summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-17net: hns3: fix ROCE base interrupt vector initialization bugJie Wang
[ Upstream commit beb27ca451a57a1c0e52b5268703f3c3173c1f8c ] Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use pci_irq_vector() to get interrupt vector, which adds the relative interrupt vector again and gets wrong interrupt vector. So fixes it by assign relative interrupt vector to ROCE instead of MSIX interrupt vector and delete the unused struct member base_msi_vector declaration of hclgevf_dev. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10Marek Behún
[ Upstream commit dc2fc9f03c5c410d8f01c2206b3d529f80b13733 ] Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are only 1G. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm/i915/fb: Fix rounding error in subsampled plane size calculationImre Deak
[ Upstream commit 90ab96f3872eae816f4e07deaa77322a91237960 ] For NV12 FBs with odd main surface tile-row height the CCS surface height was incorrectly calculated 1 less than the actual value. Fix this by rounding up the result of divison. For consistency do the same for the CCS surface width calculation. Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.com (cherry picked from commit 2ee5ef9c934ad26376c9282171e731e6c0339815) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17gve: Fix off by one in gve_tx_timeout()Dan Carpenter
[ Upstream commit 1c360cc1cc883fbdf0a258b4df376571fbeac5ee ] The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this > needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[] array is allocated in gve_alloc_notify_blocks(). Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_widthArnd Bergmann
[ Upstream commit 2498363310e9b5e5de0e104709adc35c9f3ff7d9 ] Using the % operator on a 64-bit variable is expensive and can cause a link failure: arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width': stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod' arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param': stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod' As we know that we just want to check the alignment in stm32_dma_get_max_width(), there is no need for a full division, and using a simple mask is a faster replacement. Same in stm32_dma_set_xfer_param(), change this to only allow burst transfers if the address is a multiple of the length. stm32_dma_get_best_burst just after will take buf_len into account to fix burst in case of misalignment. Fixes: b20fd5fa310c ("dmaengine: stm32-dma: fix stm32_dma_get_max_width") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211103153312.41483-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17dmaengine: stm32-dma: fix burst in case of unaligned memory addressAmelie Delaunay
[ Upstream commit af229d2c2557b5cf2a3b1eb39847ec1de7446873 ] Theorically, address pointers used by STM32 DMA must be chosen so as to ensure that all transfers within a burst block are aligned on the address boundary equal to the size of the transfer. If this is always the case for peripheral addresses on STM32, it is not for memory addresses if the user doesn't respect this alignment constraint. To avoid a weird behavior of the DMA controller in this case (no error triggered but data are not transferred as expected), force no burst. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17nfc: pn533: Fix double free when pn533_fill_fragment_skbs() failsChengfeng Ye
[ Upstream commit 9fec40f850658e00a14a7dd9e06f7fbc7e59cc4a ] skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs, but follow error handler branch when pn533_fill_fragment_skbs() fails, skb is freed again, results in double free issue. Fix this by not free skb in error path of pn533_fill_fragment_skbs. Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17zram: off by one in read_block_state()Dan Carpenter
[ Upstream commit a88e03cf3d190cf46bc4063a9b7efe87590de5f4 ] snprintf() returns the number of bytes it would have printed if there were space. But it does not count the NUL terminator. So that means that if "count == copied" then this has already overflowed by one character. This bug likely isn't super harmful in real life. Link: https://lkml.kernel.org/r/20210916130404.GA25094@kili Fixes: c0265342bff4 ("zram: introduce zram memory tracking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17can: mcp251xfd: mcp251xfd_chip_start(): fix error handling for ↵Marc Kleine-Budde
mcp251xfd_chip_rx_int_enable() [ Upstream commit 69c55f6e7669d46bb40e41f6e2b218428178368a ] This patch fixes the error handling for mcp251xfd_chip_rx_int_enable(). Instead just returning the error, properly shut down the chip. Link: https://lore.kernel.org/all/20211106201526.44292-2-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error pathVincent Mailhol
