| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 333e4d79316c9ed5877d7aac8b8ed22efc74e96d ]
The GID cache warning messages can flood the kernel log when there are
multiple failed attempts to add GIDs. This can happen when creating many
virtual interfaces without having enough space for their GIDs in the GID
table.
Change pr_warn to pr_warn_ratelimited to prevent log flooding while still
maintaining visibility of the issue.
Link: https://patch.msgid.link/r/fd45ed4a1078e743f498b234c3ae816610ba1b18.1750062357.git.leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7dc6b2d3b5503bcafebbeaf9818112bf367107b4 ]
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use
the existing zenbook duo keyboard quirk.
Signed-off-by: Rahul Chandra <rahul@chandra.net>
Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca46946a482238b0cdea459fb82fc837fb36260e ]
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45ebc7e6c125ce93d2ddf82cd5bea20121bb0258 ]
The virtqueue_resize() function was not correctly propagating error codes
from its internal resize helper functions, specifically
virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers
returned an error, but the subsequent call to virtqueue_enable_after_reset()
succeeded, the original error from the resize operation would be masked.
Consequently, virtqueue_resize() could incorrectly report success to its
caller despite an underlying resize failure.
This change restores the original code behavior:
if (vdev->config->enable_vq_after_reset(_vq))
return -EBUSY;
return err;
Fix: commit ad48d53b5b3f ("virtio_ring: separate the logic of reset/enable from virtqueue_resize")
Cc: xuanzhuo@linux.alibaba.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24b2f5df86aaebbe7bac40304eaf5a146c02367c ]
The `tx_may_stop()` logic stops TX queues if free descriptors
(`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2).
If the total ring size (`ring_num`) is not strictly greater than this
value, queues can become persistently stopped or stop after minimal
use, severely degrading performance.
A single sk_buff transmission typically requires descriptors for:
- The virtio_net_hdr (1 descriptor)
- The sk_buff's linear data (head) (1 descriptor)
- Paged fragments (up to MAX_SKB_FRAGS descriptors)
This patch enforces that the TX ring size ('ring_num') must be strictly
greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is
always large enough to hold at least one maximally-fragmented packet
plus at least one additional slot.
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f4a8f561d08e39f7833d4a278ebfb12a41eef15f upstream.
When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in
hard irq context, but the input_event() takes a spin_lock, which isn't
allowed there as it is converted to a rt_spin_lock().
[ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0
...
[ 4054.290195] __might_resched+0x13c/0x1f4
[ 4054.290209] rt_spin_lock+0x54/0x11c
[ 4054.290219] input_event+0x48/0x80
[ 4054.290230] gpio_keys_irq_timer+0x4c/0x78
[ 4054.290243] __hrtimer_run_queues+0x1a4/0x438
[ 4054.290257] hrtimer_interrupt+0xe4/0x240
[ 4054.290269] arch_timer_handler_phys+0x2c/0x44
[ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c
[ 4054.290297] handle_irq_desc+0x40/0x58
[ 4054.290307] generic_handle_domain_irq+0x1c/0x28
[ 4054.290316] gic_handle_irq+0x44/0xcc
Considering the gpio_keys_irq_isr() can run in any context, e.g. it can
be threaded, it seems there's no point in requesting the timer isr to
run in hard irq context.
Relax the hrtimer not to use the hard context.
Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-1-3fc55a9c3619@foss.st.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ adjusted context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit fb5873b779dd ("iommu/vt-d: Restore context entry setup order
for aliased devices") was incorrectly backported: the domain_attached
assignment was mistakenly placed in device_set_dirty_tracking()
instead of original identity_domain_attach_dev().
Fix this by moving the assignment to the correct function as in the
original commit.
Fixes: fb5873b779dd ("iommu/vt-d: Restore context entry setup order for aliased devices")
Closes: https://lore.kernel.org/linux-iommu/721D44AF820A4FEB+722679cb-2226-4287-8835-9251ad69a1ac@bbaa.fun/
Cc: stable@vger.kernel.org
Reported-by: Ban ZuoXiang <bbaa@bbaa.fun>
Signed-off-by: Ban ZuoXiang <bbaa@bbaa.fun>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3155ac89251dcb5e35a3ec2f60a74a6ed22c56fd upstream.
