summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2023-03-17serial: Use B0 instead of implicit zero assumptionIlpo Järvinen
Compare against B0 rather than assume B0 equals zero, which is true for all archs but explicit B0 makes the code more obvious. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230309080923.11778-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17serial: Use ARRAY_SIZE() with iso7816 reserved arrayIlpo Järvinen
Instead of a literal, size the for loop iteration based on the actual array using ARRAY_SIZE(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230309080923.11778-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16serial: sprd: Drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/tty/serial/sprd_serial.c:1242:34: error: ‘serial_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20230310222957.315848-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16serial: sh-sci: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/tty/serial/sh-sci.c:3144:34: error: ‘of_sci_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230310222957.315848-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16serial: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230310144727.1545699-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16serial: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230310144727.1545630-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: sc16is7xx: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-09tty: vt: protect KD_FONT_OP_GET_TALL from unbound accessSamuel Thibault
In ioctl(KD_FONT_OP_GET_TALL), userland tells through op->height which vpitch should be used to copy over the font. In con_font_get, we were not checking that it is within the maximum height value, and thus userland could make the vc->vc_sw->con_font_get(vc, &font, vpitch); call possibly overflow the allocated max_font_size bytes, and the copy_to_user(op->data, font.data, c) call possibly read out of that allocated buffer. By checking vpitch against max_font_height, the max_font_size buffer will always be large enough for the vc->vc_sw->con_font_get(vc, &font, vpitch) call (since we already prevent loading a font larger than that), and c = (font.width+7)/8 * vpitch * font.charcount will always remain below max_font_size. Fixes: 24d69384bcd3 ("VT: Add KD_FONT_OP_SET/GET_TALL operations") Reported-by: syzbot+3af17071816b61e807ed@syzkaller.appspotmail.com Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230306094921.tik5ewne4ft6mfpo@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: ipwireless: move Kconfig entry to ttyJiri Slaby
The ipwireless' Kconfig entry is currently sitting in char/pcmcia. But the driver is in tty/. So move the entry to tty/ too. First, it makes sense to have the entry along the driver. Second, whole char/pcmcia is about to pass away. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Link: https://lore.kernel.org/r/20230222092302.6348-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: drop bogus uart_write_wakeup()Johan Hovold
Drop the bogus uart_write_wakeup() from when setting up a new DMA transfer, which does not free up any more space in the ring buffer. Any pending writers will be woken up when the transfer completes. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix mapping of empty DMA bufferJohan Hovold
Make sure that there is data in the ring buffer before trying to set up a zero-length DMA transfer. This specifically fixes the following warning when unmapping the empty buffer on the sc8280xp-crd: WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8 ... Call trace: iommu_dma_unmap_page+0xbc/0xd8 dma_unmap_page_attrs+0x30/0x1c8 geni_se_tx_dma_unprep+0x28/0x38 qcom_geni_serial_isr+0x358/0x75c Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix DMA mapping leak on shutdownJohan Hovold
Fix what appears to be a copy-paste error that can lead to a leaked DMA mapping on close() and failure to restart TX after the port is reopened. Note that rx_dma_addr is generally NULL when qcom_geni_serial_stop_tx_dma() is called as part of shutdown() (but tx_dma_addr need not be). Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix console shutdown hangJohan Hovold
A recent commit added back the calls top stop tx and rx to shutdown() which had previously been removed by commit e83766334f96 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown") in order to be able to use kgdb after stopping the getty. Not only did this again break kgdb, but it also broke serial consoles more generally by hanging TX when stopping the getty during reboot. The underlying problem has been there since the driver was first merged and fixing it is going to be a bit involved so simply stop calling the broken stop functions during shutdown for consoles for now. Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}Biju Das
As per RZ/V2M hardware manual(Rev.1.30 Jun, 2022), UART IP has a restriction as mentioned below. 40.6.1 Point for Caution when Changing the Register Settings: When changing the settings of the following registers, a PRESETn master reset or FIFO reset + SW reset (FCR[2],FCR[1], HCR0[7]) must be input to re-initialize them. Target Registers: FCR, LCR, MCR, DLL, DLM, HCR0. Add serial8250_em_reg_update() and serial8250_em_serial_out_helper() to handle this restriction. serial8250_em_serial_out_helper() is identical to previous serial8250_em_serial_out() except that UART_FCR macro is removed from serial8250_em_serial_out_helper() as it is now handled by serial8250_ em_serial_out(). DLL/DLM register can be updated only by setting LCR[7]. So the updation of LCR[7] will perform reset for DLL/DLM register changes. EMMA mobile has the same register set as RZ/V2M and this patch is tested on EMEV2 board. So, there is no harm in applying the same restriction here as well as the HW manual for EMMA mobile is not updated for a long time. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-8-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Use pseudo offset for UART_FCRBiju Das