[ Upstream commit d9447f768bc8c60623e4bb3ce65b8f4654d33a50 ] In es58x_rx_err_msg(), if can->do_set_mode() fails, the function directly returns without calling netif_rx(skb). This means that the skb previously allocated by alloc_can_err_skb() is not freed. In other terms, this is a memory leak. This patch simply removes the return statement in the error branch and let the function continue. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17Revert "drm/imx: Annotate dma-fence critical section in commit path"Fabio Estevam
[ Upstream commit 14d9a37c952588930d7226953359fea3ab956d39 ] This reverts commit f4b34faa08428d813fc3629f882c503487f94a12. Since commit f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") the following possible circular dependency is detected: [ 5.001811] ====================================================== [ 5.001817] WARNING: possible circular locking dependency detected [ 5.001824] 5.14.9-01225-g45da36cc6fcc-dirty #1 Tainted: G W [ 5.001833] ------------------------------------------------------ [ 5.001838] kworker/u8:0/7 is trying to acquire lock: [ 5.001848] c1752080 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x40/0x294 [ 5.001903] [ 5.001903] but task is already holding lock: [ 5.001909] c176df78 (dma_fence_map){++++}-{0:0}, at: imx_drm_atomic_commit_tail+0x10/0x160 [ 5.001957] [ 5.001957] which lock already depends on the new lock. ... Revert it for now. Tested on a imx6q-sabresd. Fixes: f4b34faa0842 ("drm/imx: Annotate dma-fence critical section in commit path") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211104001112.4035691-1-festevam@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm: fb_helper: improve CONFIG_FB dependencyArnd Bergmann
[ Upstream commit 9d6366e743f37d36ef69347924ead7bcc596076e ] My previous patch correctly addressed the possible link failure, but as Jani points out, the dependency is now stricter than it needs to be. Change it again, to allow DRM_FBDEV_EMULATION to be used when DRM_KMS_HELPER and FB are both loadable modules and DRM is linked into the kernel. As a side-effect, the option is now only visible when at least one DRM driver makes use of DRM_KMS_HELPER. This is better, because the option has no effect otherwise. Fixes: 606b102876e3 ("drm: fb_helper: fix CONFIG_FB dependency") Suggested-by: Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211029120307.1407047-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ACPI: PM: Fix device wakeup power reference counting errorRafael J. Wysocki
[ Upstream commit 452a3e723f75880757acf87b053935c43aa89f89 ] Fix a device wakeup power reference counting error introduced by commit a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power resources") because of a coding mistake. Fixes: a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power resources") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: altera-sysmgr: Fix a mistake caused by resource_size conversionKai Song
[ Upstream commit fae2570d629cdd72f0611d015fc4ba705ae5422b ] The resource_size defines that: res->end - res->start + 1; The origin original code is: sysmgr_config.max_register = res->end - res->start - 3; So, the correct fix is that: sysmgr_config.max_register = resource_size(res) - 4; Fixes: d12edf9661a4 ("mfd: altera-sysmgr: Use resource_size function on resource object") Signed-off-by: Kai Song <songkai01@inspur.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211006141926.6120-1-songkai01@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: sprd: Add SPI device ID tableMark Brown
[ Upstream commit c5c7f0677107052060037583b9c8c15d818afb04 ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-4-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: cpcap: Add SPI device ID tableMark Brown
[ Upstream commit d5fa8592b773f4da2b04e7333cd37efec5e4ca43 ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-3-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17mfd: core: Add missing of_node_put for loop iterationKrzysztof Kozlowski
[ Upstream commit 002be81140075e17a1ebd5c3c55e356fbab0ddad ] Early exits from for_each_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/mfd/mfd-core.c:197:2-24: WARNING: Function "for_each_child_of_node" should have of_node_put() before goto around lines 209. Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failedHuang Guobin
[ Upstream commit b93c6a911a3fe926b00add28f3b932007827c4ca ] When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm/ttm: remove ttm_bo_vm_insert_huge()Jason Gunthorpe
[ Upstream commit 0d979509539ed1df883a30d442177ca7be609565 ] The huge page functionality in TTM does not work safely because PUD and PMD entries do not have a special bit. get_user_pages_fast() considers any page that passed pmd_huge() as usable: if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) || pmd_devmap(pmd))) { And vmf_insert_pfn_pmd_prot() unconditionally sets entry = pmd_mkhuge(pfn_t_pmd(pfn, prot)); eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE. As such gup_huge_pmd() will try to deref a struct page: head = try_grab_compound_head(pmd_page(orig), refs, flags); and thus crash. Thomas further notices that the drivers are not expecting the struct page to be used by anything - in particular the refcount incr above will cause them to malfunction. Thus everything about this is not able to fully work correctly considering GUP_fast. Delete it entirely. It can return someday along with a proper PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast. Fixes: 314b6580adc5 ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> [danvet: Update subject per Thomas' &Christian's review] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: phy: fix duplex out of sync problem while changing settingsHeiner Kallweit
