summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-08octeontx2-af: Fix a memleak bug in rvu_mbox_init()Zhou Qingyang
commit e07a097b4986afb8f925d0bb32612e1d3e88ce15 upstream. In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08dpaa2-eth: destroy workqueue at the end of remove functionDongliang Mu
commit f4a8adbfe4841491b60c14fe610571e1422359f9 upstream. The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") forgets to destroy workqueue at the end of remove function. Fix this by adding destroy_workqueue before fsl_mc_portal_free and free_netdev. Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: marvell: mvpp2: Fix the computation of shared CPUsChristophe JAILLET
commit b83f5ac7d922e69a109261f5f940eebbd4e514c4 upstream. 'bitmap_fill()' fills a bitmap one 'long' at a time. It is likely that an exact number of bits is expected. Use 'bitmap_set()' instead in order not to set unexpected bits. Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ ↵Sven Schuchmann
is available commit 817b653160db9852d5a0498a31f047e18ce27e5b upstream. On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header supportVincent Whitchurch
commit f8e7dfd6fdabb831846ab1970a875746559d491b upstream. The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097a2f4acf ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_modeLorenzo Bianconi
commit 6e53d6d26920d5221d3f4d4f5ffdd629ea69aa5c upstream. Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023) Fixes: 37f4ca907c46 ("mt76: mt7915: register per-phy HE capabilities for each interface") Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/ddae419a740f1fb9e48afd432035e9f394f512ee.1637239456.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: b53: Add SPI ID tableFlorian Fainelli
commit 88362ebfd7fb569c78d5cb507aa9d3c8fc203839 upstream. Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()Zhou Qingyang
commit addad7643142f500080417dd7272f49b7a185570 upstream. In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net/mlx5e: IPsec: Fix Software parser inner l3 type setting in case of ↵Raed Salem
encapsulation commit c65d638ab39034cbaa36773b980d28106cfc81fa upstream. Current code wrongly uses the skb->protocol field which reflects the outer l3 protocol to set the inner l3 type in Software Parser (SWP) fields settings in the ethernet segment (eseg) in flows where inner l3 exists like in Vxlan over ESP flow, the above method wrongly use the outer protocol type instead of the inner one. thus breaking cases where inner and outer headers have different protocols. Fix by setting the inner l3 type in SWP according to the inner l3 ip header version. Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08iwlwifi: fix warnings produced by kernel debug optionsŁukasz Bartosik
commit f5cecf1d4c5ff76172928bc32e99ca56a5ca2f56 upstream. Fix warnings produced by: - lockdep_assert_wiphy() in function reg_process_self_managed_hint(), - wiphy_dereference() in function iwl_mvm_init_fw_regd(). Both function are expected to be called in critical section. The warnings were discovered when running v5.15 kernel with debug options enabled: 1) Hardware name: Google Delbin/Delbin RIP: 0010:reg_process_self_managed_hint+0x254/0x347 [cfg80211] ... Call Trace: regulatory_set_wiphy_regd_sync+0x3d/0xb0 iwl_mvm_init_mcc+0x49d/0x5a2 iwl_op_mode_mvm_start+0x1b58/0x2507 ? iwl_mvm_reprobe_wk+0x94/0x94 _iwl_op_mode_start+0x146/0x1a3 iwl_opmode_register+0xda/0x13d init_module+0x28/0x1000 2) drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:263 suspicious rcu_dereference_protected() usage! ... Hardware name: Google Delbin/Delbin, BIOS Google_Delbin Call Trace: dump_stack_lvl+0xb1/0xe6 iwl_mvm_init_fw_regd+0x2e7/0x379 iwl_mvm_init_mcc+0x2c6/0x5a2 iwl_op_mode_mvm_start+0x1b58/0x2507 ? iwl_mvm_reprobe_wk+0x94/0x94 _iwl_op_mode_start+0x146/0x1a3 iwl_opmode_register+0xda/0x13d init_module+0x28/0x100 Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211110215744.5487-1-lukasz.bartosik@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang
commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08natsemi: xtensa: fix section mismatch warningsRandy Dunlap
commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream. Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: cbus-gpio: set atomic transfer callbackAaro Koskinen
commit b12764695c3fcade145890b67f82f8b139174cc7 upstream. CBUS transfers have always been atomic, but after commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") we started to see warnings during e.g. poweroff as the atomic callback is not explicitly set. Fix that. Fixes the following WARNING seen during Nokia N810 power down: [ 786.570617] reboot: Power down [ 786.573913] ------------[ cut here ]------------ [ 786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110 [ 786.587799] No atomic I2C transfer handler for 'i2c-2' Fixes: 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: stop dma transfer in case of NACKAlain Volmat