UART_FCR shares the same offset with UART_IIR. We cannot use UART_FCR in serial8250_em_serial_in() as it overlaps with UART_IIR. Define UART_FCR_EM macro with a high value to avoid overlapping with existing UART_* register defines and define another macro UART_FCR_EM_HW for the real offset. Use these macros in serial8250_em_serial{_in/_out} function to read/write FCR register. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-7-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Use devm_clk_get_enabled()Biju Das
Simplify clk handling in probe() by replacing devm_clk_get()->devm_ clk_get_enabled(). This replaces the usage of clk_prepare_enable/clk_ disable_unprepare() in probe()/remove(). After that sclk is no longer required in struct serial8250_em_priv and is replaced by a local variable sclk in probe(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-6-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Add missing break statementBiju Das
Add missing break statement in serial8250_em_serial_out(). Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-5-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Drop unused header fileBiju Das
Drop unused header file slab.h from the driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-4-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Simplify probe()Biju Das
Simplify probe() by using dev_err_probe() instead of dev_err() and add a local variable 'dev' to replace '&pdev->dev'. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Fix UART port typeBiju Das
As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: meson: Add a new compatible string for the G12A SoCMartin Blumenstingl
Amlogic Meson G12A (and later) SoCs also have the "divide XTAL by 2" bit as the S4 UART controllers. Add a new compatible string for these SoCs and enable the has_xtal_div2 flag for them. Tested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230307222651.2106615-3-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: stm32: Re-assert RTS/DE GPIO in RS485 mode only if more data are ↵Marek Vasut
transmitted The stm32_usart_transmit_chars() may be called with empty or stopped transmit queue, and no XON/OFF character pending. This can happen at the end of transmission, where this last call is used to either handle the XON/XOFF x_char, or disable TX interrupt if queue is empty or stopped. If that occurs, do not assert the RS485 RTS/DE GPIO anymore, as the GPIO would remain asserted past the end of transmission and that would block the RS485 bus after the transmission. Only assert the RS485 RTS/DE GPIO if there is either pending XON/XOFF x_char, or at least one character in running transmit queue. Fixes: d7c76716169d ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230223042252.95480-2-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: stm32: Remove unused struct stm32_port txdone elementMarek Vasut
The txdone element is only ever assigned, once, and never used. Drop it. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230223042252.95480-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: simplify sysctl registrationLuis Chamberlain
register_sysctl_table() is a deprecated compatibility wrapper. register_sysctl_init() can do the directory creation for you so just use that Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230302204612.782387-7-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: imx: Drop a few unneeded castsUwe Kleine-König
There is no point in casting a struct uart_port to a struct imx_port just to access the first member of the latter (a struct uart_port). This introduces no code changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230302115417.1860210-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: tty_ldisc: Remove the ret variableLi zeming
The int variable ret does not receive the return value in this function. It should be removed and returned 0 directly. Signed-off-by: Li zeming <zeming@nfschina.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230222202303.3195-1-zeming@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serdev: Set fwnode for serdev devicesSaravana Kannan
This allow fw_devlink to do dependency tracking for serdev devices. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/lkml/03b70a8a-0591-f28b-a567-9d2f736f17e5@gmail.com/ Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230302023509.319903-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin
From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by defaultKumaravel Thiagarajan
Commit 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") made the SERIAL_8250_PCI1XXXX driver enabled when SERIAL_8250 is enabled, disable it as this driver does not need to be enabled by default Fixes: 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/lkml/CAHk-=whhFCeeuo6vTEmNSx6S-KKkugxgzN_W5Z6v-9yH9gc3Zw@mail.gmail.com/ Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230305145124.13444-1-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_fsl: fix handle_irq lockingJohan Hovold
The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Fix UART port typeBiju Das
As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: skip waiting for transmission complete when ↵Sherry Sun
UARTCTRL_SBK is asserted According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config ↵Tom Rix
dependency" This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30. This results in a link error of ld: drivers/tty/serial/earlycon.o: in function `parse_options': drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon' When the config is in this state CONFIG_SERIAL_CORE=m CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_FSL_LPUART=m CONFIG_SERIAL_FSL_LPUART_CONSOLE=y Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency") Cc: stable <stable@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-27vc_screen: don't clobber return value in vcs_readThomas Weißschuh
