summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2024-05-04serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeupPin-yen Lin
When Rx in-band wakeup is enabled, set RTS to true in mtk8250_shutdown() so the connected device can still send message and trigger IRQ when the system is suspended. Fixes: 18c9d4a3c249 ("serial: When UART is suspended, set RTS to false") Cc: stable <stable@kernel.org> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Link: https://lore.kernel.org/r/20240424130619.2924456-1-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: n_gsm: fix missing receive state reset after mode switchDaniel Starke
The current implementation uses either gsm0_receive() or gsm1_receive() depending on whether the user configured the mux in basic or advanced option mode. Both functions share some state values over the same logical elements of the frame. However, both frame types differ in their nature. gsm0_receive() uses non-transparency framing, whereas gsm1_receive() uses transparency mechanism. Switching between both modes leaves the receive function in an undefined state when done during frame reception. Fix this by splitting both states. Add gsm0_receive_state_check_and_fix() and gsm1_receive_state_check_and_fix() to ensure that gsm->state is reset after a change of gsm->receive. Note that gsm->state is only accessed in: - gsm0_receive() - gsm1_receive() - gsm_error() Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20240424054842.7741-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: n_gsm: fix possible out-of-bounds in gsm0_receive()Daniel Starke
Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218708 Tested-by: j51569436@gmail.com Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20240424054842.7741-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: core: Call device_set_awake_path() for console portClaudiu Beznea
In case the UART port is used as a console, no_console_suspend is available in bootargs and UART port is part of a software-controlled power domain we need to call device_set_awake_path(). This lets the power domain core code know that this domain should not be powered off during system suspend. Otherwise, the UART port power domain is turned off, nothing is printed while suspending and the suspend/resume process is blocked. This was detected on the Renesas RZ/G3S SoC while adding support for power domains. Based on code investigation (on v6.9-rc5), this issue is present on other SoCs (e.g., Renesas R-Mobile A1 [1], IMX8QXP [2]) and different SoCs have particular implementation to handle it. Due to this the patch added the call of device_set_awake_path() in uart_suspend_port() instead of having it in the platform specific UART driver. [1] drivers/pmdomain/renesas/rmobile-sysc.c:116 [2] drivers/pmdomain/imx/scu-pd.c:357 Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240430095930.2806067-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04tty: serial: uartps: Add support for uartps controller resetManikanta Guntupalli
Add support for an optional reset for the uartps controller using the reset driver. If the uartps node contains the "resets" property, then cdns_uart_startup performs uartps controller non-pulse out of reset and reset in exit path. Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20240425062358.1347684-4-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()Andy Shevchenko
The SIMPLE_DEV_PM_OPS() is deprecated, replace it with the DEFINE_SIMPLE_DEV_PM_OPS() and use pm_sleep_ptr() for setting the driver's PM routines. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240422083237.207447-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Keep the includes sortedAndy Shevchenko
Keep the includes sorted. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-14-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()Andy Shevchenko
Make type of bit parameter and returned one the same in exar_ee_*_bit(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-13-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use BIT() in exar_ee_read()Andy Shevchenko
Use BIT() in exar_ee_read() like other functions do. While at it, explain the EEPROM type and the dummy bit requirement. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-12-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Switch to use dev_err_probe()Andy Shevchenko
Switch to use dev_err_probe() to simplify the error path and unify a message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-11-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Return directly from switch-casesAndy Shevchenko
There are two similar switch-cases which use different style. Unify them and one more to return from the cases directly. While at it, add missing default in another switch-case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-10-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Decrease indentation levelAndy Shevchenko
Decrease indentation level in some places. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-9-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill unneeded ->board_init()Andy Shevchenko
We may reuse ->setup() for the same purpose as it was done before. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-8-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Extract cti_board_init_osc_freq() helperAndy Shevchenko
Extract cti_board_init_osc_freq() helper to avoid code duplication. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Trivia typo fixesAndy Shevchenko
Trivia typo fixes: interupts --> interrupts and others. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Use PCI_SUBVENDOR_ID_IBM for subvendor IDAndy Shevchenko
Use PCI_SUBVENDOR_ID_IBM for subvendor ID instead of vendor one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Kill CTI_PCI_DEVICE()Andy Shevchenko
The CTI_PCI_DEVICE() duplicates EXAR_DEVICE(). Kill the former. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Describe all parameters in kernel docAndy Shevchenko
Kernel doc validator is not happy: warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17c15x_xr17v25x' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_fpga' warning: Function parameter or struct member 'pcidev' not described in 'cti_get_port_type_xr17v35x' Add missed descriptions. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-04serial: 8250_exar: Don't return positive values as error codesAndy Shevchenko
PCI core may return positive codes for the specific errors. There is a special API to convert them to negative stanrard ones. Use that API to avoid returning positive values as error codes. Fixes: f7ce07062988 ("serial: exar: add CTI specific setup code") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/20240503171917.2921250-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03alpha: remove DECpc AXP150 (Jensen) supportArnd Bergmann