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a58b21adee3df10ca6f4491af965c4890d2d8e3 upstream.
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 241cc827c0987d7173714fc5a95a7c8fc9bf15c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: 3155ac89251d ("drm/xe: Move page fault init after topology init")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e66b0a8f048bc8590eb1047480f946898a3f80c9 upstream.
Using of_property_read_bool() for non-boolean properties is deprecated
and results in a warning during runtime since commit c141ecc3cecd ("of:
Warn when of_property_read_bool() is used on non-boolean properties").
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Cc: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250415075230.16235-1-johan+linaro@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9503a2ecd95e23d7243bcde7138192de8c1c281 upstream.
omap_i2c_init() can fail. Handle this error in omap_i2c_probe().
Fixes: 010d442c4a29 ("i2c: New bus driver for TI OMAP boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v2.6.19+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/565311abf9bafd7291ca82bcecb48c1fac1e727b.1751701715.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 666c23af755dccca8c25b5d5200ca28153c69a05 upstream.
If an error occurs after calling mux_state_select(), mux_state_deselect()
should be called as already done in the remove function.
Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/998542981b6d2435c057dd8b9fe71743927babab.1749913149.git.christophe.jaillet@wanadoo.fr
Stable-dep-of: a9503a2ecd95 ("i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b6ef830c60b6f4adfb72d0780b4363df3a1feb9c upstream.
Some SoCs require muxes in the routing for SDA and SCL lines.
Therefore, add support for setting the mux by reading the mux-states
property from the dt-node.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250318103622.29979-3-j-choudhary@ti.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: a9503a2ecd95 ("i2c: omap: Handle omap_i2c_init() errors in omap_i2c_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b30a3d1ec2538a1fd363fde746b9fe1d38abc77 upstream.
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes: 46b92e10d631 ("net: libwx: support hardware statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef8abc0ba49ce717e6bc4124e88e59982671f3b5 upstream.
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:
[ 1.332226] usb30_prim_gdsc status stuck at 'off'
Leave the BCR deasserted when exiting the driver to avoid this issue.
Cc: stable <stable@kernel.org>
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com
[ adapted to individual clock management instead of bulk clock operations ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2521106fc732b0b75fd3555c689b1ed1d29d273c upstream.
Hub driver warm-resets ports in SS.Inactive or Compliance mode to
recover a possible connected device. The port reset code correctly
detects if a connection is lost during reset, but hub driver
port_event() fails to take this into account in some cases.
port_event() ends up using stale values and assumes there is a
connected device, and will try all means to recover it, including
power-cycling the port.
Details:
This case was triggered when xHC host was suspended with DbC (Debug
Capability) enabled and connected. DbC turns one xHC port into a simple
usb debug device, allowing debugging a system with an A-to-A USB debug
cable.
xhci DbC code disables DbC when xHC is system suspended to D3, and
enables it back during resume.
We essentially end up with two hosts connected to each other during
suspend, and, for a short while during resume, until DbC is enabled back.
The suspended xHC host notices some activity on the roothub port, but
can't train the link due to being suspended, so xHC hardware sets a CAS
(Cold Attach Status) flag for this port to inform xhci host driver that
the port needs to be warm reset once xHC resumes.
CAS is xHCI specific, and not part of USB specification, so xhci driver
tells usb core that the port has a connection and link is in compliance
mode. Recovery from complinace mode is similar to CAS recovery.
xhci CAS driver support that fakes a compliance mode connection was added
in commit 8bea2bd37df0 ("usb: Add support for root hub port status CAS")
Once xHCI resumes and DbC is enabled back, all activity on the xHC
roothub host side port disappears. The hub driver will anyway think
port has a connection and link is in compliance mode, and hub driver
will try to recover it.
The port power-cycle during recovery seems to cause issues to the active
DbC connection.
Fix this by clearing connect_change flag if hub_port_reset() returns
-ENOTCONN, thus avoiding the whole unnecessary port recovery and
initialization attempt.
Cc: stable@vger.kernel.org
Fixes: 8bea2bd37df0 ("usb: Add support for root hub port status CAS")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250623133947.3144608-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9bd9c8026341f75f25c53104eb7e656e357ca1a2 upstream.
