summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2023-01-24usb: fotg210: Switch to use dev_err_probe()Andy Shevchenko
Switch to use dev_err_probe() to simplify the error paths and unify message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230120154437.22025-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: fotg210-udc: remove redundant error loggingAndy Shevchenko
A call to platform_get_irq() already prints an error on failure within its own implementation. So printing another error based on its return value in the caller is redundant and should be removed. The clean up also makes if condition block braces unnecessary. Remove that as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230120154437.22025-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: fotg210-hcd: Don't shadow error codes in store()Andy Shevchenko
kstrtox() along with regmap API can return different error codes based on circumstances. Don't shadow them when returning to the caller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230120154437.22025-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: fotg210-hcd: use sysfs_emit() to instead of scnprintf()Andy Shevchenko
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230120154437.22025-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24fotg210-udc: Improve device initializationFabian Vogt
Reset the device explicitly to get into a known state and also set the chip enable bit. Additionally, mask interrupts which aren't handled. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230123073508.2350402-4-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24fotg210-udc: Introduce and use a fotg210_ack_int functionFabian Vogt
This is in preparation of support for devices where interrupts are acked differently. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230123073508.2350402-3-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24fotg210-udc: Add missing completion handlerFabian Vogt
This is used when responding to GET_STATUS requests. Without this, it crashes on completion. Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230123073508.2350402-2-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: host: ehci-fsl: Use DRV_NAMEAlexander Stein
"fsl-ehci" is used for both MODULE_ALIAS and driver name. As they have to match use DRV_NAME in both locations. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230123100007.1479090-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-23Merge 6.2-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-22Merge 6.2-rc5 into tty-nextGreg Kroah-Hartman
We need the serial/tty changes into this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-21Merge tag 'usb-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of small USB and Thunderbolt driver fixes and new device id changes for 6.2-rc5. Included in here are: - thunderbolt bugfixes for reported problems - new usb-serial driver ids added - onboard_hub usb driver fixes for much-reported problems - xhci bugfixes - typec bugfixes - ehci-fsl driver module alias fix - iowarrior header size fix - usb gadget driver fixes All of these, except for the iowarrior fix, have been in linux-next with no reported issues. The iowarrior fix passed the 0-day testing and is a one digit change based on a reported problem in the driver (which was written to a spec, not the real device that is now available)" * tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 usb: host: ehci-fsl: Fix module alias usb: dwc3: fix extcon dependency usb: core: hub: disable autosuspend for TI TUSB8041 USB: fix misleading usb_set_intfdata() kernel doc usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() USB: gadget: Add ID numbers to configfs-gadget driver names usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail usb: gadget: g_webcam: Send color matching descriptor per frame usb: typec: altmodes/displayport: Use proper macro for pin assignment check usb: typec: altmodes/displayport: Fix pin assignment calculation usb: typec: altmodes/displayport: Add pin assignment helper usb: gadget: f_fs: Ensure ep0req is dequeued before free_request usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait usb: misc: onboard_hub: Move 'attach' work to the driver usb: misc: onboard_hub: Invert driver registration order usb: ucsi: Ensure connector delayed work items are flushed usb: musb: fix error return code in omap2430_probe() usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch) xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables ...
