summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-23ata: libata-core: Disable TRIM on M88V29Zoltán Böszörményi
[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23irqchip/sifive-plic: Add missing thead,c900-plic match stringGuo Ren
[ Upstream commit 1d4df649cbb4b26d19bea38ecff4b65b10a1bbca ] The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobjMiaoqian Lin
[ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23i2c: brcmstb: fix support for DSL and CM variantsRafał Miłecki
commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23dmaengine: sh: rcar-dmac: Check for error num after setting maskJiasheng Jiang
commit 2d21543efe332cd8c8f212fb7d365bc8b0690bfa upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23EDAC: Fix calculation of returned address and next offset in edac_align_ptr()Eliav Farber
commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loopJames Smart
commit 7f4c5a26f735dea4bbc0eb8eb9da99cda95a8563 upstream. When connected point to point, the driver does not know the FC4's supported by the other end. In Fabrics, it can query the nameserver. Thus the driver must send PRLIs for the FC4s it supports and enable support based on the acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver supports SCSI and NVMe PRLIs. Unfortunately, although the behavior is per standard, many devices have come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI is properly RJT'd but the target decided that it must LOGO after seeing the unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is now in an infinite failure loop. Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI accept or reject status across logout as long as the link stays "up". When retrying login, if the prior NVMe PRLI was rejected, it will not be sent on the next login. Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC statusdavid regan
commit 36415a7964711822e63695ea67fede63979054d9 upstream. The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()Bryan O'Donoghue
commit 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 upstream. Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND partition parser was returning -EPROBE_DEFER waiting for the main smem driver to load. This caused the board to reset. Playing about with the probe() function shows that the problem lies in the core clock being switched off before the nandc_unalloc() routine has completed. If we look at how qcom_nandc_remove() tears down allocated resources we see the expected order is qcom_nandc_unalloc(nandc); clk_disable_unprepare(nandc->aon_clk); clk_disable_unprepare(nandc->core_clk); dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), DMA_BIDIRECTIONAL, 0); Tweaking probe() to both bring up and tear-down in that order removes the reset if we end up deferring elsewhere. Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mtd: rawnand: gpmi: don't leak PM reference in error pathChristian Eggers
commit 9161f365c91614e5a3f5c6dcc44c3b1b33bc59c0 upstream. If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. Reported-by: Pavel Machek <pavel@denx.de> Fixes: f53d4c109a66 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings") Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220125081619.6286-1-ceggers@arri.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23bonding: fix data-races around agg_select_timerEric Dumazet
commit 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 upstream. syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23bonding: force carrier update when releasing slaveZhang Changzhong
commit a6ab75cec1e461f8a35559054c146c21428430b8 upstream. In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: ieee802154: ca8210: Fix lifs/sifs periodsMiquel Raynal
commit bdc120a2bcd834e571ce4115aaddf71ab34495de upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23net: dsa: lan9303: fix reset on probeMans Rullgard
commit 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 upstream. The reset input to the LAN9303 chip is active low, and devicetree gpio handles reflect this. Therefore, the gpio should be requested with an initial state of high in order for the reset signal to be asserted. Other uses of the gpio already use the correct polarity. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fianelil <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: pcie: gen2: fix locking when "HW not ready"Johannes Berg
commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this in the gen2 code as well. Fixes: eda50cde58de ("iwlwifi: pcie: add context information support") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: pcie: fix locking when "HW not ready"Johannes Berg
commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23mmc: block: fix read single on recovery logicChristian Löhle
commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream. On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pendingTudor Ambarus
commit e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream. Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Change-Id: If1bf3e13329cebb9904ae40620f6cf2b7f06fe9f Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mickael GARDET <m.gardet@overkiz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drm/radeon: Fix backlight control on iMac 12,1Nicholas Bishop
commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop <nicholasbishop@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23iwlwifi: fix use-after-freeJohannes Berg
commit bea2662e7818e15d7607d17d57912ac984275d94 upstream. If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner <stefan@agner.ch> Reported-by: Wolfgang Walter <linux@stwm.de> Reported-by: Jason Self <jason@bluehome.net> Reported-by: Dominik Behr <dominik@dominikbehr.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23drm/amdgpu: fix logic inversion in checkChristian König
[ Upstream commit e8ae38720e1a685fd98cfa5ae118c9d07b45ca79 ] We probably never trigger this, but the logic inside the check is inverted. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23nvme-rdma: fix possible use-after-free in transport error_recovery workSagi Grimberg
[ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ] While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23nvme-tcp: fix possible use-after-free in transport error_recovery workSagi Grimberg
[ Upstream commit ff9fc7ebf5c06de1ef72a69f9b1ab40af8b07f9e ] While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech <cleech@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23nvme: fix a possible use-after-free in controller reset during loadSagi Grimberg
[ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ] Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23net: ieee802154: at86rf230: Stop leaking skb'sMiquel Raynal
