summaryrefslogtreecommitdiff
path: root/drivers/ufs/host
AgeCommit message (Collapse)Author
2024-01-23scsi: ufs: ufs-mediatek: Change default autosuspend timerPeter Wang
Change default autosuspend timer from 2000 ms to 500 ms for the MediaTek driver. Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20240109124015.31359-3-peter.wang@mediatek.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23scsi: ufs: ufs-mediatek: Disable MCQ IRQ when clock offPeter Wang
Disable MCQ IRQ when clock is off. This is same as legacy mode. Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20231221110416.16176-4-peter.wang@mediatek.com Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23scsi: ufs: ufs-mediatek: Fix MCQ mode TM cmd timeoutPeter Wang
Fix TM cmd timeout issue in MCQ mode using the default resume call ufshcd_make_hba_operational() to set TM cmd DMA address. This flow is the same as UFS initialization after link startup and then setting MCQ related registers if using MCQ mode. Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20231221110416.16176-3-peter.wang@mediatek.com Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23scsi: ufs: ufs-mediatek: Check link status after exiting hibern8Peter Wang
To prevent SSU(Active) error, check link status after exiting hibern8. If link is not VS_LINK_UP, return error and do ufshcd_link_recovery. Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20231221110416.16176-2-peter.wang@mediatek.com Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23scsi: ufs: ufs-mediatek: Migrate to UFSHCD generic CPU latency PM QoS supportMaramaina Naresh
The PM QoS feature found in the MediaTek UFS driver was moved to the UFSHCD core. Hence remove it from MediaTek UFS driver as it is redundant now. Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com> Link: https://lore.kernel.org/r/20231219123706.6463-3-quic_mnaresh@quicinc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-20Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Final round of fixes that came in too late to send in the first request. It's nine bug fixes and one version update (because of a bug fix) and one set of PCI ID additions. There's one bug fix in the core which is really a one liner (except that an additional sdev pointer was added for convenience) and the rest are in drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: core: Add TMF to tmr_list handling scsi: core: Kick the requeue list after inserting when flushing scsi: fnic: unlock on error path in fnic_queuecommand() scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode() scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings scsi: smartpqi: Bump driver version to 2.1.26-030 scsi: smartpqi: Fix logical volume rescan race condition scsi: smartpqi: Add new controller PCI IDs scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi() scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan() scsi: ufs: core: Simplify power management during async scan
2024-01-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic, hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates. This time around there's only a single line update to the core, so nothing major and barely anything minor" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits) scsi: ufs: core: Simplify ufshcd_auto_hibern8_update() scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static scsi: ufs: qcom: Fix ESI vector mask scsi: ufs: host: Fix kernel-doc warning scsi: hisi_sas: Correct the number of global debugfs registers scsi: hisi_sas: Rollback some operations if FLR failed scsi: hisi_sas: Check before using pointer variables scsi: hisi_sas: Replace with standard error code return value scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM scsi: ufs: core: Add sysfs node for UFS RTC update scsi: ufs: core: Add UFS RTC support scsi: ufs: core: Add ufshcd_is_ufs_dev_busy() scsi: ufs: qcom: Remove unused definitions scsi: ufs: qcom: Use ufshcd_rmwl() where applicable scsi: ufs: qcom: Remove support for host controllers older than v2.0 scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl() scsi: ufs: qcom: Sort includes alphabetically scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional() ...
