summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-07-03virt: vbox: Only copy_from_user the request-header onceWenwen Wang
commit bd23a7269834dc7c1f93e83535d16ebc44b75eba upstream. In vbg_misc_device_ioctl(), the header of the ioctl argument is copied from the userspace pointer 'arg' and saved to the kernel object 'hdr'. Then the 'version', 'size_in', and 'size_out' fields of 'hdr' are verified. Before this commit, after the checks a buffer for the entire request would be allocated and then all data including the verified header would be copied from the userspace 'arg' pointer again. Given that the 'arg' pointer resides in userspace, a malicious userspace process can race to change the data pointed to by 'arg' between the two copies. By doing so, the user can bypass the verifications on the ioctl argument. This commit fixes this by using the already checked copy of the header to fill the header part of the allocated buffer and only copying the remainder of the data from userspace. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03dm thin: handle running out of data space vs concurrent discardMike Snitzer
commit a685557fbbc3122ed11e8ad3fa63a11ebc5de8c3 upstream. Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by: Dennis Yang <dennisyang@qnap.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03dm zoned: avoid triggering reclaim from inside dmz_map()Bart Van Assche
commit 2d0b2d64d325e22939d9db3ba784f1236459ed98 upstream. This patch avoids that lockdep reports the following: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc1 #62 Not tainted ------------------------------------------------------ kswapd0/84 is trying to acquire lock: 00000000c313516d (&xfs_nondir_ilock_class){++++}, at: xfs_free_eofblocks+0xa2/0x1e0 but task is already holding lock: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}: kmem_cache_alloc+0x2c/0x2b0 radix_tree_node_alloc.constprop.19+0x3d/0xc0 __radix_tree_create+0x161/0x1c0 __radix_tree_insert+0x45/0x210 dmz_map+0x245/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 mpage_readpages+0x19e/0x1f0 read_pages+0x6d/0x1b0 __do_page_cache_readahead+0x21b/0x2d0 force_page_cache_readahead+0xc4/0x100 generic_file_read_iter+0x7c6/0xd20 __vfs_read+0x102/0x180 vfs_read+0x9b/0x140 ksys_read+0x55/0xc0 do_syscall_64+0x5a/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dmz->chunk_lock){+.+.}: dmz_map+0x133/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 _xfs_buf_ioapply+0x31c/0x590 xfs_buf_submit_wait+0x73/0x520 xfs_buf_read_map+0x134/0x2f0 xfs_trans_read_buf_map+0xc3/0x580 xfs_read_agf+0xa5/0x1e0 xfs_alloc_read_agf+0x59/0x2b0 xfs_alloc_pagf_init+0x27/0x60 xfs_bmap_longest_free_extent+0x43/0xb0 xfs_bmap_btalloc_nullfb+0x7f/0xf0 xfs_bmap_btalloc+0x428/0x7c0 xfs_bmapi_write+0x598/0xcc0 xfs_iomap_write_allocate+0x15a/0x330 xfs_map_blocks+0x1cf/0x3f0 xfs_do_writepage+0x15f/0x7b0 write_cache_pages+0x1ca/0x540 xfs_vm_writepages+0x65/0xa0 do_writepages+0x48/0xf0 __writeback_single_inode+0x58/0x730 writeback_sb_inodes+0x249/0x5c0 wb_writeback+0x11e/0x550 wb_workfn+0xa3/0x670 process_one_work+0x228/0x670 worker_thread+0x3c/0x390 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 -> #0 (&xfs_nondir_ilock_class){++++}: down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &xfs_nondir_ilock_class --> &dmz->chunk_lock --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&dmz->chunk_lock); lock(fs_reclaim); lock(&xfs_nondir_ilock_class);
2018-07-03pmem: only set QUEUE_FLAG_DAX for fsdax modeRoss Zwisler
commit 4557641b4c7046625c026fb809c47ef0d43ae595 upstream. QUEUE_FLAG_DAX is an indication that a given block device supports filesystem DAX and should not be set for PMEM namespaces which are in "raw" mode. These namespaces lack struct page and are prevented from participating in filesystem DAX as of commit 569d0365f571 ("dax: require 'struct page' by default for filesystem dax"). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Mike Snitzer <snitzer@redhat.com> Fixes: 569d0365f571 ("dax: require 'struct page' by default for filesystem dax") Cc: stable@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03dm: use bio_split() when splitting out the already processed bioMike Snitzer
