| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit e12d3e1624a02706cdd3628bbf5668827214fa33 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 276822a00db3c1061382b41e72cafc09d6a0ec30 upstream.
Lockdep detects the following issue on led-backlight removal:
[ 142.315935] ------------[ cut here ]------------
[ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
...
[ 142.500725] Call trace:
[ 142.503176] led_sysfs_enable+0x54/0x80 (P)
[ 142.507370] led_bl_remove+0x80/0xa8 [led_bl]
[ 142.511742] platform_remove+0x30/0x58
[ 142.515501] device_remove+0x54/0x90
...
Indeed, led_sysfs_enable() has to be called with the led_access
lock held.
Hold the lock when calling led_sysfs_disable().
Fixes: ae232e45acf9 ("backlight: add led-backlight driver")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250122091914.309533-1-herve.codina@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add check for the return value of spi_setup() and return the error
if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240705092800.3221159-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-18-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-17-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-16-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-15-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-14-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-13-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-12-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-10-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-8-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-6-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Only change the driver's backlight device, but leave the LCD
device as-is.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-5-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The for_each_child_of_node() macro automatically decrements the child
refcount at the end of every iteration. On early exits, of_node_put()
must be used to manually decrement the refcount and avoid memory leaks.
The scoped version of the macro accounts for such early breaks, fixing
the early exits without the need for explicit calls to of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202406172314.2vVgelaS-lkp@intel.com/
Fixes: b72755f5b577 ("backlight: Add new lm3509 backlight driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240624-lm3509_bl_scoped-v1-1-ceba9df38f23@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240619193558.2543645-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/backlight/platform_lcd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/backlight/rt4831-backlight.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240612-md-drivers-video-backlight-v1-1-f4ca1beb36cc@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The devm_backlight_device_register() doesn't return NULL, it returns
error pointers. Update the error checking to match.
Fixes: b72755f5b577 ("backlight: Add new lm3509 backlight driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/187b5bc5-a010-46c2-8ead-980df9efae79@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This is a general driver for LM3509 backlight chip of TI.
LM3509 is High Efficiency Boost for White LEDs and/or OLED Displays with
Dual Current Sinks. This driver supports OLED/White LED select, brightness
control and sub/main control.
The datasheet can be found at http://www.ti.com/product/lm3509.
Signed-off-by: Patrick Gansterer <paroga@paroga.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240526105136.721529-3-paroga@paroga.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
`dev->of_node` already has a reference to the device_node and calling
of_node_get on it is unnecessary. All conresponding calls to
of_node_put are also removed.
Signed-off-by: Shresth Prasad <shresthprasad7@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240502172121.8695-2-shresthprasad7@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The mp3309 has two configuration registers, named according to their
address (0x00 and 0x01).
In the second register (0x01), the bit DIMS (Dimming Mode Select) must
be always 0 (zero), in both analog (via I2C commands) and PWM dimming
mode.
In the initial driver version, the DIMS bit was set in PWM mode and
reset in analog mode.
But if the DIMS bit is set in pwm dimming mode and other devices are
connected on the same I2C bus, every I2C commands on the bus generates a
flickering on the LEDs powered by the mp3309c.
This change concerns the chip initialization and does not impact any
existing device-tree configuration.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240417153105.1794134-2-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240327174714.519577-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The backlight driver supports getting passed platform data. However this
isn't used. This allows to remove quite some dead code from the driver
because bl->pdata is always NULL, and so bl->mode is always
LP8788_BL_REGISTER_ONLY.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240329133839.550065-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the lcd_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/2024032809-enchanted-conducive-3677@gregkh
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the backlight_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240305-class_cleanup-backlight-v1-1-c0e15cc25be1@marliere.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The "num_levels" variable is used to store error codes from
device_property_count_u32() so it needs to be signed. This doesn't
cause an issue at runtime because devm_kcalloc() won't allocate negative
sizes. However, it's still worth fixing.
Fixes: b54c828bdba9 ("backlight: mp3309c: Make use of device properties")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/74347f67-360d-4513-8939-595e3c4764fa@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-backlight-auxdisplay-hid-fb-6.9' and 'ib-backlight-hid-fbdev-lcd-scripts-6.10' into ibs-for-backlight-merged
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-14-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-13-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-12-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-11-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-10-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-9-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-8-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-7-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-6-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-5-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-4-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-3-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' is not modified by core backlight code, so it can be
made const for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-2-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'struct lcd_ops' passed in lcd_device_register() is not modified by core
backlight code, so it can be made const for code safety. This allows
drivers to also define the structure as const.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240424-video-backlight-lcd-ops-v2-1-1aaa82b07bc6@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove the field fb_blank from struct backlight_properties and remove
all code that still sets or reads it. Backlight blank status is now
tracked exclusively in struct backlight_properties.state.
The core backlight code keeps the fb_blank and state fields in sync,
but doesn't do anything else with fb_blank. Several drivers initialize
fb_blank to FB_BLANK_UNBLANK to enable the backlight. This is already
the default for the state field. So we can delete the fb_blank code
from core and drivers and rely on the state field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Flavio Suligoi <f.suligoi@asem.it>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The backlight is on for fb_blank eq FB_BLANK_UNBLANK, or off for
any other value in fb_blank. But the field fb_blank in struct
backlight_properties is deprecated and should not be used any
longer.
Replace the test for fb_blank in omap's backlight code with a
simple boolean parameter and push the test into the update_status
helper. Instead of reading fb_blank directly, decode the backlight
device's status with backlight_is_blank().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The callback set_power in struct omap_backlight_config is not
implemented anywhere. Remove it from the structure and driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240319093915.31778-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace check_fb with controls_device in struct backlight_ops. The
new callback interface takes a Linux device instead of a framebuffer.
Resolves one of the dependencies of backlight.h on fb.h.
The few drivers that had custom implementations of check_fb can easily
use the framebuffer's Linux device instead. Update them accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20240305162425.23845-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