2024-01-03scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()ChanWoo Lee
There is only one place where goto is used, and it is unnecessary to check the ret value through 'goto out' because the ret value is already true. Therefore, remove the goto statement and integrate the '!ret' condition into the existing code. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20231219082740.27644-1-cw9316.lee@samsung.com Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-18scsi: ufs: qcom: Return ufs_qcom_clk_scale_*() errors in ↵ChanWoo Lee
ufs_qcom_clk_scale_notify() In commit 031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements") the error handling was accidentally changed, resulting in the error of ufs_qcom_clk_scale_*() calls not being returned. This is the case I checked: ufs_qcom_clk_scale_notify -> 'ufs_qcom_clk_scale_up_/down_pre_change' error -> return 0; Make sure those errors are properly returned. Fixes: 031312dbc695 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20231215003812.29650-1-cw9316.lee@samsung.com Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-18scsi: ufs: qcom: Fix ESI vector maskManivannan Sadhasivam
While cleaning up the code to use ufshcd_rmwl() helper, the ESI vector mask was changed incorrectly. Fix it and also define a proper macro for the value together with FIELD_PREP(). Reported-by: Andrew Halaney <ahalaney@redhat.com> Fixes: 0e9f4375db1c ("scsi: ufs: qcom: Use ufshcd_rmwl() where applicable") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231214125532.55109-1-manivannan.sadhasivam@linaro.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-18scsi: ufs: host: Fix kernel-doc warningMartin K. Petersen
Commit fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params") inadvertently introduced a comment line without '*' prefix. Format the comment section correctly. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312171915.YhlTLvLL-lkp@intel.com/ Fixes: fa3dca8251c4 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13Merge patch series "scsi: ufs: qcom: Code cleanups"Martin K. Petersen
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says: Hello, This series has code some cleanups to the Qcom UFS driver. No functional change. In this version, I've removed code supporting legacy controllers ver < 2.0, as the respective platforms were never supported in upstream. Tested on: RB5 development board based on Qcom SM8250 SoC. Link: https://lore.kernel.org/r/20231208065902.11006-1-manivannan.sadhasivam@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove unused definitionsManivannan Sadhasivam
Remove unused definitions. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-18-manivannan.sadhasivam@linaro.org Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Use ufshcd_rmwl() where applicableManivannan Sadhasivam
Instead of using both ufshcd_readl() and ufshcd_writel() to read/modify/ write a register, let's make use of the existing helper. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-17-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove support for host controllers older than v2.0Manivannan Sadhasivam
The legacy platforms making use of host controllers older than version 2.0 are not supported in upstream. So there is no need to carry code to support them. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-16-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_resetManivannan Sadhasivam
In both the functions, UFS_PHY_SOFT_RESET contains the mask of the reset bit. So this can be passed directly as the value to be written for asserting the reset. For deasserting, 0 can be passed. This gets rid of the FIELD_PREP() inside these functions and also UFS_PHY_RESET_{ENABLE/DISABLE} definitions. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-15-manivannan.sadhasivam@linaro.org Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Initialize cycles_in_1us variable in ↵Manivannan Sadhasivam
ufs_qcom_set_core_clk_ctrl() In case the "core_clk_unipro" clock is not provided, "cycles_in_1us" variable will be used as uninitialized. So initialize it with 0. Issue reported by Smatch tool: drivers/ufs/host/ufs-qcom.c:1336 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'. drivers/ufs/host/ufs-qcom.c:1341 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-14-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Sort includes alphabeticallyManivannan Sadhasivam
Sort includes alphabetically. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-13-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct arrayManivannan Sadhasivam
ufs_qcom_hosts array is assigned, but not used anywhere. So let's remove it. Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-12-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of ↵Manivannan Sadhasivam
devm_gpiod_get_optional() As done in other places, let's use dev_err_probe() to simplify the error handling while acquiring the device reset gpio using devm_gpiod_get_optional(). While at it, let's reword the error message to make it clear that the failure is due to acquiring "device reset gpio". Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-11-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove redundant error print for devm_kzalloc() failureManivannan Sadhasivam
