summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-05-14drm/msm/mdp5: Fix iteration on INTF config arrayStephane Viau
The current iteration in get_dsi_id_from_intf() is wrong: instead of iterating until hw_cfg->intf.count, we need to iterate until MDP5_INTF_NUM_MAX here. Let's take the example of msm8x16: hw_cfg->intf.count = 1 intfs[0] = INTF_Disabled intfs[1] = INTF_DSI If we stop iterating once i reaches hw_cfg->intf.count (== 1), we will miss the test for intfs[1]. Actually, this hw_cfg->intf.count entry is quite confusing and is not (or *should not be*) used anywhere else; let's remove it. Signed-off-by: Stephane Viau <sviau@codeaurora.org>
2015-05-14drm/msm/dsi: Fixup missing *break* statement during cmd rxHai Li
Signed-off-by: Hai Li <hali@codeaurora.org>
2015-05-14drm/msm/dp: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
2015-05-14drm: msm: Fix build when legacy fbdev support isn't setArchit Taneja
The DRM_KMS_FB_HELPER config is selected only when DRM_MSM_FBDEV config is selected. The driver accesses drm_fb_helper_* functions even when legacy fbdev support is disabled in msm. Wrap around these functions with #ifdef checks to prevent build break. Signed-off-by: Archit Taneja <architt@codeaurora.org>
2015-05-14drm/msm/dsi: Fix a couple more 64-bit build warningsStephane Viau
Avoid such errors at compilation time: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' Signed-off-by: Stephane Viau <sviau@codeaurora.org>
2015-05-14drm/msm: Fix a couple of 64-bit build warningsThierry Reding
Avoid casts from pointers to fixed-size integers to prevent the compiler from warning. Print virtual memory addresses using %p instead. Also turn a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings due to mismatched format strings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2015-05-14firmware: dmi_scan: Fix ordering of product_uuidJean Delvare
In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: stable@vger.kernel.org [v3.10+]
2015-05-14firmware: dmi_scan: Simplified displayed versionJean Delvare
The trailing .x adds no information for the reader, and if anyone tries to parse that line, this is more work as they have 3 different formats to handle instead of 2. Plus, this makes backporting fixes harder. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 95be58df74a5 ("firmware: dmi_scan: Use full dmi version for SMBIOS3") Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
2015-05-13Bluetooth: ath3k: add support of 04ca:300f AR3012 deviceDmitry Tunin
BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-13Bluetooth: btusb: Add support for 0cf3:e007Wen-chien Jesse Sung
Device 0cf3:e007 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-13Bluetooth: ath3k: Add a new ID 0cf3:e006 to ath3k listWen-chien Jesse Sung
Device info in /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e006 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-13Merge tag 'iio-fixes-for-4.1a-take2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The usual mixed bag of fixes for IIO in the 4.1 cycle. Second version of this pull request as a small fix to a fix turned up before Greg pulled it for a cc10001 patch near the top of the tree. One core fix * Set updated for a iio kfifo was incorrectly set to false during a failed update, resulting in atttempts to repeat the failed operation appearing to succeed. This time I've decided to list the driver fixes in alphabetical order rather than 'randomly'. * axp288_adc - a recent change added a check for valid info masks when reading channels from consumer drivers. * bmp280 - temperature compensation was failing to read the tfine value, hence causing a temperature of 0 to always be returned and incorrect presure measurements. * cc10001 - Fix channel number mapping when some channels are reserved for remote CPUs. Fix an issue with the use of the power-up/power-down register (basically wrong polarity). Fix an issue due to the missinterpretting the return value from regulator_get_voltage. Add a delay before the start bit as recommended for the hardware to avoid data corruption. * hid pressure - fix channel spec of modfiied, but no modifier (which makes no sense!) * hid proximity - fix channel spec of modified, but no modifier (which makes no sense!). Fix a memory leak in the probe function. * mcp320x - occasional incorrect readings on dma using spi busses due to cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. * mma9551 - buffer overrun fix (miss specified maximum length of buffers) * mma9553 - endian fix on status message. Add an enable element for activity channel. Input checking for activity period to avoid rather unpredictable results. * spmi-vadc - fix an overflow in the output value normalization seen on some boards. * st-snesors - oops due to use of a mutex that is not yet initialized during probe. * xilinx adc - Some wrong register addresses, a wrong address for vccaux channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13Input: elantech - fix semi-mt protocol for v3 HWBenjamin Tissoires
