summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2020-11-14thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH.Andres Freund
I noticed that I couldn't read the PCH temperature on my workstation (C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to go through IPMI. Looking at the data sheet, it looks to me like the existing intel PCH thermal driver should work without changes for Lewisburg. I suspect there's some other PCI IDs missing. But I hope somebody at Intel would have an easier time figuring that out than I... Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Tushar Dave <tushar.n.dave@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/ Signed-off-by: Andres Freund <andres@anarazel.de> Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201113204916.1144907-1-andres@anarazel.de
2020-11-12thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430Peter Ujfalusi
It has been observed that on OMAP4430 (ES2.0, ES2.1 and ES2.3) the enabled notifier causes errors on the DTEMP readout values: ti-soc-thermal 4a002260.bandgap: in range ADC val: 52 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 4 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: in range ADC val: 100 raw 100 translates to 133 Celsius on omap4-sdp, triggering shutdown due to critical temperature. When the notifier is disable for OMAP4430 the DTEMP values are stable: ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 Fixes: 5093402e5b44 ("thermal: ti-soc-thermal: Enable addition power management") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029100335.27665-1-peter.ujfalusi@ti.com
2020-11-12thermal/drivers/cpufreq_cooling: Update cpufreq_state only if state has changedZhuguangqing
If state has not changed successfully and we updated cpufreq_state, next time when the new state is equal to cpufreq_state (not changed successfully last time), we will return directly and miss a freq_qos_update_request() that should have been. Fixes: 5130802ddbb1 ("thermal: cpu_cooling: Switch to QoS requests for freq limits") Cc: v5.4+ <stable@vger.kernel.org> # v5.4+ Signed-off-by: Zhuguangqing <zhuguangqing@xiaomi.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201106092243.15574-1-zhuguangqing83@gmail.com
2020-11-12thermal/drivers/hwmon: Cleanup coding style a bitBernard Zhao
Function thermal_add_hwmon_sysfs, hwmon will be NULL when new_hwmon_device = 0, so there is no need to check, kfree will handle NULL point. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201102023121.3312-1-bernard@vivo.com
2020-11-12thermal: sun8i: Use bitmap API instead of open codeYangtao Li
The bitmap_* API is the standard way to access data in the bitfield. So convert irq_ack to return an unsigned long, and make things to use bitmap API. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201109114624.23035-1-frank@allwinnertech.com
2020-11-07thermal: intel: pch: fix S0ix failure due to PCH temperature above thresholdSumeet Pawnikar
When system tries to enter S0ix suspend state, just after active load scenarios, it fails due to PCH current temperature is higher than set threshold. This patch introduces delay loop mechanism that allows PCH temperature to go down below threshold during suspend so it won't fail to enter S0ix. Add delay loop timeout and count as module parameters for user to tune it, if required based on system design. This change notifies the different warning messages like when PCH temperature above the threshold and executing delay loop. Also, notify the messages when it success or failure for S0ix entry. Previously out of 1000 runs around 3 to 5 times it might fail to enter S0ix just after heavy workload. With this change, S0ix failures reduced as PCH cools down below threshold. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201106170633.20838-1-sumeet.r.pawnikar@intel.com
2020-10-27thermal: mtk_thermal: make device_reset optionalFabien Parent
MT8516 does not support thermal reset. Use device_reset_optional instead of device_reset. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201021164231.3029956-3-fparent@baylibre.com
2020-10-27thermal/drivers/rcar: Replace spin_lock_irqsave by spin_lock in hard IRQTian Tao
On RT or even on mainline with 'threadirqs' on the command line all interrupts which are not explicitly requested with IRQF_NO_THREAD run their handlers in thread context. The same applies to soft interrupts. That means they are subject to the normal scheduler rules and no other code is going to acquire that lock from hard interrupt context either, so the irqsave() here is pointless in all cases. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1603760790-37748-1-git-send-email-tiantao6@hisilicon.com
2020-10-27drivers/thermal/core: Optimize trip points checkBernard Zhao
The trip points are checked one by one with multiple condition branches where one condition is enough to disable the trip point. Merge all these conditions in a single 'OR' statement. Signed-off-by: Bernard Zhao <bernard@vivo.com> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201027013743.62392-1-bernard@vivo.com [dlezcano] Changed patch description
2020-10-27thermal: core: Move power_actor_set_power into IPALukasz Luba