2023-01-20USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100Greg Kroah-Hartman
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should be 12, not 13. Cc: stable <stable@kernel.org> Fixes: 17a82716587e ("USB: iowarrior: fix up report size handling for some devices") Reported-by: Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20usb: host: ehci-fsl: Fix module aliasAlexander Stein
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20ARM: pxa: remove unused pxa3xx-ulpiArnd Bergmann
This was only used by the cm-x300 board, which is now gone. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-20ARM: pxa: remove unused board filesArnd Bergmann
The majority of all pxa board files has not been touched in a long time, and no users have spoken up in favor of keeping them around. This leaves only support for the platforms that were already converted to DT, as well as the gumstix and spitz/akita/borzoi machines that work in qemu and can still be converted to DT later. Cc: Ales Bardorfer <ales@i-tech.si> Cc: Ales Snuparek <snuparek@atlas.cz> Cc: Alex Osborne <ato@meshy.org> Cc: Alex Osborne <bobofdoom@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Ian Molton <spyro@f2s.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Michael Petchkovsky <mkpetch@internode.on.net> Cc: Nick Bane <nick@cecomputing.co.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Tomas Cech <sleep_walker@suse.cz> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-19Merge tag 'usb-serial-6.2-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.2-rc5 Here are some new device ids, mostly for Quectel modems. All have been in linux-next with no reported issues." * tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel EM05CN modem USB: serial: option: add Quectel EM05CN (SG) modem USB: serial: cp210x: add SCALANCE LPE-9000 device id USB: serial: option: add Quectel EC200U modem USB: serial: option: add Quectel EM05-G (RS) modem USB: serial: option: add Quectel EM05-G (GR) modem USB: serial: option: add Quectel EM05-G (CS) modem
2023-01-19tty: Call ->dtr_rts() parameter active consistentlyIlpo Järvinen
Convert various parameter names for ->dtr_rts() and related functions from onoff, on, and raise to active. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-12-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: Convert ->dtr_rts() to take bool argumentIlpo Järvinen
Convert the raise/on parameter in ->dtr_rts() to bool through the callchain. The parameter is used like bool. In USB serial, there remains a few implicit bool -> larger type conversions because some devices use u8 in their control messages. In moxa_tiocmget(), dtr variable was reused for line status which requires int so use a separate variable for status. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: Convert ->carrier_raised() and callchains to boolIlpo Järvinen
Return boolean from ->carrier_raised() instead of 0 and 1. Make the return type change also to tty_port_carrier_raised() that makes the ->carrier_raised() call (+ cd variable in moxa into which its return value is stored). Also cleans up a few unnecessary constructs related to this change: return xx ? 1 : 0; -> return xx; if (xx) return 1; return 0; -> return xx; Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19tty: Cleanup tty_port_set_initialized() bool parameterIlpo Järvinen
Make callers pass true/false consistently for bool val. Reviewed-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: dwc3: fix extcon dependencyArnd Bergmann
The dwc3 core support now links against the extcon subsystem, so it cannot be built-in when extcon is a loadable module: arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon': core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle' arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev' arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node' There was already a Kconfig dependency in the dual-role support, but this is now needed for the entire dwc3 driver. It is still possible to build dwc3 without extcon, but this prevents it from being set to built-in when extcon is a loadable module. Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: gadget: add WebUSB landing page supportJó Ágila Bitsch
There is a custom (non-USB IF) extension to the USB standard: https://wicg.github.io/webusb/ This specification is published under the W3C Community Contributor Agreement, which in particular allows to implement the specification without any royalties. The specification allows USB gadgets to announce an URL to landing page and describes a Javascript interface for websites to interact with the USB gadget, if the user allows it. It is currently supported by Chromium-based browsers, such as Chrome, Edge and Opera on all major operating systems including Linux. This patch adds optional support for Linux-based USB gadgets wishing to expose such a landing page. During device enumeration, a host recognizes that the announced USB version is at least 2.01, which means, that there are BOS descriptors available. The device than announces WebUSB support using a platform device capability. This includes a vendor code under which the landing page URL can be retrieved using a vendor-specific request. Previously, the BOS descriptors would unconditionally include an LPM related descriptor, as BOS descriptors were only ever sent when the device was LPM capable. As this is no longer the case, this patch puts this descriptor behind a lpm_capable condition. Usage is modeled after os_desc descriptors: echo 1 > webusb/use echo "https://www.kernel.org" > webusb/landingPage lsusb will report the device with the following lines: Platform Device Capability: bLength 24 bDescriptorType 16 bDevCapabilityType 5 bReserved 0 PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665} WebUSB: bcdVersion 1.00 bVendorCode 0 iLandingPage 1 https://www.kernel.org Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com> Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: misc: onboard_usb_hub: add VIA LAB VL817 hub supportAnand Moon
VIA LAB VL817 is a 4-port USB 3.1 hub and USB 2.0 root hub that has a reset pin to toggle and a 5.0V core supply exported though an integrated LDO is available for powering it. Add the support for this hub, for controlling the reset pin and the core power supply. Add USB device id's for USB 2.0 and USB 3.0 root hub. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230118044418.875-9-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub supportAnand Moon
Genesys Logic GL852G is a 4-port USB 2.0 STT hub that has a reset pin to toggle and a 5.0V core supply exported though an integrated LDO is available for powering it. Add the support for this hub, for controlling the reset pin and the core power supply. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230118044418.875-5-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: mtu3: fix the failure of qmu stopChunfeng Yun