[ Upstream commit a4db9055fdb9cf607775c66d39796caf6439ec92 ] As reported by Zhang there's a small issue if in forced mode the duplex mode changes with the link staying up [0]. In this case the MAC isn't notified about the change. The proposed patch relies on the phylib state machine and ignores the fact that there are drivers that uses phylib but not the phylib state machine. So let's don't change the behavior for such drivers and fix it w/o re-adding state PHY_FORCING for the case that phylib state machine is used. [0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/ Fixes: 2bd229df5e2e ("net: phy: remove state PHY_FORCING") Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offlineRafael J. Wysocki
[ Upstream commit dbea75fe18f60e364de6d994fc938a24ba249d81 ] Commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") caused intel_pstate to use nonzero HWP desired values in certain usage scenarios, but it did not prevent them from being leaked into the confugirations in which HWP desired is expected to be 0. The failing scenarios are switching the driver from the passive mode to the active mode and starting a new kernel via kexec() while intel_pstate is running in the passive mode. To address this issue, ensure that HWP desired will be cleared on offline and suspend/shutdown. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17PCI: Do not enable AtomicOps on VFsSelvin Xavier
[ Upstream commit 5ec0a6fcb60ea430f8ee7e0bec22db9b22f856d3 ] Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/1631354585-16597-1-git-send-email-selvin.xavier@broadcom.com Fixes: 35f5ace5dea4 ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ataflop: remove ataflop_probe_lock mutexTetsuo Handa
[ Upstream commit 4ddb85d36613c45bde00d368bf9f357bd0708a0c ] Commit bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") introduced ataflop_probe_lock mutex, but forgot to unlock the mutex when atari_floppy_init() (i.e. module loading) succeeded. This will result in double lock deadlock if ataflop_probe() is called. Also, unregister_blkdev() must not be called from atari_floppy_init() with ataflop_probe_lock held when atari_floppy_init() failed, for ataflop_probe() waits for ataflop_probe_lock with major_names_lock held (i.e. AB-BA deadlock). __register_blkdev() needs to be called last in order to avoid calling ataflop_probe() when atari_floppy_init() is about to fail, for memory for completing already-started ataflop_probe() safely will be released as soon as atari_floppy_init() released ataflop_probe_lock mutex. As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from atari_floppy_exit(). By relocating __register_blkdev() / unregister_blkdev() as explained above, we can remove ataflop_probe_lock mutex, for probe function and __exit function are serialized by major_names_lock mutex. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/20211103230437.1639990-11-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17block/ataflop: provide a helper for cleanup up an atari diskLuis Chamberlain
[ Upstream commit deae1138d04758c7f8939fcb8aee330bc37e3015 ] Instead of using two separate code paths for cleaning up an atari disk, use one. We take the more careful approach to check for *all* disk types, as is done on exit. The init path didn't have that check as the alternative disk types are only probed for later, they are not initialized by default. Yes, there is a shared tag for all disks. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-14-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17block/ataflop: add registration bool before calling del_gendisk()Luis Chamberlain
[ Upstream commit 573effb298011d3fcabc9b12025cf637f8a07911 ] The ataflop assumes del_gendisk() is safe to call, this is only true because add_disk() does not return a failure, but that will change soon. And so, before we get to adding error handling for that case, let's make sure we keep track of which disks actually get registered. Then we use this to only call del_gendisk for them. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-13-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17block/ataflop: use the blk_cleanup_disk() helperLuis Chamberlain
[ Upstream commit 44a469b6acae6ad05c4acca8429467d1d50a8b8d ] Use the helper to replace two lines with one. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210927220302.1073499-12-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17drm/nouveau/svm: Fix refcount leak bug and missing check against null bugChenyuan Mi
