| Age | Commit message (Collapse) | Author |
|---|
|
commit 505b730ede7f5c4083ff212aa955155b5b92e574 upstream.
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ee124caae1b0defd0e02c65686f539845a3ac9b upstream.
Commit 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid
state") intended to allow some state transitions that were not allowed
before. The idea is sane and back then I also got the code comment
right, but the check for enabled is bogus. This resulted in state
transitions for enabled states to be allowed to have invalid duty/period
settings and thus it can happen that low-level drivers get requests for
invalid states🙄.
Invert the check to allow state transitions for disabled states only.
Fixes: 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid state")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172416.626433-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93712205ce2f1fb047739494c0399a26ea4f0890 upstream.
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c17fb542dbd1db745c9feac15617056506dd7195 upstream.
The commit message of commit 6ec1f0239485 ("md/md-bitmap: fix stats
collection for external bitmaps") states:
Remove the external bitmap check as the statistics should be
available regardless of bitmap storage location.
Return -EINVAL only for invalid bitmap with no storage (neither in
superblock nor in external file).
But, the code does not adhere to the above, as it does only check for
a valid super-block for "internal" bitmaps. Hence, we observe:
Oops: GPF, probably for non-canonical address 0x1cd66f1f40000028
RIP: 0010:bitmap_get_stats+0x45/0xd0
Call Trace:
seq_read_iter+0x2b9/0x46a
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6d/0xf0
do_syscall_64+0x8c/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
We fix this by checking the existence of a super-block for both the
internal and external case.
Fixes: 6ec1f0239485 ("md/md-bitmap: fix stats collection for external bitmaps")
Cc: stable@vger.kernel.org
Reported-by: Gerald Gibson <gerald.gibson@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://lore.kernel.org/linux-raid/20250702091035.2061312-1-haakon.bugge@oracle.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95a234f6affbf51f06338383537ab80d637bb785 upstream.
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference.
Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa332f5dc6fc662ad7d3200048772c96b861cf6b upstream.
The "intf" list iterator is an invalid pointer if the correct
"intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on
and invalid pointer will lead to memory corruption.
We don't really need to call atomic_dec() if we haven't called
atomic_add_return() so update the if (intf->in_shutdown) path as well.
Fixes: 8e76741c3d8b ("ipmi: Add a limit on the number of users that may use IPMI")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <aBjMZ8RYrOt6NOgi@stanley.mountain>
Signed-off-by: Corey Minyard <corey@minyard.net>
[ - Dropped change to the `if (intf->in_shutdown)` block since that logic
doesn't exist yet.
- Modified out_unlock to release the srcu lock instead of the mutex
since we don't have the mutex here yet. ]
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
skb_shared_info
[ Upstream commit 02c4d6c26f1f662da8885b299c224ca6628ad232 ]
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dfe110cc0f6ef42af8e81ce52aef34a647d0b8a ]
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0713e55533c88a20edb53eea6517dc56786a0078 ]
Override the hardware strap configuration for MDI-X mode to ensure a
predictable initial state for the driver. The initial mode of the LAN87xx
PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no
documented way to read its latched status.
This unpredictability means the driver cannot know if the PHY has
initialized with Auto-MDIX enabled or disabled, preventing it from
providing a reliable interface to the user.
This patch introduces a `config_init` hook that forces the PHY into a
known state by explicitly enabling Auto-MDIX.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a141af8eb2272ab0f677a7f2653874840bc9b214 ]
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78b7920a03351a8402de2f81914c1d2e2bdf24b7 ]
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
in level-triggered mode. However, in this configuration, the DMA does not
assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
This creates a functional regression where the condition
if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
never evaluate to true, preventing proper interrupt handling for
level-triggered mode. The hardware specification explicitly states that
"The DMA does not assert the NIS status bit for the Rx or Tx interrupt
events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
The fix ensures correct handling of both edge and level-triggered
interrupts while maintaining backward compatibility with existing
configurations. It has been tested on the hardware device (not publicly
available), and it can properly trigger the RX and TX interrupt handling
in both the INTM=0 and INTM=2 configurations.
Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Tested-by: EricChan <chenchuangyu@xiaomi.com>
Signed-off-by: EricChan <chenchuangyu@xiaomi.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ab9ada765b7acb5cd02fe27632ec2586b7868ee ]
The previous commit unintentionally removed the code responsible for
enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
(WoL) support for the QCA808X PHY is no longer functional.
The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
register 0x8012, BIT5. This implementation is aligned with the approach
used in at8031_set_wol().
Fixes: e58f30246c35 ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-2-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e31cf3cce2102af984656fed6e2254cbdd46da02 ]
Move the WoL (Wake-on-LAN) functionality to a shared library to enable
its reuse by the QCA808X PHY driver, incorporating support for WoL
functionality similar to the implementation in at8031_set_wol().
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-1-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4ab9ada765b7 ("net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
CONFIG_RFS_ACCEL
[ Upstream commit b9fd9888a5654e59f6c6249337e36c53c1faa329 ]
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ff4fb276e2384a87ae7f65f3c28e1e139dbb3fe ]
soc-button-array hardcodes a debounce value by means of gpio_keys
which uses pinctrl-amd as a backend to program debounce for a GPIO.
This hardcoded value doesn't match what the firmware intended to be
programmed in _AEI. The hardcoded debounce leads to problems waking
from suspend. There isn't appetite to conditionalize the behavior in
soc-button-array or gpio-keys so clear it when the system suspends to
avoid problems with being able to resume.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hansg@kernel.org>
Fixes: 5c4fa2a6da7fb ("Input: soc_button_array - debounce the buttons")
Link: https://lore.kernel.org/linux-input/mkgtrb5gt7miyg6kvqdlbu4nj3elym6ijudobpdi26gp4xxay5@rsa6ytrjvj2q/
Link: https://lore.kernel.org/linux-input/20250625215813.3477840-1-superm1@kernel.org/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/20250627150155.3311574-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb2c93e7028b4c9fe4761734d65ee40712d1c242 ]
irq-msi-lib directly uses struct msi_domain_info and more things which are
only available when CONFIG_GENERIC_MSI_IRQ=y.
However, there is no dependency specified and CONFIG_IRQ_MSI_LIB can be
enabled without CONFIG_GENERIC_MSI_IRQ, which causes the kernel build fail.
Make IRQ_MSI_LIB select GENEREIC_MSI_IRQ to prevent that.
Fixes: 72e257c6f058 ("irqchip: Provide irq-msi-lib")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/b0c44007f3b7e062228349a2395f8d850050db33.1751277765.git.namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506282256.cHlEHrdc-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Priority Inversion in SRIOV
commit dc0297f3198bd60108ccbd167ee5d9fa4af31ed0 upstream.
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] <TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.017057] amdgpu_pci_probe+0x1c2/0x660 [amdgpu]
[ 253.017493] local_pci_probe+0x4b/0xb0
[ 253.017746] work_for_cpu_fn+0x1a/0x30
[ 253.017995] process_one_work+0x21e/0x680
[ 253.018248] worker_thread+0x190/0x330
[ 253.018500] ? __pfx_worker_thread+0x10/0x10
[ 253.018746] kthread+0xe7/0x120
[ 253.018988] ? __pfx_kthread+0x10/0x10
[ 253.019231] ret_from_fork+0x3c/0x60
[ 253.019468] ? __pfx_kthread+0x10/0x10
[ 253.019701] ret_from_fork_asm+0x1a/0x30
[ 253.019939] </TASK>
v2: s/spin_trylock/spin_lock_irqsave to be safe (Christian).
Fixes: e864180ee49b ("drm/amdgpu: Add lock around VF RLCG interface")
Cc: lin cao <lin.cao@amd.com>
Cc: Jingwen Chen <Jingwen.Chen2@amd.com>
Cc: Victor Skvortsov <victor.skvortsov@amd.com>
Cc: Zhigang Luo <zhigang.luo@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Minor context change fixed. ]
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f6dd741cdcdadb9e125cc66d4fcfbe5ab92d36a upstream.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25f602fbbcc8271f6e72211b54808ba21e677762 upstream.
vega10/vega12/vega20/raven/raven2/picasso/arcturus/aldebaran
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b846350aa272de99bf6fecfa6b08e64ebfb13173 upstream.
