summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2024-04-27USB: serial: option: add Rolling RW101-GL and RW135-GL supportVanillan Wang
commit 311f97a4c7c22a01f8897bddf00428dfd0668e79 upstream. Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27USB: serial: option: support Quectel EM060K sub-modelsJerry Meng
commit c840244aba7ad2b83ed904378b36bd6aef25511c upstream. EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, having the same name "Quectel EM060K-GL" and the same interface layout. MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0129 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27USB: serial: option: add Lonsung U8300/U9300 productCoia Prant
commit cf16ffa17c398434a77b8a373e69287c95b60de2 upstream. Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Reviewed-by: Lars Melin <larsm17@gmail.com> [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27USB: serial: option: add support for Fibocom FM650/FG650Chuanhong Guo
commit fb1f4584b1215e8c209f6b3a4028ed8351a0e961 upstream. Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27USB: serial: option: add Fibocom FM135-GL variantsbolan wang
commit 356952b13af5b2c338df1e06889fd1b5e12cbbf4 upstream. Update the USB serial option driver support for the Fibocom FM135-GL LTE modules. - VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: mbim, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0115 Rev=05.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: bolan wang <bolan.wang@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27usb: new quirk to reduce the SET_ADDRESS request timeoutHardik Gajjar
[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ] This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27usb: xhci: Add timeout argument in address_device USB HCD callbackHardik Gajjar
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13usb: sl811-hcd: only defined function checkdone if QUIRK2 is definedColin Ian King
[ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ] Function checkdone is only required if QUIRK2 is defined, so add appropriate #if / #endif around the function. Cleans up clang scan build warning: drivers/usb/host/sl811-hcd.c:588:18: warning: unused function 'checkdone' [-Wunused-function] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13usb: typec: tcpci: add generic tcpci fallback compatibleMarco Felsch
[ Upstream commit 8774ea7a553e2aec323170d49365b59af0a2b7e0 ] The driver already support the tcpci binding for the i2c_device_id so add the support for the of_device_id too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240222210903.208901-3-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13usb: typec: ucsi: Limit read size on v1.2Abhishek Pandit-Subedi
[ Upstream commit b3db266fb031fba88c423d4bb8983a73a3db6527 ] Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was increased from 16 to 256. In order to avoid overflowing reads for older systems, add a mechanism to use the read UCSI version to truncate read sizes on UCSI v1.2. Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Link: https://lore.kernel.org/r/20240209143723.v5.1.Iacf5570a66b82b73ef03daa6557e2fc0db10266a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13usb: gadget: uvc: mark incomplete frames with UVC_STREAM_ERRMichael Grzeschik
[ Upstream commit 2a3b7af120477d0571b815ccb8600cafd5ebf02f ] If an frame was transmitted incomplete to the host, we set the UVC_STREAM_ERR bit in the header for the last request that is going to be queued. This way the host will know that it should drop the frame instead of trying to display the corrupted content. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240214-uvc-error-tag-v1-2-37659a3877fe@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10usb: typec: ucsi: Fix race between typec_switch and role_switchKrishna Kurapati
[ Upstream commit f5e9bda03aa50ffad36eccafe893d004ef213c43 ] When orientation switch is enabled in ucsi glink, there is a xhci probe failure seen when booting up in host mode in reverse orientation. During bootup the following things happen in multiple drivers: a) DWC3 controller driver initializes the core in device mode when the dr_mode is set to DRD. It relies on role_switch call to change role to host. b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a normal routine. It relies on the typec_switch_set call to get notified of orientation changes. c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and provides initial role switch to dwc3 controller. When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE, then we see the following things happening in order: a) UCSI gives initial role as host to dwc3 controller ucsi_register_port. Upon receiving this notification, the dwc3 core needs to program GCTL from PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL Core soft reset and waits for it to be completed before shifting it to host. Only after the reset is done will the dwc3_host_init be invoked and xhci is probed. DWC3 controller expects that the usb phy's are stable during this process i.e., the phy init is already done. b) During the 100ms wait for GCTL core soft