[ Upstream commit 6bb8c2d51811eb5e6504f49efe3b089d026009d2 ] The reference counting issue happens in one exception handling path of nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets to decrease the refcount of mm increased by get_task_mm(), causing a refcount leak. Fix this issue by using mmput() to decrease the refcount in the exception handling path. Also, the function forgets to do check against null when get mm by get_task_mm(). Fix this issue by adding null check after get mm by get_task_mm(). Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Fixes: 822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating") Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14 Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17nvdimm/btt: do not call del_gendisk() if not neededLuis Chamberlain
[ Upstream commit 3aefb5ee843fbe4789d03bb181e190d462df95e4 ] del_gendisk() should not called if the disk has not been added. Fix this. Fixes: 41cd8b70c37a ("libnvdimm, btt: add support for blk integrity") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103165843.1402142-1-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17PCI: j721e: Fix j721e_pcie_probe() error pathChristophe JAILLET
[ Upstream commit 496bb18483cc0474913e81e18a6b313aaea4c120 ] If an error occurs after a successful cdns_pcie_init_phy() call, it must be undone by a cdns_pcie_disable_phy() call, as already done above and below. Update the goto to branch at the correct place of the error handling path. Link: https://lore.kernel.org/r/db477b0cb444891a17c4bb424467667dc30d0bab.1624794264.git.christophe.jaillet@wanadoo.fr Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ACPI: PMIC: Fix intel_pmic_regs_handler() read accessesHans de Goede
[ Upstream commit 009a789443fe4c8e6b1ecb7c16b4865c026184cd ] The handling of PMIC register reads through writing 0 to address 4 of the OpRegion is wrong. Instead of returning the read value through the value64, which is a no-op for function == ACPI_WRITE calls, store the value and then on a subsequent function == ACPI_READ with address == 3 (the address for the value field of the OpRegion) return the stored value. This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev there mostly functional (unfortunately there are still other issues). Here are the SET() / GET() functions of the PMIC ACPI device, which use this OpRegion, which clearly show the new behavior to be correct: OperationRegion (REGS, 0x8F, Zero, 0x50) Field (REGS, ByteAcc, NoLock, Preserve) { CLNT, 8, SA, 8, OFF, 8, VAL, 8, RWM, 8 } Method (GET, 3, Serialized) { If ((AVBE == One)) { CLNT = Arg0 SA = Arg1 OFF = Arg2 RWM = Zero If ((AVBG == One)) { GPRW = Zero } } Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */ } Method (SET, 4, Serialized) { If ((AVBE == One)) { CLNT = Arg0 SA = Arg1 OFF = Arg2 VAL = Arg3 RWM = One If ((AVBG == One)) { GPRW = One } } } Fixes: 0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ice: Fix not stopping Tx queues for VFsBrett Creeley
[ Upstream commit b385cca47363316c6d9a74ae9db407bbc281f815 ] When a VF is removed and/or reset its Tx queues need to be stopped from the PF. This is done by calling the ice_dis_vf_qs() function, which calls ice_vsi_stop_lan_tx_rings(). Currently ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA. Unfortunately, this is causing the Tx queues to not be disabled in some cases and when the VF tries to re-enable/reconfigure its Tx queues over virtchnl the op is failing. This is because a VF can be reset and/or removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues were already configured via ice_vsi_cfg_single_txq() in the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. This was causing the following error message when loading the ice driver, creating VFs, and modifying VF trust in an endless loop: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by always calling ice_dis_vf_qs() and silencing the error message in ice_vsi_stop_tx_ring() since the calling code ignores the return anyway. Also, all other places that call ice_vsi_stop_tx_ring() catch the error, so this doesn't affect those flows since there was no change to the values the function returns. Other solutions were considered (i.e. tracking which VF queues had been "started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed more complicated than it was worth. This solution also brings in the chance for other unexpected conditions due to invalid state bit checks. So, the proposed solution seemed like the best option since there is no harm in failing to stop Tx queues that were never started. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ice: Fix replacing VF hardware MAC to existing MAC filterSylwester Dziedziuch
[ Upstream commit ce572a5b88d5ca6737b5e23da9892792fd708ad3 ] VF was not able to change its hardware MAC address in case the new address was already present in the MAC filter list. Change the handling of VF add mac request to not return if requested MAC address is already present on the list and check if its hardware MAC needs to be updated in this case. Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: dsa: felix: fix broken VLAN-tagged PTP under VLAN-aware bridgeVladimir Oltean
