summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2021-03-10usb: xhci-mtk: use clear type instead of voidChunfeng Yun
Use struct usb_host_endpoint instead of void to declare the member @ep of mu3h_sch_ep_info struct. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/e9790eb4b959f9f843433fa5048c76772cc59061.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: remove unnecessary members of mu3h_sch_tt structChunfeng Yun
The members @usb_tt and @tt_port in mu3h_sch_tt struct are not used after initialization, so can be removed Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/9afecc2411895a3c76658df26ebca1c961a39fbb.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: add a function to get bandwidth boundaryChunfeng Yun
This is used to simplify unit test. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/805b3ba66c2f02a52de4440212519aaa58463039.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: add a function to (un)load bandwidth infoChunfeng Yun
Extract a function to load/unload bandwidth info, and remove a dummy check of TT offset. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/6fbc000756a4a4a7efbce651b785fee7561becb6.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: use @sch_tt to check whether need do TT scheduleChunfeng Yun
It's clearer to use @sch_tt to check whether need do TT schedule, no function is changed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/324a76782ccaf857a8f01f67aee435e8ec7d0e28.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: add only one extra CS for FS/LS INTRChunfeng Yun
In USB2 Spec: "11.18.5 TT Response Generation In general, there will be two (or more) complete-split transactions scheduled for a periodic endpoint. However, for interrupt endpoints, the maximum size of the full-/low-speed transaction guarantees that it can never require more than two complete-split transactions. Two complete-split transactions are only required when the transaction spans a microframe boundary." Due to the maxp is 64, and less then 188 (at most in one microframe), seems never span boundary, so use only one CS for FS/LS interrupt transfer, this will save some bandwidth. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/5b9ff09f53d23cf9e5c5437db4ffc18b798bf60c.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: get the microframe boundary for ESITChunfeng Yun
Tune the boundary for FS/LS ESIT due to CS: For ISOC out-ep, the controller starts transfer data after the first SS; for others, the data is already transferred before the last CS. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/49e5a269a47984f3126a70c3fb471b0c2874b8c2.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: improve bandwidth scheduling with TTChunfeng Yun
When the USB headset is plug into an external hub, sometimes can't set config due to not enough bandwidth, so need improve LS/FS INT/ISOC bandwidth scheduling with TT. Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yaqii Wu <yaqii.wu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/2f30e81400a59afef5f8231c98149169c7520519.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: remove or operator for setting schedule parametersChunfeng Yun
Side effect may happen if use or operator to set schedule parameters when the parameters are already set before. Set them directly due to other bits are reserved. Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: host: uhci: remove dentry pointer for debugfsGreg Kroah-Hartman
There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. And, no one noticed that a __maybe_unused dentry * in uhci_start() really was unused, so remove that as it's obviously not needed, and hasn't been for quite some time. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: host: sl811: remove dentry pointer for debugfsGreg Kroah-Hartman
There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: host: isp1362: remove dentry pointer for debugfsGreg Kroah-Hartman
There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: host: isp116x: remove dentry pointer for debugfsGreg Kroah-Hartman
There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. Cc: Olav Kongas <ok@artecdesign.ee> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-08Merge 5.11-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05xhci: ext-caps: Use software node API with the propertiesHeikki Krogerus
This replaces the platform_device_add_properties() call with the safer device_create_managed_software_node() that does exactly the same, but can also guarantee that the lifetime of the node that is created for the device is tied to the lifetime of device itself. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210204141711.53775-7-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03xhci: fix bounce buffer usage for non-sg list caseMathias Nyman
xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720Pali Rohár
Older ATF does not provide SMC call for USB 3.0 phy power on functionality and therefore initialization of xhci-hcd is failing when older version of ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP. [ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95 [ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95 This patch introduces a new plat_setup callback for xhci platform drivers which is called prior calling usb_add_hcd() function. This function at its beginning skips PHY init if hcd->skip_phy_initialization is set. Current init_quirk callback for xhci platform drivers is called from xhci_plat_setup() function which is called after chip reset completes. It happens in the middle of the usb_add_hcd() function and therefore this callback cannot be used for setting if PHY init should be skipped or not. For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup() function configured as a xhci platform plat_setup callback. This new function calls phy_power_on() and in case it returns -EOPNOTSUPP then XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY initialization. This patch fixes above failure by ignoring 'not supported' error in xhci-hcd driver. In this case it is expected that phy is already power on. It fixes initialization of xhci-hcd on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power. This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined and therefore xhci-hcd on Espressobin with older ATF started failing. Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Cc: <stable@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Cc: <stable@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # On R-Car Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # xhci-plat Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-02usb: xhci-mtk: break loop when find the endpoint to dropChunfeng Yun
