summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2022-02-17xhci: dbc: create and remove dbc structure in dbgtty driver.Mathias Nyman
Turn the dbgtty closer to a device driver by allocating the dbc structure in its own xhci_dbc_tty_probe() function, and freeing it in xhci_dbc_tty_remove() Remove xhci_do_dbc_exit() as its no longer needed. allocate and create the dbc strcuture in xhci_dbc_tty_probe() Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17xhci: dbc: refactor xhci_dbc_init()Mathias Nyman
Refactor xhci_dbc_init(), splitting it into logical parts closer to the Linux device model. - Create the fake dbc device, depends on xhci strucure - Allocate a dbc structure, xhci agnostic - Call xhci_dbc_tty_probe(), similar to actual probe. Adjustments to xhci_dbc_exit and xhci_dbc_remove are also needed as a result to the xhci_dbc_init() changes Mostly non-functional changes, except for creating the dbc sysfs entry earlier, together with the dbc structure. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220216095153.1303105-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: host: xhci-mtk: Simplify supplies handling with regulator_bulkAngeloGioacchino Del Regno
Remove the custom functions xhci_mtk_ldos_{enable,disable}() by switching to using regulator_bulk to perform the very same thing, as the regulators are always either both enabled or both disabled. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220214111905.77903-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie
The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15xhci: re-initialize the HC during resume if HCE was setPuma Hsu
When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu <pumahsu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: host: ehci-platform: Update brcm, xgs-iproc-ehci workaroundChris Packham
The original workaround was added prior to commit e4788edc730a ("USB: EHCI: Add alias for Broadcom INSNREG"). Now that brcm_insnreg exists in struct ehci_regs we can use that instead of having a local definition. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20220215000813.1779032-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-15usb: host: {e|o}hci-dbg: kill useless 'ret' variable initializersSergey Shtylyov
The 'ret' local variables are often initialized to 0 but this value is unused, thus we can kill those initializers... Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/901b7478-45b6-d8b3-f5c6-555712485232@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: xhci-mtk: add support ip-sleep wakeup for mt8195Chunfeng Yun
Add support ip-sleep wakeup for mt8195, it's a specific revision for each USB controller, and not following IPM rule. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220128062902.26273-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08usb: ehci: add pci device support for Aspeed platformsNeal Liu
Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31Merge tag 'v5.17-rc2' into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: xhci-mtk: Use struct_size() helper in create_sch_ep()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/host/xhci-mtk-sch.c:265:20: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/160 Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120015546.GA75917@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: host: fotg210: Use struct_size() helper in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/usb/host/fotg210-hcd.c:4017:20: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220120222043.GA33559@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: host: xhci-plat: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/178f859197bebb385609a7c9458fb972ed312e5d.1642233968.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: host: ehci-sched: Use struct_size() in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worse scenario, could lead to heap overflows. Also, address the following sparse warning: drivers/usb/host/ehci-sched.c:1168:40: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/160 Link: https://github.com/KSPP/linux/issues/174 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20220111075427.GA76390@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: xhci-plat: fix crash when suspend if remote wake enableFrank Li
Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456d0f06e ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Reviewed-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Testeb-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.cIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-03Merge 5.16-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: stable@vger.kernel.org cc: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21usb: host: fotg210: Use platform_get_irq() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211220010411.12075-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21xhci: use max() to make code cleanerChangcheng Deng
Use max() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Link: https://lore.kernel.org/r/20211215091602.445009-1-deng.changcheng@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21Revert "usb: host: ehci-sh: propagate errors from platform_get_irq()"Greg Kroah-Hartman
This reverts commit 1aebf115afd730d1e0f773b8273b04b8681e1128 as the prerequsite commit for it is not in the tree. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20Merge 5.16-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: host: ohci-omap: propagate errors from platform_get_irq()Sergey Shtylyov
The driver overrides the error codes returned by platform_get_irq() to -ENXIO for some strange reason. Switch to propagating the error codes upstream. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20211214204247.7172-5-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: host: ehci-sh: propagate errors from platform_get_irq()Sergey Shtylyov