When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13Input: sx8654 - fix memory allocation checkDmitry Torokhov
We have been testing wrong variable when trying to make sure that input allocation succeeded. Reported by Coverity (CID 1295918). Acked-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13nvme: fix kernel memory corruption with short INQUIRY buffersChristoph Hellwig
If userspace asks for an INQUIRY buffer smaller than 36 bytes, the SCSI translation layer will happily write past the end of the INQUIRY buffer allocation. This is fairly easily reproducible by running the libiscsi test suite and then starting an xfstests run. Fixes: 4f1982 ("NVMe: Update SCSI Inquiry VPD 83h translation") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-13HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switchLaura Abbott
Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-13irqchip: tegra: Set the proper base address in irq chip dataLucas Stach
The irq chip functions use the irq chipdata directly as the base register address of the controller, so this should be passed in instead of a pointer to the array address holding the base address. This fixes Tegra20 CPUidle as now the un-/masking of IRQs at the LIC level works again, but more importantly it fixes the resulting memory corruption. Fixes: de3ce0804916 ' irqchip: tegra: Add DT-based support for legacy interrupt controller' Signed-off-by: Lucas Stach <dev@lynxeye.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1431202014-3136-1-git-send-email-dev@lynxeye.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-13s390/zcrypt: Fix invalid domain handling during ap module unloadIngo Tuchscherer
Added domain checking to prevent reset failures caused by invalid domains. Corrected removal sequence of bus attributes and device. Reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Handle max TX power properly wrt VIFs and the MAC in iwlwifi, from Avri Altman. 2) Use the correct FW API for scan completions in iwlwifi, from Avraham Stern. 3) FW monitor in iwlwifi accidently uses unmapped memory, fix from Liad Kaufman. 4) rhashtable conversion of mac80211 station table was buggy, the virtual interface was not taken into account. Fix from Johannes Berg. 5) Fix deadlock in rtlwifi by not using a zero timeout for usb_control_msg(), from Larry Finger. 6) Update reordering state before calculating loss detection, from Yuchung Cheng. 7) Fix off by one in bluetooth firmward parsing, from Dan Carpenter. 8) Fix extended frame handling in xiling_can driver, from Jeppe Ledet-Pedersen. 9) Fix CODEL packet scheduler behavior in the presence of TSO packets, from Eric Dumazet. 10) Fix NAPI budget testing in fm10k driver, from Alexander Duyck. 11) macvlan needs to propagate promisc settings down the the lower device, from Vlad Yasevich. 12) igb driver can oops when changing number of rings, from Toshiaki Makita. 13) Source specific default routes not handled properly in ipv6, from Markus Stenberg. 14) Use after free in tc_ctl_tfilter(), from WANG Cong. 15) Use softirq spinlocking in netxen driver, from Tony Camuso. 16) Two ARM bpf JIT fixes from Nicolas Schichan. 17) Handle MSG_DONTWAIT properly in ring based AF_PACKET sends, from Mathias Kretschmer. 18) Fix x86 bpf JIT implementation of FROM_{BE16,LE16,LE32}, from Alexei Starovoitov. 19) ll_temac driver DMA maps TX packet header with incorrect length, fix from Michal Simek. 20) We removed pm_qos bits from netdevice.h, but some indirect references remained. Kill them. From David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) net: Remove remaining remnants of pm_qos from netdevice.h e1000e: Add pm_qos header net: phy: micrel: Fix regression in kszphy_probe net: ll_temac: Fix DMA map size bug x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions netns: return RTM_NEWNSID instead of RTM_GETNSID on a get Update be2net maintainers' email addresses net_sched: gred: use correct backlog value in WRED mode pppoe: drop pppoe device in pppoe_unbind_sock_work net: qca_spi: Fix possible race during probe net: mdio-gpio: Allow for unspecified bus id af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT). bnx2x: limit fw delay in kdump to 5s after boot ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits. ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction. mpls: Change reserved label names to be consistent with netbsd usbnet: avoid integer overflow in start_xmit netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2) net: xgene_enet: Set hardware dependency net: amd-xgbe: Add hardware dependency ...