[ Upstream commit 92f62485b3715882cd397b0cbd80a96d179b86d6 ] Normally it is expected that the dsa_device_ops :: rcv() method finishes parsing the DSA tag and consumes it, then never looks at it again. But commit c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix") added support for RX timestamping in a very unconventional way. On this switch, a partial timestamp is available in the DSA header, but the driver got away with not parsing that timestamp right away, but instead delayed that parsing for a little longer: dsa_switch_rcv(): nskb = cpu_dp->rcv(skb, dev); <------------- not here -> ocelot_rcv() ... skb = nskb; skb_push(skb, ETH_HLEN); skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); ... if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here -> felix_rxtstamp() return 0; When in felix_rxtstamp(), this driver accounted for the fact that eth_type_trans() happened in the meanwhile, so it got a hold of the extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes from the current skb->data. This worked for quite some time but was quite fragile from the very beginning. Not to mention that having DSA tag parsing split in two different files, under different folders (net/dsa/tag_ocelot.c vs drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to come that they might break this. Finally, the blamed commit does the following: at the end of ocelot_rcv(), it checks whether the skb payload contains a VLAN header. If it does, and this port is under a VLAN-aware bridge, that VLAN ID might not be correct in the sense that the packet might have suffered VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID from the skb payload using __skb_vlan_pop(), and take the classified VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the classified VLAN, and the skb payload is VLAN-untagged. The big problem is that __skb_vlan_pop() does: memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN); __skb_pull(skb, VLAN_HLEN); aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes from the skb headroom (effectively also moving skb->data, by definition). So for felix_rxtstamp()'s fragile logic, all bets are off now. Instead of having the "extraction" pointer point to the DSA header, it actually points to 4 bytes _inside_ the extraction header. Corollary, the last 4 bytes of the "extraction" header are in fact 4 stale bytes of the destination MAC address from the Ethernet header, from prior to the __skb_vlan_pop() movement. So of course, RX timestamps are completely bogus when the system is configured in this way. The fix is actually very simple: just don't structure the code like that. For better or worse, the DSA PTP timestamping API does not offer a straightforward way for drivers to present their RX timestamps, but other drivers (sja1105) have established a simple mechanism to carry their RX timestamp from dsa_device_ops :: rcv() all the way to dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to simply save the partial timestamp to the skb->cb, and complete it later. Question: why don't we simply populate the skb's struct skb_shared_hwtstamps from ocelot_rcv(), and bother with this complication of propagating the timestamp to felix_rxtstamp()? Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether PTP packets need sleepable context to retrieve the full RX timestamp. Currently felix_rxtstamp() answers "no, thanks" to that question, and calls ocelot_ptp_gettime64() from softirq atomic context. This is understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so hardware access does not require sleeping. But the felix driver is preparing for the introduction of other switches where hardware access is over a slow bus like SPI or MDIO: https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/ So I would like to keep this code structure, so the rework needed when that driver will need PTP support will be minimal (answer "yes, I need deferred context for this skb's RX timestamp", then the partial timestamp will still be found in the skb->cb. Fixes: ea440cd2d9b2 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by: Po Liu <po.liu@nxp.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driverVladimir Oltean
[ Upstream commit deab6b1cd9789bb9bd466d5e76aecb8b336259b4 ] As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17net: davinci_emac: Fix interrupt pacing disableMaxim Kiselev
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ] This patch allows to use 0 for `coal->rx_coalesce_usecs` param to disable rx irq coalescing. Previously we could enable rx irq coalescing via ethtool (For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable it because this part rejects 0 value: if (!coal->rx_coalesce_usecs) return -EINVAL; Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17nbd: fix possible overflow for 'first_minor' in nbd_dev_add()Yu Kuai