commit 31b90a95ccbbb4b628578ac17e3b3cc8eeacfe31 upstream. In case of receiving a NACK, the dma transfer should be stopped to avoid feeding data into the FIFO. Also ensure to properly return the proper error code and avoid waiting for the end of the dma completion in case of error happening during the transmission. Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: recover the bus on access timeoutAlain Volmat
commit b933d1faf8fa30d16171bcff404e39c41b2a7c84 upstream. When getting an access timeout, ensure that the bus is in a proper state prior to returning the error. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08i2c: stm32f7: flush TX FIFO upon transfer errorsAlain Volmat
commit 0c21d02ca469574d2082379db52d1a27b99eed0c upstream. While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08wireguard: ratelimiter: use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva
commit 4e3fd721710553832460c179c2ee5ce67ef7f1e0 upstream. Use 2-factor argument form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> [Jason: Gustavo's link above is for KSPP, but this isn't actually a security fix, as table_size is bounded to 8192 anyway, and gcc realizes this, so the codegen comes out to be about the same.] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08wireguard: receive: drop handshakes if queue lock is contendedJason A. Donenfeld
commit fb32f4f606c17b869805d7cede8b03d78339b50a upstream. If we're being delivered packets from multiple CPUs so quickly that the ring lock is contended for CPU tries, then it's safe to assume that the queue is near capacity anyway, so just drop the packet rather than spinning. This helps deal with multicore DoS that can interfere with data path performance. It _still_ does not completely fix the issue, but it again chips away at it. Reported-by: Streun Fabio <fstreun@student.ethz.ch> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08wireguard: receive: use ring buffer for incoming handshakesJason A. Donenfeld
commit 886fcee939adb5e2af92741b90643a59f2b54f97 upstream. Apparently the spinlock on incoming_handshake's skb_queue is highly contended, and a torrent of handshake or cookie packets can bring the data plane to its knees, simply by virtue of enqueueing the handshake packets to be processed asynchronously. So, we try switching this to a ring buffer to hopefully have less lock contention. This alleviates the problem somewhat, though it still isn't perfect, so future patches will have to improve this further. However, it at least doesn't completely diminish the data plane. Reported-by: Streun Fabio <fstreun@student.ethz.ch> Reported-by: Joel Wanner <joel.wanner@inf.ethz.ch> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08wireguard: device: reset peer src endpoint when netns exitsJason A. Donenfeld
commit 20ae1d6aa159eb91a9bf09ff92ccaa94dbea92c2 upstream. Each peer's endpoint contains a dst_cache entry that takes a reference to another netdev. When the containing namespace exits, we take down the socket and prevent future sockets from being created (by setting creating_net to NULL), which removes that potential reference on the netns. However, it doesn't release references to the netns that a netdev cached in dst_cache might be taking, so the netns still might fail to exit. Since the socket is gimped anyway, we can simply clear all the dst_caches (by way of clearing the endpoint src), which will release all references. However, the current dst_cache_reset function only releases those references lazily. But it turns out that all of our usages of wg_socket_clear_peer_endpoint_src are called from contexts that are not exactly high-speed or bottle-necked. For example, when there's connection difficulty, or when userspace is reconfiguring the interface. And in particular for this patch, when the netns is exiting. So for those cases, it makes more sense to call dst_release immediately. For that, we add a small helper function to dst_cache. This patch also adds a test to netns.sh from Hangbin Liu to ensure this doesn't regress. Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reported-by: Xiumei Mu <xmu@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Paolo Abeni <pabeni@redhat.com> Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08wireguard: allowedips: add missing __rcu annotation to satisfy sparseJason A. Donenfeld
commit ae9287811ba75571cd69505d50ab0e612ace8572 upstream. A __rcu annotation got lost during refactoring, which caused sparse to become enraged. Fixes: bf7b042dc62a ("wireguard: allowedips: free empty intermediate nodes when removing single node") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassedMarek Behún