reset, the actual notification from PPM is received by ucsi_glink via pmic glink for changing role to host. The pmic_glink_ucsi_notify routine first sends the orientation change to QMP and then sends role to dwc3 via ucsi framework. This is happening exactly at the time GCTL core soft reset is being processed. c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it then re-programs the phy at the instant GCTL core soft reset has been asserted by dwc3 controller due to which the QMP PLL lock fails in qmp_combo_usb_power_on. d) After the 100ms of GCTL core soft reset is completed, the dwc3 core goes for initializing the host mode and invokes xhci probe. But at this point the QMP is non-responsive and as a result, the xhci plat probe fails during xhci_reset. Fix this by passing orientation switch to available ucsi instances if their gpio configuration is available before ucsi_register is invoked so that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP, the lane is already configured and the call would be a NOP thus not racing with role switch. Cc: stable@vger.kernel.org Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events") Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03usb: dwc3: pci: Drop duplicate IDHeikki Krogerus
commit f121531703ae442edc1dde4b56803680628bc5b7 upstream. Intel Arrow Lake CPU uses the Meteor Lake ID with this controller (the controller that's part of the Intel Arrow Lake chipset (PCH) does still have unique PCI ID). Fixes: de4b5b28c87c ("usb: dwc3: pci: add support for the Intel Arrow Lake-H") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240312115008.1748637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before resetChristian A. Ehrhardt
commit 3de4f996a0b5412aa451729008130a488f71563e upstream. Check the UCSI_CCI_RESET_COMPLETE complete flag before starting another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear the flag if it is set. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: ucsi_acpi: Refactor and fix DELL quirkChristian A. Ehrhardt
commit 6aaceb7d9cd00f3e065dc4b054ecfe52c5253b03 upstream. Some DELL systems don't like UCSI_ACK_CC_CI commands with the UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE bit set. The current quirk still leaves room for races because it requires two consecutive ACK commands to be sent. Refactor and significantly simplify the quirk to fix this: Send a dummy command and bundle the connector change ack with the command completion ack in a single UCSI_ACK_CC_CI command. This removes the need to probe for the quirk. While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c and don't re-use definitions from ucsi.h for struct ucsi->flags. Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: ucsi: Ack unsupported commandsChristian A. Ehrhardt
commit 6b5c85ddeea77d18c4b69e3bda60e9374a20c304 upstream. If a command completes the OPM must send an ack. This applies to unsupported commands, too. Send the required ACK for unsupported commands. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: ucsi: Clear EVENT_PENDING under PPM lockChristian A. Ehrhardt
commit 15b2e71b4653b3e13df34695a29ebeee237c5af2 upstream. Suppose we sleep on the PPM lock after clearing the EVENT_PENDING bit because the thread for another connector is executing a command. In this case the command completion of the other command will still report the connector change for our connector. Clear the EVENT_PENDING bit under the PPM lock to avoid another useless call to ucsi_handle_connector_change() in this case. Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: Return size of buffer if pd_set operation succeedsKyle Tso
commit 53f5094fdf5deacd99b8655df692e9278506724d upstream. The attribute writing should return the number of bytes used from the buffer on success. Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso <kyletso@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240319074309.3306579-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: udc: remove warning when queue disabled epyuan linyu
commit 2a587a035214fa1b5ef598aea0b81848c5b72e5e upstream. It is possible trigger below warning message from mass storage function, WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104 pc : usb_ep_queue+0x7c/0x104 lr : fsg_main_thread+0x494/0x1b3c Root cause is mass storage function try to queue request from main thread, but other thread may already disable ep when function disable. As there is no function failure in the driver, in order to avoid effort to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug(). Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: yuan linyu <yuanlinyu@hihonor.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240315020144.2715575-1-yuanlinyu@hihonor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc2: gadget: LPM flow fixMinas Harutyunyan
commit 5d69a3b54e5a630c90d82a4c2bdce3d53dc78710 upstream. Added functionality to exit from L1 state by device initiation using remote wakeup signaling, in case when function driver queuing request while core in L1 state. Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state") Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc2: gadget: Fix exiting from clock gatingMinas Harutyunyan