commit f21c601a2bb319ec19eb4562eadc7797d90fd90e upstream. Use of bio_clone_bioset() is inefficient if there is no need to clone the original bio's bio_vec array. Best to use the bio_clone_fast() variant. Also, just using bio_advance() is only part of what is needed to properly setup the clone -- it doesn't account for the various bio_integrity() related work that also needs to be performed (see bio_split). Address both of these issues by switching from bio_clone_bioset() to bio_split(). Fixes: 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.15+, requires removal of '&' before md->queue->bio_split Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03i2c: gpio: initialize SCL to HIGH againWolfram Sang
commit 12b731dd46d9ee646318e6e9dc587314a3908a46 upstream. It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Revert "i2c: algo-bit: init the bus to a known state"Wolfram Sang
commit 2a2c8ee2d72c4f1ba0f7fbb02dc74f971df0f934 upstream. This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru> Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: elantech - fix V4 report decoding for module with middle key???
commit e0ae2519ca004a628fa55aeef969c37edce522d3 upstream. Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: elantech - enable middle button of touchpads on ThinkPad P52Aaron Ma
commit 24bb555e6e46d96e2a954aa0295029a81cc9bbaa upstream. PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: elan_i2c_smbus - fix more potential stack buffer overflowsBen Hutchings
commit 50fc7b61959af4b95fafce7fe5dd565199e0b61a upstream. Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: psmouse - fix button reporting for basic protocolsDmitry Torokhov
commit 03ae3a9caf4a59edd32b65c89c375a98ce3ea1ef upstream. The commit ba667650c568 ("Input: psmouse - clean up code") was pretty brain-dead and broke extra buttons reporting for variety of PS/2 mice: Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect the data coming from the device when reporting events. Fixes: ba667650c568 ("Input: psmouse - clean up code") Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: xpad - fix GPD Win 2 controller nameEnno Boland
commit dd6bee81c942c0ea01030da9356026afb88f9d18 upstream. This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by: Enno Boland <gottox@voidlinux.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03net: ethernet: fix suspend/resume in davinci_emacBartosz Golaszewski
commit dc45519eb181b5687ac8382361a8aa085acd1fe1 upstream. This patch reverts commit 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03xen: Remove unnecessary BUG_ON from __unbind_from_irq()Boris Ostrovsky
commit eef04c7b3786ff0c9cb1019278b6c6c2ea0ad4ff upstream. Commit 910f8befdf5b ("xen/pirq: fix error path cleanup when binding MSIs") fixed a couple of errors in error cleanup path of xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to __unbind_from_irq() with an unbound irq, which would result in triggering the BUG_ON there. Since there is really no reason for the BUG_ON (xen_free_irq() can operate on unbound irqs) we can remove it. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03rbd: flush rbd_dev->watch_dwork after watch is unregisteredDongsheng Yang
commit 23edca864951250af845a11da86bb3ea63522ed2 upstream. There is a problem if we are going to unmap a rbd device and the watch_dwork is going to queue delayed work for watch: unmap Thread watch Thread timer do_rbd_remove cancel_tasks_sync(rbd_dev) queue_delayed_work for watch destroy_workqueue(rbd_dev->task_wq) drain_workqueue(wq) destroy other resources in wq call_timer_fn __queue_work() Then the delayed work escape the cancel_tasks_sync() and destroy_workqueue() and we will get an user-after-free call trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ #13 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__queue_work+0x6a/0x3b0 RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086 RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000 RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00 R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970 R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0 Call Trace: <IRQ> ? __queue_work+0x3b0/0x3b0 call_timer_fn+0x2d/0x130 run_timer_softirq+0x16e/0x430 ? tick_sched_timer+0x37/0x70 __do_softirq+0xd2/0x280 irq_exit+0xd5/0xe0 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 [ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch() either bails out early because the watch is UNREGISTERED at that point or just gets cancelled. ] Cc: stable@vger.kernel.org Fixes: 99d1694310df ("rbd: retry watch re-registration periodically") Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03pwm: lpss: platform: Save/restore the ctrl register over a suspend/resumeHans de Goede
