summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2016-09-09cdc-wdm: add terminating newlineOliver Neukum
Debug messages should be properly terminated. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09usb: Kconfig: move ulpi bus support out of hostPeter Chen
The ULPI bus is not only for host, but for device mode too, so move it out from host's Kconfig. Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09usb: dwc3: avoid -Wmaybe-uninitialized warningArnd Bergmann
Cleaning up the loop in dwc3_cleanup_done_reqs() introduced a gcc warning if built with "-Wmaybe-uninitialized": drivers/usb/dwc3/gadget.c: In function 'dwc3_endpoint_transfer_complete': drivers/usb/dwc3/gadget.c:2015:9: 'trb' may be used uninitialized in this function [-Wmaybe-uninitialized] I believe it is a false positive and we always have a valid 'trb' pointer at the end of the function, but neither I nor the compiler are able to prove that. This works around the warning by computing a flag earlier in the function when it's guaranteed to be valid, which tells the compiler that it's safe and makes it easier to understand to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 31162af447d7 ("usb: dwc3: gadget: avoid while (1) loop on completion") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: gadget: NCM: Protect dev->port_usb using dev->lockHarish Jenny K N
This commit incorporates findings from https://lkml.org/lkml/2016/4/25/594 The function has been modified to make sure we hold the dev lock when accessing the net device pointer. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: gadget: u_ether: fix another dereference after null checkHarish Jenny K N
dev->port_usb is checked for null pointer previously, so dev->port_usb might be null during no zlp check, fix it by adding null pointer check. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09Merge tag 'usb-ci-v4.8-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fix the possible kernel panic when the hardware signal is bad for chipidea udc.
2016-09-09usb: gadget: remove variable ret and remove unnecessary if statementColin Ian King
the if statement in lb_modinit is unnecessary so we can totally remove the variable ret and just return the return value from the call to usb_function_register. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phaseClemens Gruber
Problems with the signal integrity of the high speed USB data lines or noise on reference ground lines can cause the i.MX6 USB controller to violate USB specs and exhibit unexpected behavior. It was observed that USBi_UI interrupts were triggered first and when isr_setup_status_phase was called, ci->status was NULL, which lead to a NULL pointer dereference kernel panic. This patch fixes the kernel panic, emits a warning once and returns -EPIPE to halt the device and let the host get stalled. It also adds a comment to point people, who are experiencing this issue, to their USB hardware design. Cc: <stable@vger.kernel.org> #4.1+ Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-08usb: dwc2: Properly account for the force mode delaysJohn Youn
When a force mode bit is set and the IDDIG debounce filter is enabled, there is a delay for the forced mode to take effect. This delay is due to the IDDIG debounce filter and is variable depending on the platform's PHY clock speed. To account for this delay we can poll for the expected mode. On a clear force mode, since we don't know what mode to poll for, delay for a fixed 100 ms. This is the maximum delay based on the slowest PHY clock speed. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-08usb: dwc2: Add delay to core soft resetJohn Youn
Add a delay to the core soft reset function to account for the IDDIG debounce filter. If the current mode is host, either due to the force mode bit being set (which persists after core reset) or the connector id pin, a core soft reset will temporarily reset the mode to device and a delay from the IDDIG debounce filter will occur before going back to host mode. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-08usb: dwc2: gadget: Only initialize device if in device modeJohn Youn
In dwc2_hsotg_udc_start(), don't initialize the controller for device mode unless we are actually in device mode. Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-08usb: gadget: f_fs: Stop ffs_closed NULL pointer dereferenceJim Baxter
The struct ffs_data::private_data has a pointer to ffs_dev stored in it during the ffs_fs_mount() function however it is not cleared when the ffs_dev is freed later which causes the ffs_closed function to crash with "Unable to handle kernel NULL pointer dereference" error when using the data in ffs_data::private_data. This clears this pointer during the ffs_free_dev clean up function. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-08xhci: fix null pointer dereference in stop command timeout functionMathias Nyman
The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: dwc3: pci: fix build warning on !PM_SLEEPFelipe Balbi
When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-07usb: dwc3: Fix dr_mode validationThinh Nguyen