commit 31f42da31417bec88158f3cf62d19db836217f1e upstream. Added exiting from the clock gating mode on USB Reset Detect interrupt if core in the clock gating mode. Added new condition to check core in clock gating mode or no. Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt") Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt") Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue") Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc2: host: Fix ISOC flow in DDMA modeMinas Harutyunyan
commit b258e42688501cadb1a6dd658d6f015df9f32d8f upstream. Fixed ISOC completion flow in DDMA mode. Added isoc descriptor actual length value and update urb's start_frame value. Fixed initialization of ISOC DMA descriptors flow. Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver") Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel") Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame") Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver") Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc2: host: Fix hibernation flowMinas Harutyunyan
commit 3c7b9856a82227db01a20171d2e24c7ce305d59b upstream. Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi, HCTSIZi, HCDMAi and HCDMABi. Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions") Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc2: host: Fix remote wakeup from hibernationMinas Harutyunyan
commit bae2bc73a59c200db53b6c15fb26bb758e2c6108 upstream. Starting from core v4.30a changed order of programming GPWRDN_PMUACTV to 0 in case of exit from hibernation on remote wakeup signaling from device. Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03USB: core: Fix deadlock in port "disable" sysfs attributeAlan Stern
commit f4d1960764d8a70318b02f15203a1be2b2554ca1 upstream. The show and store callback routines for the "disable" sysfs attribute file in port.c acquire the device lock for the port's parent hub device. This can cause problems if another process has locked the hub to remove it or change its configuration: Removing the hub or changing its configuration requires the hub interface to be removed, which requires the port device to be removed, and device_del() waits until all outstanding sysfs attribute callbacks for the ports have returned. The lock can't be released until then. But the disable_show() or disable_store() routine can't return until after it has acquired the lock. The resulting deadlock can be avoided by calling sysfs_break_active_protection(). This will cause the sysfs core not to wait for the attribute's callback routine to return, allowing the removal to proceed. The disadvantage is that after making this call, there is no guarantee that the hub structure won't be deallocated at any moment. To prevent this, we have to acquire a reference to it first by calling hub_get(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/f7a8c135-a495-4ce6-bd49-405a45e7ea9a@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03USB: core: Add hub_get() and hub_put() routinesAlan Stern
commit ee113b860aa169e9a4d2c167c95d0f1961c6e1b8 upstream. Create hub_get() and hub_put() routines to encapsulate the kref_get() and kref_put() calls in hub.c. The new routines will be used by the next patch in this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/604da420-ae8a-4a9e-91a4-2d511ff404fb@rowland.harvard.edu Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03USB: core: Fix deadlock in usb_deauthorize_interface()Alan Stern
commit 80ba43e9f799cbdd83842fc27db667289b3150f5 upstream. Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun <samsun1006219@gmail.com> Reported by: xingwei lee <xrivendell7@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/linux-usb/CAEkJfYO6jRVC8Tfrd_R=cjO0hguhrV31fDPrLrNOOHocDkPoAA@mail.gmail.com/#r Fixes: 310d2b4124c0 ("usb: interface authorization: SysFS part of USB interface authorization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1c37eea1-9f56-4534-b9d8-b443438dc869@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: dwc3: Properly set system wakeupThinh Nguyen
commit f9aa41130ac69d13a53ce2a153ca79c70d43f39c upstream. If the device is configured for system wakeup, then make sure that the xHCI driver knows about it and make sure to permit wakeup only at the appropriate time. For host mode, if the controller goes through the dwc3 code path, then a child xHCI platform device is created. Make sure the platform device also inherits the wakeup setting for xHCI to enable remote wakeup. For device mode, make sure to disable system wakeup if no gadget driver is bound. We may experience unwanted system wakeup due to the wakeup signal from the controller PMU detecting connection/disconnection when in low power (D3). E.g. In the case of Steam Deck, the PCI PME prevents the system staying in suspend. Cc: stable@vger.kernel.org Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Closes: https://lore.kernel.org/linux-usb/70a7692d-647c-9be7-00a6-06fc60f77294@igalia.com/T/#mf00d6669c2eff7b308d1162acd1d66c09f0853c7 Fixes: d07e8819a03d ("usb: dwc3: add xHCI Host support") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Sanath S <Sanath.S@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/667cfda7009b502e08462c8fb3f65841d103cc0a.1709865476.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03USB: UAS: return ENODEV when submit urbs fail with device not attachedWeitao Wang
