summaryrefslogtreecommitdiff
path: root/drivers/thermal/qcom/tsens.h
AgeCommit message (Collapse)Author
2019-05-14drivers: thermal: tsens: Move calibration constants to header fileAmit Kucheria
This will allow calibration routines to correctly include the constants from anywhere and allow more code sharing. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add generic support for TSENS v1 IPAmit Kucheria
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4 of the TSENS IP, functionality for which is encapsulated inside the qcom,tsens-v1 compatible. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharingAmit Kucheria
Just rename the function and move it to allow code sharing with future versions of TSENS IP Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce IP-specific max_sensor countAmit Kucheria
The IP can support 'm' sensors while the platform can enable 'n' sensors of the 'm' where n <= m. Track maximum sensors supported by the IP so that we can correctly track what subset of the sensors are supported on the platform. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: change data type for sensor IDsAmit Kucheria
The IDs cannot be negative, fix the data type. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add new operation to check if a sensor is enabledAmit Kucheria
is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce reg_fields to deal with register descriptionAmit Kucheria
As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code. Define a common set of registers and bit-fields that we care about across the various tsens IP versions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1Amit Kucheria
8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Function prototypes should have argument namesAmit Kucheria
check_patch complains a lot as follows: WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name + int (*init)(struct tsens_priv *); Fix it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_dataAmit Kucheria
Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Document the data structuresAmit Kucheria
Describe how the TSENS device and the various sensors connected to it are described in the driver Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Pass register offsets as private dataAmit Kucheria
Registers have moved around across TSENS generations. For example, the CTRL register was at offset 0x0 in the SROT region on msm8916 but is at offset 0x4 in newer v2 based TSENS HW blocks. Allow passing offsets of important registers so that we can continue to use common functions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Add the SROT address mapAmit Kucheria
On platforms whose device trees specify two address spaces for TSENS, the second one points to the SROT registers. Initialise the SROT map on those platforms. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Rename map field in order to add a second address mapAmit Kucheria
The TSENS driver currently only uses a limited set of registers from the TM address space. So it was ok to map just that set of registers and call it "map". We'd now like to map a second set: SROT registers to introduce new functionality. Rename the "map" field to a more appropriate "tm_map". The 8960 doesn't have a clear split between TM and SROT registers. To avoid complicating the data structure, it will switchover to using tm_map for its maps. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Add SPDX license identifiersAmit Kucheria
The TSENS drivers use a GPL-2.0 license. Replace with equivalent SPDX tags and delete the full license text. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Add generic support for TSENS v2 IPAmit Kucheria
SDM845 uses v2 of the TSENS IP block but the get_temp() function appears to be identical across v2.x.y in code seen so far. We use the generic get_temp() function defined as part of ops_generic_v2. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Add support to split up register address space into twoAmit Kucheria
There are two banks of registers for v2 TSENS IPs: SROT and TM. On older SoCs these were contiguous, leading to DTs mapping them as one register address space of size 0x2000. In newer SoCs, these two banks are not contiguous anymore. Add logic to init_common() to differentiate between old and new DTs and adjust associated offsets for the TM register bank so that the old DTs will continue to function correctly. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Get rid of unused fields in structureAmit Kucheria
status_field and trdy are unused in any of the tsens drivers. Remove them. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rajendra Nayak <rnayak@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8996: Add support for 8996 family of SoCsRajendra Nayak
The TSENS controller in 8996 family of SoCs is capable of converting the ADC code outputs to real temperature values (in decidegree Celsius). It can also be programmed to provide raw ADC code, but the secure software on 8996 programs it to provide real temperatures and also does the needed calibrations. We check the valid bit to ensure valid data is read by the AHB master. And the spec recommends the below algorithm to read data 3 consecutive times, which takes care of the worst case delay taken to propagate the updated data to the register. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8960: Add support for 8960 family of SoCsRajendra Nayak
8960 family of SoCs have the TSENS device as part of GCC, hence the driver probes the virtual child device created by GCC and uses the parent to extract all DT properties and reuses the GCC regmap. Also GCC/TSENS are part of a domain thats not always ON. Hence add .suspend and .resume hooks to save and restore some of the inited register context. Also 8960 family have some of the TSENS init sequence thats required to be done by the HLOS driver (some later versions of TSENS do not export these registers to non-secure world, and hence need these initializations to be done by secure bootloaders) 8660 from the same family has just one sensor and hence some register offset/layout differences which need special handling in the driver. Based on the original code from Siddartha Mohanadoss, Stephen Boyd and Narendran Rajan. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8974: Add support for 8974 family of SoCsRajendra Nayak
Add .calibrate support for 8974 family as part of tsens_ops. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8916: Add support for 8916 family of SoCsRajendra Nayak
Add support to calibrate sensors on 8916 family and also add common functions to read temperature from sensors (This can be reused on other SoCs having similar TSENS device) The calibration data is read from eeprom using the generic nvmem framework apis. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens: Add a skeletal TSENS driversRajendra Nayak
TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:14:27 +0000