No need to check the following endpoints after finding the endpoint wanted to drop. Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints") Cc: stable <stable@vger.kernel.org> Reported-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1612255104-5363-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-01ARM: 9048/1: sa1111: make sa1111 bus's remove callback return voidUwe Kleine-König
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sa1111_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01usb: xhci-mtk: skip dropping bandwidth of unchecked endpointsChunfeng Yun
For those unchecked endpoints, we don't allocate bandwidth for them, so no need free the bandwidth, otherwise will decrease the allocated bandwidth. Meanwhile use xhci_dbg() instead of dev_dbg() to print logs and rename bw_ep_list_new as bw_ep_chk_list. Fixes: 1d69f9d901ef ("usb: xhci-mtk: fix unreleased bandwidth data") Cc: stable <stable@vger.kernel.org> Reviewed-and-tested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1612159064-28413-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: handle halting transfer event properly after endpoint stop and halt raced.Mathias Nyman
If we receive a transfer event indicating that an endpoint should be halted, but current endpoint state doesn't match it, then the halt might be just resolved by the stop endpoint completion handler that detects the halted endpoint due to a context state error. In this case the TD we halted on is already moved to the cancelled TD list, and should not be successfully completed and given back anymore. Let the stop endpoint completion handler reset the endpoint, and then let the reset endpoint handler give back the cancelled TD among all other ones on the cancelled TD list Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-28-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Check for pending reset endpoint command before queueing a new one.Mathias Nyman
A halted endpoint can be detected both when transfer events complete, and in stop endpoint command completion. Both these handlers will start clearing up the halted endpoint and queue a reset endpoint command. It's possible to get both events for the same halted endpoint if right after a URB cancel queues a stop endpoint command the endpoint stalls. Use the EP_HALTED flag to prevent resetting the endpoint twice. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-27-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: remove obsolete dequeue pointer moving codeMathias Nyman
xhci_find_new_dequeue_state() and xhci_queue_new_dequeue_state() are no longer used afer introducing the move_dequeue_past_td() function. also remove struct xhci_dequeue_state as its no longer used. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-26-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: introduce a new move_dequeue_past_td() function to replace old code.Mathias Nyman
Replace xhci_find_new_dequeue_state() and xhci_queue_new_dequeue_state() functions with one combined function. These function were always called after each other, and had a lot of extra code just to pass the newly found dequeue state from the first function to the other. The new function also returns error in case there is a failure to queue the new dequeue state. This way the caller can decide on recovery measures to handle it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-25-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: handle stop endpoint command completion with endpoint in running state.Mathias Nyman
Handle race where a stop endpoint command fails with "context state error" as hardware hasn't actually started the ring yet after a previous urb cancellation completed and restarted the endpoint. Flushing the doorbell write that restart the endpoint reduced these cases, but didn't completely resolve them. Check if the ring is running in the stop endpoint completion handler, and issue a new stop endpoint command in this case. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-24-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Fix halted endpoint at stop endpoint command completionMathias Nyman
xhci 4.6.9: "A busy endpoint may asynchronously transition from the Running to the Halted or Error state due to error conditions detected while processing TRBs. A possible race condition may occur if software, thinking an endpoint is in the running state, issues a Stop Endpoint Command, however at the same time the xHC asynchronously transitions the endpoint to the Halted or Error state. In this case, a Context State Error may be generated for the command completion. Software may verify that this case occurred by inspecting the EP State for Halted or Error when a Stop Endpoint Command results in a Context State Error." Halted endpoints were not detected or handled at all in the stop endpoint completion handler. A set TR Deq ptr command was bluntly queued instead of resetting the endpoint first. The set TR Deq command would fail with a context state error. Fix this case by resetting the halted endpoint first to get it to a stopped state instead of the halted (error) state. Handle cancelled TDs once endpoint reset completes, invalidating cancelled TDs on ring either by turning them to no-op, or in case ring stopped on cancelled TD then move hardware dequeue pointer past it, which will clear the cancelled TD from hw cache, and make sure HW does not process it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-23-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: split handling halted endpoints into two stepsMathias Nyman