commit ede359d8843a2779d232ed30bc36089d4b5962e4 upstream. Function mv88e6xxx_serdes_pcs_get_state() currently does not report link up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit is not set, which testing shows is the case for when auto-negotiation was bypassed (we have AN enabled but link partner does not). An example of such link partner is Marvell 88X3310 PHY, when put into the mode where host interface changes between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed. The 88X3310 does not enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not link with it. Fix this. Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X familyMarek Behún
commit 163000dbc772c1eae9bdfe7c8fe30155db1efd74 upstream. Inband AN is broken on Amethyst in 2500base-x mode when set by standard mechanism (via cmode). (There probably is some weird setting done by default in the switch for this mode that make it cycle in some state or something, because when the peer is the mvneta controller, it receives link change interrupts every ~0.3ms, but the link is always down.) Get around this by configuring the PCS mode to 1000base-x (where inband AN works), and then changing the SerDes frequency while SerDes transmitter and receiver are disabled, before enabling SerDes PHY. After disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid confusing the device (if we leave it at 1000base-x PCS mode but with different frequency, and then change cmode to sgmii, the device won't change the frequency because it thinks it already has the correct one). The register which changes the frequency is undocumented. I discovered it by going through all registers in the ranges 4.f000-4.f100 and 1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x, 5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't make sense (the value was the same for modes which have different frequency). The result of this was: reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii 04.f002 005b 0058 0059 005c 005d 005f 04.f076 3000 0000 1000 4000 5000 7000 04.f07c 0950 0950 1850 0550 0150 0150 1e.8000 0059 0059 0058 0055 0051 0051 1e.8140 0e20 0e20 0e28 0e21 0e42 0e42 Register 04.f002 is the documented Port Operational Confiuration register, it's last 3 bits select PCS type, so changing this register also changes the frequency to the appropriate value. Registers 04.f076 and 04.f07c are not writable. Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8 changed SerDes frequency to 3.125 GHz, while leaving the value of PCS mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation started working correctly. (I didn't try anything with register 1e.8140 since 1e.8000 solved the problem.) Since I don't have documentation for this register 1e.8000.3:0, I am using the constants without names, but my hypothesis is that this register selects PHY frequency. If in the future I have access to an oscilloscope able to handle these frequencies, I will try to test this hypothesis. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X familyMarek Behún
commit 93fd8207bed80ce19aaf59932cbe1c03d418a37d upstream. Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r mode, some undocumented registers need to be written some special values. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiverMarek Behún
commit 7527d66260ac0c603c6baca5146748061fcddbd6 upstream. Save power on 88E6393X by disabling SerDes receiver and transmitter after SerDes is SerDes is disabled. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Drop unnecessary check in mv88e6393x_serdes_erratum_4_6()Marek Behún
commit 8c3318b4874e2dee867f5ae8f6d38f78e044bf71 upstream. The check for lane is unnecessary, since the function is called only with allowed lane argument. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393XMarek Behún
commit 21635d9203e1cf2b73b67e9a86059a62f62a3563 upstream. According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied every time before SerDes is powered on. Split the code for erratum 4.8 into separate function and call it in mv88e6393x_serdes_power(). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08drm/i915/dp: Perform 30ms delay after source OUI writeLyude Paul
commit a44f42ba7f1ad7d3c17bc7d91013fe814a53c5dc upstream. While working on supporting the Intel HDR backlight interface, I noticed that there's a couple of laptops that will very rarely manage to boot up without detecting Intel HDR backlight support - even though it's supported on the system. One example of such a laptop is the Lenovo P17 1st generation. Following some investigation Ville Syrjälä did through the docs they have available to them, they discovered that there's actually supposed to be a 30ms wait after writing the source OUI before we begin setting up the rest of the backlight interface. This seems to be correct, as adding this 30ms delay seems to have completely fixed the probing issues I was previously seeing. So - let's start performing a 30ms wait after writing the OUI, which we do in a manner similar to how we keep track of PPS delays (e.g. record the timestamp of the OUI write, and then wait for however many ms are left since that timestamp right before we interact with the backlight) in order to avoid waiting any longer then we need to. As well, this also avoids us performing this delay on systems where we don't end up using the HDR backlight interface. V3: * Move last_oui_write into intel_dp V2: * Move panel delays into intel_pps Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com (cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08drm/amd/display: Allow DSC on supported MST branch devicesNicholas Kazlauskas