Commit 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop. While doing this it also moved the unconditional assignment of ret = -ENXIO; This unconditional assignment was valid outside the loop but within it it clobbers the actual value of ret. To avoid this only assign "ret = -ENXIO" when actually needed. [ Also, the 'goto unlock_out" needs to be just a "break", so that it does the right thing when it exits on later iterations when partial success has happened - Linus ] Reported-by: Storm Dragon <stormdragon2976@gmail.com> Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/ Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-27vc_screen: modify vcs_size() handling in vcs_read()George Kennedy
Restore the vcs_size() handling in vcs_read() to what it had been in previous version. Fixes: 226fae124b2d ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF") Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24Merge tag 'tty-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
2023-02-20Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
2023-02-16tty: n_gsm: add keep alive supportDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test command which can be used to test the mux connection between both sides. Currently, no algorithm is implemented to make use of this command. This requires that each multiplexed upper layer protocol supervises the underlying muxer connection to handle possible connection losses. Introduce ioctl commands and functions to optionally enable keep alive handling via the test command as described in chapter 5.4.6.3.4. A single incrementing octet "ka_num" is being used for unique identification of each single keep alive packet. Retries will use the same "ka_num" value as the original packet. Retry count and interval are taken from the general parameters N2 and T2. Add usage description and basic example for the new ioctl to the n_gsm documentation. Note that support for the test command is mandatory and already present in the muxer implementation since the very first version. Also note that the previous ioctl structure gsm_config cannot be extended due to missing checks against zero of the field "unused". Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16serial: imx: remove a redundant checkTom Rix
cpp_check reports drivers/tty/serial/imx.c:1207:15: style: Condition 'r_bytes>0' is always true [knownConditionTrueFalse] if (r_bytes > 0) { r_byte is set to r_bytes = rx_ring->head - rx_ring->tail; The head - tail calculation is also done by the earlier check if (rx_ring->head <= sg_dma_len(sgl) && rx_ring->head > rx_ring->tail) { so r_bytes will always be > 0, so the second check is not needed. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230211154550.2130670-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.hElliot Berman
Move include/linux/qcom-geni-se.h to include/linux/soc/qcom/geni-se.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Acked-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Link: https://lore.kernel.org/r/20230203210133.3552796-1-quic_eberman@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08tty: n_gsm: add TIOCMIWAIT supportDaniel Starke
Add support for the TIOCMIWAIT ioctl on the virtual ttys. This enables the user to wait for virtual modem signals like RING. More work is needed to support also TIOCGICOUNT. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230206114606.2133-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08tty: n_gsm: add RING/CD control supportDaniel Starke
The status lines ring and carrier detect are used by the modem to signal incoming calls (RING) or an established connection (CD). This is implemented as physical lines on a standard RS232 connection. However, the muxer protocol encodes these status lines as modem bits IC and DV. These incoming lines are masked by tty driver (see tty_io.c) and cannot be set by a user application. Allow setting RING via TIOCM_OUT1 and CD via TIOCM_OUT2 to allow implementation of a modem or modem emulator. Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230206114606.2133-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: get rid of registers shadowingSergey Organov
Neither registers shadowing is functionally needed as all the registers are read-write, nor the shadowing makes much sense for speed-up, as most speed critical reads/writes (of data Rx/Tx registers) are not shadowed anyway. Moreover, the shadowing code is obviously pure overhead on the write path. Get rid of the shadowing code and variables due to above considerations. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201141603.4205-1-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: refine local variables in rxint()Sergey Organov
The 'rx' is chip register, similar to 'usr2', so let it be of 'u32' type as well. Move 'flg' to be FIFO read loop local as it's not used outside. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-8-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: stop using USR2 in FIFO reading loopSergey Organov
The chip provides all the needed bits in the URXD0 register that we read anyway for data, so get rid of reading USR2 and use only URXD0 bits instead. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-7-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: remove redundant USR2 read from FIFO reading loopSergey Organov
There is no need to read USR2 twice at every loop iteration: get rid of the second read. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-6-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: do not break from FIFO reading loop prematurelySergey Organov
There is no reason to prematurely break out of FIFO reading loop, and it might cause needless reenters into ISR, so keep reading until FIFO is empty. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-5-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-08serial: imx: do not sysrq broken charsSergey Organov
Do not call uart_handle_sysrq_char() if we got any receive error along with the character, as we don't want random junk to be considered a sysrq. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-4-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:45:26 +0000