This patch follows the similar fix in dwc2. See commit 5268ed9d2e3b ("usb: dwc2: Fix dr_mode validation") Currently, the dr_mode is only checked against the module configuration. It also needs to be checked against the hardware capablities. The driver now checks if both the module configuration and hardware are capable of the dr_mode value. If not, then it will issue a warning and fall back to a supported value. If it is unable to fall back to a suitable value, then the probe will fail. Behavior summary: module : actual HW config dr_mode : dr_mode --------------------------------- host host any : host host dev any : INVALID host otg any : host dev host any : INVALID dev dev any : dev dev otg any : dev otg host any : host otg dev any : dev otg otg any : dr_mode Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: dwc3: ulpi: make dwc3_ulpi_ops constantTal Shorer
ulpi_register_interface() accepts a const struct ulpi_ops and dwc3 doesn't perform any changes to this struct at runtime, so there's no reason it shouldn't be constant. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: make ops struct constantTal Shorer
None of the core ulpi functions perform any changes to the operations struct, and logically as a struct that contains function pointers there's no reason it shouldn't be constant. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: remove "dev" field from struct ulpi_opsTal Shorer
Operations now use ulpi->dev.parent directly instead of via the ulpi_ops struct, making this field unused. Remove it. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: rename operations {read|write}_dev to simply {read|write}Tal Shorer
With the removal of the old {read|write} operations, we can now safely rename the new api operations {read|write}_dev to use the shorter and clearer names {read|write}, respectively. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: remove calls to old api callbacksTal Shorer
Now that all users use the new api callbacks, remove the old api callbacks and force new interface drivers to use the new api. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: dwc3: ulpi: use new apiTal Shorer
The old read, write callbacks in struct ulpi_ops have been deprecated in favor of new callbacks that pass the parent device directly. Replace the used callbacks in dwc3's ulpi component with the new api. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: add new api functions, {read|write}_dev()Tal Shorer
Add these two new api callbacks to struct ulpi_ops. These are different than read, write in that they pass the parent device directly instead of via the ops argument. They are intended to replace the old api functions. If the new api callbacks are missing, revert to calling the old ones as before. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: move setting of ulpi->dev parent up in ulpi_register()Tal Shorer
Once ulpi operations use the parent device directly, this will be needed during the operations used in ulpi_register() itself, so set the parent field before calling any ulpi operations. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: gadget: prevent potenial null pointer dereference on skb->lenColin Ian King
An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS conditionYoshihiro Shimoda
The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: phy: phy-generic: Check clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CONYoshihiro Shimoda
This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05Revert "usb: dwc3: gadget: always decrement by 1"John Youn
This reverts commit 6f8245b4e37c ("usb: dwc3: gadget: always decrement by 1"). We can't always decrement this value. We should decrement only if the calculation of free slots results in a LINK TRB being among one of the free slots (dequeue < enqueue). Otherwise, if the LINK TRB is not among the free slots then it should not be decremented. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05Merge 4.8-rc5 into usb-testingGreg Kroah-Hartman
We want the USB fixes in here for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02usb: gadget: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02usb: core: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31usb: dwc2: gadget: free TX FIFO after killing requestsRobert Baldyga
As kill_all_requests() potentially flushes TX FIFO, we should should free FIFO after calling it. Otherwise FIFO could stay unflushed properly. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: dwc2: gadget: remove dead code from dwc2_hsotg_ep_enable()Robert Baldyga
Since FIFO is always freed in dwc2_hsotg_ep_disable(), ep->fifo_index is always 0 in dwc2_hsotg_ep_enable(), hence code inside if() block is never executed. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: dwc2: gadget: change variable name to more meaningfulRobert Baldyga
Since we handle FIFOs and endpoint separately, using variable named 'ep' in context of FIFO is misleading, hence we rename it to 'fifo'. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: dwc2: gadget: fix TX FIFO size and address initializationRobert Baldyga