commit 1d375b58c12f08d8570b30b865def4734517f04f upstream. On some devices the contents of the ctrl register get lost over a suspend/resume and the PWM comes back up disabled after the resume. This is seen on some Bay Trail devices with the PWM in ACPI enumerated mode, so it shows up as a platform device instead of a PCI device. If we still think it is enabled and then try to change the duty-cycle after this, we end up with a "PWM_SW_UPDATE was not cleared" error and the PWM is stuck in that state from then on. This commit adds suspend and resume pm callbacks to the pwm-lpss-platform code, which save/restore the ctrl register over a suspend/resume, fixing this. Note that: 1) There is no need to do this over a runtime suspend, since we only runtime suspend when disabled and then we properly set the enable bit and reprogram the timings when we re-enable the PWM. 2) This may be happening on more systems then we realize, but has been covered up sofar by a bug in the acpi-lpss.c code which was save/restoring the regular device registers instead of the lpss private registers due to lpss_device_desc.prv_offset not being set. This is fixed by a later patch in this series. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI IDAlexandr Savca
commit 8938fc7b8fe9ccfa11751ead502a8d385b607967 upstream. Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by: Alexandr Savca <alexandr.savca@saltedge.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Input: silead - add MSSL0002 ACPI HIDHans de Goede
commit fc573af632b44f355f8fa15ab505f5593368078d upstream. The Silead touchscreen on the Chuwi Vi8 tablet uses MSSL0002 as ACPI HID, rather then the usual MSSL1680 id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devicesHans de Goede
commit fdcb613d49321b5bf5d5a1bd0fba8e7c241dcc70 upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c748179754 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb8a7f ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03video: uvesafb: Fix integer overflow in allocationKees Cook
commit 9f645bcc566a1e9f921bdae7528a01ced5bc3713 upstream. cmap->len can get close to INT_MAX/2, allowing for an integer overflow in allocation. This uses kmalloc_array() instead to catch the condition. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Fixes: 8bdb3a2d7df48 ("uvesafb: the driver core") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: dvb_frontend: fix locking issues at dvb_frontend_get_event()Mauro Carvalho Chehab
commit 76d81243a487c09619822ef8e7201a756e58a87d upstream. As warned by smatch: drivers/media/dvb-core/dvb_frontend.c:314 dvb_frontend_get_event() warn: inconsistent returns 'sem:&fepriv->sem'. Locked on: line 288 line 295 line 306 line 314 Unlocked on: line 303 The lock implementation for get event is wrong, as, if an interrupt occurs, down_interruptible() will fail, and the routine will call up() twice when userspace calls the ioctl again. The bad code is there since when Linux migrated to git, in 2005. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: rc: mce_kbd decoder: fix stuck keysSean Young
commit 63039c29f7a4ce8a8bd165173840543c0098d7b0 upstream. The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: cx231xx: Add support for AverMedia DVD EZMaker 7Kai-Heng Feng
commit 29e61d6ef061b012d320327af7dbb3990e75be45 upstream. User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER. Add the device to the id_table to make it work. BugLink: https://bugs.launchpad.net/bugs/1620762 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: v4l2-compat-ioctl32: prevent go past max sizeMauro Carvalho Chehab
commit ea72fbf588ac9c017224dcdaa2019ff52ca56fee upstream. As warned by smatch: drivers/media/v4l2-core/v4l2-compat-ioctl32.c:879 put_v4l2_ext_controls32() warn: check for integer overflow 'count' The access_ok() logic should check for too big arrays too. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: cx231xx: Ignore an i2c mux adapterBrad Love
commit 13a257f8d5a530bd2aa004a067ba1f2b8f5ef76d upstream. Hauppauge 935C cannot communicate with the si2157 when using the mux adapter returned by the si2168, so disable it to fix the device. Signed-off-by: Brad Love <brad@nextdimension.cc> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: uvcvideo: Support realtek's UVC 1.5 deviceming_qian