devm_kzalloc() will itself print the error message on failure. So let's get rid of the redundant error message in ufs_qcom_init(). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-10-manivannan.sadhasivam@linaro.org Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Check the return value of ufs_qcom_power_up_sequence()Manivannan Sadhasivam
If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable the lane clocks and continue ufshcd_hba_enable(). So let's check the return value of ufs_qcom_power_up_sequence(). Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-9-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Fail ufs_qcom_power_up_sequence() when core_reset failsManivannan Sadhasivam
Even though core_reset is optional, a failure during assert/deassert should be considered fatal, if core_reset is available. So fail ufs_qcom_power_up_sequence() if an error happens during reset and also get rid of the redundant warning as the ufs_qcom_host_reset() function itself prints error messages. Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-8-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Export ufshcd_{enable/disable}_irq helpers and make use of themManivannan Sadhasivam
Instead of duplicating the enable/disable IRQ part, let's export the helpers available in ufshcd driver and make use of them. This also fixes the possible redundant IRQ disable before asserting reset (when IRQ was already disabled). Fixes: 4a791574a0cc ("scsi: ufs: ufs-qcom: Disable interrupt in reset path") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-7-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove the warning message when core_reset is not availableManivannan Sadhasivam
core_reset is optional, so there is no need to warn the user if it is not available. Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-6-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Remove superfluous variable assignmentsManivannan Sadhasivam
There are many instances where the variable assignments are not needed. Remove them. Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-5-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Fix the return value when platform_get_resource_byname() failsManivannan Sadhasivam
The return value should be -ENODEV indicating that the resource is not provided in DT, not -ENOMEM. Fix it! Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions") Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-4-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Fix the return value of ufs_qcom_ice_program_key()Manivannan Sadhasivam
Currently, the function returns -EINVAL if algorithm other than AES-256-XTS is requested. But the correct error code is -EOPNOTSUPP. Fix it! Cc: Abel Vesa <abel.vesa@linaro.org> Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: qcom: Use clk_bulk APIs for managing lane clocksManivannan Sadhasivam
Lane clock handling can be simplified by using the clk_bulk APIs. So let's make use of them. This also get's rid of the clock validation in the driver as kernel should just rely on the firmware (DT/ACPI) to provide the clocks required for proper functioning. Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-2-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Add support for UFS device version detectionBao D. Nguyen
Start from HW ver 5, a spare register in UFS host controller is added and used to indicate the UFS device version. The spare register is populated by bootloader for now, but in future it will be populated by HW automatically during link startup with its best efforts in any boot stage prior to Linux. During host driver init, read the spare register, if it is not populated with a UFS device version, go ahead with the dual init mechanism. If a UFS device version is in there, use the UFS device version together with host controller's HW version to decide the proper PHY gear which should be used to configure the UFS PHY without going through the second init. Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-9-git-send-email-quic_cang@quicinc.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Check return value of phy_set_mode_ext()Can Guo
In ufs_qcom_power_up_sequence(), check return value of phy_set_mode_ext() and stop proceeding if phy_set_mode_ext() fails. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-8-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 4 and newerCan Guo
Since HW ver 4, max HS gear can be get from UFS host controller's register, use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that we don't need to update the hard code for newer targets in future. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-7-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5Can Guo
Qcom UFS hosts, with HW ver 5, can only support up to HS-G5 Rate-A due to HW limitations. If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, so that the subsequent power mode changes shall stick to Rate-A. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-6-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gearCan Guo