The driver overrides the error codes and IRQ0 returned by platform_get_irq() to -ENODEV. Switch to propagating the error codes upstream. IRQ0 is no longer returned by platform_get_irq(), so we now can safely ignore it... Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20211214204247.7172-4-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: uhci: Use platform_get_irq() to get the interruptRob Herring
Accessing platform device resources directly has long been deprecated for DT as IRQ resources may not be available at device creation time. Drivers continuing to use static IRQ resources is blocking removing the static setup from the DT core code. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215225203.1991003-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: ohci-s3c2410: Use platform_get_irq() to get the interruptRob Herring
Accessing platform device resources directly has long been deprecated for DT as IRQ resources may not be available at device creation time. Drivers relying on the static IRQ resources is blocking removing the static setup from the DT core code. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215225358.1993774-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: ohci-spear: Remove direct access to platform_device resource listRob Herring
The memory resource is already retrieved with platform_get_resource(), so let's use it instead of assuming it is the first resource in the array. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215225509.1995417-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15usb: host: xen-hcd: add missing unlock in error pathYang Yingliang
Add the missing unlock before return from function xenhcd_urb_request_done() and xenhcd_conn_notify() in the error handling case. Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211215035805.375244-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah
AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: xhci-mtk: fix list_del warning when enable list debugChunfeng Yun
There is warning of 'list_del corruption' when enable list debug (CONFIG_DEBUG_LIST=y), fix it by using list_del_init() Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211209025422.17108-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: Introduce Xen pvUSB frontend (xen hcd)Juergen Gross
Introduces the Xen pvUSB frontend. With pvUSB it is possible for a Xen domU to communicate with a USB device assigned to that domU. The communication is all done via the pvUSB backend in a driver domain (usually Dom0) which is owner of the physical device. The pvUSB frontend is a USB hcd for a virtual USB host connector. The code is taken from the pvUSB implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - move module to appropriate location in kernel tree - adapt to Linux style guide - minor code modifications to increase readability Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211123132048.5335-3-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13Merge 5.16-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-10xhci: avoid race between disable slot command and host runtime suspendMathias Nyman
Make xhci_disable_slot() synchronous, thus ensuring it, and xhci_free_dev() calling it return after xHC controller completes the disable slot command. Otherwise the roothub and xHC host may runtime suspend, and clear the command ring while the disable slot command is being processed. This causes a command completion mismatch as the completion event can't be mapped to the correct command. Command ring gets out of sync and commands time out. Driver finally assumes host is unresponsive and bails out. usb 2-4: USB disconnect, device number 10 xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event ... xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:0d.0: HC died; cleaning up Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-10xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspendingKai-Heng Feng
When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-06Merge 5.16-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman
Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03usb: uhci: add aspeed ast2600 uhci supportNeal Liu
Enable ast2600 uhci quirks. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-29Merge 5.16-rc3 into usb-nextGreg Kroah-Hartman
We need the USB driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: xhci: tegra: Check padctrl interrupt presence in device treeDmitry Osipenko
Older device-trees don't specify padctrl interrupt and xhci-tegra driver now fails to probe with -EINVAL using those device-trees. Check interrupt presence and keep runtime PM disabled if it's missing to fix the trouble. Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Cc: <stable@vger.kernel.org> # 5.14+ Reported-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> # T124 TK1 Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thierry Reding <treding@nvidia.com> # Tegra CI Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211107224455.10359-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: xhci-mtk: fix random remote wakeupChunfeng Yun
Some platforms, e.g. 8183/8192, use low level latch way to keep wakeup signal, it may latch a wrong signal if debounce more time, and enable wakeup function earlier. ____________________ ip_sleep ____/ \_____________ ___________________ wakeup_signal ____________/ \______ _______________________________ wakeup_en _______/ ^ ^ |(1) |(2) latch wakeup_signal mistakenly at (1), should latch it at (2); Workaround: delay about 100us to enable wakeup, meanwhile decrease debounce time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211102025004.29156-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: xhci-mtk: remove unnecessary error checkChunfeng Yun
