summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2020-07-21usb: usbtest: reduce stack usage in test_queueBixuan Cui
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/usb/misc/usbtest.c: In function 'test_queue': drivers/usb/misc/usbtest.c:2148:1: warning: the frame size of 1232 bytes is larger than 1024 bytes Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/ffa85702-86ab-48d7-4da2-2efcc94b05d3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: tcpm: Stay in BIST mode till hardreset or unattachedBadhri Jagan Sridharan
Port starts to toggle when transitioning to unattached state. This is incorrect while in BIST mode. 6.4.3.1 BIST Carrier Mode Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object, the UUT Shall send out a continuous string of BMC encoded alternating "1"s and “0”s. The UUT Shall exit the Continuous BIST Mode within tBISTContMode of this Continuous BIST Mode being enabled(see Section 6.6.7.2). 6.4.3.2 BIST Test Data Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object, the UUT Shall return a GoodCRC Message and Shall enter a test mode in which it sends no further Messages except for GoodCRC Messages in response to received Messages. See Section 5.9.2 for the definition of the Test Data Frame. The test Shall be ended by sending Hard Reset Signaling to reset the UUT. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200716034128.1251728-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: tcpci: Support BIST test data mode for compliance.Badhri Jagan Sridharan
Quoting from TCPCI spec: "Setting this bit to 1 is intended to be used only when a USB compliance tester is using USB BIST Test Data to test the PHY layer of the TCPC. The TCPM should clear this bit when a disconnect is detected. 0: Normal Operation. Incoming messages enabled by RECEIVE_DETECT passed to TCPM via Alert. 1: BIST Test Mode. Incoming messages enabled by RECEIVE_DETECT result in GoodCRC response but may not be passed to the TCPM via Alert." Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200716034128.1251728-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: tcpm: Support bist test data mode for complianceBadhri Jagan Sridharan
TCPM supports BIST carried mode. PD compliance tests require BIST Test Data to be supported as well. Introducing set_bist_data callback to signal tcpc driver for configuring the port controller hardware to enable/disable BIST Test Data mode. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200716034128.1251728-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: tcpm: Error handling for tcpm_register_partner_altmodesKyle Tso
typec_partner_register_altmode returns ERR_PTR. Reset the pointer altmode to NULL on failure. Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200714033453.4044482-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: Comment correction for typec_partner_register_altmodeKyle Tso
typec_register_altmode returns ERR_PTR on failure. Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200714033453.4044482-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: typec: intel_pmc_mux: Avoid connect request on disconnectPrashant Malani
When pmc_usb_mux_set() is invoked when a device is disconnected, a valid scenario is for state->alt == NULL and state->mode == TYPEC_STATE_USB. In such cases, if a pmc_usb_disconnect() has already been issued (from either pmc_usb_set_orientation() when orientation == TYPEC_ORIENTATION_NONE, or pmc_usb_set_role() when role == USB_ROLE_NONE), a pmc_usb_connect() will be issued despite no peripheral being present. This confuses the PMC and leads to all subsequent PMC IPC requests returning errors due to timeout. To prevent this, return early if the port orientation or role is already set to none. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Rajmohan Mani <rajmohan.mani@intel.com> Fixes: f3c1c41ebc67 ("usb: typec: intel_pmc_mux: Add support for USB4") Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20200709002441.1309189-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: core: fix quirks_param_set() writing to a const pointerKars Mulder
The function quirks_param_set() takes as argument a const char* pointer to the new value of the usbcore.quirks parameter. It then casts this pointer to a non-const char* pointer and passes it to the strsep() function, which overwrites the value. Fix this by creating a copy of the value using kstrdup() and letting that copy be written to by strsep(). Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl> Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21usb: hcd: Try MSI interrupts on PCI devicesAndy Shevchenko
It appears that some platforms share same IRQ line between several devices, some of which are EHCI and OHCI controllers. This is neither practical nor performance-wise, especially in the case when they are supporting MSI. In order to improve the situation try to allocate MSI and fallback to legacy IRQ if no MSI available. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200702143045.23429-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21USB: serial: qcserial: add EM7305 QDL product IDErik Ekman
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by: Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-21USB: serial: iuu_phoenix: fix led-activity helpersJohan Hovold
The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()). The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode. In xmas mode, a related off-by-one error left the frequency field uninitialised. Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Reported-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20Merge 5.8-rc6 into tty-nextGreg Kroah-Hartman
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16Merge tag 'usb-serial-5.8-rc6' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.8-rc6 Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix. * tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: iuu_phoenix: fix memory corruption
2020-07-16USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold
The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-15usb: misc: sisusbvga: Move static const tables out to different include fileLee Jones