commit cd5432c712351a3d5f82512908f5febfca946ca6 upstream. In the scenario of entering hibernation with udisk in the system, if the udisk was gone or resume fail in the thaw phase of hibernation. Its state will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed and can't not handle disconnect event. Next, in the poweroff phase of hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk when poweroff this scsi device, which will cause uas_submit_urbs to be called to submit URB for sense/data/cmd pipe. However, these URBs will submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead the SCSI layer go into an ugly loop and system fail to go into hibernation. On the other hand, when we specially check for -ENODEV in function uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device poweroff fail and system shutdown instead of entering hibernation. To fix this issue, let uas_submit_urbs to return original generic error when submitting URB failed. At the same time, we need to translate -ENODEV to DID_NOT_CONNECT for the SCSI layer. Suggested-by: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: cdc-wdm: close race between read and workqueueOliver Neukum
commit 339f83612f3a569b194680768b22bf113c26a29d upstream. wdm_read() cannot race with itself. However, in service_outstanding_interrupt() it can race with the workqueue, which can be triggered by error handling. Hence we need to make sure that the WDM_RESPONDING flag is not just only set but tested. Fixes: afba937e540c9 ("USB: CDC WDM driver") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240314115132.3907-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03Revert "usb: phy: generic: Get the vbus supply"Alexander Stein
commit fdada0db0b2ae2addef4ccafe50937874dbeeebe upstream. This reverts commit 75fd6485cccef269ac9eb3b71cf56753341195ef. This patch was applied twice by accident, causing probe failures. Revert the accident. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Fixes: 75fd6485ccce ("usb: phy: generic: Get the vbus supply") Cc: stable <stable@kernel.org> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20240314092628.1869414-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03xhci: Fix failure to detect ring expansion need.Mathias Nyman
commit b234c70fefa7532d34ebee104de64cc16f1b21e4 upstream. Ring expansion checker may incorrectly assume a completely full ring is empty, missing the need for expansion. This is due to a special empty ring case where the dequeue ends up ahead of the enqueue pointer. This is seen when enqueued TRBs fill up exactly a segment, with enqueue then pointing to the end link TRB. Once those TRBs are handled the dequeue pointer will follow the link TRB and end up pointing to the first entry on the next segment, past the enqueue. This same enqueue - dequeue condition can be true if a ring is full, with enqueue ending on that last link TRB before the dequeue pointer on the next segment. This can be seen when queuing several ~510 small URBs via usbfs in one go before a single one is handled (i.e. dequeue not moved from first entry in segment). Expand the ring already when enqueue reaches the link TRB before the dequeue segment, instead of expanding it when enqueue moves into the dequeue segment. Reported-by: Chris Yokum <linux-usb@mail.totalphase.com> Closes: https://lore.kernel.org/all/949223224.833962.1709339266739.JavaMail.zimbra@totalphase.com Tested-by: Chris Yokum <linux-usb@mail.totalphase.com> Fixes: f5af638f0609 ("xhci: Fix transfer ring expansion size calculation") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240305132312.955171-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: port: Don't try to peer unused USB ports based on locationMathias Nyman
commit 69c63350e573367f9c8594162288cffa8a26d0d1 upstream. Unused USB ports may have bogus location data in ACPI PLD tables. This causes port peering failures as these unused USB2 and USB3 ports location may match. Due to these failures the driver prints a "usb: port power management may be unreliable" warning, and unnecessarily blocks port power off during runtime suspend. This was debugged on a couple DELL systems where the unused ports all returned zeroes in their location data. Similar bugreports exist for other systems. Don't try to peer or match ports that have connect type set to USB_PORT_NOT_USED. Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218490 Link: https://lore.kernel.org/r/20240222233343.71856-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: gadget: ncm: Fix handling of zero block length packetsKrishna Kurapati
commit f90ce1e04cbcc76639d6cba0fdbd820cd80b3c70 upstream. While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero. Cc: stable@vger.kernel.org Fixes: 427694cfaafa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: altmodes/displayport: create sysfs nodes as driver's default ↵RD Babiera