Since the power actor section has one function power_actor_set_power() move it into Intelligent Power Allocation (IPA). There is no other user of that helper function. It would also allow to remove the check of cdev_is_power_actor() because the code which calls it in IPA already does the needed check. Make the function static since only IPA use it. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201015112441.4056-5-lukasz.luba@arm.com
2020-10-27thermal: core: Remove unused functions in power actor sectionLukasz Luba
Since the Intelligent Power Allocation (IPA) uses different way to get minimum and maximum power for a given cooling device, the helper functions are not needed. There is no other code which uses them, so remove the helper functions. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201015112441.4056-4-lukasz.luba@arm.com
2020-10-27thermal: power_allocator: Respect upper and lower bounds for cooling deviceLukasz Luba
The thermal cooling device specified in DT might be instantiated for a thermal zone trip point with a limited set of OPPs to operate on. This configuration should be supported by Intelligent Power Allocation (IPA), since it is a standard for other governors. Change the code and allow IPA to get power value of lower and upper bound set for a given cooling device. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201015112441.4056-3-lukasz.luba@arm.com
2020-10-26thermal: core: Add upper and lower limits to power_actor_set_powerMichael Kao
The upper and lower limits of thermal throttle state in the DT do not apply to the Intelligent Power Allocation (IPA) governor. Add the clamping for cooling device upper and lower limits in the power_actor_set_power() used by IPA. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201007024332.30322-1-michael.kao@mediatek.com
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-17Merge tag 'thermal-v5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Fix Kconfig typo "acces" -> "access" (Colin Ian King) - Use dev_error_probe() to simplify the error handling on imx and imx8 platforms (Anson Huang) - Use dedicated kobj_to_dev() instead of container_of() in the sysfs core code (Tian Tao) - Fix coding style by adding braces to a one line conditional statement on rcar (Geert Uytterhoeven) - Add DT binding documentation for the r8a774e1 platform and update the Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar) - Simplify the return expression of stm_thermal_prepare on the stm32 platform (Qinglang Miao) - Fix the unit in the function documentation for the idle injection cooling device (Zhuguang Qing) - Remove an unecessary mutex_init() in the core code (Qinglang Miao) - Add support for keep alive events in the core code and the specific int340x (Srinivas Pandruvada) - Remove unused thermal zone variable in devfreq and cpufreq cooling devices (Zhuguang Qing) - Add the A100's THS controller support (Yangtao Li) - Add power management on the omap3's bandgap sensor (Adam Ford) - Fix a missing nlmsg_free in the netlink core error path (Jing Xiangfeng) * tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp() thermal: ti-soc-thermal: Enable addition power management thermal: sun8i: Add A100's THS controller support thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: cooling: Remove unused variable *tz thermal: int340x: Add keep alive response method thermal: core: Add new event for sending keep alive notifications thermal: int340x: Provide notification for OEM variable change thermal: core: remove unnecessary mutex_init() thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config thermal: stm32: simplify the return expression of stm_thermal_prepare() dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support thermal: rcar_thermal: Add missing braces to conditional statement thermal: Use kobj_to_dev() instead of container_of() thermal: imx8mm: Use dev_err_probe() to simplify error handling thermal: imx: Use dev_err_probe() to simplify error handling drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"
2020-10-12thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()Jing Xiangfeng
thermal_genl_sampling_temp() misses to call nlmsg_free() in an error path. Jump to out_free to fix it. Fixes: 1ce50e7d408ef2 ("thermal: core: genetlink support for events/cmd/sampling") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200929082652.59876-1-jingxiangfeng@huawei.com
2020-10-12thermal: ti-soc-thermal: Enable addition power managementAdam Ford
The bandgap sensor can be idled when the processor is too, but it isn't currently being done, so the power consumption of OMAP3 boards can elevated if the bangap sensor is enabled. This patch attempts to use some additional power management to idle the clock to the bandgap when not needed. Signed-off-by: Adam Ford <aford173@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200911123157.759379-1-aford173@gmail.com
2020-10-12thermal: sun8i: Add A100's THS controller supportYangtao Li
This patch add thermal sensor controller support for A100, which is similar to the previous ones. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/48cc75920b5c69027134626157089d8b94942711.1595572867.git.frank@allwinnertech.com
2020-10-12thermal: sun8i: add TEMP_CALIB_MASK for calibration data in ↵Yangtao Li