Don't queue both a reset endpoint command and a set TR deq command at once when handling a halted endpoint. split this into two steps. Initially only queue a reset endpoint command, and then if needed queue a set TR deq command in the reset endpoint handler. Note: This removes the RESET_EP_QUIRK handling which was added in commit ac9d8fe7c6a8 ("USB: xhci: Add quirk for Fresco Logic xHCI hardware.") This quirk was added in 2009 for prototype xHCI hardware meant for evaluation purposes only, and should not reach consumers. This hardware could not handle two commands queued at once, and had bad data in the output context after a reset endpoint command. After this patch two command are no longer queued at once, so that part is solved in this rewrite, but the workaround for bad data in the output context solved by issuing an extra configure endpoint command is bluntly removed. Adding this workaround to the new rewrite just adds complexity, and I think it's time to let this quirk go. Print a debug message instead. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-22-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: move and rename xhci_cleanup_halted_endpoint()Mathias Nyman
Halted endpoints can be discoverd both when handling transfer events and command completion events. Move code that handles halted endpoints before both of those event handlers. Rename the function to xhci_handle_halted_ep() to better describe what it does. Try to reserve "cleanup" word in function names for last stage cleanup activities. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-21-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: turn cancelled td cleanup to its own functionMathias Nyman
Refactor handler for stop endpoint command completion. Yank out the part that invalidates cancelled TDs and turn it into a separate function. Invalidating cancelled TDs should be done while the ring is stopped, but not exclusively in the stop endpoint command completeion handler. We will need to invalidate TDs after resetting endpoints as well. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-20-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: store TD status in the td struct instead of passing it alongMathias Nyman
In cases where the TD can't be given back in current handler we want to be able to store it until its time to return the TD. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-19-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: use xhci_td_cleanup() helper when giving back cancelled URBsMathias Nyman
use the existing xhci_td_cleanup() to give back cancelled TDs when a ring is stopped. A minor change to make sure we don't try to remove an already removed td from the list is needed as cancelled TDs are already removed from the td_list immediatelty when it's cancelled. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-18-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: move xhci_td_cleanup so it can be called by more functionsMathias Nyman
No funtional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Add xhci_reset_halted_ep() helper functionMathias Nyman
Create a separate helper function to issue reset endpont commands to clear halted endpoints. This is useful for cases where a halted endpoint is discovered while completing another command, and the endpoint halt needs to be cleared with a endpoint reset first. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-16-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: flush endpoint start to reduce race risk with stop endpoint command.Mathias Nyman
Stop endpoint command fails with "context state error" if the endpoint is already stopped. This case was observed when a previous URB cancel had just completed and rang the doorbell to restart the ring, when a new URB cancel queued a stop endpoint command. >From xHC hardware pov the endpoint had not yet started, so the stop endpoint command failed with context state error. Right after this the doorbell ring took effect and ring was restarted. Interrupt handler saw a stop endpoint command completion event with "context state error" and discovered that the ring was back up in running state. flushing the write reduces these cases in stress testing, but does not completely remove the issue. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Check link TRBs when updating ring enqueue and dequeue pointers.Mathias Nyman
xhci driver relies on link TRBs existing in the correct places in TRB ring buffers shared with the host controller. The controller should not modify these link TRBs, but in theory a faulty xHC could do it. Add some basic sanity checks to avoid infinite loops in interrupt handler, or accessing unallocated memory outside a ring segment due to missing or misplaced link TRBs. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-14-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: avoid DMA double fetch when reading event trb type.Mathias Nyman
Instead of re-reading, masking and endianness correcting the same trb several times to get the trb type from an event, just do it once and store it in a local variable. Also pass the trb_type directly to the vendor specific event handler, avoiding one more similar read. In addition to the security benefit this also cleans up the code and helps readability. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: remove extra loop in interrupt contextMathias Nyman