commit f620d1d7afc7db57ab59f35000752840c91f67e7 upstream. media: uvcvideo: Support UVC 1.5 video probe & commit controls The length of UVC 1.5 video control is 48, and it is 34 for UVC 1.1. Change it to 48 for UVC 1.5 device, and the UVC 1.5 device can be recognized. More changes to the driver are needed for full UVC 1.5 compatibility. However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have been reported to work well. [laurent.pinchart@ideasonboard.com: Factor out code to helper function, update size checks] Cc: stable@vger.kernel.org Signed-off-by: ming_qian <ming_qian@realsil.com.cn> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Ana Guerrero Lopez <ana.guerrero@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03media: vsp1: Release buffers for each video nodeKieran Bingham
commit 83967993f2320575c0ab27a80bf1d7535909c2f4 upstream. Commit 372b2b0399fc ("media: v4l: vsp1: Release buffers in start_streaming error path") introduced a helper to clean up buffers on error paths, but inadvertently changed the code such that only the output WPF buffers were cleaned, rather than the video node being operated on. Since then vsp1_video_cleanup_pipeline() has grown to perform both video node cleanup, as well as pipeline cleanup. Split the implementation into two distinct functions that perform the required work, so that each video node can release its buffers correctly on streamoff. The pipe cleanup that was performed in the vsp1_video_stop_streaming() (releasing the pipe->dl) is moved to the function for clarity. Fixes: 372b2b0399fc ("media: v4l: vsp1: Release buffers in start_streaming error path") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03remoteproc: Prevent incorrect rproc state on xfer mem ownership failureSibi Sankar
commit 2724807f7f70a6a3e67b3f6bf921cc77ed39c8a1 upstream. Any failure in the secure call for transferring mem ownership of mba region to Q6 would result in reporting that the remoteproc device is running. This is because the previous q6v5_clk_enable would have been a success. Prevent this by updating variable 'ret' accordingly. Cc: stable@vger.kernel.org Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clockJarkko Nikula
commit 4e93a658576ab115977225c9d0992b97ff19ba8c upstream. Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mfd: intel-lpss: Program REMAP register in PIO modeAndy Shevchenko
commit d28b62520830b2d0bffa2d98e81afc9f5e537e8b upstream. According to documentation REMAP register has to be programmed in either DMA or PIO mode of the slice. Move the DMA capability check below to let REMAP register be programmed in PIO mode. Cc: stable@vger.kernel.org # 4.3+ Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mfd: twl-core: Fix clock initializationPeter Ujfalusi
commit c218b3b242bd04539621b468f01ecd2af5a21a45 upstream. When looking up the clock we must use the client->dev as device since that is the one which is probed via DT. Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Revert "iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and ↵Linus Torvalds
dma_direct_{alloc,free}()" commit e16c4790de39dc861b749674c2a9319507f6f64f upstream. This reverts commit b468620f2a1dfdcfddfd6fa54367b8bcc1b51248. It turns out that this broke drm on AMD platforms. Quoting Gabriel C: "I can confirm reverting b468620f2a1dfdcfddfd6fa54367b8bcc1b51248 fixes that issue for me. The GPU is working fine with SME enabled. Now with working GPU :) I can also confirm performance is back to normal without doing any other workarounds" Christan König analyzed it partially: "As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs() in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled" and Christoph Hellwig responded: "I think the prime issue is that dma_direct_alloc respects the dma mask. Which we don't need if actually using the iommu. This would be mostly harmless exept for the the SEV bit high in the address that makes the checks fail. For now I'd say revert this commit for 4.17/4.18-rc and I'll look into addressing these issues properly" Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org # v4.17 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03backlight: tps65217_bl: Fix Device Tree node lookupJohan Hovold
commit 2b12dfa124dbadf391cb9a616aaa6b056823bf75 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. This would only cause trouble if the child node is missing while there is an unrelated node named "backlight" elsewhere in the tree. Cc: stable <stable@vger.kernel.org> # 3.7 Fixes: eebfdc17cc6c ("backlight: Add TPS65217 WLED driver") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03backlight: max8925_bl: Fix Device Tree node lookupJohan Hovold
