summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-07-10nvme: Fix u32 overflow in the number of namespace list calculationJaesoo Lee
[ Upstream commit c8e8c77b3bdbade6e26e8e76595f141ede12b692 ] The Number of Namespaces (nn) field in the identify controller data structure is defined as u32 and the maximum allowed value in NVMe specification is 0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP() operation used in nvme_scan_ns_list() by casting the nn to u64. Signed-off-by: Jaesoo Lee <jalee@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10hwmon: (pmbus/core) Treat parameters as paged if on multiple pagesRobert Hancock
[ Upstream commit 4a60570dce658e3f8885bbcf852430b99f65aca5 ] Some chips have attributes which exist on more than one page but the attribute is not presently marked as paged. This causes the attributes to be generated with the same label, which makes it impossible for userspace to tell them apart. Marking all such attributes as paged would result in the page suffix being added regardless of whether they were present on more than one page or not, which might break existing setups. Therefore, we add a second check which treats the attribute as paged, even if not marked as such, if it is present on multiple pages. Fixes: b4ce237b7f7d ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10s390/qeth: fix VLAN attribute in bridge_hostnotify udev eventAlexandra Winter
[ Upstream commit 335726195e460cb6b3f795b695bfd31f0ea70ef0 ] Enabling sysfs attribute bridge_hostnotify triggers a series of udev events for the MAC addresses of all currently connected peers. In case no VLAN is set for a peer, the device reports the corresponding MAC addresses with VLAN ID 4096. This currently results in attribute VLAN=4096 for all non-VLAN interfaces in the initial series of events after host-notify is enabled. Instead, no VLAN attribute should be reported in the udev event for non-VLAN interfaces. Only the initial events face this issue. For dynamic changes that are reported later, the device uses a validity flag. This also changes the code so that it now sets the VLAN attribute for MAC addresses with VID 0. On Linux, no qeth interface will ever be registered with VID 0: Linux kernel registers VID 0 on all network interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0. Peers with other OSs could register MACs with VID 0. Fixes: 9f48b9db9a22 ("qeth: bridgeport support - address notifications") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10scsi: ufs: Check that space was properly alloced in copy_query_responseAvri Altman
[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ] struct ufs_dev_cmd is the main container that supports device management commands. In the case of a read descriptor request, we assume that the proper space was allocated in dev_cmd to hold the returning descriptor. This is no longer true, as there are flows that doesn't use dev_cmd for device management requests, and was wrong in the first place. Fixes: d44a5f98bb49 (ufs: query descriptor API) Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10drm/arm/hdlcd: Allow a bit of clock toleranceRobin Murphy
[ Upstream commit 1c810739097fdeb31b393b67a0a1e3d7ffdd9f63 ] On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is ↵Sean Wang
enabled [ Upstream commit 880c2d4b2fdfd580ebcd6bb7240a8027a1d34751 ] Should only enable HW RX_2BYTE_OFFSET function in the case NET_IP_ALIGN equals to 2. Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supportedSean Wang
[ Upstream commit 9e4f56f1a7f3287718d0083b5cb85298dc05a5fd ] Should hw_feature as hardware capability flags to check if hardware LRO got support. Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10net: hns: Fix loopback test failed at copper portsYonglong Liu
[ Upstream commit 2e1f164861e500f4e068a9d909bbd3fcc7841483 ] When doing a loopback test at copper ports, the serdes loopback and the phy loopback will fail, because of the adjust link had not finished, and phy not ready. Adds sleep between adjust link and test process to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0Nikita Yushchenko
[ Upstream commit 62394708f3e01c9f2be6be74eb6305bae1ed924f ] When non-bridged, non-vlan'ed mv88e6xxx port is moving down, error message is logged: failed to kill vid 0081/0 for device eth_cu_1000_4 This is caused by call from __vlan_vid_del() with vin set to zero, over call chain this results into _mv88e6xxx_port_vlan_del() called with vid=0, and mv88e6xxx_vtu_get() called from there returns -EINVAL. On symmetric path moving port up, call goes through mv88e6xxx_port_vlan_prepare() that calls mv88e6xxx_port_check_hw_vlan() that returns -EOPNOTSUPP for zero vid. This patch changes mv88e6xxx_vtu_get() to also return -EOPNOTSUPP for zero vid, then this error code is explicitly cleared in dsa_slave_vlan_rx_kill_vid() and error message is no longer logged. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr valueMike Marciniszyn
[ Upstream commit 35164f5259a47ea756fa1deb3e463ac2a4f10dc9 ] The command 'ibv_devinfo -v' reports 0 for max_mr. Fix by assigning the query values after the mr lkey_table has been built rather than early on in the driver. Fixes: 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt") Reviewed-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10IB/hfi1: Insure freeze_work work_struct is canceled on shutdownMike Marciniszyn