According to DWC2 documentation, DPTxFSize field of DPTXFSIZn register is read only, which means that software cannot change FIFO size. Register description says: "The value of this register is the Largest Device Mode Periodic Tx Data FIFO Depth (parameter OTG_TX_DPERIO_DFIFO_DEPTH_n), as specified during coreConsultant configuration." That means, that we have to setup only FIFO start addresses (DPTxFStAddr), taking into account reset values of DPTxFSize. Initialize FIFO start addresses properly and remove unneeded core related to incorrect FIFO size initialization. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: dwc2: gadget: use ep->fifo_index in context of FIFO registersRobert Baldyga
In context of FIFO registers we use ep->fifo_index instead of ep->index. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: configfs: log function unbinding as debugRomain Izard
Disabling USB gadget functions configured through configfs is something that can happen in normal use cases. Keep the existing log for this type of event, but only as debug, not as an error. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: uvc: Add missing call for additional setup dataPetr Cvek
Some UVC commands require additional data (non zero uvc->event_length). Add usb_ep_queue() call, so uvc_function_ep0_complete() can be called and send received data to the userspace. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: renesas_usbhs: set quirk_avoids_skb_reserve if USB-DMAC is usedYoshihiro Shimoda
This patch sets the quirk_avoids_skb_reserve flag to improve performance of a network gadget driver (e.g. f_ncm.c) if USB-DMAC is used. For example (on r8a7795 board + f_ncm.c + iperf udp mode / receiving): - without this patch: 90.3 Mbits/sec - with this patch: 273 Mbits/sec Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: f_ncm: add support for no_skb_reserveYoshihiro Shimoda
This patch adds to support no_skb_reserve function to improve performance for some platforms. About the detail, please refer to the commit log of "quirk_avoids_skb_reserve" in include/linux/usb/gadget.h. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: u_ether: add a flag to avoid skb_reserve() callingYoshihiro Shimoda
This patch adds a flag "no_skb_reserve" in struct eth_dev. So, if a peripheral driver sets the quirk_avoids_skb_reserve flag, upper network gadget drivers (e.g. f_ncm.c) can avoid skb_reserve() calling using the flag as well. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: net2280: fix typo: "Inavlid" -> "Invalid"Colin Ian King
trivial typo fix in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: renesas_usbhs: add a compatible string for r8a7796Yoshihiro Shimoda
This patch adds support for r8a7796 (R-Car M3-W). Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-30usb: usbip: vudc: fix left shift overflowNicolas Iooss
In v_recv_cmd_submit(), urb_p->urb->pipe has the type unsigned int (which is 32-bit long on x86_64) but 11<<30 results in a 34-bit integer. Therefore the 2 leading bits are truncated and urb_p->urb->pipe &= ~(11 << 30); has the same meaning as urb_p->urb->pipe &= ~(3 << 30); This second statement seems to be how the code was intended to be written, as PIPE_ constants have values between 0 and 3. The overflow has been detected with a clang warning: drivers/usb/usbip/vudc_rx.c:145:27: warning: signed shift result (0x2C0000000) requires 35 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] urb_p->urb->pipe &= ~(11 << 30); ~~ ^ ~~ Fixes: 79c02cb1fd5c ("usbip: vudc: Add vudc_rx") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30USB: ohci-omap - avoid including mach/irqs.hRussell King
ohci-omap doesn't need to include mach/irqs.h - nothing within this driver needs anything from this header file. Remove this include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: ohci-sa1111: remove mach/hardware.h includeRussell King
The mach/hardware.h include doesn't seem to be necessary to build ohci-sa1111, so let's remove it to kill off an unnecessary platform specific include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: ohci-sa1111: remove machine_has_neponset()Russell King
The neponset is a daughter board for the Assabet platform, which has a SA1111 chip on it. If we're initialising the SA1111 OHCI, and we're part of a neponset, the host platform must be an Assabet. This allows us to eliminate machine_has_neponset() from this driver, replacing it instead with machine_is_assabet(), and killing the mach/assabet.h include. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: ohci-at91: Forcibly suspend ports while USB suspendWenyou Yang
The usb controller does not manage correctly the suspend mode for the ehci. In echi mode, there is no way to suspend without any device connected to it. This is why this specific control is added to fix this issue. Since the suspend mode works in ohci mode, this specific control works by suspend the usb controller in ohci mode. This specific control is by setting the SUSPEND_A/B/C fields of SFR_OHCIICR(OHCI Interrupt Configuration Register) in the SFR while the OHCI USB suspend. This set operation must be done before the USB clock disabled, clear operation after the USB clock enabled. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: wusbcore: wa-nep: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: wusbcore: security: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 22:48:30 +0000