summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
AgeCommit message (Collapse)Author
2009-06-15USB: serial: ftd_sio: implement sysrq handling on breakJason Wessel
Change driver to make use of the new functions in include/linux/usb/serial.h so as to allow the driver to handle the sysrq Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: serial: ftd_sio usb: move status checkJason Wessel
Alan Stern commented that the private driver counts must be updated regard less of the status return on the urb when the write call back is executed. This patch alters the behavior to update the private driver counts by simply moving the status check to after the driver count update. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: ftdi_sio: fix hi-speed device packet size calculationMark Adamson
Added a function to set the packet size to be used based on the value from the device endpoint descriptor. The FT2232H and FT4232H hi-speed devices will have wMaxPacketSize of 512 bytes when connected to a USB 2.0 hi-speed host, but will use alternative descriptors with wMaxPacketSize of 64 bytes if connected to a USB 1.1 host or hub. All other FTDI devices have wMaxPacketSize of 64 bytes, except some FT232R and FT245R devices which customers have mistakenly programmed to have wMaxPacketSize of 0 - this is an error and will be overridden to use wMaxPacketSize of 64 bytes. The packet size used is important as it determines where the driver removes the status bytes from the incoming data. If it is incorrect, it will lead to data corruption. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: serial: FTDI: add high speed device supportMark Adamson
Added support for FTDI's USB 2.0 hi-speed devices - FT2232H (2 interfaces) and FT4232H (4 interfaces), including a new baud rate calculation for these devices which can now achieve up to 12Mbaud by turning off a divide by 2.5 in the baud rate generator of the chips. In order to achieve baud rates of <1200 baud, the divide by 2.5 must be active. The default product ID of the FT2232H is 0x6010 (same as the FT2232C IC). The default PID of the FT4232H is 0x6011. Signed-off-by: Mark J. Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: FTDI-SIO new device idsDaniel Suchy
I would like to have added new device to usbserial/ftdi_sio driver. These ids used USB track device (http://www.l-and-b.dk/access_alt.html). They use differend device IDs, but it works as standard usb-serial conventer. From: Daniel Suchy <danny@danysek.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-11ftdi_sio: don't override modem bitsAlan Cox
The new open/close logic handles DTR and friends, so don't do it in our own open routine as well. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11ft232: support the ASYNC_LOW_LATENCY flagAlan Cox
This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox <alan@linux.intel.com) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Bring the usb tty port structure into more useAlan Cox
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-18Fix oops on close of hot-unplugged FTDI serial converterDavid Woodhouse
Commit c45d6320 ("fix reference counting of ftdi_private") stopped ftdi_sio_port_remove() from directly freeing the port-private data, with the intention if the port was still open, it would be freed when ftdi_close() is eventually called and releases the last refcount on the structure. That's all very well, but ftdi_sio_port_remove() still contains a call to usb_set_serial_port_data(port, NULL) -- so by the time we get to ftdi_close() for the port which was unplugged, it _still_ oopses on dereferencing that NULL pointer, as it did before (and does in 2.6.29). The fix is just not to clear the private data in ftdi_sio_port_remove(). Then the refcount is properly reduced to zero when the final kref_put() happens in ftdi_close(). Remove a bogus comment too, while we're at it. And stop doing things inside "if (priv)" -- it must _always_ be there. Based loosely on an earlier patch by Daniel Mack, and suggestions by Alan Stern. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-08usb-serial: ftdi_sio: fix reference counting of ftdi_privateAlan Stern
This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlugNicolas Pitre
For reference: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometerPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make actual_length in struct urb field u32Greg Kroah-Hartman
actual_length should also be a u32 and not a signed value. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: ftdi_sio: remove pointless syslog spewDavid Brownell
Remove some pointless messages from the FTDI serial driver; I found these filling up syslog on one system. Also remove a pointless "break" after a "return" in the same area. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: Remove redundant test in pxa27x_udc and ftdi_sioJulia Lawall
priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist ↵Michael Hennerich
interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: add FTDI USB/Serial converter devicesAxel Wachtler
Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: unlock_kernel() on error in set_serial_info()Dan Carpenter
There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: add support for the NDI Polaris systemStephane Clerambault
Add support for the NDI Polaris system *http://www.ndigital.com/). Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: ftdi_sio driver support of bar code scanner from DieboldMhayk Whandson
Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson <eu@mhayk.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: ftdi_sio: added Alti-2 VID and Neptune 3 PIDRobie Basak
This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-15ftdi_sio: fix kref leakJim Paris
Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to ftdi_sio, but missed tty_kref_put at one exit point in ftdi_process_read. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Drop the lock_kernel in the private ioctl hookAlan Cox
We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-17USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert
The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: tty: SprogII DCC controller identifiersAlan Cox
Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-05Fix incorrect use of loose in tty/serial driversNick Andrew
[Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-17USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman
err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/serial driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: ftdi_sio: fix 'product' parameter descriptionPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Add Oceanic product ID to ftdi_sioVladimir Vukicevic
Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13tty: usb-serial krefsAlan Cox
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13ftdi: A few errors are err() that should be debug which causes much spewageAlan Cox
Fixes #10783 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-23usb: ftdi_sio: add support for Domintell devicesGaetan Carlier
Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)Jaroslav Kysela
USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID ↵Lex Ross
0403:e40b) Support for PHI Fisco USB to Serial data cable (FTDI FT232BM based). PHI Fisco cable is supplied for connecting Philips Xenium 9@9++ mobile phones. PIDs were missing. Tested successfully with PHI Fisco Data Cable (VID/PID 0403:e40b) Signed-off-by: Lex V. Ross <lross@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: ftdi_sio: add support for Luminance Stellaris Evaluation/Development KitsFrederik Kriewitz
The Patch adds support for Luminance Stellaris Evaluation/Development Kits (FTDI 2232C based). The PIDs were missing. Successfully tested with a Stellaris LM3S8962 Evaluation kit. Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: ftdi_sio: Add USB Product Id for ELV HS485André Schenk
USB product id registration for the ELV HS485 USB adapter (www.elv.de) to their home automation bus system. Applies to 2.6.26. Signed-off-by: Andre Schenk <andre@melior.s.bawue.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22ftdi_sio: Coding styleAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22usb_serial: API all changeAlan Cox
USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-03USB: New device ID for ftdi_sio driverJon K Hellan
Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-29USB: FTDI_SIO : Add support for Matrix Orbital PID RangeRay Molenkamp
This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp <rmolenkamp@matrixorbital.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20usb-serial: Use ftdi_sio driver for RATOC REX-USB60FAtsushi Nemoto
This patch reverts 57833ea6b95a3995149f1f6d1a8d8862ab7a0ba2 ("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds support for the device to ftdi_sio driver. Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Cc: stable <stable@kernel.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add more FTDI device idsPeter Mack
Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-28drivers/usb annotations and fixesAl Viro
* endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: remove unnecessary type casting of urb->contextMing Lei
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: serial: remove unneeded number endpoints settingsGreg Kroah-Hartman
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: ftdi_sio: Note missing lockingAlan Cox
The ftdi_sio driver has no internal locking on the dtr/rts state. Flag that up for someone to fix. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: new ftdi_sio device idMirko Bordignon
Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 23:41:32 +0000