[ Upstream commit 6d517353c70bb0818b691ca003afdcb5ee5ea44e ] By code inspection, the freeze_work is never canceled. Fix by adding a cancel_work_sync in the shutdown path to insure it is no longer running. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10IB/rdmavt: Fix alloc_qpn() WARN_ON()Mike Marciniszyn
[ Upstream commit 2abae62a26a265129b364d8c1ef3be55e2c01309 ] The qpn allocation logic has a WARN_ON() that intends to detect the use of an index that will introduce bits in the lower order bits of the QOS bits in the QPN. Unfortunately, it has the following bugs: - it misfires when wrapping QPN allocation for non-QOS - it doesn't correctly detect low order QOS bits (despite the comment) The WARN_ON() should not be applied to non-QOS (qos_shift == 1). Additionally, it SHOULD test the qpn bits per the table below: 2 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, 0, sc0], qp bit 1 always 0* 3-4 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, sc1, sc0], qp bits [21] always 0 5-8 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, sc2, sc1, sc0] qp bits [321] always 0 Fix by qualifying the warning for qos_shift > 1 and producing the correct mask to insure the above bits are zero without generating a superfluous warning. Fixes: 501edc42446e ("IB/rdmavt: Correct warning during QPN allocation") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10parport: Fix mem leak in parport_register_dev_modelYueHaibing
[ Upstream commit 1c7ebeabc9e5ee12e42075a597de40fdb9059530 ] BUG: memory leak unreferenced object 0xffff8881df48cda0 (size 16): comm "syz-executor.0", pid 5077, jiffies 4295994670 (age 22.280s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d2d0d5fe>] parport_register_dev_model+0x141/0x6e0 [parport] [<00000000782f6dab>] 0xffffffffc15d1196 [<00000000d2ca6ae4>] platform_drv_probe+0x7e/0x100 [<00000000628c2a94>] really_probe+0x342/0x4d0 [<000000006874f5da>] driver_probe_device+0x8c/0x170 [<00000000424de37a>] __device_attach_driver+0xda/0x100 [<000000002acab09a>] bus_for_each_drv+0xfe/0x170 [<000000003d9e5f31>] __device_attach+0x190/0x230 [<0000000035d32f80>] bus_probe_device+0x123/0x140 [<00000000a05ba627>] device_add+0x7cc/0xce0 [<000000003f7560bf>] platform_device_add+0x230/0x3c0 [<000000002a0be07d>] 0xffffffffc15d0949 [<000000007361d8d2>] port_check+0x3b/0x50 [parport] [<000000004d67200f>] bus_for_each_dev+0x115/0x180 [<000000003ccfd11c>] __parport_register_driver+0x1f0/0x210 [parport] [<00000000987f06fc>] 0xffffffffc15d803e After commit 4e5a74f1db8d ("parport: Revert "parport: fix memory leak""), free_pardevice do not free par_dev->state, we should free it in error path of parport_register_dev_model before return. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 4e5a74f1db8d ("parport: Revert "parport: fix memory leak"") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOADAndrey Smirnov
commit 7c7da40da1640ce6814dab1e8031b44e19e5a3f6 upstream. In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD need to be adjusted before being passed on uinput_ioctl_handler() since code built with -m32 will be passing slightly different values. Extend the code already covering UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well. Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10IB/hfi1: Silence txreq allocation warningsMike Marciniszyn
commit 3230f4a8d44e4a0bb7afea814b280b5129521f52 upstream. The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10usb: chipidea: udc: workaround for endpoint conflict issuePeter Chen
commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@vger.kernel.org> #v3.14+ Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10scsi: ufs: Avoid runtime suspend possibly being blocked foreverStanley Chu
commit 24e2e7a19f7e4b83d0d5189040d997bce3596473 upstream. UFS runtime suspend can be triggered after pm_runtime_enable() is invoked in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered before binding ufs_hba structure to ufs device structure via platform_set_drvdata(), then UFS runtime suspend will be no longer triggered in the future because its dev->power.runtime_error was set in the first triggering and does not have any chance to be cleared. To be more clear, dev->power.runtime_error is set if hba is NULL in ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where dev->power.runtime_error is set as -EINVAL. In this case, any future rpm_suspend() for UFS device fails because rpm_check_suspend_allowed() fails due to non-zero dev->power.runtime_error. To resolve this issue, make sure the first UFS runtime suspend get valid "hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is successfully bound to UFS device structure. Fixes: 62694735ca95 ([SCSI] ufs: Add runtime PM support for UFS host controller driver) Cc: stable@vger.kernel.org Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22mlxsw: spectrum: Prevent force of 56GAmit Cohen
