_each_available_child_of_node_scoped(). Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://patch.msgid.link/20240814195823.437597-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 23:41:31 +0000