sisusb_init.h is included by multiple source files, but the big data tables contained are only referenced by one of them, leaving the tables 'defined but not used' by the remainder. We have a choice to either place them inside the source file, taking up may lines and potentially overwhelming the source file OR tuck them away neatly inside their own headerfile. The latter was chosen. Fixes the following W=1 kernel build warning(s): In file included from drivers/usb/misc/sisusbvga/sisusb.c:54: drivers/usb/misc/sisusbvga/sisusb_init.h:664:34: warning: ‘SiSUSB_VCLKData’ defined but not used [-Wunused-const-variable=] 664 | static const struct SiS_VCLKData SiSUSB_VCLKData[] = { | ^~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:406:35: warning: ‘SiSUSB_CRT1Table’ defined but not used [-Wunused-const-variable=] 406 | static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = { | ^~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:348:30: warning: ‘SiSUSB_RefIndex’ defined but not used [-Wunused-const-variable=] 348 | static const struct SiS_Ext2 SiSUSB_RefIndex[] = { | ^~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:269:29: warning: ‘SiSUSB_EModeIDTable’ defined but not used [-Wunused-const-variable=] 269 | static const struct SiS_Ext SiSUSB_EModeIDTable[] = { | ^~~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:238:36: warning: ‘SiSUSB_StandTable’ defined but not used [-Wunused-const-variable=] 238 | static const struct SiS_StandTable SiSUSB_StandTable[] = { | ^~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:201:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=] 201 | static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = { | ^~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:196:28: warning: ‘SiSUSB_SModeIDTable’ defined but not used [-Wunused-const-variable=] 196 | static const struct SiS_St SiSUSB_SModeIDTable[] = { | ^~~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:183:28: warning: ‘SiS_VGA_DAC’ defined but not used [-Wunused-const-variable=] 183 | static const unsigned char SiS_VGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:172:28: warning: ‘SiS_EGA_DAC’ defined but not used [-Wunused-const-variable=] 172 | static const unsigned char SiS_EGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:161:28: warning: ‘SiS_CGA_DAC’ defined but not used [-Wunused-const-variable=] 161 | static const unsigned char SiS_CGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:150:28: warning: ‘SiS_MDA_DAC’ defined but not used [-Wunused-const-variable=] 150 | static const unsigned char SiS_MDA_DAC[] = { | ^~~~~~~~~~~ Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-9-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: misc: sisusbvga: sisusb_init: Remove genunine unused static const arraysLee Jones
These are not referenced anywhere in the kernel. Fixes the following W=1 kernel build warning(s): drivers/usb/misc/sisusbvga/sisusb_init.h:171:29: warning: ‘ModeIndex_1280x1024’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:170:29: warning: ‘ModeIndex_1280x768’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:169:29: warning: ‘ModeIndex_1280x720’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:168:29: warning: ‘ModeIndex_1152x864’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:167:29: warning: ‘ModeIndex_1024x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:166:29: warning: ‘ModeIndex_1024x768’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:165:29: warning: ‘ModeIndex_960x600’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:164:29: warning: ‘ModeIndex_960x540’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:163:29: warning: ‘ModeIndex_856x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:162:29: warning: ‘ModeIndex_848x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:161:29: warning: ‘ModeIndex_800x600’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:160:29: warning: ‘ModeIndex_800x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:159:29: warning: ‘ModeIndex_768x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:158:29: warning: ‘ModeIndex_720x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:157:29: warning: ‘ModeIndex_720x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:156:29: warning: ‘ModeIndex_640x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:155:29: warning: ‘ModeIndex_640x400’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:154:29: warning: ‘ModeIndex_512x384’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:153:29: warning: ‘ModeIndex_400x300’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:152:29: warning: ‘ModeIndex_320x240’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:151:29: warning: ‘ModeIndex_320x200’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:232:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=] Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-8-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: c67x00: c67x00-hcd: Demote obvious misuse of kerneldoc to standard ↵Lee Jones
comment blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'sie' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'int_status' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'msg' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:267: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_start' drivers/usb/c67x00/c67x00-hcd.c:279: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_stop' Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-7-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: class: cdc-wdm: Provide description for usb_cdc_wdm_register()'s ↵Lee Jones
manage_power arg A good attempt was made to document everything else. Fixes the following W=1 kernel build warning(s): drivers/usb/class/cdc-wdm.c:961: warning: Function parameter or member 'manage_power' not described in 'usb_cdc_wdm_register' Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: mtu3: mtu3_trace: Supply missing mtu3_debug.h include fileLee Jones
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_trace.c:13:6: warning: no previous prototype for ‘mtu3_dbg_trace’ [-Wmissing-prototypes] 13 | void mtu3_dbg_trace(struct device *dev, const char *fmt, ...) | ^~~~~~~~~~~~~~ Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-5-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: mtu3: mtu3_trace: Function headers are not suitable for kerneldocLee Jones
Kerneldoc headers should only be used to document functions and data structures. Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-4-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: dwc2: gadget: Avoid pointless read of EP control registerLee Jones
Commit ec1f9d9f01384 ("usb: dwc2: gadget: parity fix in isochronous mode") moved these checks to dwc2_hsotg_change_ep_iso_parity() back in 2015. The assigned value hasn't been read back since. Let's remove the unnecessary H/W read. Fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_hsotg_epint’: drivers/usb/dwc2/gadget.c:2981:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable] 2981 | u32 ctrl; | ^~~~ Cc: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20200715093209.3165641-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: dwc2: gadget: Make use of GINTMSK2Lee Jones