[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ] Force of 56G is not supported by hardware in Ethernet devices. This configuration fails with a bad parameter error from firmware. Add check of this case. Instead of trying to set 56G with autoneg off, return a meaningful error. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: libsas: delete sas port if expander discover failedJason Yan
[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ] The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be deleted when the expander failed to discover. This will cause resource leak and a further issue of kernel BUG like below: [159785.843156] port-2:17:29: trying to add phy phy-2:17:29 fails: it's already part of another port [159785.852144] ------------[ cut here ]------------ [159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086! [159785.863000] Internal error: Oops - BUG: 0 [#1] SMP [159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G W OE 4.19.25-vhulk1901.1.0.h111.aarch64 #1 [159785.878458] Hardware name: Huawei Technologies Co., Ltd. Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019 [159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO) [159785.900094] pc : sas_port_add_phy+0x188/0x1b8 [159785.904524] lr : sas_port_add_phy+0x188/0x1b8 [159785.908952] sp : ffff0001120e3b80 [159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000 [159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560 [159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000 [159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708 [159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400 [159785.939264] x19: ffff802adea2d800 x18: 0000000000000010 [159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0 [159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165 [159785.955417] x13: 726c612073277469 x12: ffff00006887b830 [159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020 [159785.966186] x9 : 0000000000002453 x8 : 726f702072656874 [159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290 [159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000 [159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00 [159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000 [159785.993108] Process kworker/u96:2 (pid: 16993, stack limit = 0x0000000072dae094) [159786.000576] Call trace: [159786.003097] sas_port_add_phy+0x188/0x1b8 [159786.007179] sas_ex_get_linkrate.isra.5+0x134/0x140 [159786.012130] sas_ex_discover_expander+0x128/0x408 [159786.016906] sas_ex_discover_dev+0x218/0x4c8 [159786.021249] sas_ex_discover_devices+0x9c/0x1a8 [159786.025852] sas_discover_root_expander+0x134/0x160 [159786.030802] sas_discover_domain+0x1b8/0x1e8 [159786.035148] process_one_work+0x1b4/0x3f8 [159786.039230] worker_thread+0x54/0x470 [159786.042967] kthread+0x134/0x138 [159786.046269] ret_from_fork+0x10/0x18 [159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000) [159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE) hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE) [159786.067202] ---[ end trace 03622b9e2d99e196 ]--- [159786.071893] Kernel panic - not syncing: Fatal exception [159786.077190] SMP: stopping secondary CPUs [159786.081192] Kernel Offset: disabled [159786.084753] CPU features: 0x2,a2a00a38 Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: Jian Luo <luojian5@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: smartpqi: properly set both the DMA mask and the coherent DMA maskLianbo Jiang
[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ] When SME is enabled, the smartpqi driver won't work on the HP DL385 G10 machine, which causes the failure of kernel boot because it fails to allocate pqi error buffer. Please refer to the kernel log: .... [ 9.431749] usbcore: registered new interface driver uas [ 9.441524] Microsemi PQI Driver (v1.1.4-130) [ 9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5 [ 9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found Starting dracut initqueue hook... [ OK ] Started Show Plymouth Boot Scre[ 9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1 en. [ OK ] Started Forward Password Requests to Plymouth Directory Watch. [[0;[ 9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer .... [ 139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts [ 139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts Basically, the fact that the coherent DMA mask value wasn't set caused the driver to fall back to SWIOTLB when SME is active. For correct operation, lets call the dma_set_mask_and_coherent() to properly set the mask for both streaming and coherent, in order to inform the kernel about the devices DMA addressing capabilities. Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()Varun Prakash
[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ] ip_dev_find() can return NULL so add a check for NULL pointer. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCsYoshihiro Shimoda