During host driver init, the phy_gear is set to the minimum supported gear (HS_G2). Then, during the first power mode change, the negotiated gear, say HS-G4, is updated to the phy_gear variable so that in the second init the updated phy_gear can be used to program the PHY. But the current code only allows update the phy_gear to a higher value. If one wants to start the first init with the maximum support gear, say HS-G4, the phy_gear is not updated to HS-G3 if the device only supports HS-G3. The original check added there is intend to make sure the phy_gear won't be updated when gear is scaled down (during clock scaling). Update the check so that one can start the first init with the maximum support gear without breaking the original fix by checking the ufshcd_state, that is, allow update to phy_gear only if power mode change is invoked from ufshcd_probe_hba(). Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-5-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: Setup host power mode during initCan Guo
Setup host power mode and its limitations during UFS host driver init to avoid repetitive work during every power mode change. Acked-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-4-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()Can Guo
In ufs_qcom_pwr_change_notify(), host_params.hs_rate has been set to PA_HS_MODE_B by ufshcd_init_host_param(), hence remove the duplicated line of work. Meanwhile, removed the macro UFS_QCOM_LIMIT_HS_RATE as it is only used here. Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-3-git-send-email-quic_cang@quicinc.com Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_paramsCan Guo
Structure ufs_dev_params is actually used in UFS host drivers to declare host specific power mode parameters, like ufs_<vendor>_params or host_cap, which makes the code not very straightforward to read. Rename the structure ufs_dev_params to ufs_host_params and unify the declarations in all drivers to host_params. In addition, rename the two functions ufshcd_init_pwr_dev_param() and ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to avoid confusions. This change does not change any functionalities or logic. Acked-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/1701520577-31163-2-git-send-email-quic_cang@quicinc.com Reviewed-by: Peter Wang <peter.wang@mediatek.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-13scsi: ufs: core: Store min and max clk freq from OPP tableNitin Rawat
OPP support added by commit 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") doesn't update the min_freq and max_freq of each clock in 'struct ufs_clk_info'. But these values are used by the host drivers internally for controller configuration. When the OPP support is enabled in devicetree, these values will be 0, causing boot issues on the respective platforms. So add support to parse the min_freq and max_freq of all clocks while parsing the OPP table. Fixes: 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP") Co-developed-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20231208131331.12596-1-quic_nitirawa@quicinc.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-16scsi: ufs: core: Add support for parsing OPPManivannan Sadhasivam
OPP framework can be used to scale the clocks along with other entities such as regulators, performance state etc... So let's add support for parsing OPP from devicetree. OPP support in devicetree is added through the "operating-points-v2" property which accepts the OPP table defining clock frequency, regulator voltage, power domain performance state etc... Since the UFS controller requires multiple clocks to be controlled for proper working, devm_pm_opp_set_config() has been used which supports scaling multiple clocks through custom ufshcd_opp_config_clks() callback. It should be noted that the OPP support is not compatible with the old "freq-table-hz" property. So only one can be used at a time even though the UFS core supports both. Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231012172129.65172-4-manivannan.sadhasivam@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-09scsi: ufs: qcom: Remove unnecessary checkDan Carpenter
The "attr" pointer points to an offset into the "host" struct so it can't be NULL. Delete the if statement and pull the code in a tab. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/fe3b8fcd-64a7-4887-bddd-32239a88a6a3@moroto.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-09scsi: ufs: ufs-pci: Switch to use acpi_evaluate_dsm_typed()Andy Shevchenko
The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231002135125.2602895-1-andriy.shevchenko@linux.intel.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27Merge patch series "UFS core patches"Martin K. Petersen
Bart Van Assche <bvanassche@acm.org> says: Hi Martin, Please consider these UFS core patches for the next merge window. Thanks, Bart. Link: https://lore.kernel.org/r/20230921192335.676924-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-27scsi: ufs: core: Move the 4K alignment code into the Exynos driverBart Van Assche