If there's support for another console device (such as a TTY serial),
the kernel occasionally panics during boot. The panic message and a
relevant snippet of the call stack is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000
Call trace:
drm_crtc_handle_vblank+0x10/0x30 (P)
decon_irq_handler+0x88/0xb4
[...]
Otherwise, the panics don't happen. This indicates that it's some sort
of race condition.
Add a check to validate if the drm device can handle vblanks before
calling drm_crtc_handle_vblank() to avoid this.
Cc: stable@vger.kernel.org
Fixes: 96976c3d9aff ("drm/exynos: Add DECON driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit d8010d4ba43e9f790925375a7de100604a5e2dba upstream.
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 099cf1fbb8afc3771f408109f62bdec66f85160e upstream.
The deadlock can occur due to a recursive lock acquisition of
`cros_typec_altmode_data::mutex`.
The call chain is as follows:
1. cros_typec_altmode_work() acquires the mutex
2. typec_altmode_vdm() -> dp_altmode_vdm() ->
3. typec_altmode_exit() -> cros_typec_altmode_exit()
4. cros_typec_altmode_exit() attempts to acquire the mutex again
To prevent this, defer the `typec_altmode_exit()` call by scheduling
it rather than calling it directly from within the mutex-protected
context.
Cc: stable <stable@kernel.org>
Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250624133246.3936737-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f30f946f27b7f044cf8f3f1f353dee1dcd3517a upstream.
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9110056fe10b0519529bdbbac37311a5037ea0c2 upstream.
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dab34ca77293b409c3223636dde915a22656748 upstream.
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 964209202ebe1569c858337441e87ef0f9d71416 upstream.
PL1 cannot be disabled on some platforms. The ENABLE bit is still set
after software clears it. This behavior leads to a scenario where, upon
user request to disable the Power Limit through the powercap sysfs, the
ENABLE bit remains set while the CLAMPING bit is inadvertently cleared.
According to the Intel Software Developer's Manual, the CLAMPING bit,
"When set, allows the processor to go below the OS requested P states in
order to maintain the power below specified Platform Power Limit value."
Thus this means the system may operate at higher power levels than
intended on such platforms.
Enhance the code to check ENABLE bit after writing to it, and stop
further processing if ENABLE bit cannot be changed.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2d281d8196e3 ("PowerCap: Introduce Intel RAPL power capping driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250619071340.384782-1-rui.zhang@intel.com
[ rjw: Use str_enabled_disabled() instead of open-coded equivalent ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62e062a29ad5133f67c20b333ba0a952a99161ae upstream.
When two masters share an IOMMU, calling ops->of_xlate during
the second master's driver init may overwrite iommu->domain set
by the first. This causes the check if (iommu->domain == domain)
in rk_iommu_attach_device() to fail, resulting in the same
iommu->node being added twice to &rk_domain->iommus, which can
lead to an infinite loop in subsequent &rk_domain->iommus operations.
Cc: <stable@vger.kernel.org>
Fixes: 25c2325575cc ("iommu/rockchip: Add missing set_platform_dma_ops callback")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 312d02adb959ea199372f375ada06e0186f651e4 upstream.
The OP-TEE driver registers the function notif_callback() for FF-A
notifications. However, this function is called in an atomic context
leading to errors like this when processing asynchronous notifications:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0-00019-g657536ebe0aa #13
| Hardware name: linux,dummy-virt (DT)
| Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x78/0x90
| dump_stack+0x18/0x24
| __might_resched+0x114/0x170
| __might_sleep+0x48/0x98
| mutex_lock+0x24/0x80
| optee_get_msg_arg+0x7c/0x21c
| simple_call_with_arg+0x50/0xc0
| optee_do_bottom_half+0x14/0x20
| notif_callback+0x3c/0x48
| handle_notif_callbacks+0x9c/0xe0
| notif_get_and_handle+0x40/0x88
| generic_exec_single+0x80/0xc0
| smp_call_function_single+0xfc/0x1a0
| notif_pcpu_irq_work_fn+0x2c/0x38
| process_one_work+0x14c/0x2b4
| worker_thread+0x2e4/0x3e0
| kthread+0x13c/0x210
| ret_from_fork+0x10/0x20
Fix this by adding work queue to process the notification in a
non-atomic context.