[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ] The sh_eth_close() resets the MAC and then calls phy_stop() so that mdio read access result is incorrect without any error according to kernel trace like below: ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff According to the hardware manual, the RMII mode should be set to 1 before operation the Ethernet MAC. However, the previous code was not set to 1 after the driver issued the soft_reset in sh_eth_dev_exit() so that the mdio read access result seemed incorrect. To fix the issue, this patch adds a condition and set the RMII mode register in sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs. Note that when I have tried to move the sh_eth_dev_exit() calling after phy_stop() on sh_eth_close(), but it gets worse (kernel panic happened and it seems that a register is accessed while the clock is off). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwrYingjoe Chen
[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ] If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user will not be freed. Pump index up so it will be freed. Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN") Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()Kees Cook
[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ] Building with Clang reports the redundant use of MODULE_DEVICE_TABLE(): drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table' MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:90:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); ^ ./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE' extern typeof(name) __mod_##type##__##name##_device_table \ ^ <scratch space>:85:1: note: expanded from here __mod_eisa__de4x5_eisa_ids_device_table ^ This drops the one further from the table definition to match the common use of MODULE_DEVICE_TABLE(). Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22gpio: fix gpio-adp5588 build errorsRandy Dunlap
[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ] The gpio-adp5588 driver uses interfaces that are provided by GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry. Fixes these build errors: ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’: ../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’ dev->gpio_chip.irq.domain, gpio)); ^ ../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’: ../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration] ret = gpiochip_irqchip_add_nested(&dev->gpio_chip, ^ ../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration] gpiochip_set_nested_irqchip(&dev->gpio_chip, ^ Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-gpio@vger.kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22mISDN: make sure device name is NUL terminatedDan Carpenter
[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ] The user can change the device_name with the IMSETDEVNAME ioctl, but we need to ensure that the user's name is NUL terminated. Otherwise it could result in a buffer overflow when we copy the name back to the user with IMGETDEVINFO ioctl. I also changed two strcpy() calls which handle the name to strscpy(). Hopefully, there aren't any other ways to create a too long name, but it's nice to do this as a kernel hardening measure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22Revert "staging: vc04_services: prevent integer overflow in create_pagelist()"Greg Kroah-Hartman
This reverts commit cf07331c8827c9e9e0b4274c9b60204c18592241 which was commit ca641bae6da977d638458e78cd1487b6160a2718 upstream. Martin writes: This commit breaks the kernel build because the vchiq_pagelist_info struct is not defined in v4.9.182. It was only added in v4.10, in commit 4807f2c0e684e907c501cb96049809d7a957dbc2. Reported-by: Martin Weinelt <martin@linuxlounge.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22sunhv: Fix device naming inconsistency between sunhv_console and sunhv_regJohn Paul Adrian Glaubitz
[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ] In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22be2net: Fix number of Rx queues used for flow hashingIvan Vecera
[ Upstream commit 718f4a2537089ea41903bf357071306163bc7c04 ] Number of Rx queues used for flow hashing returned by the driver is incorrect and this bug prevents user to use the last Rx queue in indirection table. Let's say we have a NIC with 6 combined queues: [root@sm-03 ~]# ethtool -l enp4s0f0 Channel parameters for enp4s0f0: Pre-set maximums: RX: 5 TX: 5 Other: 0 Combined: 6 Current hardware settings: RX: 0 TX: 0 Other: 0 Combined: 6 Default indirection table maps all (6) queues equally but the driver reports only 5 rings available. [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 5 RX ring(s): 0: 0 1 2 3 4 5 0 1 8: 2 3 4 5 0 1 2 3 16: 4 5 0 1 2 3 4 5 24: 0 1 2 3 4 5 0 1 ... Now change indirection table somehow: [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1 [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 6 RX ring(s): 0: 0 0 0 0 0 0 0 0 ... 64: 1 1 1 1 1 1 1 1 ... Now it is not possible to change mapping back to equal (default) state: [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6 Cannot set RX flow hash configuration: Invalid argument Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options") Reported-by: Tianhao <tizhao@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22rtc: pcf8523: don't return invalid date when battery is lowBaruch Siach
