summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/jz4740.c
AgeCommit message (Collapse)Author
2020-05-25usb: musb: jz4740: Prevent lockup when CONFIG_SMP is setPaul Cercueil
The function dma_controller_irq() locks up the exact same spinlock we locked before calling it, which obviously resulted in a deadlock when CONFIG_SMP was enabled. This flew under the radar as none of the boards supported by this driver needs SMP. Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200525025049.3400-6-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Add support for the JZ4770Paul Cercueil
Add support for probing the jz4740-musb driver on the JZ4770 SoC. The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740, but it features more endpoints, and officially supports OTG. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Unconditionally depend on devicetreePaul Cercueil
The jz4740-musb driver is unconditionally probed from devicetree, so we can add a hard dependency on devicetree. This makes the code a bit cleaner, and is more future-proof as the platform data is now retrieved using of_device_get_match_data(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-6-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Register USB role switchPaul Cercueil
Register a USB role switch, in order to get notified by the connector driver when the USB role changes. The notification is then transmitted to the PHY. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-5-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: musb: jz4740: Add support for DMAPaul Cercueil
Add support for using the DMA channels built into the Inventra IP. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-4-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Whitespace and indentation fixesPaul Cercueil
Fix lines with too much or not enough indentation, and lines which were indented with spaces instead of tabs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-17-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Comments fixPaul Cercueil
Add a /* sentinel */ comment to the sentinel entry of the devicetree ID table, and fix a multi-line comment not having its opening token on a separate line. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-16-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Rename platform_device field in priv structPaul Cercueil
Name the platform_device pointer 'pdev' instead of 'musb'. Since the driver also deal with pointers to 'struct musb', it can be very confusing to have a pointer named after this struct but with a different type. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-15-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Constify jz4740_musb_pdata structPaul Cercueil
By moving around the jz4740_musb_pdata structure, we can have the .platform_ops field initialized, so that we don't have to initialize it manually in the probe function. Therefore, the struct can be const now. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-14-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Add local dev variable to clean up probePaul Cercueil
Clean up the probe function by using a local 'struct device *dev' variable, instead of referencing &pdev->dev everytime. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-13-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: jz4740: Suppress useless field in priv structurePaul Cercueil
The 'dev' field was never read anywhere. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-12-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: musb: jz4740: Silence error if code is -EPROBE_DEFERPaul Cercueil
Avoid printing any error message if the error code is -EPROBE_DEFER. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: jz4740: obtain USB PHY from devicetreePaul Cercueil
Fall back to devm_usb_get_phy() if devicetree is not available. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: jz4740: Let the platform probe the PHYPaul Cercueil
By registering a generic USB PHY from within the driver, we may shadow the USB PHY registered by the platform, which might be different. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: musb: jz4740: Add support for devicetreePaul Cercueil
Add support for probing the driver from devicetree. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: musb: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: musb: constify musb_hdrc_config structuresBhumika Goyal
Declare musb_hdrc_config structures as const as they are only stored in the config field of a musb_hdrc_platform_data structure. This field is of type const, so musb_hdrc_config structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct musb_hdrc_config x@p={...}; @ok@ struct musb_hdrc_platform_data pdata; identifier r.x; position p; @@ pdata.config=&x@p; @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct musb_hdrc_config x; File size before: text data bss dec hex filename 1212 338 0 1550 60e drivers/usb/musb/jz4740.o File size after: text data bss dec hex filename 1268 290 0 1558 616 drivers/usb/musb/jz4740.o File size before: text data bss dec hex filename 6151 333 16 6500 1964 drivers/usb/musb/sunxi.o File size after: text data bss dec hex filename 6215 269 16 6500 1964 drivers/usb/musb/sunxi.o File size before: text data bss dec hex filename 3668 864 0 4532 11b4 drivers/usb/musb/ux500.o File size after: text data bss dec hex filename 3724 808 0 4532 11b4 drivers/usb/musb/ux500.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: musb: jz4740: fix error check of usb_get_phy()Vladimir Zapolskiy
The usb_get_phy() function returns either a valid pointer to phy or ERR_PTR() error, check for NULL always fails and may lead to oops on error path, fix this issue. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-07usb: musb: Set up function pointers for DMATony Lindgren
Set up function pointers for DMA so get closer to being able to build in all the DMA engines. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: musb: Fix up DMA related macrosTony Lindgren
Pass struct musb to tusb_dma_omap() and is_cppi_enabled(), and add macros for the other DMA controllers. Populate the platform specific quirks with the DMA type and use it during runtime. Note that platform glue layers with no custom DMA code are tagged with MUSB_DMA_INVENTRA which may have a chance of working. Looks like the defconfigs for these use PIO_ONLY, so this should not break existing configs. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25usb: musb: Pass fifo_mode in platform dataTony Lindgren
This allows setting the correct fifo_mode when multiple MUSB glue layers are built-in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25usb: musb: Change end point selection to use new IO accessTony Lindgren
This allows the endpoints to work when multiple MUSB glue layers are built in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10usb: musb: register nop transceiver driver for jz4740Apelete Seketeli
Following the name change of the NOP transceiver driver in commit 4525bee (usb: phy: rename usb_nop_xceiv to usb_phy_generic), the transceiver driver was no longer operable under its old name. Register the transceiver driver before calling usb_get_phy() to make sure we are noticed by an error message if it is not available. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-20usb: musb: add support for JZ4740 usb device controllerApelete Seketeli
Add support for Ingenic JZ4740 USB Device Controller through a specific musb glue layer. JZ4740 UDC not being OTG compatible and missing some hardware registers, this musb glue layer is written from scratch to be used in gadget mode only and take silicon design specifics into account. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:18:37 +0000