When finishing a TD we walk the endpoint dequeue trb pointer until it matches the last TRB of the TD. TDs can contain over 100 TRBs, meaning we call a function 100 times, do a few comparisons and increase a couple values for each of these calls, all in interrupt context. This can all be avoided by adding a pointer to the last TRB segment, and a number of TRBs in the TD. So instead of walking through each TRB just set the new dequeue segment, pointer, and number of free TRBs directly. Getting rid of the while loop also reduces the risk of getting stuck in a infinite loop in the interrupt handler. Loop relied on valid matching dequeue and last_trb values to break. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: check slot_id is valid before gathering slot infoLalithambika Krishna Kumar
Check that the slot_id that we dug out from command completion event TRB, is valid before using it to identify the slot associated with the command that generated the event. Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: prevent a theoretical endless loop while preparing rings.Mathias Nyman
xhci driver links together segments in a ring buffer by turning the last TRB of a segment into a link TRB, pointing to the beginning of the next segment. If the first TRB of every segment for some unknown reason is a link TRB pointing to the next segment, then prepare_ring() loops indefinitely. This isn't something the xhci driver would do. xHC hardware has access to these rings, it sholdn't be writing link TRBs either, but with broken xHC hardware this could in theory be possible. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: remove xhci_stream_id_to_ring() helperMathias Nyman
The one case that used this function can use the xhci_triad_to_transfer_ring() helper instead. Avoid having several functions doing basically the same thing. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: add xhci_virt_ep_to_ring() helperMathias Nyman
Two existing ring helpers, xhci_triad_to_transfer_ring() and xhci_stream_id_to_ring() have partially similar functionality. Both have some limitation, especieally with boundary checking. Add a new xhci_virt_ep_to_ring() helper with proper boundary checking that can replace parts of one helper, and later will completely replace the other helper. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: check virt_dev is valid before dereferencing itMathias Nyman
Check that the xhci_virt_dev structure that we dug out based on a slot_id value from a command completion is valid before dereferencing it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: add xhci_get_virt_ep() helperMathias Nyman
In several event handlers we need to find the right endpoint structure from slot_id and ep_index in the event. Add a helper for this, check that slot_id and ep_index are valid. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: remove unused event parameter from completion handlersMathias Nyman
several command completion handlers are passed the event trb as a paramtere even if it't not used. Remove it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: adjust parameters passed to cleanup_halted_endpoint()Mathias Nyman
Instead of passing slot id and endpoint index to cleanup_halted_endpoint() pass the endpoint structure pointer as it's already known. Avoids again digging out the endpoint structure based on slot id and endpoint index, and passing them along the call chain for this purpose only. Add slot_id to the virt_dev structure so that it can easily be found from a virt_dev, or its child, the virt_ep endpoint structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: get isochronous ring directly from endpoint structureMathias Nyman
isochronous endpoints do not support streams, meaning that there is only one ring per endpoint. Avoid double-fetching the transfer event DMA to get the ring. Also makes passing the event to skip_isoc_td() uncecessary. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29xhci: Avoid parsing transfer events several timesMathias Nyman
When handling transfer events the event is passed along the handling callpath and parsed again in several occasions. The event contains slot_id and endpoint index, from which the driver endpoint structure can be found. There wasn't however a way to get the endpoint index or parent usb device from this endpoint structure. A lot of extra event parsing, and thus some DMA doublefetch cases, and excess variables and code can be avoided by adding endpoint index and parent usb virt device pointer to the endpoint structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26usb: xhci-mtk: fix unreleased bandwidth dataIkjoon Jang
xhci-mtk needs XHCI_MTK_HOST quirk functions in add_endpoint() and drop_endpoint() to handle its own sw bandwidth management. It stores bandwidth data into an internal table every time add_endpoint() is called, and drops those in drop_endpoint(). But when bandwidth allocation fails at one endpoint, all earlier allocation from the same interface could still remain at the table. This patch moves bandwidth management codes to check_bandwidth() and reset_bandwidth() path. To do so, this patch also adds those functions to xhci_driver_overrides and lets mtk-xhci to release all failed endpoints in reset_bandwidth() path. Fixes: 08e469de87a2 ("usb: xhci-mtk: supports bandwidth scheduling with multi-TT") Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Link: https://lore.kernel.org/r/20210113180444.v6.1.Id0d31b5f3ddf5e734d2ab11161ac5821921b1e1e@changeid Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25Merge v5.11-rc5 into usb-nextGreg Kroah-Hartman
We need the fixes in here and this resolves a merge issue with drivers/usb/gadget/udc/bdc/Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 14:57:39 +0000