commit ecb4a353d3afd45b9bb30c85d03ee113a0589079 upstream. The RTC_VL_READ ioctl reports the low battery condition. Still, pcf8523_rtc_read_time() happily returns invalid dates in this case. Check the battery health on pcf8523_rtc_read_time() to avoid that. Reported-by: Erik Čuk <erik.cuk@domel.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22USB: serial: option: add Telit 0x1260 and 0x1261 compositionsDaniele Palmas
commit f3dfd4072c3ee6e287f501a18b5718b185d6a940 upstream. Added support for Telit LE910Cx 0x1260 and 0x1261 compositions. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS modeJörgen Storvist
commit 5417a7e482962952e622eabd60cd3600dd65dedf upstream. Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS mode. Reserved the interface for ADB. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9011 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22USB: serial: pl2303: add Allied Telesis VT-Kit3Chris Packham
commit c5f81656a18b271976a86724dadd8344e54de74e upstream. This is adds the vendor and device id for the AT-VT-Kit3 which is a pl2303-based device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22USB: usb-storage: Add new ID to ums-realtekKai-Heng Feng
commit 1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream. There is one more Realtek card reader requires ums-realtek to work correctly. Add the device ID to support it. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.Marco Zatta
commit bd21f0222adab64974b7d1b4b8c7ce6b23e9ea4d upstream. This patch fixes the chipmunk-like voice that manifets randomly when using the integrated mic of the Logitech Webcam HD C270. The issue was solved initially for this device by commit 2394d67e446b ("USB: add RESET_RESUME for webcams shown to be quirky") but it was then reintroduced by e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams"). This patch is to have the fix back. Signed-off-by: Marco Zatta <marco@zatta.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22usb: dwc2: Fix DMA cache alignment issuesMartin Schiller
commit 4a4863bf2e7932e584a3a462d3c6daf891142ddc upstream. Insert a padding between data and the stored_xfer_buffer pointer to ensure they are not on the same cache line. Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS) Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") Fixes: 56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary") Cc: <stable@vger.kernel.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()Murray McAllister
commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream. If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after vmw_cmd_res_check(), leading to a null pointer dereference in vmw_view_add(). Cc: <stable@vger.kernel.org> Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister <murray.mcallister@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an ↵Murray McAllister
invalid read commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream. If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID of SVGA3D_INVALID_ID, and a shader type of SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc() when the offset is calculated. Cc: <stable@vger.kernel.org> Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Murray McAllister <murray.mcallister@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22usbnet: ipheth: fix racing conditionBernd Eckstein
[ Upstream commit 94d250fae48e6f873d8362308f5c4d02cd1b1fd2 ] Fix a racing condition in ipheth.c that can lead to slow performance. Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called. When this happens, the queue is stopped longer than it needs to be, thus reducing network performance. Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order is always correct. In case, usb_submit_urb() fails, the queue is woken up again as callback will not fire. Testing: This racing condition is usually not noticeable, as it has to occur very frequently to slowdown the network. The callback from the USB is usually triggered slow enough, so the situation does not appear. However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10, the we loose the race quite often and the following speedup can be noticed: Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: bnx2fc: fix incorrect cast to u64 on shift operationColin Ian King
[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ] Currently an int is being shifted and the result is being cast to a u64 which leads to undefined behaviour if the shift is more than 31 bits. Fix this by casting the integer value 1 to u64 before the shift operation. Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: lpfc: add check for loss of ndlp when sending RRQJames Smart
[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ] There was a missing qualification of a valid ndlp structure when calling to send an RRQ for an abort. Add the check. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22Drivers: misc: fix out-of-bounds access in function param_set_kgdbts_varYoung Xiao
[ Upstream commit b281218ad4311a0342a40cb02fb17a363df08b48 ] There is an out-of-bounds access to "config[len - 1]" array when the variable "len" is zero. See commit dada6a43b040 ("kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()") for details. Signed-off-by: Young Xiao <YangX92@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22bcache: fix stack corruption by PRECEDING_KEY()Coly Li