sun50i_h6_ths_calibrate For sun50i_h6_ths_calibrate(), the data read from nvmem needs a round of calculation. On the other hand, the newer SOC may store other data in the space other than 12bit sensor data. Add mask operation to read data to avoid conversion error. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/dcf98648c16aff7649ff82438bfce6caae3e176f.1595572867.git.frank@allwinnertech.com
2020-10-12thermal: cooling: Remove unused variable *tzzhuguangqing
1. devfreq_cooling.c: The variable *tz is not used in devfreq_cooling_get_requested_power(), devfreq_cooling_state2power() and devfreq_cooling_power2state(). 2. cpufreq_cooling.c: After 84fe2cab48590, the variable *tz is not used anymore in cpufreq_get_requested_power(), cpufreq_state2power() and cpufreq_power2state(). Remove the variable *tz. Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200914071101.13575-1-zhuguangqing83@gmail.com
2020-10-12thermal: int340x: Add keep alive response methodSrinivas Pandruvada
When firmware requests keep alive response, send an event to user space to confirm by using imok sysfs entry. Create a new sysf entry called "imok". User space can write an integer, which results in execution of IMOK ACPI method of INT3400 thermal zone device. This results in sending response to firmware request for keep alive. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200915223650.406046-4-srinivas.pandruvada@linux.intel.com
2020-10-12thermal: int340x: Provide notification for OEM variable changeSrinivas Pandruvada
When we receive ACPI notification for OEM variable change pass the notification to user space handler. This will avoid polling for OEM variable change from user space. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200915223650.406046-2-srinivas.pandruvada@linux.intel.com
2020-10-12thermal: core: remove unnecessary mutex_init()Qinglang Miao
The mutex poweroff_lock is initialized statically. It is unnecessary to initialize by mutex_init(). Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200916062139.191233-1-miaoqinglang@huawei.com
2020-10-12thermal/idle_inject: Fix comment of idle_duration_us and name of latency_nszhuguangqing
The comment of idle_duration_us and the name of latency_ns can be misleading, so fix them. Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200917073553.898-1-zhuguangqing83@gmail.com
2020-10-12thermal: Kconfig: Update description for RCAR_GEN3_THERMAL configLad Prabhakar
The rcar_gen3_thermal driver also supports RZ/G2 SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200917152141.30070-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-10-12thermal: stm32: simplify the return expression of stm_thermal_prepare()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200921131107.93273-1-miaoqinglang@huawei.com
2020-10-12thermal: rcar_thermal: Add missing braces to conditional statementGeert Uytterhoeven
According to Documentation/process/coding-style.rst, if one branch of a conditional statement needs braces, both branches should use braces. Fixes: bbcf90c0646ac797 ("thermal: Explicitly enable non-changing thermal zone devices") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200819092716.3191-1-geert+renesas@glider.be
2020-10-12thermal: Use kobj_to_dev() instead of container_of()Tian Tao
Use kobj_to_dev() instead of container_of() Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597799671-11530-1-git-send-email-tiantao6@hisilicon.com
2020-10-12thermal: imx8mm: Use dev_err_probe() to simplify error handlingAnson Huang
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597129185-8460-2-git-send-email-Anson.Huang@nxp.com
2020-10-12thermal: imx: Use dev_err_probe() to simplify error handlingAnson Huang
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597129185-8460-1-git-send-email-Anson.Huang@nxp.com
2020-10-12drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"Colin Ian King
There is a spelling mistake in the Kconfig text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200810082739.48007-1-colin.king@canonical.com
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02genetlink: add small version of opsJakub Kicinski
We want to add maxattr and policy back to genl_ops, to enable dumping per command policy to user space. This, however, would cause bloat for all the families with global policies. Introduce smaller version of ops (half the size of genl_ops). Translate these smaller ops into a full blown struct before use in the core. v1: - use struct assignment - put a full copy of the op in struct genl_dumpit_info - s/light/small/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge tag 'thermal-v5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix bogus thermal shutdowns for omap4430 where bogus values resulting from an incorrect ADC conversion are too high and fire an emergency shutdown (Tony Lindgren) - Don't suppress negative temp for qcom spmi as they are valid and userspace needs them (Veera Vegivada) - Fix use-after-free in thermal_zone_device_unregister reported by Kasan (Dmitry Osipenko) * tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Fix use-after-free in thermal_zone_device_unregister() thermal: qcom-spmi-temp-alarm: Don't suppress negative temp thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
2020-09-04thermal: core: Fix use-after-free in thermal_zone_device_unregister()Dmitry Osipenko