commit d1cc0ec3da23e44c23712579515494b374f111c9 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent mfd node was also prematurely freed, while the child backlight node was leaked. Cc: stable <stable@vger.kernel.org> # 3.9 Fixes: 47ec340cb8e2 ("mfd: max8925: Support dt for backlight") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03backlight: as3711_bl: Fix Device Tree node lookupJohan Hovold
commit 4a9c8bb2aca5b5a2a15744333729745dd9903562 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent mfd node was also prematurely freed. Cc: stable <stable@vger.kernel.org> # 3.10 Fixes: 59eb2b5e57ea ("drivers/video/backlight/as3711_bl.c: add OF support") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03ubi: fastmap: Correctly handle interrupted erasures in EBARichard Weinberger
commit 781932375ffc6411713ee0926ccae8596ed0261c upstream. Fastmap cannot track the LEB unmap operation, therefore it can happen that after an interrupted erasure the mapping still looks good from Fastmap's point of view, while reading from the PEB will cause an ECC error and confuses the upper layer. Instead of teaching users of UBI how to deal with that, we read back the VID header and check for errors. If the PEB is empty or shows ECC errors we fixup the mapping and schedule the PEB for erasure. Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Reported-by: martin bayern <Martinbayern@outlook.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03ubi: fastmap: Cancel work upon detachRichard Weinberger
commit 6e7d80161066c99d12580d1b985cb1408bb58cf1 upstream. Ben Hutchings pointed out that 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") does not really fix the problem, it just reduces the risk to hit the race window where fastmap work races against free()'ing ubi->volumes[]. The correct approach is making sure that no more fastmap work is in progress before we free ubi data structures. So we cancel fastmap work right after the ubi background thread is stopped. By setting ubi->thread_enabled to zero we make sure that no further work tries to wake the thread. Fixes: 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Martin Townsend <mtownsend1973@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03rpmsg: smd: do not use mananged resources for endpoints and channelsSrinivas Kandagatla
commit 4a2e84c6ed85434ce7843e4844b4d3263f7e233b upstream. All the managed resources would be freed by the time release function is invoked. Handling such memory in qcom_smd_edge_release() would do bad things. Found this issue while testing Audio usecase where the dsp is started up and shutdown in a loop. This patch fixes this issue by using simple kzalloc for allocating channel->name and channel which is then freed in qcom_smd_edge_release(). Without this patch restarting a remoteproc would crash the system. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03md: fix two problems with setting the "re-add" device state.NeilBrown
commit 011abdc9df559ec75779bb7c53a744c69b2a94c6 upstream. If "re-add" is written to the "state" file for a device which is faulty, this has an effect similar to removing and re-adding the device. It should take up the same slot in the array that it previously had, and an accelerated (e.g. bitmap-based) rebuild should happen. The slot that "it previously had" is determined by rdev->saved_raid_disk. However this is not set when a device fails (only when a device is added), and it is cleared when resync completes. This means that "re-add" will normally work once, but may not work a second time. This patch includes two fixes. 1/ when a device fails, record the ->raid_disk value in ->saved_raid_disk before clearing ->raid_disk 2/ when "re-add" is written to a device for which ->saved_raid_disk is not set, fail. I think this is suitable for stable as it can cause re-adding a device to be forced to do a full resync which takes a lot longer and so puts data at more risk. Cc: <stable@vger.kernel.org> (v4.1) Fixes: 97f6cd39da22 ("md-cluster: re-add capabilities") Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03rtc: sun6i: Fix bit_idx value for clk_register_gateMichael Trimarchi