commit 94ebc035456a4ccacfbbef60c444079a256623ad upstream. [Why] When trying to lightup two 4k60 non-DSC displays behind a branch device that supports DSC we can't lightup both at once due to bandwidth limitations - each requires 48 VCPI slots but we only have 63. [How] The workaround already exists in the code but is guarded by a CONFIG that cannot be set by the user and shouldn't need to be. Check for specific branch device IDs to device whether to enable the workaround for multiple display scenarios. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08scsi: ufs: ufs-pci: Add support for Intel ADLAdrian Hunter
commit 7dc9fb47bc9a95f1cc6c5655341860c5e50f91d4 upstream. Add PCI ID and callbacks to support Intel Alder Lake. Link: https://lore.kernel.org/r/20211124204218.1784559-1-adrian.hunter@intel.com Cc: stable@vger.kernel.org # v5.15+ Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGOJames Smart
commit 0956ba63bd94355bf38cd40f7eb9104577739ab8 upstream. A commit introduced formal regstration of all Fabric nodes to the SCSI transport as well as REG/UNREG RPI mailbox requests. The commit introduced the NLP_RELEASE_RPI flag for rports set in the lpfc_cmpl_els_logo_acc() routine to help clean up the RPIs. This new code caused the driver to release the RPI value used for the remote port and marked the RPI invalid. When the driver later attempted to re-login, it would use the invalid RPI and the adapter rejected the PLOGI request. As no login occurred, the devloss timer on the rport expired and connectivity was lost. This patch corrects the code by removing the snippet that requests the rpi to be unregistered. This change only occurs on a node that is already marked to be rediscovered. This puts the code back to its original behavior, preserving the already-assigned rpi value (registered or not) which can be used on the re-login attempts. Link: https://lore.kernel.org/r/20211123165646.62740-1-jsmart2021@gmail.com Fixes: fe83e3b9b422 ("scsi: lpfc: Fix node handling for Fabric Controller and Domain Controller") Cc: <stable@vger.kernel.org> # v5.14+ Co-developed-by: Paul Ely <paul.ely@broadcom.com> Signed-off-by: Paul Ely <paul.ely@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix warning in remove_proc_entry when rmmod sata_fslBaokun Li
commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream. Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fslBaokun Li
commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream. When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flowGuangming
commit 679d94cd7d900871e5bc9cf780bd5b73af35ab42 upstream. For previous version, it uses 'sg_table.nent's to traverse sg_table in pages free flow. However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of created entries in the DMA adderess space. So, use 'sg_table.nents' in pages free flow will case some pages can't be freed. Here we should use sg_table.orig_nents to free pages memory, but use the sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common helper 'for_each_sg' which maybe cause memory leak) is much better. Fixes: d963ab0f15fb0 ("dma-buf: system_heap: Allocate higher order pages if available") Signed-off-by: Guangming <Guangming.Cao@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> # 5.11.* Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08iwlwifi: mvm: retry init flow if failedMordechay Goodstein
commit 5283dd677e52af9db6fe6ad11b2f12220d519d0c upstream. In some very rare cases the init flow may fail. In many cases, this is recoverable, so we can retry. Implement a loop to retry two more times after the first attempt failed. This can happen in two different situations, namely during probe and during mac80211 start. For the first case, a simple loop is enough. For the second case, we need to add a flag to prevent mac80211 from trying to restart it as well, leaving full control with the driver. Cc: <stable@vger.kernel.org> Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()Xiongfeng Wang
commit 2c1b5a84669d2477d8fffe9136e86a2cff591729 upstream. When I hot added a CPU, I found 'cpufreq' directory was not created below /sys/devices/system/cpu/cpuX/. It is because get_cpu_device() failed in add_cpu_dev_symlink(). cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface. It will be called when the CPU device registered into the system. The call chain is as follows: register_cpu() ->device_register() ->device_add() ->bus_probe_device() ->cpufreq_add_dev() But only after the CPU device has been registered, we can get the CPU device by get_cpu_device(), otherwise it will return NULL. Since we already have the CPU device in cpufreq_add_dev(), pass it to add_cpu_dev_symlink(). I noticed that the 'kobj' of the CPU device has been added into the system before cpufreq_add_dev(). Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08ipmi: Move remove_work to dedicated workqueueIoanna Alifieraki