Delayed work that prevents USB3 hubs from runtime-suspending too early
needed to be flushed in hub_quiesce() to resolve issues detected on
QC SC8280XP CRD board during suspend resume testing.
This flushing did however trigger new issues on Raspberry Pi 3B+, which
doesn't have USB3 ports, and doesn't queue any post resume delayed work.
The flushed 'hub->init_work' item is used for several purposes, and
is originally initialized with a 'NULL' work function. The work function
is also changed on the fly, which may contribute to the issue.
Solve this by creating a dedicated delayed work item for post resume work,
and flush that delayed work in hub_quiesce()
Cc: stable <stable@kernel.org>
Fixes: a49e1e2e785f ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP CRD
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a49e1e2e785fb3621f2d748581881b23a364998a upstream.
Delayed work to prevent USB3 hubs from runtime-suspending immediately
after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection
of high tier USB3 devices behind suspended hubs").
This delayed work needs be flushed if system suspends, or hub needs to
be quiesced for other reasons right after resume. Not flushing it
triggered issues on QC SC8280XP CRD board during suspend/resume testing.
Fix it by flushing the delayed resume work in hub_quiesce()
The delayed work item that allow hub runtime suspend is also scheduled
just before calling autopm get. Alan pointed out there is a small risk
that work is run before autopm get, which would call autopm put before
get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.
Cc: stable <stable@kernel.org>
Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8f5b7e2bec1c36578fdaa74a6951833541103e27 upstream.
USB3 devices connected behind several external suspended hubs may not
be detected when plugged in due to aggressive hub runtime pm suspend.
The hub driver immediately runtime-suspends hubs if there are no
active children or port activity.
There is a delay between the wake signal causing hub resume, and driver
visible port activity on the hub downstream facing ports.
Most of the LFPS handshake, resume signaling and link training done
on the downstream ports is not visible to the hub driver until completed,
when device then will appear fully enabled and running on the port.
This delay between wake signal and detectable port change is even more
significant with chained suspended hubs where the wake signal will
propagate upstream first. Suspended hubs will only start resuming
downstream ports after upstream facing port resumes.
The hub driver may resume a USB3 hub, read status of all ports, not
yet see any activity, and runtime suspend back the hub before any
port activity is visible.
This exact case was seen when conncting USB3 devices to a suspended
Thunderbolt dock.
USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating
USB3 devices expect to be resumed within 100ms after signaling wake.
if not then device will resend the wake signal.
Give the USB3 hubs twice this time (200ms) to detect any port
changes after resume, before allowing hub to runtime suspend again.
Cc: stable <stable@kernel.org>
Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8d121a82fa564e0c8bd86ce4ec56b2a43b9b016e ]
Currently even the SoC's OVL does not declare the support of AFBC, AFBC
is still announced to the userspace within the IN_FORMATS blob, which
breaks modern Wayland compositors like KWin Wayland and others.
Gate passing modifiers to drm_universal_plane_init() behind querying the
driver of the hardware block for AFBC support.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: CK Hu <ck.hu@medaitek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250531121140.387661-1-uwu@icenowy.me/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d208261e9f7c66960587b10473081dc1cecbe50b ]
Our hardware registers are set through GCE, not by the CPU.
DRM might assume the hardware is disabled immediately after calling
atomic_disable() of drm_plane, but it is only truly disabled after the
GCE IRQ is triggered.
Additionally, the cursor plane in DRM uses async_commit, so DRM will
not wait for vblank and will free the buffer immediately after calling
atomic_disable().
To prevent the framebuffer from being freed before the layer disable
settings are configured into the hardware, which can cause an IOMMU
fault error, a wait_event_timeout has been added to wait for the
ddp_cmdq_cb() callback,indicating that the GCE IRQ has been triggered.
Fixes: 2f965be7f900 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250624113223.443274-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be5dcaed694e4255dc02dd0acfe036708c535def ]
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable().
Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
Signed-off-by: Zigit Zo <zuozhijie@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250716115717.1472430-1-zuozhijie@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
addrconf
[ Upstream commit d7501e076d859d2f381d57bd984ff6db13172727 ]
Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf.
Commit under Fixes added a new flag change that was not made
to hv_netvsc resulting in the VF being assinged an IPv6.