commit 09018d4bd7994c2c9f775029bc24589bc85f76fa upstream. clk-gate core will take bit_idx through clk_register_gate and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx) which is wrong and eventually external gate clock is not enabling. This patch fixed by passing bit index and the original change introduced from below commit. "rtc: sun6i: Add support for the external oscillator gate" (sha1: 17ecd246414b3a0fe0cb248c86977a8bda465b7b) Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Fixes: 17ecd246414b ("rtc: sun6i: Add support for the external oscillator gate") Cc: stable@vger.kernel.org Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03clk: at91: PLL recalc_rate() now using cached MUL and DIV valuesMarcin Ziemianowicz
commit a982e45dc150da3a08907b6dd676b735391704b4 upstream. When a USB device is connected to the USB host port on the SAM9N12 then you get "-62" error which seems to indicate USB replies from the device are timing out. Based on a logic sniffer, I saw the USB bus was running at half speed. The PLL code uses cached MUL and DIV values which get set in set_rate() and applied in prepare(), but the recalc_rate() function instead queries the hardware instead of using these cached values. Therefore, if recalc_rate() is called between a set_rate() and prepare(), the wrong frequency is calculated and later the USB clock divider for the SAM9N12 SOC will be configured for an incorrect clock. In my case, the PLL hardware was set to 96 Mhz before the OHCI driver loads, and therefore the usb clock divider was being set to /2 even though the OHCI driver set the PLL to 48 Mhz. As an alternative explanation, I noticed this was fixed in the past by 87e2ed338f1b ("clk: at91: fix recalc_rate implementation of PLL driver") but the bug was later re-introduced by 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally"). Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally) Cc: <stable@vger.kernel.org> Signed-off-by: Marcin Ziemianowicz <marcin@ziemianowicz.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICALMartin Blumenstingl
commit 72e1f2302040398dafb64bbb93abdde78c1f2267 upstream. Until commit 05f814402d6174 ("clk: meson: add fdiv clock gates") we relied on the bootloader to enable the fclk_div clock gates. It turns out that our clock tree is incomplete at least on Meson8b (tested with an Odroid-C1, which uses an RGMII PHY) because after the mentioned commit Ethernet is not working anymore (no RX/TX activity can be seen). At the same time Ethernet was still working on Meson8m2 with a RMII PHY. Testing has shown that as soon as "fclk_div2" is disabled Ethernet stops working on Odroid-C1. Unfortunately it's currently not clear what the Ethernet controller IP block uses the fclk_div2 clock for. Mark the clock as CLK_IS_CRITICAL to keep it enabled (as it's already enabled by most bootloaders by default, which is why we didn't notice it before). Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates") Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03libnvdimm, pmem: Unconditionally deep flush on *syncRoss Zwisler
commit ce7f11a230d5b7165480b96c0cc7a90358b5b5e2 upstream. Prior to this commit we would only do a "deep flush" (have nvdimm_flush() write to each of the flush hints for a region) in response to an msync/fsync/sync call if the nvdimm_has_cache() returned true at the time we were setting up the request queue. This happens due to the write cache value passed in to blk_queue_write_cache(), which then causes the block layer to send down BIOs with REQ_FUA and REQ_PREFLUSH set. We do have a "write_cache" sysfs entry for namespaces, i.e.: /sys/bus/nd/devices/pfn0.1/block/pmem0/dax/write_cache which can be used to control whether or not the kernel thinks a given namespace has a write cache, but this didn't modify the deep flush behavior that we set up when the driver was initialized. Instead, it only modified whether or not DAX would flush CPU caches via dax_flush() in response to *sync calls. Simplify this by making the *sync deep flush always happen, regardless of the write cache setting of a namespace. The DAX CPU cache flushing will still be controlled the write_cache setting of the namespace. Cc: <stable@vger.kernel.org> Fixes: 5fdf8e5ba566 ("libnvdimm: re-enable deep flush for pmem devices via fsync()") Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03linvdimm, pmem: Preserve read-only setting for pmem devicesRobert Elliott