commit 1d49eb91e86e8c1c1614c72e3e958b6b7e2472a9 upstream. Currently when removing an ipmi_user the removal is deferred as a work on the system's workqueue. Although this guarantees the free operation will occur in non atomic context, it can race with the ipmi_msghandler module removal (see [1]) . In case a remove_user work is scheduled for removal and shortly after ipmi_msghandler module is removed we can end up in a situation where the module is removed fist and when the work is executed the system crashes with : BUG: unable to handle page fault for address: ffffffffc05c3450 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page because the pages of the module are gone. In cleanup_ipmi() there is no easy way to detect if there are any pending works to flush them before removing the module. This patch creates a separate workqueue and schedules the remove_work works on it. When removing the module the workqueue is drained when destroyed to avoid the race. [1] https://bugs.launchpad.net/bugs/1950666 Cc: stable@vger.kernel.org # 5.1 Fixes: 3b9a907223d7 (ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier) Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Message-Id: <20211115131645.25116-1-ioanna-maria.alifieraki@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka
commit ed53ae75693096f1c10b4561edd31a07b631bd72 upstream. As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/ Reported-and-tested-by: Exuvo <exuvo@exuvo.se> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmitStephen Suryaputra
commit ee201011c1e1563c114a55c86eb164b236f18e84 upstream. IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi
type3_infoblock() [ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ] The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue
bound [ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ] In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in ↵Teng Qi
hns_dsaf_ge_srst_by_port() [ Upstream commit a66998e0fbf213d47d02813b9679426129d0d114 ] The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ata: libahci: Adjust behavior when StorageD3Enable _DSD is setMario Limonciello
[ Upstream commit 7c5f641a5914ce0303b06bcfcd7674ee64aeebe9 ] The StorageD3Enable _DSD is used for the vendor to indicate that the disk should be opted into or out of a different behavior based upon the platform design. For AMD's Renoir and Green Sardine platforms it's important that any attached SATA storage has transitioned into DevSlp when s2idle is used. If the disk is left in active/partial/slumber, then the system is not able to resume properly. When the StorageD3Enable _DSD is detected, check the system is using s2idle and DevSlp is enabled and if so explicitly wait long enough for the disk to enter DevSlp. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08ata: ahci: Add Green Sardine vendor ID as board_ahci_mobileMario Limonciello
[ Upstream commit 1527f69204fe35f341cb599f1cb01bd02daf4374 ] AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly. commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well. Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/amdgpu: fix potential memleakBernard Zhao
[ Upstream commit 27dfaedc0d321b4ea4e10c53e4679d6911ab17aa ] In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered againshaoyunl
[ Upstream commit 2cf49e00d40d5132e3d067b5aa6d84791929ab15 ] In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08drm/amd/pm: Remove artificial freq level on Navi1xLijo Lazar
[ Upstream commit be83a5676767c99c2417083c29d42aa1e109a69d ] Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: usb: r8152: Add MAC passthrough support for more Lenovo DocksAaron Ma
[ Upstream commit f77b83b5bbab53d2be339184838b19ed2c62c0a5 ] Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original Realtek USB ethernet chip ID 0bda:8153. Lenovo Docks always use their own IDs for usb hub, even for older Docks. If parent hub is from Lenovo, then r8152 should try MAC passthrough. Verified on Lenovo TBT3 dock too. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08scsi: iscsi: Unblock session then wake up error handlerMike Christie
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08thermal: core: Reset previous low and high trip during thermal zone initManaf Meethalavalappu Pallikunhi
[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ] During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip. During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario. Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 01:38:04 +0000