Fixes: d0476a59de06 ("optee: ffa_abi: add asynchronous notifications")
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250602120452.2507084-1-jens.wiklander@linaro.org
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cee4392a57e14a799fbdee193bc4c0de65b29521 upstream.
Some varieties of this device don't work with
RESET_RESUME alone.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d30048958e0d43425f6d4e76565e6249fa71050 upstream.
The i2c_dw_xfer_init() function requires msgs and msg_write_idx from the
dev context to be initialized.
amd_i2c_dw_xfer_quirk() inits msgs and msgs_num, but not msg_write_idx.
This could allow an out of bounds access (of msgs).
Initialize msg_write_idx before calling i2c_dw_xfer_init().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250627143511.489570-1-michael.j.ruhl@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b95a7db6e0f75587bffddbb490399cbb87e4985 upstream.
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b18405763c1ebb1efc15feef5563c9cdb2cc3a7 upstream.
The device link to the USB4 host interface has to be removed
manually since it's no longer auto removed.
Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links")
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31a6afbe86e8e9deba9ab53876ec49eafc7fd901 upstream.
Shawn and John reported a hang issue during system suspend as below:
- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)
The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.
The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.
To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reported-by: John Ernberg <john.ernberg@actia.se>
Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 630a1dec3b0eba2a695b9063f1c205d585cbfec9 upstream.
When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected. Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.
Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2831a81077f5162f104ba5a97a7d886eb371c21c upstream.
The SSP2 controller has extra endpoint state preserve bit (ESP) which
setting causes that endpoint state will be preserved during
Halt Endpoint command. It is used only for EP0.
Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test"
failed.
Setting this bit doesn't have any impact for SSP controller.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95382CCD50549DABAEFD6156DD7CA@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e2c421ef88e9da9c39e01496b7f5b0b354b42bc upstream.
It doesn't need to do it, and the related command event returns
'Slot Not Enabled Error' status.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Hongliang Yang <hongliang.yang@cixtech.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://lore.kernel.org/r/20250619013413.35817-1-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63f4970a1219b5256e8ea952096c86dab666d312 upstream.
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22c69d786ef8fb789c61ca75492a272774221324 upstream.
Add the NGR 200 Xbox 360 to the list of recognized controllers.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250608060517.14967-1-niltonperimneto@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd65ee81240e8bc3c3119b46db7f60c80864b90b upstream.
Disable stream for platform xHC controller with broken stream.
Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable")
Cc: stable <stable@kernel.org>
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit efe3e3ae5a66cb38ef29c909e951b4039044bae9 upstream.
Flush dbc requests when dbc is stopped and transfer rings are freed.
Failure to flush them lead to leaking memory and dbc completing odd
requests after resuming from suspend, leading to error messages such as:
[ 95.344392] xhci_hcd 0000:00:0d.0: no matched request
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b857d69a5e116150639a0c6c39c86cc329939ee upstream.
When /dev/ttyDBC0 device is created then by default ECHO flag
is set for the terminal device. However if data arrives from
a peer before application using /dev/ttyDBC0 applies its set
of terminal flags then the arriving data will be echoed which
might not be desired behavior.
Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable <stable@kernel.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/stable/20250610111802.18742-1-ukaszb%40chromium.org
Link: https://lore.kernel.org/r/20250627144127.3889714-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbc889ab0122366f6cdbe3c28d477c683ebcebc2 upstream.
During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable <stable@kernel.org>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7aed15379db9c6ec67999cdaf5c443b7be06ea73 upstream.
This reverts commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c.
Commit 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state()
helper") was introduced to workaround watchdog timeout issues on some
platforms, allowing xhci_reset() to bail out early without waiting
for the reset to complete.
Skipping the xhci handshake during a reset is a dangerous move. The
xhci specification explicitly states that certain registers cannot
be accessed during reset in section 5.4.1 USB Command Register (USBCMD),
Host Controller Reset (HCRST) field:
"This bit is cleared to '0' by the Host Controller when the reset
process is complete. Software cannot terminate the reset process
early by writinga '0' to this bit and shall not write any xHC
Operational or Runtime registers until while HCRST is '1'."