device attribute group commit 165376f6b23e9a779850e750fb2eb06622e5a531 upstream. The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03USB: usb-storage: Prevent divide-by-0 error in isd200_ata_commandAlan Stern
commit 014bcf41d946b36a8f0b8e9b5d9529efbb822f49 upstream. The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either the ATA_ID_HEADS or ATA_ID_SECTORS value in the device's ID information is 0. This requires isd200_Initialization() to return a negative error code when initialization fails; currently it always returns 0 (even when there is an error). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+28748250ab47a8f04100@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-usb/0000000000003eb868061245ba7f@google.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/b1e605ea-333f-4ac0-9511-da04f411763e@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: typec: tpcm: Fix PORT_RESET behavior for self powered devicesBadhri Jagan Sridharan
commit 197331b27ac890d0209232d5f669830cd00e8918 upstream. While commit 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") fixes the boot issues for bus powered devices such as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for self powered devices, thus preventing brown out for bus powered devices Adhering to spec is gaining more importance due to the Common charger initiative enforced by the European Union. Quoting from the spec: 4.5.2.2.2.1 ErrorRecovery State Requirements The port shall not drive VBUS or VCONN, and shall present a high-impedance to ground (above zOPEN) on its CC1 and CC2 pins. Hi-Zing the CC pins is the inteded behavior for PORT_RESET. CC pins are set to default state after tErrorRecovery in PORT_RESET_WAIT_OFF. 4.5.2.2.2.2 Exiting From ErrorRecovery State A Sink shall transition to Unattached.SNK after tErrorRecovery. A Source shall transition to Unattached.SRC after tErrorRecovery. Fixes: 69f89168b310 ("usb: typec: tpcm: Fix issues with power being removed during reset") Cc: stable@vger.kernel.org Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Tested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240228000512.746252-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logicWayne Chang
[ Upstream commit 84fa943d93c31ee978355e6c6c69592dae3c9f59 ] This commit resolves an issue in the tegra-xudc USB gadget driver that incorrectly fetched USB3 PHY instances. The problem stemmed from the assumption of a one-to-one correspondence between USB2 and USB3 PHY names and their association with physical USB ports in the device tree. Previously, the driver associated USB3 PHY names directly with the USB3 instance number, leading to mismatches when mapping the physical USB ports. For instance, if using USB3-1 PHY, the driver expect the corresponding PHY name as 'usb3-1'. However, the physical USB ports in the device tree were designated as USB2-0 and USB3-0 as we only have one device controller, causing a misalignment. This commit rectifies the issue by adjusting the PHY naming logic. Now, the driver correctly correlates the USB2 and USB3 PHY instances, allowing the USB2-0 and USB3-1 PHYs to form a physical USB port pair while accurately reflecting their configuration in the device tree by naming them USB2-0 and USB3-0, respectively. The change ensures that the PHY and PHY names align appropriately, resolving the mismatch between physical USB ports and their associated names in the device tree. Fixes: b4e19931c98a ("usb: gadget: tegra-xudc: Support multiple device modes") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20240307030328.1487748-3-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03usb: dwc3-am62: Disable wakeup at removeRoger Quadros
[ Upstream commit 4ead695e6b3cac06543d7bc7241ab75aee4ea6a6 ] Disable wakeup at remove. Fixes the below warnings on module unload and reload. > dwc3-am62 f900000.dwc3-usb: couldn't enable device as a wakeup source: -17 > dwc3-am62 f910000.dwc3-usb: couldn't enable device as a wakeup source: -17 Fixes: 4e3972b589da ("usb: dwc3-am62: Enable as a wakeup source by default") Cc: stable@vger.kernel.org # v6.4+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-2-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03usb: dwc3-am62: fix module unload/reload behaviorRoger Quadros
[ Upstream commit 6661befe41009c210efa2c1bcd16a5cc4cff8a06 ] As runtime PM is enabled, the module can be runtime suspended when .remove() is called. Do a pm_runtime_get_sync() to make sure module is active before doing any register operations. Doing a pm_runtime_put_sync() should disable the refclk so no need to disable it again. Fixes the below warning at module removel. [ 39.705310] ------------[ cut here ]------------ [ 39.710004] clk:162:3 already disabled [ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8 We called of_platform_populate() in .probe() so call the cleanup function of_platform_depopulate() in .remove(). Get rid of the now unnnecessary dwc3_ti_remove_core(). Without this, module re-load doesn't work properly. Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-1-0ada8ddb0767@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03usb: typec: ucsi: Clean up UCSI_CABLE_PROP macrosJameson Thies