The value obtained from GINTSTS2 should be masked with the GINTMSK2 value. Looks like this has been broken since dwc2_gadget_wkup_alert_handler() was added back in 2018. Also fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_wkup_alert_handler’: drivers/usb/dwc2/gadget.c:259:6: warning: variable ‘gintmsk2’ set but not used [-Wunused-but-set-variable] 259 | u32 gintmsk2; | ^~~~~~~~ Cc: Ben Dooks <ben@simtec.co.uk> Fixes: 187c5298a1229 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20200715093209.3165641-2-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15USB: musb: Remove unused inline functionYueHaibing
It is never used, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200715031204.17308-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15USB: sisusbvga: Fix a potential UB casued by left shifting a negative valueChangming Liu
The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer. Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB. Signed-off-by: Changming Liu <charley.ashbringer@gmail.com> Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15USB: Remove pci-dma-compat wrapper APIs.Suraj Upadhyay
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Link: https://lore.kernel.org/r/20200714115249.GA8563@blackclown Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: gadget: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200710190919.31464-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: phy: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200710191842.32561-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: dwc3: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200711135804.19735-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: host: xhci-plat: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200711135813.19798-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: typec: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200711135825.19862-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15USB: ohci: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713092314.32774-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-14USB: serial: sierra: clean up special-interface handlingJohan Hovold
Clean up the handling of special interfaces that either should be ignored or that need a larger number of URBs. Commit 66f092ed3b94 ("USB: serial: sierra: unify quirk handling logic") replaced the previous is_blacklisted() and is_highmemory() helpers with a single is_quirk() helper which made it even harder to understand what the interface lists were used for. Rename the interface-list struct, its members and the interface-lookup helper and restructure the code somewhat in order to make it more self-explanatory. Link: https://lore.kernel.org/r/20200713153936.18032-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: use in-kernel types in port dataJohan Hovold
The port data is not exported to user space so use the in-kernel u8 type. Link: https://lore.kernel.org/r/20200713105517.27796-6-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: drop unnecessary packed attributesJohan Hovold
Drop unnecessary packed attributes from structs without padding. Link: https://lore.kernel.org/r/20200713105517.27796-5-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: add support for TIOCGICOUNTJohan Hovold
Enable TIOCGICOUNT to allow reading out the (unused) interrupt counters and error statistics. Note that modem-status events are currently left unimplemented as they appear to be buffered on at least CP2102 and therefore cannot be used to implement TIOCMIWAIT. Link: https://lore.kernel.org/r/20200713105517.27796-4-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: add support for line-status eventsJohan Hovold
Add support for line-status events that specifically can be used to detect and report parity errors. Enable the device's event-insertion mode whenever input-parity checking is requested. This will insert line and modem status events into the data stream. Note that modem-status changes appear to be buffered until a character is received (at least on CP2102) and support is therefore left unimplemented. On at least one type of these chips (CP2102), line breaks are not reported as expected either (regardless of whether SERIAL_BREAK_CHAR is set) so do not enable event-mode when !IGNBRK is requested for now. Link: https://lore.kernel.org/r/20200713105517.27796-3-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: disable interface on errors in openJohan Hovold
Try to disable the serial interface in the unlikely event that generic open() fails. Link: https://lore.kernel.org/r/20200713105517.27796-2-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-10Merge tag 'fixes-for-v5.8-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.8-rc3 Adding support for recent Intel devices (Tiger Lake and Jasper Lake) on dwc3. We have some endianess fixes in cdns3, a memleak fix in gr_udc and lock API usage fix in the legacy f_uac1 Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
2020-07-10USB: c67x00: fix use after free in c67x00_giveback_urbTom Rix
clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by: Tom Rix <trix@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10udc: lpc32xx: make symbol 'lpc32xx_usbddata' staticWei Yongjun
The sparse tool complains as follows: drivers/usb/gadget/udc/lpc32xx_udc.c:2989:25: warning: symbol 'lpc32xx_usbddata' was not declared. Should it be static? This variable is not used outside of lpc32xx_udc.c, so this commit marks it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200707105350.7064-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10usb: gadget: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707171500.GA13620@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10usb: host: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707195023.GA3792@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10USB: OHCI: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707195351.GA4061@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10usb: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707195607.GA4198@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10usb: phy: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707200040.GA4525@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usbip: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200707195214.GA3932@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09USB: storage: replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200708184903.17350-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: host: xhci-plat: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct usb_xhci_acpi_match becomes defined by unused. Fixes the following W=1 kernel build warning(s): drivers/usb/host/xhci-plat.c:457:36: warning: ‘usb_xhci_acpi_match’ defined but not used [-Wunused-const-variable=] 457 | static const struct acpi_device_id usb_xhci_acpi_match[] = { | ^~~~~~~~~~~~~~~~~~~ Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200706133341.476881-33-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 03:58:55 +0000