This happens when do stress test of uvc stream on/off which will enable/disable endpoints. uvc has four tx requests, and may disable endpoint between queue tx requests as following: enable ep --> start qmu queue tx request0 queue tx request1 queue tx request2 --> resume qmu disable ep --> stop qmu may fail [1] queue tx request3 --> will resume qmu, may cause qmu can't work when enable ep next time [2] [1]: when the tx fifo has some data to transmit, and try to stop qmu (stop ep) meanwhile resume qmu (queue tx request), it may cause stop qmu timeout, then can be fixed by flushing fifo when stop qmu. [2]: it resumes qmu again, shall stop qmu again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reported-by: Min Guo <min.guo@mediatek.com> Link: https://lore.kernel.org/r/20230119033322.21426-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210-udc: Implement VBUS sessionLinus Walleij
Implement VBUS session handling for FOTG210. This is mainly used by the UDC driver which needs to call down to the FOTG210 core and enable/disable VBUS, as this needs to be handled outside of the HCD and UDC drivers, by platform specific glue code. The Gemini has a special bit in a system register to turn VBUS on and off so we implement this in the FOTG210 core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-7-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210-udc: Assign of_node and speed on startLinus Walleij
Follow the example set by other drivers to assign of_node and speed to the driver when binding, also print bound info akin to other UDC drivers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-6-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210: Check role register in coreLinus Walleij
Read the role register and check that we are in host/peripheral mode and issue warnings if we're not in the right role when probing respective driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-5-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210: Move clock handling to coreLinus Walleij
Grab the optional silicon block clock, prepare and enable it in the core before proceeding to prepare the host or peripheral driver. This saves duplicate code and also uses the simple devm_clk_get_optional_enabled() to do everything we really want to do. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-4-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210: Acquire memory resource in coreLinus Walleij
The subdrivers are obtaining and mapping the memory resource separately. Create a common state container for the shared resources and start populating this by acquiring the IO memory resource and remap it and pass this to the subdrivers for host and peripheral. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-3-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19usb: fotg210: List different variantsLinus Walleij
There are at least two variants of the FOTG: FOTG200 and FOTG210. Handle them in this driver and let's add more quirks as we go along. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230103-gemini-fotg210-usb-v2-2-100388af9810@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: core: hub: disable autosuspend for TI TUSB8041Flavio Suligoi
The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: cdnsp: : add scatter gather support for ISOC endpointPawel Laszczak
Patch implements scatter gather support for isochronous endpoint. This fix is forced by 'commit e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support")'. After this fix CDNSP driver stop working with UVC class. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221222090934.145140-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: maxim_contaminant: Implement check_contaminant callbackBadhri Jagan Sridharan
Maxim TCPC has additional ADCs and low current(1ua) current source to measure the impedance of CC and SBU pins. When tcpm invokes the check_contaminant callback, Maxim TCPC measures the impedance of the CC & SBU pins and when the impedance measured is less than 1MOhm, it is assumed that USB-C port is contaminated. CC comparators are also checked to differentiate between presence of sink and contaminant. Once USB-C is deemed to be contaminated, MAXIM TCPC has additional hardware to disable normal DRP toggling cycle and enable 1ua on CC pins once every 2.4secs/4.8secs. Maxim TCPC interrupts AP once the impedance on the CC pin is above the 1MOhm threshold. The Maxim tcpc driver then signals TCPM_PORT_CLEAN to restart toggling. Renaming tcpci_maxim.c to tcpci_maxim_core.c and moving reg read/write helper functions to the tcpci_maxim.h header file. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230114093246.1933321-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tcpci: Add callback for evaluating contaminant presenceBadhri Jagan Sridharan
This change adds callback to evaluate presence of contaminant in the TCPCI layer. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230114093246.1933321-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tcpm: Add callbacks to mitigate wakeups due to contaminantBadhri Jagan Sridharan
On some of the TCPC implementations, when the Type-C port is exposed to contaminants, such as water, TCPC stops toggling while reporting OPEN either by the time TCPM reads CC pin status or during CC debounce window. This causes TCPM to be stuck in TOGGLING state. If TCPM is made to restart toggling, the behavior recurs causing redundant CPU wakeups till the USB-C port is free of contaminant. [206199.287817] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [206199.640337] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [206199.985789] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] (or) [ 7853.867577] Start toggling [ 7853.889921] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 7855.698765] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 7855.698790] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 7855.698826] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 7855.703559] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 7855.856555] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected] [ 7855.856581] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 7855.856613] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @ 170 ms [rev3 NONE_AMS] [ 7856.027744] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 170 ms] [ 7856.181949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 7856.187896] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 7857.645630] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 7857.647291] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 7857.647298] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 7857.647310] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 7857.808106] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected] [ 7857.808123] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 7857.808150] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @ 170 ms [rev3 NONE_AMS] [ 7857.978727] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 170 ms] To mitigate redundant TCPM wakeups, TCPCs which do have the needed hardware can implement the check_contaminant callback which is invoked by TCPM to evaluate for presence of contaminant. Lower level TCPC driver can restart toggling through TCPM_PORT_CLEAN event when the driver detects that USB-C port is free of contaminant. check_contaminant callback also passes the disconnect_while_debounce flag which when true denotes that the CC pins transitioned to OPEN state during the CC debounce window. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230114093246.1933321-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: Make bus switch code retimer-awarePrashant Malani
Since ports can have retimers associated with them, update the Type-C alternate mode bus code to also set retimer state when the switch state is updated. While we are here, make the typec_retimer_dev_type declaration in the retimer.h file as extern, so that the header file can be successfully included in the bus code without redeclaration compilation errors. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230112221609.540754-4-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: Add wrapper for bus switch set codePrashant Malani
Add a wrapper that calls the set() function for various switches associated with a port altmode. Right now, it just wraps the existing typec_mux_set() command, but it can be expanded to include other switches in future patches. No functional changes introduced by this patch. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230112221609.540754-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: Add retimer handle to port altmodePrashant Malani
Just like it does with muxes, the Type-C bus code can update the state of connected retimers (especially when altmode-related transitions occur). Add a retimer handle to the port altmode struct to enable this. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230112221609.540754-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: tegra: USB2 pad power controlsPetlozu Pravareshwar
Program USB2 pad PD controls during port connect/disconnect, port suspend/resume, and test mode, to reduce power consumption on disconnect or suspend. Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com> Co-developed-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-4-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: hub: export symbol on xhci_hub_controlJim Lin
XHCI host drivers may override the default xhci_hub_control() with their own device specific function. To allow these host drivers to call the xhci_hub_control() function from within their own hub_control() callback and be built as a module, export the symbol for xhci_hub_control. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-3-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add hub_control to xhci_driver_overridesJim Lin
Add a hub_control() callback to the xhci_driver_overrides structure to allow host drivers to override the default hub_control function. This is required for Tegra which requires device specific actions for power management to be executed during USB state transitions. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221111101813.32482-2-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: host: xhci-tegra: Add Tegra234 XHCI supportSing-Han Chen
This change adds Tegra234 XUSB host mode controller support. In Tegra234, some of the registers have moved to bar2 space. The new soc variable has_bar2 indicates the chip with bar2 area. This patch adds new reg helper to let the driver reuse the same code for those chips with bar2 support. Signed-off-by: Sing-Han Chen <singhanc@nvidia.com> Co-developed-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230111110450.24617-7-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: usb: Remove "default" from color matching attributesDaniel Scally
Color matching attributes in the configfs for UVC are named with the phrase "default". The implication of that is that they will only be used _with_ the default color matching descriptor, and that will shortly no longer be the case. Remove the "default" from the color matching descriptor attribute variables. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221213083736.2284536-2-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tipd: Support wakeupJun Nie
Enable wakeup when pluging or unpluging USB cable. It is up to other components to hold system in active mode, such as display, so that user can receive the notification. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230105075058.924680-2-jun.nie@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17USB: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20230106152828.3790902-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: udc: add Renesas RZ/N1 USBF controller supportHerve Codina
Add support for the Renesas USBF controller. This controller is an USB2.0 UDC controller available in the Renesas r9a06g032 SoC (RZ/N1 family). Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20230105152257.310642-4-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: intel_pmc_mux: Deduplicate ACPI matching in probeAndy Shevchenko
There is no need to call acpi_dev_present() followed by acpi_dev_get_first_match_dev() as they both do the same with only difference in the returning value. Instead, call the latter and check its result. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230102202933.15968-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: intel_pmc_mux: Don't leak the ACPI device reference countAndy Shevchenko
When acpi_dev_get_memory_resources() fails, the reference count is left bumped. Drop it as it's done in the other error paths. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230102202933.15968-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tcpci: Request IRQ with IRQF_SHAREDXu Yang
Under resource constraints, this interrupt may use other interrupt line or this interrupt line may be shared with other devices as long as they meet the sharing requirements. Besides, This irq flag will not cause other side effect if tcpci driver is the only user. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221214022334.2520677-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:50:56 +0000