[ Upstream commit 4d0a5a9915793377c0fe1a8d78de6bcd92cea963 ] Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for plug type and updating the modal support macro for consistent naming. Fixes: 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields") Cc: stable@vger.kernel.org Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jameson Thies <jthies@google.com> Link: https://lore.kernel.org/r/20240305025804.1290919-2-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113MToru Katagiri
[ Upstream commit b1a8da9ff1395c4879b4bd41e55733d944f3d613 ] TDK NC0110013M and MM0110113M have custom USB IDs for CP210x, so we need to add them to the driver. Signed-off-by: Toru Katagiri <Toru.Katagiri@tdk.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03USB: serial: option: add MeiG Smart SLM320 productAurélien Jacobs
[ Upstream commit 46809c51565b83881aede6cdf3b0d25254966a41 ] Update the USB serial option driver to support MeiG Smart SLM320. ID 2dee:4d41 UNISOC UNISOC-8910 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d41 Rev=00.00 S: Manufacturer=UNISOC S: Product=UNISOC-8910 C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested successfully a PPP LTE connection using If#= 0. Not sure of the purpose of every other serial interfaces. Signed-off-by: Aurélien Jacobs <aurel@gnuage.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03USB: serial: cp210x: add ID for MGP Instruments PDS100Christian Häggström
[ Upstream commit a0d9d868491a362d421521499d98308c8e3a0398 ] The radiation meter has the text MGP Instruments PDS-100G or PDS-100GN produced by Mirion Technologies. Tested by forcing the driver association with echo 10c4 863c > /sys/bus/usb-serial/drivers/cp210x/new_id and then setting the serial port in 115200 8N1 mode. The device announces ID_USB_VENDOR_ENC=Silicon\x20Labs and ID_USB_MODEL_ENC=PDS100 Signed-off-by: Christian Häggström <christian.haggstrom@orexplore.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03USB: serial: add device ID for VeriFone adapterCameron Williams
[ Upstream commit cda704809797a8a86284f9df3eef5e62ec8a3175 ] Add device ID for a (probably fake) CP2102 UART device. lsusb -v output: Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x11ca VeriFone Inc idProduct 0x0212 Verifone USB to Printer bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Verifone USB to Printer iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 iInterface 2 Verifone USB to Printer Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USBDaniel Vogelbacher
[ Upstream commit 3fb7bc4f3a98c48981318b87cf553c5f115fd5ca ] The GMC IR-USB adapter cable utilizes a FTDI FT232R chip. Add VID/PID for this adapter so it can be used as serial device via ftdi_sio. Signed-off-by: Daniel Vogelbacher <daniel@chaospixel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03usb: xhci: Add error handling in xhci_map_urb_for_dmaPrashanth K
[ Upstream commit be95cc6d71dfd0cba66e3621c65413321b398052 ] Currently xhci_map_urb_for_dma() creates a temporary buffer and copies the SG list to the new linear buffer. But if the kzalloc_node() fails, then the following sg_pcopy_to_buffer() can lead to crash since it tries to memcpy to NULL pointer. So return -ENOMEM if kzalloc returns null pointer. Cc: stable@vger.kernel.org # 5.11 Fixes: 2017a1e58472 ("usb: xhci: Use temporary buffer to consolidate SG") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240229141438.619372-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26usb: gadget: net2272: Use irqflags in the call to net2272_probe_finColin Ian King
[ Upstream commit 600556809f04eb3bbccd05218215dcd7b285a9a9 ] Currently the variable irqflags is being set but is not being used, it appears it should be used in the call to net2272_probe_fin rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König for suggesting the fix. Cleans up clang scan build warning: drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags' set but not used [-Wunused-but-set-variable] Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26usb: phy: generic: Get the vbus supplySean Anderson
[ Upstream commit 75fd6485cccef269ac9eb3b71cf56753341195ef ] While support for working with a vbus was added, the regulator was never actually gotten (despite what was documented). Fix this by actually getting the supply from the device tree. Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20240123225111.1629405-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01usb: roles: don't get/set_role() when usb_role_switch is unregisteredXu Yang
commit b787a3e781759026a6212736ef8e52cf83d1821a upstream. There is a possibility that usb_role_switch device is unregistered before the user put usb_role_switch. In this case, the user may still want to get/set_role() since the user can't sense the changes of usb_role_switch. This will add a flag to show if usb_role_switch is already registered and avoid unwanted behaviors. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 10:36:57 +0000