2015-05-12e1000e: Add pm_qos headerDavid Ahern
Commit e2c6544829f moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12net: phy: micrel: Fix regression in kszphy_probeNiklas Cassel
Don't do clock-mode-select if clk == NULL, since when building without CONFIG_HAVE_CLK, clk_get returns NULL and clk_get_rate returns 0. Doing clock-mode-select in this cause causes kszphy_probe to return -EINVAL and thus prevents the device from being probed. The original code (before regression) would return 0 when building without CONFIG_HAVE_CLK. Cc: stable <stable@vger.kernel.org> # 3.18+ Fixes: 1fadee0c3645 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031") Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Niklas Cassel <niklass@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12net: ll_temac: Fix DMA map size bugMichal Simek
DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - update MAINTAINERS git repo pointer - printk garbage fix - fix for qib and iw_cxgb4 bugs introduced in 4.1 window - fix for an older iWARP netlink bug - fix a memcpy issue in ehca driver * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses IB/qib: fix test of unsigned variable RDMA/core: Fix for parsing netlink string attribute MAINTAINERS: update the official rdma git repo iw_cxgb4: use wildcard mapping for getting remote addr info IB/ehca: use correct destination for memcpy
2015-05-12Merge tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull power supply and reset fixes from Sebastian Reichel: "misc fixes" * tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6: power: bq27x00_battery: Add missing MODULE_ALIAS power: reset: Add MFD_SYSCON depends for brcmstb power: reset: ltc2952: Remove bogus hrtimer_start() return value checks power_supply: fix oops in collie_battery driver power/reset: at91: fix return value check in at91_reset_platform_probe() MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers axp288_fuel_gauge: Add original author details
2015-05-13Revert "ACPICA: Permanently set _REV to the value '2'."Rafael J. Wysocki
Revert commit b1ef29725865 (ACPICA: Permanently set _REV to the value '2'.) as it causes a sound regression to happen on Dell XPS 13 (2015). Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-12infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> usesJoe Perches
These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause bad logging output so remove them. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12iio: light: hid-sensor-prox: Fix memory leak in probe()Fabio Estevam
'channels' is allocated via kmemdup and it is never freed. Use 'indio_dev->channels' directly instead, so that we avoid such memory leak problem. Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Add delay before setting START bitNaidu Tellapati
According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Fix regulator_get_voltage() return value checkNaidu Tellapati
regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Fix incorrect use of power-up/power-down registerNaidu Tellapati
At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12IB/qib: fix test of unsigned variableMike Marciniszyn
Commit d4988623cc60 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12RDMA/core: Fix for parsing netlink string attributeTatyana Nikolova
The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Cc: <stable@vger.kernel.org> #v3.16 Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handlingChristian König
The mapping range is inclusive between starting and ending addresses. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-05-12HID: hid-sensor-hub: Fix debug lock warningSrinivas Pandruvada
When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and warned for (l->magic != l), here l is the address of mutex pointer. In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is initialized during MFD cell creation. This hsdev, which contains, mutex is part of platform data for the a cell. But platform_data is copied in platform_device_add_data() in platform.c. This copy will copy the whole hsdev structure including mutex. But once copied the magic will no longer match. So when client driver call sensor_hub_input_attr_get_raw_value, this will trigger mutex warning. So to avoid this allocate mutex dynamically. This will be same even after copy. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-11iw_cxgb4: use wildcard mapping for getting remote addr infoSteve Wise
For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11IB/ehca: use correct destination for memcpyNicholas Mc Guire
Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11Merge tag 'spi-fix-v4.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A number of driver specific fixes (including several missing dependencies for randconfig type cases) plus two core fixes. One makes the setup_transfer() callback optional which unbreaks some drivers which had been merged with it omitted due to local versions of this patch and another ensures that we don't corrupt data by leaking internal dummy buffers to callers, causing the callers to think they allocated those buffers" * tag 'spi-fix-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-espi: fix behaviour for full-duplex xfers spi: fsl-spi: fix devm_ioremap_resource() error case spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence spi/omap2-mcpsi: Always call spi_finalize_current_message() spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1 spi: bitbang: Make setup_transfer() callback optional spi: check tx_buf and rx_buf in spi_unmap_msg spi: bcm2835: change timeout of polling driver to 1s spi: bcm2835: Add GPIOLIB dependency
2015-05-11Merge tag 'iommu-fixes-v4.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Three fixes have queued up: - reference count fix in the AMD IOMMUv2 driver - sign extension fix in the ARM-SMMU driver - build fix for rockchip driver with device tree" * tag 'iommu-fixes-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1 iommu/rockchip: Fix build without CONFIG_OF iommu/amd: Fix bug in put_pasid_state_wait
2015-05-11Merge branch 'for-4.1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Rather big for fixes pull. - SCC controllers never lived to see the light of the day. Both libata and ide drivers removed. - In some configurations, link power management policy changes sometimes cause delayed spurious PHY events which can develop into noticeable failures. This has been reported several times over the years. Gabriele's patches suppress PHY events for a while after LPM policy changes which should help most of these failures without causing too much problem for hotplug use cases. - A few controller specific fixes" [ Hmm. I don't think removing SSC support is really a "fix", but hey, it removes a lot of lines of code. Which I like. So ... good riddance ] * 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: avoton port-disable reset-quirk ata: select DW_DMAC in case of SATA_DWC libata: Blacklist queued TRIM on all Samsung 800-series libata: Ignore spurious PHY event on LPM policy change libata: Add helper to determine when PHY events should be ignored ata: ahci_st: fixup layering violations / drvdata errors Remove celleb-only SCC PATA drivers
2015-05-11Merge tag 'md/4.1-rc3-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "A few fixes for md. Most of these are related to the new "batched stripe writeout", but there are a few others" * tag 'md/4.1-rc3-fixes' of git://neil.brown.name/md: md/raid5: fix handling of degraded stripes in batches. md/raid5: fix allocation of 'scribble' array. md/raid5: don't record new size if resize_stripes fails. md/raid5: avoid reading parity blocks for full-stripe write to degraded array md/raid5: more incorrect BUG_ON in handle_stripe_fill. md/raid5: new alloc_stripe() to allocate an initialize a stripe. md-raid0: conditional mddev->queue access to suit dm-raid
2015-05-11pppoe: drop pppoe device in pppoe_unbind_sock_workFelix Fietkau
After receiving a PADT and the socket is closed, user space will no longer drop the reference to the pppoe device. This leads to errors like this: [ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2 Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11lpfc: Fix breakage on big endian kernelsAlexey Kardashevskiy
This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel. Without this, the kernel enters an infinite oops loop. This is the hardware used for verification: 0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) 0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11storvsc: Set the SRB flags correctly when no data transfer is neededK. Y. Srinivasan
Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1Will Deacon