No need check the return value, just return it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211102025004.29156-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Acked-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Peter Chen <peter.chen@kernel.or> # for chipidea part Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17USB: ehci_brcm_hub_control: Improve port index sanitizingHaimin Zhang
Due to (wIndex & 0xff) - 1 can get an integer greater than 15, this can cause array index to be out of bounds since the size of array port_status is 15. This change prevents a possible out-of-bounds pointer computation by forcing the use of a valid port number. Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20211113165320.GA59686@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-11Merge tag 'usb-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small reverts and fixes for USB drivers for issues that came up during the 5.16-rc1 merge window. These include: - two reverts of xhci and USB core patches that are causing problems in many systems. - xhci 3.1 enumeration delay fix for systems that were having problems. All three of these have been in linux-next all week with no reported issues" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay Revert "usb: core: hcd: Add support for deferring roothub registration" Revert "xhci: Set HCD flag to defer primary roothub registration"
2021-11-06Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-06xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delayMathias Nyman
Some USB 3.1 enumeration issues were reported after the hub driver removed the minimum 100ms limit for the power-on-good delay. Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") the hub driver sets the power-on-delay based on the bPwrOn2PwrGood value in the hub descriptor. xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based on xhci spec section 5.4.8, but it's clearly not enough for the USB 3.1 devices, causing enumeration issues. Tests indicate full 100ms delay is needed. Reported-by: Walt Jr. Brake <mr.yming81@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05Revert "xhci: Set HCD flag to defer primary roothub registration"Greg Kroah-Hartman
This reverts commit b7a0a792f864583207c593b50fd1b752ed89f4c1. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-04Merge tag 'usb-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1. Nothing major in here, just lots of little cleanups and additions for new hardware, all of which have been in linux-next for a while with no reported problems. Included in here are: - tiny Thunderbolt driver updates - USB typec driver updates - USB serial driver updates - USB gadget driver updates - dwc2 and dwc3 controller driver updates - tiny USB host driver updates - minor USB driver fixes and updates - USB dts updates for various platforms" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits) usb: gadget: Mark USB_FSL_QE broken on 64-bit usb: gadget: f_mass_storage: Disable eps during disconnect usb: gadget: udc: core: Revise comments for USB ep enable/disable USB: serial: keyspan: fix memleak on probe errors USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() USB: serial: ch314: use usb_control_msg_recv() USB: iowarrior: fix control-message timeouts Documentation: USB: fix example bulk-message timeout usb: dwc2: stm32mp15: set otg_rev usb: dwc2: add otg_rev and otg_caps information for gadget driver dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml dt-bindings: usb: dwc2: Add reference to usb-drd.yaml usb: gadget: uvc: implement dwPresentationTime and scrSourceClock usb: gadget: uvc: use on returned header len in video_encode_isoc_sg usb:gadget: f_uac1: fixed sync playback Docs: usb: remove :c:func: for usb_register and usb_deregister Docs: usb: update struct usb_driver usb: gadget: configfs: change config attributes file operation usb: gadget: configfs: add cfg_to_gadget_info() helper usb: dwc3: Align DWC3_EP_* flag macros ...
2021-11-02Merge branch 'pm-sleep'Rafael J. Wysocki
Merge updates related to system sleep for 5.16-rc1: - Clean up hib_wait_io() (Falla Coulibaly). - Fix sparse warnings in hibernation-related code (Anders Roxell). - Use vzalloc() and kzalloc() instead of their open-coded equivalents in hibernation-related code (Cai Huoqing). - Prevent user space from crashing the kernel by attempting to restore the system state from a swap partition in use (Ye Bin). - Do not let "syscore" devices runtime-suspend during system PM transitions (Rafael Wysocki). - Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki). - Pause cpuidle later and resume it earlier during system PM transitions (Rafael Wysocki). - Make system suspend code use valid_state() consistently (Rafael Wysocki). - Add support for enabling wakeup IRQs after invoking the ->runtime_suspend() callback and make two drivers use it (Chunfeng Yun). * pm-sleep: usb: mtu3: enable wake-up interrupt after runtime_suspend called usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called PM / wakeirq: support enabling wake-up irq after runtime_suspend called PM: suspend: Use valid_state() consistently PM: sleep: Pause cpuidle later and resume it earlier during system transitions PM: suspend: Do not pause cpuidle in the suspend-to-idle path PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions PM: hibernate: Get block device exclusively in swsusp_check() PM: hibernate: swap: Use vzalloc() and kzalloc() PM: hibernate: fix sparse warnings Revert "PM: sleep: Do not assume that "mem" is always present" PM: hibernate: Remove blk_status_to_errno in hib_wait_io PM: sleep: Do not assume that "mem" is always present
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:42:56 +0000