This is one of the hackiest Alpha machines, and the only one without PCI support. Removing this allows cleaning up code in eise and tty drivers in addition to the architecture code. Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-26serial: kgdboc: Fix NMI-safety problems from keyboard reset codeDaniel Thompson
Currently, when kdb is compiled with keyboard support, then we will use schedule_work() to provoke reset of the keyboard status. Unfortunately schedule_work() gets called from the kgdboc post-debug-exception handler. That risks deadlock since schedule_work() is not NMI-safe and, even on platforms where the NMI is not directly used for debugging, the debug trap can have NMI-like behaviour depending on where breakpoints are placed. Fix this by using the irq work system, which is NMI-safe, to defer the call to schedule_work() to a point when it is safe to call. Reported-by: Liuye <liu.yeC@h3c.com> Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/ Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2024-04-25tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-7-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23Merge 6.9-rc5 into tty-nextGreg Kroah-Hartman
We want the tty fixes in here as well, and it resolves a merge conflict in: drivers/tty/serial/serial_core.c as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-20serial: msm: check dma_map_sg() return value properlyJiri Slaby (SUSE)
The -next commit f8fef2fa419f (tty: msm_serial: use dmaengine_prep_slave_sg()), switched to using dma_map_sg(). But the return value of dma_map_sg() is special: it returns number of elements mapped. And not a standard error value. The commit also forgot to reset dma->tx_sg in case of this failure. Fix both these mistakes. Thanks to Marek who helped debugging this. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20240419080931.30949-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: fix checkpach warningsParker Newman
-Fix several "missing identifier name" warnings from checkpatch in struct exar8250_platform and struct exar8250_board. Example: WARNING: function definition argument <arg> should also have an identifier name - Fix space before tab warning from checkpatch: WARNING: please, no space before tabs + * 0^I^I2 ^IMode bit 0$ Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/f7fa6c16cb5f2c8c1c7cb7d29f80bc7be53f91ab.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI specific setup codeParker Newman
This is a large patch but is only additions. All changes and removals are made in previous patches in this series. - Add CTI board_init and port setup functions for each UART type - Add CTI_EXAR_DEVICE() and CTI_PCI_DEVICE() macros - Add support for reading a word from the Exar EEPROM. - Add support for configuring and setting a single MPIO - Add various helper functions for CTI boards. - Add osc_freq to struct exar8250 Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/ae4a66e7342b686cb8d4b15317585dfb37222cf4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add CTI cards to exar_get_nr_portsParker Newman
Add code for getting number of ports of CTI cards to exar_get_nr_ports(). Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0c64bdf852f39aec966b38696695d951e485d7e6.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: moved generic_rs485 further up in 8250_exar.cParker Newman
Preparatory patch moving generic_rs485_config and generic_rs485_supported higher in the file to allow for CTI setup functions to use them. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/a7bf2a42de759908c058246ec15f60bde9a5dc65.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: add optional board_init functionParker Newman
Add an optional "board_init()" function pointer to struct exar8250_board which is called once during probe prior to setting up the ports. It will be used in subsequent patches of this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0e72a3154114c733283ff273bc1e31456ee101f4.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: added a exar_get_nr_ports functionParker Newman
Moved code for getting number of ports from exar_pci_probe() to a separate exar_get_nr_ports() function. CTI specific code will be added in another patch in this series. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/33f2bf66bc334573c10cf670a299ecef0b7264bc.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18serial: exar: remove old Connect Tech setupParker Newman
Preparatory patch removing existing Connect Tech setup code and CONNECT_DEVICE macro. Subsequent patches in this series will add in new UART family specific setup code and new device definition macros to allow for supporting CTI serial cards with Exar PCI IDs and CTI PCI IDs. Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/06a04b6c683ca20c50646cc0836be869c2dacd87.1713382717.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: stm32: Reset .throttled state in .startup()Uwe Kleine-König
When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: stm32: Return IRQ_NONE in the ISR if no handling happendUwe Kleine-König
If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: exar: adding missing CTI and Exar PCI idsParker Newman
- Added Connect Tech and Exar IDs not already in pci_ids.h Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_pnp: Support configurable reg shift propertyGuanbing Huang
The 16550a serial port based on the ACPI table requires obtaining the reg-shift attribute. In the ACPI scenario, If the reg-shift property is not configured like in DTS, the 16550a serial driver cannot read or write controller registers properly during initialization. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/4726ecea8f7bfbfe42501b4f6ad9fe5b38994574.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: port: Add support of PNP IRQ to __uart_read_properties()Guanbing Huang
The function __uart_read_properties doesn't cover PNP devices, so add IRQ processing for PNP devices in the branch. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/7f4ca31ef1cab4c6ecad22fafd82117686b696be.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_dw: Hide a cast in dw8250_serial_inq()Andy Shevchenko
dw8250_serial_inq() uses unsigned int variable to store 8-bit value. Due to that it needs a cast which can be avoided by switching to use u8 instead of unsigned int. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240412173937.187442-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_dw: Deduplicate LCR checksAndy Shevchenko