Stage 1 translation is controlled by two sets of page tables (TTBR0 and TTBR1) which grow up and down from zero respectively in the ARMv8 translation regime. For the SMMU, we only care about TTBR0 and, in the case of a 48-bit virtual space, we expect to map virtual addresses 0x0 through to 0xffff_ffff_ffff. Given that some masters may be incapable of emitting virtual addresses targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU architecture allows bit 47 to be sign-extended, halving the virtual range of TTBR0 but allowing TTBR1 to be used. This is controlled by the SEP field in TTBCR2. The SMMU driver incorrectly enables this sign-extension feature, which causes problems when userspace addresses are programmed into a master device with the SMMU expecting to map the incoming transactions via TTBR0; if the top bit of address is set, we will instead get a translation fault since TTBR1 walks are disabled in the TTBCR. This patch fixes the issue by disabling sign-extension of a fixed virtual address bit and instead basing the behaviour on the upstream bus size: the incoming address is zero extended unless the upstream bus is only 49 bits wide, in which case bit 48 is used as the sign bit and is replicated to the upper bits. Cc: <stable@vger.kernel.org> # v4.0+ Reported-by: Varun Sethi <varun.sethi@freescale.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-11Merge remote-tracking branches 'spi/fix/fsl-cpm', 'spi/fix/fsl-dspi' and ↵Mark Brown
'spi/fix/fsl-espi' into spi-linus
2015-05-11Merge tag 'spi-v4.1-rc1' into spi-linusMark Brown
spi: Fixes for v4.1 A few driver fixes plus two changes for the core, one to make the setup_transfer() callback optional which fixes crashes in some drivers which were updated to use new interfaces without apparent testing and one to ensure we don't expose the data buffers we use for dummy transfers to drivers which avoids potential issues with multiple accesses to them or reuse. # gpg: Signature made Sat 25 Apr 2015 10:59:47 BST using RSA key ID 5D5487D0 # gpg: key CD7BEEBC: no public key for trusted key - skipped # gpg: key CD7BEEBC marked as ultimately trusted # gpg: key AF88CD16: no public key for trusted key - skipped # gpg: key AF88CD16 marked as ultimately trusted # gpg: key 16005C11: no public key for trusted key - skipped # gpg: key 16005C11 marked as ultimately trusted # gpg: key 5621E907: no public key for trusted key - skipped # gpg: key 5621E907 marked as ultimately trusted # gpg: key 5C6153AD: no public key for trusted key - skipped # gpg: key 5C6153AD marked as ultimately trusted # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-05-11net: qca_spi: Fix possible race during probeStefan Wahren
Registering the netdev before setting the priv data is unsafe. So fix this possible race by setting the priv data first. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: <stable@vger.kernel.org> # v3.18+ Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11drm/i915: Avoid GPU hang when coming out of s3 or s4Peter Antoine
This patch fixes a timing issue that causes a GPU hang when the system comes out of power saving. During pm_resume, We are submitting batchbuffers before enabling Interrupts this is causing us to miss the context switch interrupt, and in consequence intel_execlists_handle_ctx_events is not triggered. This patch is based on a patch from Deepak S <deepak.s@intel.com> from another platform. The patch fixes an issue introduced by: commit e7778be1eab918274f79603d7c17b3ec8be77386 drm/i915: Fix startup failure in LRC mode after recent init changes The above patch added a call to init_context() to fix an issue introduced by a previous patch. But, it then opened up a small timing window for the batches being added by the init_context (basically setting up the context) to complete before the interrupts have been turned on, thus hanging the GPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89600 Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: fixed typo in subject, massaged the comments a bit] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-05-10net: mdio-gpio: Allow for unspecified bus idBert Vermeulen
When the bus id was supplied via a struct platform_device, the driver wasn't handling -1 to mean an unspecified id of the only instance of this driver, as the platform spec requires. Signed-off-by: Bert Vermeulen <bert@biot.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10bnx2x: limit fw delay in kdump to 5s after bootMichal Schmidt
Commit 12a8541d5c82 "bnx2x: Delay during kdump load" added a 5 seconds delay to bnx2x's probe function in the kdump case to let the firmware realize the old driver is gone. The problem with the delay is that it is per-device, so if you have several bnx2x NICs in NPAR mode, the delays can accumulate to minutes. Fix it by adjusting the delay so that we do not wait more than necessary, i.e. no more delaying after 5 seconds of kernel boot time. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:03:56 +0000