commit 31b90956b124240aa8c63250243ae1a53585c5e2 upstream. Recently people report bcache code compiled with gcc9 is broken, one of the buggy behavior I observe is that two adjacent 4KB I/Os should merge into one but they don't. Finally it turns out to be a stack corruption caused by macro PRECEDING_KEY(). See how PRECEDING_KEY() is defined in bset.h, 437 #define PRECEDING_KEY(_k) \ 438 ({ \ 439 struct bkey *_ret = NULL; \ 440 \ 441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \ 442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \ 443 \ 444 if (!_ret->low) \ 445 _ret->high--; \ 446 _ret->low--; \ 447 } \ 448 \ 449 _ret; \ 450 }) At line 442, _ret points to address of a on-stack variable combined by KEY(), the life range of this on-stack variable is in line 442-446, once _ret is returned to bch_btree_insert_key(), the returned address points to an invalid stack address and this address is overwritten in the following called bch_btree_iter_init(). Then argument 'search' of bch_btree_iter_init() points to some address inside stackframe of bch_btree_iter_init(), exact address depends on how the compiler allocates stack space. Now the stack is corrupted. Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl> Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Tested-by: Pierre JUHEN <pierre.juhen@orange.fr> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22i2c: acorn: fix i2c warningRussell King
commit ca21f851cc9643af049226d57fabc3c883ea648e upstream. The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name" warning in the I2C core driver, resulting in the RTC being inaccessible. Fix this. Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22media: v4l2-ioctl: clear fields in s_parmHans Verkuil
commit 8a7c5594c02022ca5fa7fb603e11b3e1feb76ed5 upstream. Zero the reserved capture/output array. Zero the extendedmode (it is never used in drivers). Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY, as that is the only valid flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22libata: Extend quirks for the ST1000LM024 drives with NOLPM quirkHans de Goede
commit 31f6264e225fb92cf6f4b63031424f20797c297d upstream. We've received a bugreport that using LPM with ST1000LM024 drives leads to system lockups. So it seems that these models are buggy in more then 1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22pwm: Fix deadlock warning when removing PWM devicePhong Hoang
[ Upstream commit 347ab9480313737c0f1aaa08e8f2e1a791235535 ] This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 #7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424c9ba9 ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdde2d95 ("pwm: Add sysfs interface") Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22pwm: tiehrpwm: Update shadow register for disabling PWMsChristoph Vogtländer
[ Upstream commit b00ef53053191d3025c15e8041699f8c9d132daf ] It must be made sure that immediate mode is not already set, when modifying shadow register value in ehrpwm_pwm_disable(). Otherwise modifications to the action-qualifier continuous S/W force register(AQSFRC) will be done in the active register. This may happen when both channels are being disabled. In this case, only the first channel state will be recorded as disabled in the shadow register. Later, when enabling the first channel again, the second channel would be enabled as well. Setting RLDCSF to zero, first, ensures that the shadow register is updated as desired. Fixes: 38dabd91ff0b ("pwm: tiehrpwm: Fix disabling of output of PWMs") Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> [vigneshr@ti.com: Improve commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22dmaengine: idma64: Use actual device for DMA transfersAndy Shevchenko
[ Upstream commit 5ba846b1ee0792f5a596b9b0b86d6e8cdebfab06 ] Intel IOMMU, when enabled, tries to find the domain of the device, assuming it's a PCI one, during DMA operations, such as mapping or unmapping. Since we are splitting the actual PCI device to couple of children via MFD framework (see drivers/mfd/intel-lpss.c for details), the DMA device appears to be a platform one, and thus not an actual one that performs DMA. In a such situation IOMMU can't find or allocate a proper domain for its operations. As a result, all DMA operations are failed. In order to fix this, supply parent of the platform device to the DMA engine framework and fix filter functions accordingly. We may rely on the fact that parent is a real PCI device, because no other configuration is present in the wild. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22gpio: gpio-omap: add check for off wake capable gpiosTony Lindgren
[ Upstream commit da38ef3ed10a09248e13ae16530c2c6d448dc47d ] We are currently assuming all GPIOs are non-wakeup capable GPIOs as we not configuring the bank->non_wakeup_gpios like we used to earlier with platform_data. Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer while considering that later patches may want to configure SoC specific bank->non_wakeup_gpios for the GPIOs in wakeup domain. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 15:57:13 +0000