The DMA alignment for the Exynos controller follows directly from the PRDT segment size configured in ufs-exynos.c. Hence, move the DMA alignment code into the Exynos driver source code. Cc: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-21scsi: ufs: Convert all platform drivers to return voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). All platform drivers below drivers/ufs/ unconditionally return zero in their remove callback and so can be converted trivially to the variant returning void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230917145722.1131557-1-u.kleine-koenig@pengutronix.de Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13Merge patch series "scsi: ufs: qcom: Align programming sequence as per HW spec"Martin K. Petersen
Nitin Rawat <quic_nitirawa@quicinc.com> says: This patch series adds programming support for Qualcomm UFS V4 and above to align avoid with Hardware Specification. This patch series will address stability and performance issues. In this patch series below changes are taken care. 1) Register layout for DME_VS_CORE_CLK_CTRL has changed for v4 and above. 2) Adds Support to configure PA_VS_CORE_CLK_40NS_CYCLES attibute for UFS V4 and above. 3) Adds Support to configure multiple unipro frequencies like 403MHz, 300MHz, 202MHz, 150 MHz, 75Mhz, 37.5 MHz for Qualcomm UFS Controller V4 and above. 4) Allow configuration of SYS1CLK_1US_REG for UFS V4 and above. Link: https://lore.kernel.org/r/20230905052400.13935-1-quic_nitirawa@quicinc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: ufs: qcom: Rename "hs_gear" to "phy_gear"Manivannan Sadhasivam
The "hs_gear" variable is used to cache the gear setting for the PHY that will be used during ufs_qcom_power_up_sequence(). But it creates ambiguity with the gear setting used by the ufshcd driver. So let's rename it to "phy_gear" to make it explicit that this variable caches the gear setting for the PHY. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230908145329.154024-2-manivannan.sadhasivam@linaro.org Reviewed-by: Can Guo <quic_cang@quicinc.com> Tested-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: ufs: qcom: Update PHY settings only when scaling to higher gearsManivannan Sadhasivam
The "hs_gear" variable is used to program the PHY settings (submode) during ufs_qcom_power_up_sequence(). Currently, it is being updated every time the agreed gear changes. Due to this, if the gear got downscaled before suspend (runtime/system), then while resuming, the PHY settings for the lower gear will be applied first and later when scaling to max gear with REINIT, the PHY settings for the max gear will be applied. This adds a latency while resuming and also really not needed as the PHY gear settings are backwards compatible i.e., we can continue using the PHY settings for max gear with lower gear speed. So let's update the "hs_gear" variable _only_ when the agreed gear is greater than the current one. This guarantees that the PHY settings will be changed only during probe time and fatal error condition. Due to this, UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH can now be skipped when the PM operation is in progress. Cc: stable@vger.kernel.org Fixes: 96a7141da332 ("scsi: ufs: core: Add support for reinitializing the UFS device") Reported-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230908145329.154024-1-manivannan.sadhasivam@linaro.org Reviewed-by: Can Guo <quic_cang@quicinc.com> Tested-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: ufs: qcom: Configure SYS1CLK_1US_REG for UFS V4 and aboveNitin Rawat
SYS1CLK_1US represents the required number of system 1-clock cycles for one microsecond. UFS Host Controller V4.0 and above mandates to write SYS1CLK_1US_REG register and also these timer configuration needs to be called from clk scaling pre ops as per HPG. Refactor ufs_qcom_cfg_timers and add the below code support to align with HPG. a)Configure SYS1CLK_1US_REG for UFS V4 and above. b)Introduce a new argument is_pre_scale_up for ufs_qcom_cfg_timers to configure SYS1CLK_1US for max freq during prescale and link startup condition. c)Move ufs_qcom_cfg_timers from clk scaling post change ops to clk scaling pre change ops. Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20230905052400.13935-6-quic_nitirawa@quicinc.com Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: ufs: qcom: Align programing of unipro clk attributesNitin Rawat
Currently CORE_CLK_1US_CYCLES, PA_VS_CORE_CLK_40NS_CYCLES are configured in clk scaling post change ops. This is not aligning to HPG. Move this to clk scaling pre change ops to align completely with hardware specification. Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20230905052400.13935-5-quic_nitirawa@quicinc.com Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: ufs: qcom: Add support to configure PA_VS_CORE_CLK_40NS_CYCLESNitin Rawat
PA_VS_CORE_CLK_40NS_CYCLES attribute represents the required number of Qunipro core clock for 40 nanoseconds. For UFS host controller V4 and above PA_VS_CORE_CLK_40NS_CYCLES needs to be programmed as per frequency of unipro core clk of UFS host controller. Add Support to configure PA_VS_CORE_CLK_40NS_CYCLES for Controller V4 and above to align with the hardware specification and to avoid functionality issues like h8 enter/exit failure, command timeout. Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20230905052400.13935-4-quic_nitirawa@quicinc.com Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:40:34 +0000