This behavior causes a regression on SNPS DWC3 USB controller with
dual-role capability. When the DWC3 controller exits host mode and
removes xhci while a reset is still in progress, and then tries to
configure its hardware for device mode, the ongoing reset leads to
register access issues; specifically, all register reads returns 0.
These issues extend beyond the xhci register space (which is expected
during a reset) and affect the entire DWC3 IP block, causing the DWC3
device mode to malfunction.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-3-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3eff494f6e17abf932699483f133a708ac0355dc upstream.
xhci_reset() currently returns -ENODEV if XHCI_STATE_REMOVING is
set, without completing the xhci handshake, unless the reset completes
exceptionally quickly. This behavior causes a regression on Synopsys
DWC3 USB controllers with dual-role capabilities.
Specifically, when a DWC3 controller exits host mode and removes xhci
while a reset is still in progress, and then attempts to configure its
hardware for device mode, the ongoing, incomplete reset leads to
critical register access issues. All register reads return zero, not
just within the xHCI register space (which might be expected during a
reset), but across the entire DWC3 IP block.
This patch addresses the issue by preventing xhci_reset() from being
called in xhci_resume() and bailing out early in the reinit flow when
XHCI_STATE_REMOVING is set.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Suggested-by: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-2-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aa18d5769fcafe645a3ba01a9a69dde4f8dc8cc3 ]
Fix Kconfig symbol dependency on KUNIT, which isn't actually required
for XE to be built-in. However, if KUNIT is enabled, it must be built-in
too.
Fixes: 08987a8b6820 ("drm/xe: Fix build with KUNIT=m")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250627-xe-kunit-v2-2-756fe5cd56cf@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a559434880b320b83733d739733250815aecf1b0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84c0b4a00610afbde650fdb8ad6db0424f7b2cc3 ]
Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e725 ("drm/xe/bmg: Apply Wa_22019338487")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit deea6a7d6d803d6bb874a3e6f1b312e560e6c6df)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ed25aa7f7711f508b6120e336f05cd9d49943c0 ]
The issue arises when kzalloc() is invoked while holding umem_mutex or
any other lock acquired under umem_mutex. This is problematic because
kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke
mmu_notifier_invalidate_range_start(). This function can lead to
mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again,
resulting in a deadlock.
The problematic flow:
CPU0 | CPU1
---------------------------------------|------------------------------------------------
mlx5_ib_dereg_mr() |
→ revoke_mr() |
→ mutex_lock(&umem_odp->umem_mutex) |
| mlx5_mkey_cache_init()
| → mutex_lock(&dev->cache.rb_lock)
| → mlx5r_cache_create_ent_locked()
| → kzalloc(GFP_KERNEL)
| → fs_reclaim()
| → mmu_notifier_invalidate_range_start()
| → mlx5_ib_invalidate_range()
| → mutex_lock(&umem_odp->umem_mutex)
→ cache_ent_find_and_store() |
→ mutex_lock(&dev->cache.rb_lock) |
Additionally, when kzalloc() is called from within
cache_ent_find_and_store(), we encounter the same deadlock due to
re-acquisition of umem_mutex.
Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr()
and before acquiring rb_lock. This ensures that we don't hold
umem_mutex while performing memory allocations that could trigger
the reclaim path.
This change prevents the deadlock by ensuring proper lock ordering and
avoiding holding locks during memory allocation operations that could
trigger the reclaim path.