The user-after-free bug in thermal_zone_device_unregister() is reported by KASAN. It happens because struct thermal_zone_device is released during of device_unregister() invocation, and hence the "tz" variable shouldn't be touched by thermal_notify_tz_delete(tz->id). Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
2020-09-04thermal: qcom-spmi-temp-alarm: Don't suppress negative tempVeera Vegivada
Currently driver is suppressing the negative temperature readings from the vadc. Consumers of the thermal zones need to read the negative temperature too. Don't suppress the readings. Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver") Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
2020-09-04thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430Tony Lindgren
We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-15Merge tag 'mfd-next-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
2020-08-07thermal: don't make THERMAL_NETLINK 'default y'Linus Torvalds
We just don't do that. "default y" is for things that are needed for compatibility (when an old feature is made unconditional), or for things that are basically part of the infrastructure of a platform. And it can possibly be used for questions that don't enable code on their own, but are used to enable or disable a whole slew of other questions. A new feature that people aren't using is never 'default y', unless it cures cancer or ends world hunger. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-04thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH supportSumeet Pawnikar
Add LP (Low Power) PCH id for Cannon Lake (CNL) based platforms. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1596097503-27924-1-git-send-email-sumeet.r.pawnikar@intel.com
2020-08-03Merge branches 'pm-em' and 'pm-core'Rafael J. Wysocki
* pm-em: OPP: refactor dev_pm_opp_of_register_em() and update related drivers Documentation: power: update Energy Model description PM / EM: change name of em_pd_energy to em_cpu_energy PM / EM: remove em_register_perf_domain PM / EM: add support for other devices than CPUs in Energy Model PM / EM: update callback structure and add device pointer PM / EM: introduce em_dev_register_perf_domain function PM / EM: change naming convention from 'capacity' to 'performance' * pm-core: mmc: jz4740: Use pm_ptr() macro PM: Make *_DEV_PM_OPS macros use __maybe_unused PM: core: introduce pm_ptr() macro
2020-07-31thermal: mediatek: Add tsensor support for V2 thermal systemHenry Yen
This patch adds full support for ver 2 thermal system (e.g., MT7622 SoC). The new changes include reading calibration data, converting temperature and hardware initialization which are specific for version 2 system. Each platform decides which function to call according to its version. Fixes: 3966be3c08c3 ("thermal: mediatek: add support for MT7622 SoC") Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1588238074-19338-3-git-send-email-henry.yen@mediatek.com
2020-07-31thermal: mediatek: Prepare to add support for other platformsHenry Yen
It is known that Mediatek owns two thermal systems, which only differ in the way of reading calibration data and converting temperature. MT8173, MT8183, MT2701 and MT2712 belongs to version 1 thermal system, and MT7622 belongs to version 2. In order to handle both systems, the suffix _V1 is appended to the current code, and then the second patch will add _V2 functions with the same purpose but different implementation. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1588238074-19338-2-git-send-email-henry.yen@mediatek.com
2020-07-30thermal: Update power allocator and devfreq cooling to SPDX licensingLukasz Luba
Update the license to the SPDX licensing format. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200730165117.13998-1-lukasz.luba@arm.com
2020-07-29thermal: core: Add thermal zone enable/disable notificationDaniel Lezcano
Now the calls to enable/disable a thermal zone are centralized in a call to a function, we can add in these the corresponding netlink notifications. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200727231033.26512-1-daniel.lezcano@linaro.org
2020-07-27thermal: qcom: tsens-v0_1: Add support for MSM8939Shawn Guo
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors. Different from its predecessor MSM8916, where 'calib_sel' bits sit in separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and spread on discrete offsets. That's why all qfprom bits are read as one go and later mapped to calibration data for MSM8939. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */ Acked-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
2020-07-24thermal: core: Fix thermal zone lookup by IDThierry Reding
When a thermal zone is looked up by an ID and no zone is found matching that ID, the thermal_zone_get_by_id() function will return a pointer to the thermal zone list head which isn't actually a valid thermal zone. This can lead to a subsequent crash because a valid pointer is returned to the called, but dereferencing that pointer as struct thermal_zone is not safe. Fixes: 329b064fbd13 ("thermal: core: Get thermal zone by id") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200724170105.2705467-1-thierry.reding@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 22:38:11 +0000