Fixes: 8a321cf7becc ("net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconf")
Suggested-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250716002607.4927-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81dccec448d204e448ae83e1fe60e8aaeaadadb8 ]
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4d1c5d0b99b75263a5626d2e52d569db3844b33 ]
Since the GuC is reset during GT reset, we need to re-send the
entire SR-IOV provisioning configuration to the GuC. But since
this whole configuration is protected by the PF master mutex and
we can't avoid making allocations under this mutex (like during
LMEM provisioning), we can't do this reprovisioning from gt-reset
path if we want to be reclaim-safe. Move VFs reprovisioning to a
async worker that we will start from the gt-reset path.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250125215505.720-1-michal.wajdeczko@intel.com
Stable-dep-of: 81dccec448d2 ("drm/xe/pf: Prepare to stop SR-IOV support prior GT reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13a48a0fa52352f9fe58e2e1927670dcfea64c3a ]
Some VF accessible registers (like GuC scratch registers) must be
explicitly reset during the FLR. While this is today done by the GuC
firmware, according to the design, this should be responsibility of
the PF driver, as future platforms may require more registers to be
reset. Likewise GuC, the PF can access VFs registers by adding some
platform specific offset to the original register address.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902192953.1792-1-michal.wajdeczko@intel.com
Stable-dep-of: 81dccec448d2 ("drm/xe/pf: Prepare to stop SR-IOV support prior GT reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 531d0d32de3e1b6b77a87bd37de0c2c6e17b496a ]
gso_size is expected by the networking stack to be the size of the
payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt
is the full sized frame (including the headers). Dividing cqe_bcnt by
lro_num_seg will then give incorrect results.
For example, running a bpftrace higher up in the TCP-stack
(tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even
though in reality the payload was only 1448 bytes.
This can have unintended consequences:
- In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss
will be 1448 (because tp->advmss is 1448). Thus, we will always
recompute scaling_ratio each time an LRO-packet is received.
- In tcp_gro_receive(), it will interfere with the decision whether or
not to flush and thus potentially result in less gro'ed packets.
So, we need to discount the protocol headers from cqe_bcnt so we can
actually divide the payload by lro_num_seg to get the real gso_size.
v2:
- Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len
(Tariq Toukan <tariqt@nvidia.com>)
- Improve commit-message (Gal Pressman <gal@nvidia.com>)
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715-cpaasch-pf-925-investigate-incorrect-gso_size-on-cx-7-nic-v2-1-e06c3475f3ac@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
without board ID
[ Upstream commit 43015955795a619f7ca4ae69b9c0ffc994c82818 ]
For GF variant of WCN6855 without board ID programmed
btusb_generate_qca_nvm_name() will chose wrong NVM
'qca/nvm_usb_00130201.bin' to download.
Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'.
Also simplify NVM choice logic of btusb_generate_qca_nvm_name().
Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4706c5058a7bd7d7c20f3b24a8f523ecad44e83 ]
The lockdep tool can report a circular lock dependency warning in the loop
driver's AIO read/write path:
```
[ 6540.587728] kworker/u96:5/72779 is trying to acquire lock:
[ 6540.593856] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.603786]
[ 6540.603786] but task is already holding lock:
[ 6540.610291] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.620210]
[ 6540.620210] other info that might help us debug this:
[ 6540.627499] Possible unsafe locking scenario:
[ 6540.627499]
[ 6540.634110] CPU0
[ 6540.636841] ----
[ 6540.639574] lock(sb_writers#9);
[ 6540.643281] lock(sb_writers#9);
[ 6540.646988]
[ 6540.646988] *** DEADLOCK ***
```
This patch fixes the issue by using the AIO-specific helpers
`kiocb_start_write()` and `kiocb_end_write()`. These functions are
designed to be used with a `kiocb` and manage write sequencing
correctly for asynchronous I/O without introducing the problematic
lock dependency.
The `kiocb` is already part of the `loop_cmd` struct, so this change
also simplifies the completion function `lo_rw_aio_do_completion()` by
using the `iocb` from the `cmd` struct directly, instead of retrieving
the loop device from the request queue.