[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ] Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. In the Tx case we then leak the skb structure. Free the skb structure upon error before returning when appropriate. As the 'is_tx = 0' cannot be moved in the complete handler because of a possible race between the delay in switching to STATE_RX_AACK_ON and a new interrupt, we introduce an intermediate 'was_tx' boolean just for this purpose. There is no Fixes tag applying here, many changes have been made on this area and the issue kind of always existed. Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23platform/x86: ISST: Fix possible circular locking dependency detectedSrinivas Pandruvada
[ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ] As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by: Liwei Song <liwei.song@windriver.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23parisc: Fix sglist access in ccio-dma.cJohn David Anglin
commit d7da660cab47183cded65e11b64497d0f56c6edf upstream. This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23parisc: Fix data TLB miss in sba_unmap_sgJohn David Anglin
commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream. There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23HID:Add support for UGTABLET WP5540Sergio Costas
commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream. This patch adds support for the UGTABLET WP5540 digitizer tablet devices. Without it, the pen moves the cursor, but neither the buttons nor the tap sensor in the tip do work. Signed-off-by: Sergio Costas <rastersoft@gmail.com> Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPERafael J. Wysocki
commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc upstream. Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") made acpi_ec_dispatch_gpe() check pm_wakeup_pending(), but that is before canceling the SCI wakeup, so pm_wakeup_pending() is always true. This causes the loop in acpi_ec_dispatch_gpe() to always terminate after one iteration which may not be correct. Address this issue by canceling the SCI wakeup earlier, from acpi_ec_dispatch_gpe() itself. Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabledJames Smart
commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream. The driver is initiating NVMe PRLIs to determine device NVMe support. This should not be occurring if CONFIG_NVME_FC support is disabled. Correct this by changing the default value for FC4 support. Currently it defaults to FCP and NVMe. With change, when NVME_FC support is not enabled in the kernel, the default value is just FCP. Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16hwmon: (dell-smm) Speed up setting of fan speedArmin Wolf
commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream. When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(), causing an unnecessary SMM call since from the two users of this function, only i8k_ioctl_unlocked() needs to know the new fan status while dell_smm_write() ignores the new fan status. Since SMM calls can be very slow while also making error reporting difficult for dell_smm_write(), remove the function call from i8k_set_fan() and call it separately in i8k_ioctl_unlocked(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: cp210x: add CPI Bulk Coin Recycler idJohan Hovold
commit 6ca0c6283340d819bf9c7d8e76be33c9fbd903ab upstream. Add the device id for the Crane Payment Innovation / Money Controls Bulk Coin Recycler: https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: cp210x: add NCR Retail IO box idJohan Hovold
commit b50f8f09c622297d3cf46e332e17ba8adedec9af upstream. Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane SelfServ Checkout - R6C: https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c Reported-by: Scott Russell <Scott.Russell2@ncr.com> Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: ch341: add support for GW Instek USB2.0-Serial devicesStephan Brunner
commit fa77ce201f7f2d823b07753575122d1ae5597fbe upstream. Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net> Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: option: add ZTE MF286D modemPawel Dembicki
commit d48384c7ed6c8fe4727eaa0f3048f62afd1cd715 upstream. Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320Cameron Williams
commit fbb9b194e15a63c56c5664e76ccd0e85c6100cea upstream. This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: gadget: f_uac2: Define specific wTerminalTypePavel Hofman
commit 5432184107cd0013761bdfa6cb6079527ef87b95 upstream. Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: gadget: rndis: check size of RNDIS_MSG_SET commandGreg Kroah-Hartman
commit 38ea1eac7d88072bbffb630e2b3db83ca649b826 upstream. Check the size of the RNDIS_MSG_SET command given to us before attempting to respond to an invalid message size. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16USB: gadget: validate interface OS descriptor requestsSzymon Heidrich
commit 75e5b4849b81e19e9efe1654b30d7f3151c33c2c upstream. Stall the control endpoint in case provided index exceeds array size of MAX_CONFIG_INTERFACES or when the retrieved function pointer is null. Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford
commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream. The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: dwc3: gadget: Prevent core from processing stale TRBsUdipto Goswami
commit 117b4e96c7f362eb6459543883fc07f77662472c upstream. With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <stable@vger.kernel.org> Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: ulpi: Call of_node_put correctlySean Anderson
commit 0a907ee9d95e3ac35eb023d71f29eae0aaa52d1b upstream. of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16usb: ulpi: Move of_node_put to ulpi_dev_releaseSean Anderson
commit 092f45b13e51666fe8ecbf2d6cd247aa7e6c1f74 upstream. Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixupJann Horn
commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream. ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that. Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAXJonas Malaco
commit c0689e46be23160d925dca95dfc411f1a0462708 upstream. Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16n_tty: wake up poll(POLLRDNORM) on receiving dataTATSUKAWA KOSUKE (立川 江介)
commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream. The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: add array_index_nospec to VT_ACTIVATEJakob Koschel
commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream. in vt_setactivate an almost identical code path has been patched with array_index_nospec. In the VT_ACTIVATE path the user input is from a system call argument instead of a usercopy. For consistency both code paths should have the same mitigations applied. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: fix array_index_nospec in vt_setactivateJakob Koschel
commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream. array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 02:48:16 +0000