commit 254a4cd50b9fe2291a12b8902e08e56dcc4e9b10 upstream. The pmem driver does not honor a forced read-only setting for very long: $ blockdev --setro /dev/pmem0 $ blockdev --getro /dev/pmem0 1 followed by various commands like these: $ blockdev --rereadpt /dev/pmem0 or $ mkfs.ext4 /dev/pmem0 results in this in the kernel serial log: nd_pmem namespace0.0: region0 read-write, marking pmem0 read-write with the read-only setting lost: $ blockdev --getro /dev/pmem0 0 That's from bus.c nvdimm_revalidate_disk(), which always applies the setting from nd_region (which is initially based on the ACPI NFIT NVDIMM state flags not_armed bit). In contrast, commit 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") fixed this issue for SCSI devices to preserve the previous setting if it was set to read-only. This patch modifies bus.c to preserve any previous read-only setting. It also eliminates the kernel serial log print except for cases where read-write is changed to read-only, so it doesn't print read-only to read-only non-changes. Cc: <stable@vger.kernel.org> Fixes: 581388209405 ("libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only") Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix missing REC trigger trace on enqueue without ERP threadSteffen Maier
commit 6a76550841d412330bd86aed3238d1888ba70f0e upstream. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILEDSteffen Maier
commit 8c3d20aada70042a39c6a6625be037c1472ca610 upstream. That other commit introduced an inconsistency because it would trace on ERP_FAILED for all callers of port forced reopen triggers (not just terminate_rport_io), but it would not trace on ERP_FAILED for all callers of other ERP triggers such as adapter, port regular, LUN. Therefore, generalize that other commit. zfcp_erp_action_enqueue() already had two early outs which re-used the one zfcp_dbf_rec_trig() call. All ERP trigger functions finally run through zfcp_erp_action_enqueue(). So move the special handling for ZFCP_STATUS_COMMON_ERP_FAILED into zfcp_erp_action_enqueue() and add another early out with new trace marker for pseudo ERP need in this case. This removes all early returns from all ERP trigger functions so we always end up at zfcp_dbf_rec_trig(). Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : ....... LUN : 0x... WWPN : 0x... D_ID : 0x... Adapter status : 0x... Port status : 0x... LUN status : 0x... Ready count : 0x... Running count : 0x... ERP want : 0x0. ZFCP_ERP_ACTION_REOPEN_... ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for ERP_FAILEDSteffen Maier
commit d70aab55924b44f213fec2b900b095430b33eec6 upstream. For problem determination we always want to see when we were invoked on the terminate_rport_io callback whether we perform something or not. Temporal event sequence of interest with a long fast_io_fail_tmo of 27 sec: loose remote port t workqueue [s] zfcp_q_<dev> IRQ zfcperp<dev> === ================== =================== ============================ 0 recv RSCN q p.test_link_work block rport start fast_io_fail_tmo send ADISC ELS 4 recv ADISC fail block zfcp_port port forced reopen send open port 12 recv open port fail q p.gid_pn_work zfcp_erp_wakeup (zfcp_erp_wait would return) GID_PN fail Before this point, we got a SCSI trace with tag "sctrpi1" on fast_io_fail, e.g. with the typical 5 sec setting. port.status |= ERP_FAILED If fast_io_fail_tmo triggers after this point, we missed a SCSI trace. workqueue fc_dl_<host> ================== 27 fc_timeout_fail_rport_io fc_terminate_rport_io zfcp_scsi_terminate_rport_io zfcp_erp_port_forced_reopen _zfcp_erp_port_forced_reopen if (port.status & ERP_FAILED) return; Therefore, write a trace before above early return. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : sctrpi1 SCSI terminate rport I/O LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> D_ID : 0x<n_port_id> Adapter status : 0x... Port status : 0x... LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xe0 ZFCP_ERP_ACTION_FAILED Signed-off-by: Steffen Maier <maier@linux.ibm.com> Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early returnSteffen Maier
commit 96d9270499471545048ed8a6d7f425a49762283d upstream. get_device() and its internally used kobject_get() only return NULL if they get passed NULL as argument. zfcp_get_port_by_wwpn() loops over adapter->port_list so the iteration variable port is always non-NULL. Struct device is embedded in struct zfcp_port so &port->dev is always non-NULL. This is the argument to get_device(). However, if we get an fc_rport in terminate_rport_io() for which we cannot find a match within zfcp_get_port_by_wwpn(), the latter can return NULL. v2.6.30 commit 70932935b61e ("[SCSI] zfcp: Fix oops when port disappears") introduced an early return without adding a trace record for this case. Even if we don't need recovery in this case, for debugging we should still see that our callback was invoked originally by scsi_transport_fc. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : sctrpin SCSI terminate rport I/O, no zfcp port LUN : 0xffffffffffffffff none (invalid) WWPN : 0x<wwpn> WWPN D_ID : 0x<n_port_id> N_Port-ID Adapter status : 0x... Port status : 0xffffffff unknown (-1) LUN status : 0x00000000 none (invalid) Ready count : 0x... Running count : 0x... ERP want : 0x03 ZFCP_ERP_ACTION_REOPEN_PORT_FORCED ERP need : 0xc0 ZFCP_ERP_ACTION_NONE Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 70932935b61e ("[SCSI] zfcp: Fix oops when port disappears") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix misleading REC trigger trace where erp_action setup failedSteffen Maier
commit 512857a795cbbda5980efa4cdb3c0b6602330408 upstream. If a SCSI device is deleted during scsi_eh host reset, we cannot get a reference to the SCSI device anymore since scsi_device_get returns !=0 by design. Assuming the recovery of adapter and port(s) was successful, zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the half-gone SCSI device. Unfortunately, it causes the following confusing trace record which states that zfcp will do a LUN recovery as "ERP need" is ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want". Old example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING but not ZFCP_STATUS_COMMON_UNBLOCKED as it was closed on close part of adapter reopen ERP want : 0x01 ERP need : 0x01 misleading However, zfcp_erp_setup_act() returns NULL as it cannot get the reference. Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery actually happens. We always do want the recovery trigger trace record even if no erp_action could be enqueued as in this case. For other cases where we did not enqueue an erp_action, 'need' has always been zero to indicate this. In order to indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP need" as 'not needed' but still keep the information which erp_action type, that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to be visibly different from 0x0_ in "ERP want". New example trace record formatted with zfcpdbf from s390-tools: Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ERP want : 0x01 ERP need : 0xc1 would need LUN ERP, but no action set up ^ Before v2.6.38 commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") we could detect this case because the "erp_action" field in the trace was NULL. The rework removed erp_action as argument and field from the trace. This patch here is for tracing. A fix to allow LUN recovery in the case at hand is a topic for a separate patch. See also commit fdbd1c5e27da ("[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference") for a similar case and background info. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMFSteffen Maier
commit 81979ae63e872ef650a7197f6ce6590059d37172 upstream. We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of our eh callback and an actual send/recv of an abort / TMF request. In order to see the temporal sequence including any abort / TMF send retries, add a trace before the above two blocking functions. This supports problem determination with scsi_eh and parallel zfcp ERP. No need to explicitly trace the beginning of our eh callback, since we typically can send an abort / TMF and see its HBA response (in the worst case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes almost the beginning of the callback. No need to explicitly trace the wakeup after the above two blocking functions because the next retry loop causes another trace in any case and that is sufficient. Example trace records formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : abrt_wt abort, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x<scsi_result_of_cmd_to_be_aborted> SCSI retries : 0x<retries_of_cmd_to_be_aborted> SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted> SCSI scribble : 0x<req_id_of_cmd_to_be_aborted> SCSI opcode : <CDB_of_cmd_to_be_aborted> FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : lr_wait LUN reset, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x... unrelated SCSI retries : 0x.. unrelated SCSI allowed : 0x.. unrelated SCSI scribble : 0x... unrelated SCSI opcode : ... unrelated FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 63caf367e1c9 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp") Fixes: af4de36d911a ("[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>