[ Upstream commit 940c264984fd1457918393c49674f6b39ee16506 ] If 'part_shift' is not zero, then 'index << part_shift' might overflow to a value that is not greater than '0xfffff', then sysfs might complains about duplicate creation. Fixes: b0d9111a2d53 ("nbd: use an idr to keep track of nbd devices") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20211102015237.2309763-3-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17nbd: fix max value for 'first_minor'Yu Kuai
[ Upstream commit e4c4871a73944353ea23e319de27ef73ce546623 ] commit b1a811633f73 ("block: nbd: add sanity check for first_minor") checks that 'first_minor' should not be greater than 0xff, which is wrong. Whitout the commit, the details that when user pass 0x100000, it ends up create sysfs dir "/sys/block/43:0" are as follows: nbd_dev_add disk->first_minor = index << part_shift -> default part_shift is 5, first_minor is 0x2000000 device_add_disk ddev->devt = MKDEV(disk->major, disk->first_minor) -> (0x2b << 20) | (0x2000000) = 0x2b00000 device_add device_create_sys_dev_entry format_dev_t sprintf(buffer, "%u:%u", MAJOR(dev), MINOR(dev)); -> got 43:0 sysfs_create_link -> /sys/block/43:0 By the way, with the wrong fix, when part_shift is the default value, only 8 ndb devices can be created since 8 << 5 is greater than 0xff. Since the max bits for 'first_minor' should be the same as what MKDEV() does, which is 20. Change the upper bound of 'first_minor' from 0xff to 0xfffff. Fixes: b1a811633f73 ("block: nbd: add sanity check for first_minor") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20211102015237.2309763-2-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17xen-pciback: Fix return in pm_ctrl_init()YueHaibing
[ Upstream commit 4745ea2628bb43a7ec34b71763b5a56407b33990 ] Return NULL instead of passing to ERR_PTR while err is zero, this fix smatch warnings: drivers/xen/xen-pciback/conf_space_capability.c:163 pm_ctrl_init() warn: passing zero to 'ERR_PTR' Fixes: a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211008074417.8260-1-yuehaibing@huawei.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17gpio: realtek-otto: fix GPIO line IRQ offsetSander Vanheule
[ Upstream commit 585a07079909ba9061ddd88214c36653e1aef71a ] The irqchip uses one domain for all GPIO lines, so the line offset should be determined w.r.t. the first line of the first port, not the first line of the triggered port. Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'Christophe JAILLET
[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ] A successful 'clk_prepare()' call should be balanced by a corresponding 'clk_unprepare()' call in the error handling path of the probe, as already done in the remove function. More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is also already called. So just the unprepare step has still to be done. Update the error handling path accordingly. Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17scsi: qla2xxx: Turn off target reset during issue_lipQuinn Tran
[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ] When user uses issue_lip to do link bounce, driver sends additional target reset to remote device before resetting the link. The target reset would affect other paths with active I/Os. This patch will remove the unnecessary target reset. Link: https://lore.kernel.org/r/20211026115412.27691-4-njavali@marvell.com Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17scsi: qla2xxx: Fix gnl list corruptionQuinn Tran
[ Upstream commit c98c5daaa24b583cba1369b7d167f93c6ae7299c ] Current code does list element deletion and addition in and out of lock protection. This patch moves deletion behind lock. list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8, next=ffff9130c6a715f0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE --------- - - 4.18.0-193.el8.x86_64 #1 Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014 Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx] RIP: 0010:__list_add_valid+0x41/0x50 Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08 RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046 RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00 RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0 R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8 FS: 0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0 Call Trace: qla24xx_async_gnl+0x113/0x3c0 [qla2xxx] ? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx] ? process_one_work+0x1a7/0x3b0 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17scsi: target: core: Remove from tmr_list during LUN unlinkDmitry Bogdanov