All callers of dw8250_check_lcr() perform the same check. Deduplicate it by moving them into respective call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240412173931.187411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17tty: serial: fsl_lpuart: use dev_err_probe for clocksAlexander Stein
Clocks might not be available yet when probing lpuart. Silence -517 errors by using dev_err_probe. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240411130449.1096090-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: imx: Introduce timeout when waiting on transmitter emptyEsben Haabendal
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue. Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: core: Extract uart_alloc_xmit_buf() and uart_free_xmit_buf()Andy Shevchenko
After conversion to the kfifo, it becomes possible to extract two helper functions for better maintenance and code deduplication. Do it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409174057.1104262-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: drop debugging WARN_ON_ONCE() from uart_put_char()Jiri Slaby (SUSE)
Pengfei Xu reports, that the -next commit 1788cf6a91d9 (tty: serial: switch from circ_buf to kfifo) tries to emit a WARNING and that leads to lockdep errors. Obviously we cannot print anything from uart_put_char()! This WARN_ON_ONCE() was/is a debug aid to check if the condition in uart_put_char() can happen at all. Pengfei Xu confirmed it can. Unlike me and kbuild bot in my queue. Second, I completely forgot about it, so I did not remove it in the final version, nor mentioned it in the commit log. Drop it now as we are all good. And we even have stack traces (and a reproducer)! Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Link: https://lore.kernel.org/r/20240416071904.21440-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-16serial: meson+qcom: don't advance the kfifo twiceJiri Slaby (SUSE)
Marek reports, that the -next commit 1788cf6a91d9 (tty: serial: switch from circ_buf to kfifo) broke meson_uart and qcom_geni_serial. The commit mistakenly advanced the kfifo twice: once by uart_fifo_get()/kfifo_out() and second time by uart_xmit_advance(). To advance the fifo only once, drop the superfluous uart_xmit_advance() from both. To count the TX statistics properly, use uart_fifo_out() in qcom_geni_serial (meson_uart_start_tx() already uses that). I checked all other uses of uart_xmit_advance() and they appear correct: either they are finishing DMA transfers or are after peek/linear_ptr (i.e. they do not advance fifo). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240416054825.6211-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13serial: core: Fix ifdef for serial base console functionsTony Lindgren
If CONFIG_SERIAL_CORE_CONSOLE is not set, we get build errors. Let's fix the issue by moving the endif after the serial base console functions. Fixes: 4547cd76f08a ("serial: 8250: Fix add preferred console for serial8250_isa_init_ports()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404131416.VJljwvkS-lkp@intel.com/ Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240413103343.24231-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11tty/sysrq: Replay kernel log messages on consoles via sysrqSreenath Vijayan
When terminal is unresponsive, one cannot use dmesg to view the printk ring buffer messages. Also, syslog services may be disabled, especially on embedded systems, to check the messages after a reboot. In this scenario, replay the messages in printk ring buffer on consoles via sysrq by pressing sysrq+R. The console loglevel will determine which all kernel log messages are displayed. The messages will be displayed only when console_trylock() succeeds. Users could repeat the sysrq key when it fails. If the owner of console subsystem lock is stuck, repeating the key won't work. Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shimoyashiki Taichi <taichi.shimoyashiki@sony.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sreenath Vijayan <sreenath.vijayan@sony.com> Link: https://lore.kernel.org/r/cc3b9b1aae60a236c6aed1dc7b0ffa2c7cd1f183.1710220326.git.sreenath.vijayan@sony.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: core: Fix missing shutdown and startup for serial base portTony Lindgren
We are seeing start_tx being called after port shutdown as noted by Jiri. This happens because we are missing the startup and shutdown related functions for the serial base port. Let's fix the issue by adding startup and shutdown functions for the serial base port to block tx flushing for the serial base port when the port is not in use. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable <stable@kernel.org> Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: max3100: Convert to_max3100_port() to be static inlineAndy Shevchenko
As Jiri rightfully pointed out the current to_max3100_port() macro implementation is fragile in a sense that it expects the variable name to be port, otherwise it blow up the build. Change this to be static inline to prevent bad compilation. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240410141135.1378948-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: omap: remove redundant assignment to variable tmoutColin Ian King
Variable tmout is being assigned a value that is never read, it is being re-assinged in the following for-loop statement. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/tty/serial/omap-serial.c:1096:3: warning: Value stored to 'tmout' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240411085537.306020-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: 8250: Fix add preferred console for serial8250_isa_init_ports()Tony Lindgren
We need to inline serial_base_add_isa_preferred_console() based on CONFIG_SERIAL_8250_CONSOLE and not based on CONFIG_SERIAL_CORE_CONSOLE. Otherwise we can get the follwoing error as noted by Stephen: ERROR: modpost: "serial_base_add_isa_preferred_console" [drivers/tty/serial/8250/8250.ko] undefined! We also have a duplicate inlined serial_base_add_isa_preferred_console(), in serial_base_bus.c added by the same commit by accident, let's drop it. Fixes: a8b04cfe7dad ("serial: 8250: Add preferred console in serial8250_isa_init_ports()") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240411080622.11929-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg)Hugo Villeneuve
Since each I2C/SPI probe function can modify sc16is7xx_regcfg at the same time, change structure to be constant and do the required modifications on a local copy. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240409154253.3043822-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 12:02:37 +0000