Fixes: 39d86db34e41 ("loop: add file_start_write() and file_end_write()")
Cc: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250716114808.3159657-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c4ca3c46167518f8534ed70f6e3b4bf86c4d158 ]
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/
Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bedd0330a19b3a4448e67941732153ce04d3fb9b ]
pf->ice_debugfs_pf_fwlog should be checked for an error here.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ce58b01ada408b372f15b7c992ed0519840e3cf ]
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 495a4f0dce9c8c4478c242209748f1ee9e4d5820 ]
Add buffer_recv_size to store the size of the received bytes.
Validate buffer_recv_size in send_usb_cmd().
Reported-by: syzbot+3bbbade4e1a7ab45ca3b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-hwmon/61233ba1-e5ad-4d7a-ba31-3b5d0adcffcc@roeck-us.net
Fixes: 40c3a4454225 ("hwmon: add Corsair Commander Pro driver")
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20250619132817.39764-5-mail@mariuszachmann.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f97a7588db7a545ea07ee0d512789bfad4931d8 ]
Fixes reset GPIO usage during probe by ensuring we retrieve the GPIO and
take the device out of reset (if it defaults to being in reset) before
we attempt to communicate with the device. This is achieved by moving
the call to tcan4x5x_get_gpios() before tcan4x5x_find_version() and
avoiding any device communication while getting the GPIOs. Once we
determine the version, we can then take the knowledge of which GPIOs we
obtained and use it to decide whether we need to disable the wake or
state pin functions within the device.
This change is necessary in a situation where the reset GPIO is pulled
high externally before the CPU takes control of it, meaning we need to
explicitly bring the device out of reset before we can start
communicating with it at all.
This also has the effect of fixing an issue where a reset of the device
would occur after having called tcan4x5x_disable_wake(), making the
original behavior not actually disable the wake. This patch should now
disable wake or state pin functions well after the reset occurs.
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250711141728.1826073-1-brett.werling@garmin.com
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Fixes: 142c6dc6d9d7 ("can: tcan4x5x: Add support for tcan4552/4553")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36131b72fb1c62bc61e86068618de304763b8ac7 ]
The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
If this property is omitted the reset default, the internal reference
voltage, is used.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241114-tcan-wkrqv-v5-2-a2d50833ed71@geanix.com
[mkl: remove unused variable in tcan4x5x_get_dt_data()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 0f97a7588db7 ("can: tcan4x5x: fix reset gpio usage during probe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0523c6cc87e558c50ff4489c87c54c55068b1169 ]
When restoring the default socket callbacks during a TLS handshake, we
need to acquire a write lock on sk_callback_lock. Previously, a read
lock was used, which is insufficient for modifying sk_user_data and
sk_data_ready.
Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71257925e83eae1cb6913d65ca71927d2220e6d1 ]
Procedures for nvme-mpath IO accounting:
1) initialize nvme_request and clear flags;
2) set NVME_MPATH_IO_STATS and increase inflight counter when IO
started;
3) check NVME_MPATH_IO_STATS and decrease inflight counter when IO is
done;
However, for the case nvme_fail_nonready_command(), both step 1) and 2)
are skipped, and if old nvme_request set NVME_MPATH_IO_STATS and then
request is reused, step 3) will still be executed, causing inflight I/O
counter to be negative.
Fix the problem by clearing nvme_request in nvme_fail_nonready_command().
Fixes: ea5e5f42cd2c ("nvme-fabrics: avoid double completions in nvmf_fail_nonready_command")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_+dauobyYyP805t33WMJVzOWj=7+51p4_j9rA63D9sog@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0f2b992d8185a0366be951685e08643aae17d6d ]
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd8e34afd6709cb2f9c0e63340f567e6c066ed8e ]
The command word members of struct nvme_common_command are __le32 type,
so use helper le32_to_cpu() to read them properly.
Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80d7762e0a42307ee31b21f090e21349b98c14f6 ]
When inserting a namespace into the controller's namespace list, the
function uses list_add_rcu() when the namespace is inserted in the middle
of the list, but falls back to a regular list_add() when adding at the
head of the list.
This inconsistency could lead to race conditions during concurrent
access, as users might observe a partially updated list. Fix this by
consistently using list_add_rcu() in both code paths to ensure proper
RCU protection throughout the entire function.
Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7727ec1523d7973defa1dff8f9c0aad288d04008 ]
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710173849.2381003-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a628e69b6412dc02757a6a23f7f16ce0c14d71f1 ]
To clear the valid result status, 1 should be written to
ACP_SDW_IMM_CMD_STS register. Update the ACP_SW_IMM_CMD_STS register value
as 1.
Fixes: d8f48fbdfd9a ("soundwire: amd: Add support for AMD Manager driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250620102617.73437-1-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86a4371b76976158be875dc654ceee35c574b27b ]
Sometimes, its observed that during system level suspend callback
execution, after link is down, handling pending slave status workqueue
results in mipi register access failures as shown below.
soundwire sdw-master-0-0: trf on Slave 1 failed:-110 read addr 0 count 1
rt722-sdca sdw:0:0:025d:0722:01: SDW_DP0_INT recheck read failed:-110
rt722-sdca sdw:0:0:025d:0722:01: Slave 1 alert handling failed: -110
amd_sdw_manager amd_sdw_manager.0: SDW0 cmd response timeout occurred
amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1
soundwire sdw-master-0-0: trf on Slave 1 failed:-110 write addr 5c count 1
amd_sdw_manager amd_sdw_manager.0: SDW0 previous cmd status clear failed
amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1
soundwire sdw-master-0-0: trf on Slave 1 failed:-110 write addr 5d count 1
amd_sdw_manager amd_sdw_manager.0: SDW0 previous cmd status clear failed
amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1
Cancel the pending slave status workqueue prior to initiating clock stop
sequence during suspend callback execution for both the power modes.
Fixes: 9cf1efc5ed2d ("soundwire: amd: add pm_prepare callback and pm ops support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250530054447.1645807-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 46d8c744136ce2454aa4c35c138cc06817f92b8e upstream.
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707161439.88385-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9cb26291d009243a4478a7ffb37b3a9175bfce9 upstream.
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case.
Reported-by: syzbot+cb96ec476fb4914445c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb96ec476fb4914445c9
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707153355.82474-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab705c8c35e18652abc6239c07cf3441f03e2cda upstream.
Correct some left shifts of the signed integer constant 1 by some
unsigned number less than 32. Change the constant to 1U to avoid
shifting a 1 into the sign bit.
The corrected functions are comedi_dio_insn_config(),
comedi_dio_update_state(), and __comedi_device_postconfig().
Fixes: e523c6c86232 ("staging: comedi: drivers: introduce comedi_dio_insn_config()")
Fixes: 05e60b13a36b ("staging: comedi: drivers: introduce comedi_dio_update_state()")
Fixes: 09567cb4373e ("staging: comedi: initialize subdevice s->io_bits in postconfig")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707121555.65424-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08ae4b20f5e82101d77326ecab9089e110f224cc upstream.
The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to
hold the array of `struct comedi_insn`, getting the length from the
`n_insns` member of the `struct comedi_insnlist` supplied by the user.
The allocation will fail with a WARNING and a stack dump if it is too
large.
Avoid that by failing with an `-EINVAL` error if the supplied `n_insns`
value is unreasonable.
Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set
this to the same value as `MAX_SAMPLES` (65536), which is the maximum
allowed sum of the values of the member `n` in the array of `struct
comedi_insn`, and sensible comedi instructions will have an `n` of at
least 1.
Reported-by: syzbot+d6995b62e5ac7d79557a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d6995b62e5ac7d79557a
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250704120405.83028-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70f2b28b5243df557f51c054c20058ae207baaac upstream.
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: 79e5e6addbb1 ("staging: comedi: das6402: rewrite broken driver")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707135737.77448-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed93c6f68a3be06e4e0c331c6e751f462dee3932 upstream.
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test.
Reported-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52293513298e0fd9a94
Fixes: 729988507680 ("staging: comedi: das16m1: tidy up the irq support in das16m1_attach()")
Tested-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com
Suggested-by: "Enju, Kohei" <enjuk@amazon.co.jp>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707130908.70758-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66acb1586737a22dd7b78abc63213b1bcaa100e4 upstream.
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: ad7a370c8be4 ("staging: comedi: aio_iiro_16: add command support for change of state detection")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707134622.75403-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