[ Upstream commit 12b6fcd0ea7f3cb7c3b34668fc678779924123ae ] Currently TMF commands are removed from de_device.dev_tmf_list at the very end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command status (response) being queued in transport layer. This means that LUN and backend device can be deleted in the meantime and a panic will occur: target_tmr_work() cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun - // - // - // - <<<--- lun remove <<<--- core backend device remove - // - // - // - qlt_handle_abts_completion() tfo->free_mcmd() transport_generic_free_cmd() target_put_sess_cmd() core_tmr_release_req() { if (dev) { // backend device, can not be null spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH Call Trace: NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0 LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod] Call Trace: (unreliable) 0x0 target_put_sess_cmd+0x2a0/0x370 [target_core_mod] transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod] tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx] process_one_work+0x2c4/0x5c0 worker_thread+0x88/0x690 For the iSCSI protocol this is easily reproduced: - Send some SCSI sommand - Send Abort of that command over iSCSI - Remove LUN on target - Send next iSCSI command to acknowledge the Abort_Response - Target panics There is no need to keep the command in tmr_list until response completion, so move the removal from tmr_list from the response completion to the response queueing when the LUN is unlinked. Move the removal from state list too as it is a subject to the same race condition. Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ar7: fix kernel builds for compiler testJackie Liu
[ Upstream commit 28b7ee33a2122569ac065cad578bf23f50cc65c3 ] TI AR7 Watchdog Timer is only build for 32bit. Avoid error like: In file included from drivers/watchdog/ar7_wdt.c:29: ./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’: ./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration] 111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == | ^~~~~~~~~ | CKSEG1ADDR Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUTAhmad Fatoum
[ Upstream commit 164483c735190775f29d0dcbac0363adc51a068d ] The fintek watchdog timer can configure timeouts of second granularity only up to 255 seconds. Beyond that, the timeout needs to be configured with minute granularity. WDIOC_GETTIMEOUT should report the actual timeout configured, not just echo back the timeout configured by the user. Do so. Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`Lars-Peter Clausen
[ Upstream commit e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ] Before the `callback_result` callback was introduced drivers coded their invocation to the callback in a similar way to: if (cb->callback) { spin_unlock(&dma->lock); cb->callback(cb->callback_param); spin_lock(&dma->lock); } With the introduction of `callback_result` two helpers where introduced to transparently handle both types of callbacks. And drivers where updated to look like this: if (dmaengine_desc_callback_valid(cb)) { spin_unlock(&dma->lock); dmaengine_desc_callback_invoke(cb, ...); spin_lock(&dma->lock); } dmaengine_desc_callback_invoke() correctly handles both `callback_result` and `callback`. But we forgot to update the dmaengine_desc_callback_valid() function to check for `callback_result`. As a result DMA descriptors that use the `callback_result` rather than `callback` don't have their callback invoked by drivers that follow the pattern above. Fix this by checking for both `callback` and `callback_result` in dmaengine_desc_callback_valid(). Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_readRobert-Ionut Alexa
[ Upstream commit 8120bd469f5525da229953c1197f2b826c0109f4 ] Free the kbuf buffer before returning from the dpaa2_console_read() function. The variable no longer goes out of scope, leaking the storage it points to. Fixes: c93349d8c170 ("soc: fsl: add DPAA2 console support") Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17auxdisplay: ht16k33: Fix frame buffer device blankingGeert Uytterhoeven
[ Upstream commit 840fe258332544aa7321921e1723d37b772af7a9 ] As the ht16k33 frame buffer sub-driver does not register an fb_ops.fb_blank() handler, blanking does not work: $ echo 1 > /sys/class/graphics/fb0/blank sh: write error: Invalid argument Fix this by providing a handler that always returns zero, to make sure blank events will be sent to the actual device handling the backlight. Reported-by: Robin van der Gracht <robin@protonic.nl> Suggested-by: Robin van der Gracht <robin@protonic.nl> Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17auxdisplay: ht16k33: Connect backlight to fbdevGeert Uytterhoeven
[ Upstream commit 80f9eb70fd9276938f0a131f76d438021bfd8b34 ] Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV), as the driver does not connect the backlight to the frame buffer device. Fix this moving backlight initialization up, and filling in fb_info.bl_dev. Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty stringGeert Uytterhoeven
[ Upstream commit afcb5a811ff3ab3969f09666535eb6018a160358 ] While writing an empty string to a device attribute is a no-op, and thus does not need explicit safeguards, the user can still write a single newline to an attribute file: echo > .../message If that happens, img_ascii_lcd_display() trims the newline, yielding an empty string, and causing an infinite loop in img_ascii_lcd_scroll(). Fix this by adding a check for empty strings. Clear the display in case one is encountered. Fixes: 0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 05:44:34 +0000