The following lockdep warning demonstrates the deadlock:
python3/20557 is trying to acquire lock:
ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at:
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
but task is already holding lock:
ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at:
unmap_vmas+0x7b/0x1a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
fs_reclaim_acquire+0x60/0xd0
mem_cgroup_css_alloc+0x6f/0x9b0
cgroup_init_subsys+0xa4/0x240
cgroup_init+0x1c8/0x510
start_kernel+0x747/0x760
x86_64_start_reservations+0x25/0x30
x86_64_start_kernel+0x73/0x80
common_startup_64+0x129/0x138
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x91/0xd0
__kmalloc_cache_noprof+0x4d/0x4c0
mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib]
mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib]
mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib]
__mlx5_ib_add+0x4b/0x190 [mlx5_ib]
mlx5r_probe+0xd9/0x320 [mlx5_ib]
auxiliary_bus_probe+0x42/0x70
really_probe+0xdb/0x360
__driver_probe_device+0x8f/0x130
driver_probe_device+0x1f/0xb0
__driver_attach+0xd4/0x1f0
bus_for_each_dev+0x79/0xd0
bus_add_driver+0xf0/0x200
driver_register+0x6e/0xc0
__auxiliary_driver_register+0x6a/0xc0
do_one_initcall+0x5e/0x390
do_init_module+0x88/0x240
init_module_from_file+0x85/0xc0
idempotent_init_module+0x104/0x300
__x64_sys_finit_module+0x68/0xc0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dev->cache.rb_lock){+.+.}-{4:4}:
__mutex_lock+0x98/0xf10
__mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib]
mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib]
ib_dereg_mr_user+0x85/0x1f0 [ib_core]
uverbs_free_mr+0x19/0x30 [ib_uverbs]
destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs]
uobj_destroy+0x57/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs]
ib_uverbs_ioctl+0x129/0x230 [ib_uverbs]
__x64_sys_ioctl+0x596/0xaa0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}:
__lock_acquire+0x1826/0x2f00
lock_acquire+0xd3/0x2e0
__mutex_lock+0x98/0xf10
mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x18e/0x1f0
unmap_vmas+0x182/0x1a0
exit_mmap+0xf3/0x4a0
mmput+0x3a/0x100
do_exit+0x2b9/0xa90
do_group_exit+0x32/0xa0
get_signal+0xc32/0xcb0
arch_do_signal_or_restart+0x29/0x1d0
syscall_exit_to_user_mode+0x105/0x1d0
do_syscall_64+0x79/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chain exists of:
&dev->cache.rb_lock --> mmu_notifier_invalidate_range_start -->
&umem_odp->umem_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&umem_odp->umem_mutex);
lock(mmu_notifier_invalidate_range_start);
lock(&umem_odp->umem_mutex);
lock(&dev->cache.rb_lock);
*** DEADLOCK ***
Fixes: abb604a1a9c8 ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24d693cf6c89d216a68634d44fa93e4400775d94 ]
Fix double decrement of 'in_use' counter on push_mkey_locked() failure
while deregistering an MR.
If we fail to return an mkey to the cache in cache_ent_find_and_store()
it'll update the 'in_use' counter. Its caller, revoke_mr(), also updates
it, thus having double decrement.
Wrong value of 'in_use' counter will be exposed through debugfs and can
also cause wrong resizing of the cache when users try to set cache
entry size using the 'size' debugfs.
To address this issue, the 'in_use' counter is now decremented within
mlx5_revoke_mr() also after a successful call to
cache_ent_find_and_store() and not within cache_ent_find_and_store().
Other success or failure flows remains unchanged where it was also
decremented.
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/97e979dff636f232ff4c83ce709c17c727da1fdb.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6463cbe08b0cbf9bba8763306764f5fd643023e1 ]
Memory allocated for the ECC engine conf is not released during spinand
cleanup. Below kmemleak trace is seen for this memory leak:
unreferenced object 0xffffff80064f00e0 (size 8):
comm "swapper/0", pid 1, jiffies 4294937458
hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace (crc 0):
kmemleak_alloc+0x30/0x40
__kmalloc_cache_noprof+0x208/0x3c0
spinand_ondie_ecc_init_ctx+0x114/0x200
nand_ecc_init_ctx+0x70/0xa8
nanddev_ecc_engine_init+0xec/0x27c
spinand_probe+0xa2c/0x1620
spi_mem_probe+0x130/0x21c
spi_probe+0xf0/0x170
really_probe+0x17c/0x6e8
__driver_probe_device+0x17c/0x21c
driver_probe_device+0x58/0x180
__device_attach_driver+0x15c/0x1f8
bus_for_each_drv+0xec/0x150
__device_attach+0x188/0x24c
device_initial_probe+0x10/0x20
bus_probe_device+0x11c/0x160
Fix the leak by calling nanddev_ecc_engine_cleanup() inside
spinand_cleanup().
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fcab2791543924d438e7fa49276d0998b0a069f ]
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1]
Reported-by: Peter Williams <peter@newton.cx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0
Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
