summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-14irqchip: nvic: Fix offset for Interrupt Priority OffsetsVladimir Murzin
commit c5e0cbe2858d278a27d5b3fe31890aea5be064c4 upstream. According to ARM(v7M) ARM Interrupt Priority Offsets located at 0xE000E400-0xE000E5EC, while 0xE000E300-0xE000E33C covers read-only Interrupt Active Bit Registers Fixes: 292ec080491d ("irqchip: Add support for ARMv7-M NVIC") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211201110259.84857-1-vladimir.murzin@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALLWudi Wang
commit b383a42ca523ce54bcbd63f7c8f3cf974abc9b9a upstream. INVALL CMD specifies that the ITS must ensure any caching associated with the interrupt collection defined by ICID is consistent with the LPI configuration tables held in memory for all Redistributors. SYNC is required to ensure that INVALL is executed. Currently, LPI configuration data may be inconsistent with that in the memory within a short period of time after the INVALL command is executed. Signed-off-by: Wudi Wang <wangwudi@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Link: https://lore.kernel.org/r/20211208015429.5007-1-zhangshaokun@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: accel: kxcjk-1013: Fix possible memory leak in probe and removeYang Yingliang
commit 70c9774e180d151abaab358108e3510a8e615215 upstream. When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a25691c1f967 ("iio: accel: kxcjk1013: allow using an external trigger") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: <Stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211025124159.2700301-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: itg3200: Call iio_trigger_notify_done() on errorLars-Peter Clausen
commit 67fe29583e72b2103abb661bb58036e3c1f00277 upstream. IIO trigger handlers must call iio_trigger_notify_done() when done. This must be done even when an error occurred. Otherwise the trigger will be seen as busy indefinitely and the trigger handler will never be called again. The itg3200 driver neglects to call iio_trigger_notify_done() when there is an error reading the gyro data. Fix this by making sure that iio_trigger_notify_done() is included in the error exit path. Fixes: 9dbf091da080 ("iio: gyro: Add itg3200") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211101144055.13858-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: ltr501: Don't return error code in trigger handlerLars-Peter Clausen
commit ef9d67fa72c1b149a420587e435a3e888bdbf74f upstream. IIO trigger handlers need to return one of the irqreturn_t values. Returning an error code is not supported. The ltr501 interrupt handler gets this right for most error paths, but there is one case where it returns the error code. In addition for this particular case the trigger handler does not call `iio_trigger_notify_done()`. Which when not done keeps the triggered disabled forever. Modify the code so that the function returns a valid irqreturn_t value as well as calling `iio_trigger_notify_done()` on all exit paths. Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024171251.22896-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: mma8452: Fix trigger reference coutingLars-Peter Clausen
commit cd0082235783f814241a1c9483fb89e405f4f892 upstream. The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device. Fixes: ae6d9ce05691 ("iio: mma8452: Add support for interrupt driven triggers.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024092700.6844-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iio: stk3310: Don't return error code in interrupt handlerLars-Peter Clausen
commit 8e1eeca5afa7ba84d885987165dbdc5decf15413 upstream. Interrupt handlers must return one of the irqreturn_t values. Returning a error code is not supported. The stk3310 event interrupt handler returns an error code when reading the flags register fails. Fix the implementation to always return an irqreturn_t value. Fixes: 3dd477acbdd1 ("iio: light: Add threshold interrupt support for STK3310") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211024171251.22896-3-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14usb: core: config: fix validation of wMaxPacketValue entriesPavel Hofman
commit 1a3910c80966e4a76b25ce812f6bea0ef1b1d530 upstream. The checks performed by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable. Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14USB: gadget: zero allocate endpoint 0 buffersGreg Kroah-Hartman
commit 86ebbc11bb3f60908a51f3e41a17e3f477c2eaa3 upstream. Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14USB: gadget: detect too-big endpoint 0 requestsGreg Kroah-Hartman
commit 153a2d7e3350cc89d406ba2d35be8793a64c2038 upstream. Sometimes USB hosts can ask for buffers that are too large from endpoint 0, which should not be allowed. If this happens for OUT requests, stall the endpoint, but for IN requests, trim the request size to the endpoint buffer size. Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net/qla3xxx: fix an error code in ql_adapter_up()Dan Carpenter
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream. The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang
commit b5bd95d17102b6719e3531d627875b9690371383 upstream. Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: altera: set a couple error code in probe()Dan Carpenter
commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream. There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zeroLee Jones
commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream. Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14binder: use wake_up_pollfree()Eric Biggers
commit a880b28a71e39013e357fd3adccd1d8a31bc69a8 upstream. wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll and aio poll are fortunately not affected by this, but it's very fragile. Thus, the new function wake_up_pollfree() has been introduced. Convert binder to use wake_up_pollfree(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: f5cb779ba163 ("ANDROID: binder: remove waitqueue when thread exits.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211209010455.42744-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14libata: add horkage for ASMedia 1092Hannes Reinecke
commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream. The ASMedia 1092 has a configuration mode which will present a dummy device; sadly the implementation falsely claims to provide a device with 100M which doesn't actually exist. So disable this device to avoid errors during boot. Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol
commit 94cddf1e9227a171b27292509d59691819c458db upstream. After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: sja1000: fix use after free in ems_pcmcia_add_card()Dan Carpenter
commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream. If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: check for valid USB device for many HID driversGreg Kroah-Hartman
commit 93020953d0fa7035fd036ad87a47ae2b7aa4ae33 upstream. Many HID drivers assume that the HID device assigned to them is a USB device as that was the only way HID devices used to be able to be created in Linux. However, with the additional ways that HID devices can be created for many different bus types, that is no longer true, so properly check that we have a USB device associated with the HID device before allowing a driver that makes this assumption to claim it. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Michael Zaidman <michael.zaidman@gmail.com> Cc: Stefan Achatz <erazor_de@users.sourceforge.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [bentiss: amended for thrustmater.c hunk to apply] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: wacom: fix problems when device is not a valid USB deviceGreg Kroah-Hartman
commit 720ac467204a70308bd687927ed475afb904e11b upstream. The wacom driver accepts devices of more than just USB types, but some code paths can cause problems if the device being controlled is not a USB device due to a lack of checking. Add the needed checks to ensure that the USB device accesses are only happening on a "real" USB device, and not one on some other bus. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy on some USB HID driversGreg Kroah-Hartman
commit f237d9028f844a86955fc9da59d7ac4a5c55d7d5 upstream. Some HID drivers are only for USB drivers, yet did not depend on CONFIG_USB_HID. This was hidden by the fact that the USB functions were stubbed out in the past, but now that drivers are checking for USB devices properly, build errors can occur with some random configurations. Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy to hid-chiconyGreg Kroah-Hartman
commit d080811f27936f712f619f847389f403ac873b8f upstream. The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: add USB_HID dependancy to hid-prodikeysGreg Kroah-Hartman
commit 30cb3c2ad24b66fb7639a6d1f4390c74d6e68f94 upstream. The prodikeys HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like nios2 when building due to new changes to the prodikeys driver. Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14HID: introduce hid_is_using_ll_driverJason Gerecke
commit fc2237a724a9e448599076d7d23497f51e2f7441 upstream. Although HID itself is transport-agnostic, occasionally a driver may want to interact with the low-level transport that a device is connected through. To do this, we need to know what kind of bus is in use. The first guess may be to look at the 'bus' field of the 'struct hid_device', but this field may be emulated in some cases (e.g. uhid). More ideally, we can check which ll_driver a device is using. This function introduces a 'hid_is_using_ll_driver' function and makes the 'struct hid_ll_driver' of the four most common transports accessible through hid.h. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: pl011: Add ACPI SBSA UART match idPierre Gondois
commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream. The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000 Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID. Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate. Cc: <stable@vger.kernel.org> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08tty: serial: msm_serial: Deactivate RX DMA for polling supportSven Eckelmann
commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream. The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of setup, it is often sharing a serial device with the normal system console. This is usually no problem because the polling helpers can consume input values directly (when in kgdb context) and the normal Linux handlers can only consume new input values after kgdb switched back. This is not true anymore when RX DMA is enabled for UARTDM controllers. Single input values can no longer be received correctly. Instead following seems to happen: * on 1. input, some old input is read (continuously) * on 2. input, two old inputs are read (continuously) * on 3. input, three old input values are read (continuously) * on 4. input, 4 previous inputs are received This repeats then for each group of 4 input values. This behavior changes slightly depending on what state the controller was when the first input was received. But this makes working with kgdb basically impossible because control messages are always corrupted when kgdboc tries to parse them. RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid these kind of problems. No such problem was noticed for TX DMA. Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08vgacon: Propagate console boot parameters before calling `vc_resize'Maciej W. Rozycki
commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream. Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang
commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08natsemi: xtensa: fix section mismatch warningsRandy Dunlap
commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream. Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix warning in remove_proc_entry when rmmod sata_fslBaokun Li
commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream. Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fslBaokun Li
commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream. When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: ethernet: dec: tulip: de4x5: fix possible array overflows in ↵Teng Qi
type3_infoblock() [ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ] The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008) and the if statement if (MOTO_SROM_BUG) lp->active = 0; using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p; However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8). Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of ↵zhangyue
bound [ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ] In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. Signed-off-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08scsi: iscsi: Unblock session then wake up error handlerMike Christie
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deepSlark Xiao
[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ] When WWAN device wake from S3 deep, under thinkpad platform, WWAN would be disabled. This disable status could be checked by command 'nmcli r wwan' or 'rfkill list'. Issue analysis as below: When host resume from S3 deep, thinkpad_acpi driver would call hotkey_resume() function. Finnaly, it will use wan_get_status to check the current status of WWAN device. During this resume progress, wan_get_status would always return off even WWAN boot up completely. In patch V2, Hans said 'sw_state should be unchanged after a suspend/resume. It's better to drop the tpacpi_rfk_update_swstate call all together from the resume path'. And it's confimed by Lenovo that GWAN is no longer available from WHL generation because the design does not match with current pin control. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08tty: hvc: replace BUG_ON() with negative return valueJuergen Gross
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream. Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: don't trust the backend response data blindlyJuergen Gross
commit a884daa61a7d91650987e855464526aef219590f upstream. Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page. Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: disentangle tx_skb_freelistJuergen Gross
commit 21631d2d741a64a073e167c27769e73bc7844a2f upstream. The tx_skb_freelist elements are in a single linked list with the request id used as link reference. The per element link field is in a union with the skb pointer of an in use request. Move the link reference out of the union in order to enable a later reuse of it for requests which need a populated skb pointer. Rename add_id_to_freelist() and get_id_from_freelist() to add_id_to_list() and get_id_from_list() in order to prepare using those for other lists as well. Define ~0 as value to indicate the end of a list and place that value into the link for a request not being on the list. When freeing a skb zero the skb pointer in the request. Use a NULL value of the skb pointer instead of skb_entry_is_link() for deciding whether a request has a skb linked to it. Remove skb_entry_set_link() and open code it instead as it is really trivial now. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: don't read data from request on the ring pageJuergen Gross
commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream. In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/netfront: read response from backend only onceJuergen Gross
commit 8446066bf8c1f9f7b7412c43fbea0fb87464d75b upstream. In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/blkfront: don't trust the backend response data blindlyJuergen Gross
commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream. Today blkfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request. Introduce a new state of the ring BLKIF_STATE_ERROR which will be switched to in case an inconsistency is being detected. Recovering from this state is possible only via removing and adding the virtual device again (e.g. via a suspend/resume cycle). Make all warning messages issued due to valid error responses rate limited in order to avoid message floods being triggered by a malicious backend. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/blkfront: don't take local copy of a request from the ring pageJuergen Gross
commit 8f5a695d99000fc3aa73934d7ced33cfc64dcdab upstream. In order to avoid a malicious backend being able to influence the local copy of a request build the request locally first and then copy it to the ring page instead of doing it the other way round as today. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen/blkfront: read response from backend only onceJuergen Gross
commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream. In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy
[ Upstream commit 0ee4ba13e09c9d9c1cb6abb59da8295d9952328b ] While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08xen: detect uninitialized xenbus in xenbus_initStefano Stabellini
commit 36e8f60f0867d3b70d398d653c17108459a04efe upstream. If the xenstore page hasn't been allocated properly, reading the value of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return error. Instead, it will succeed and return zero. Instead of attempting to xen_remap a bad guest physical address, detect this condition and return early. Note that although a guest physical address of zero for HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice and zero has never been validly used in that capacity. Also recognize all bits set as an invalid value. For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns above ULONG_MAX should never be passed by the Xen tools to HVM guests anyway, so check for this condition and return early. Cc: stable@vger.kernel.org Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20211123210748.1910236-1-sstabellini@kernel.org Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xen: don't continue xenstore initialization in case of errorsStefano Stabellini
commit 08f6c2b09ebd4b326dbe96d13f94fee8f9814c78 upstream. In case of errors in xenbus_init (e.g. missing xen_store_gfn parameter), we goto out_error but we forget to reset xen_store_domain_type to XS_UNKNOWN. As a consequence xenbus_probe_initcall and other initcalls will still try to initialize xenstore resulting into a crash at boot. [ 2.479830] Call trace: [ 2.482314] xb_init_comms+0x18/0x150 [ 2.486354] xs_init+0x34/0x138 [ 2.489786] xenbus_probe+0x4c/0x70 [ 2.498432] xenbus_probe_initcall+0x2c/0x7c [ 2.503944] do_one_initcall+0x54/0x1b8 [ 2.507358] kernel_init_freeable+0x1ac/0x210 [ 2.511617] kernel_init+0x28/0x130 [ 2.516112] ret_from_fork+0x10/0x20 Cc: <Stable@vger.kernel.org> Cc: jbeulich@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Link: https://lore.kernel.org/r/20211115222719.2558207-1-sstabellini@kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()Dan Carpenter
commit b535917c51acc97fb0761b1edec85f1f3d02bda4 upstream. The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that. Fixes: 66898177e7e5 ("staging: rtl8192e: Fix unload/reload problem") Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117072016.GA5237@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08binder: fix test regression due to sender_euid changeTodd Kjos
commit c21a80ca0684ec2910344d72556c816cb8940c01 upstream. This is a partial revert of commit 29bc22ac5e5b ("binder: use euid from cred instead of using task"). Setting sender_euid using proc->cred caused some Android system test regressions that need further investigation. It is a partial reversion because subsequent patches rely on proc->cred. Fixes: 29bc22ac5e5b ("binder: use euid from cred instead of using task") Cc: stable@vger.kernel.org # 4.4+ Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Todd Kjos <tkjos@google.com> Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66 Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08usb: hub: Fix locking issues with address0_mutexMathias Nyman
commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream. Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Cc: <stable@vger.kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08usb: hub: Fix usb enumeration issue due to address0 raceMathias Nyman
commit 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b upstream. xHC hardware can only have one slot in default state with address 0 waiting for a unique address at a time, otherwise "undefined behavior may occur" according to xhci spec 5.4.3.4 The address0_mutex exists to prevent this across both xhci roothubs. If hub_port_init() fails, it may unlock the mutex and exit with a xhci slot in default state. If the other xhci roothub calls hub_port_init() at this point we end up with two slots in default state. Make sure the address0_mutex protects the slot default state across hub_port_init() retries, until slot is addressed or disabled. Note, one known minor case is not fixed by this patch. If device needs to be reset during resume, but fails all hub_port_init() retries in usb_reset_and_verify_device(), then it's possible the slot is still left in default state when address0_mutex is unlocked. Cc: <stable@vger.kernel.org> Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 22:16:28 +0000