summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2016-09-14spi: fsl-espi: improve and simplify interrupt handlerHeiner Kallweit
Simplify the interrupt handler a little. In addition don't call fsl_espi_cpu_irq() if no event bit is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: fsl-espi: simplify fsl_espi_setup_transferHeiner Kallweit
If t is not null then the SPI core takes care that bits_per_word and speed_hz are populated. This allows to simplify fsl_espi_setup_transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: imx: support loopback mode on imx35Martin Kaiser
imx35 and compatible chipsets support loopback mode by setting a loopback control bit in the test register. Make this setting available for data transfers, similar to what we do for imx51. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: imx: set spi_bus_clk for mx1, mx31 and mx35Martin Kaiser
Modify spi_imx_clkdiv_2() to return the resulting bus clock frequency when the selected clock divider is applied. Set spi_imx->spi_bus_clk to this frequency. If spi_bus_clk is unset, spi_imx_calculate_timeout() causes a division by 0. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: bcm-qspi: Add BSPI spi-nor flash controller driverKamal Dasu
This change implements BSPI driver for Broadcom BRCMSTB, NS2, NSP SoCs works in combination with the MSPI controller driver and implements flash read acceleration and implements the spi_flash_read() method. Both MSPI and BSPI controllers are needed to access spi-nor flash. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: brcmstb-qspi: Broadcom settop platform driverKamal Dasu
Adding the settop SoC platfrom driver, this driver is compatible with the settop MSPI+BSPI and MSPI only blocks implemented on the SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: bcm-qspi: Add Broadcom MSPI driverKamal Dasu
Master SPI driver for Broadcom settop, iProc SoCs. The driver is used for devices that use SPI protocol on BRCMSTB, NSP, NS2 SoCs. SoC platform driver call exported porbe(), remove() and suspend/resume pm_ops implemented in this common driver. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIsAxel Lin
devm_* API is supposed to be used only in probe function call. The resource is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to resource leak. Thus avoid using devm_* APIs in .setup/.cleanup callbacks. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: meson: Add GXBB compatibleNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_transHeiner Kallweit
Merge both functions to reduce source code size and improve readability. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: improve message length handlingHeiner Kallweit
Move checking for a zero-length message up in the call chain and use m->frame_length instead of re-calculating the overall length of all transfers in the message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: factor out handling of read dataHeiner Kallweit
Factor out copying read data to the read buffers in the original message to a new function fsl_espi_copy_from_buf. This also allows to simplify fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: centralize populating struct spi_transferHeiner Kallweit
Better structure the code by population all elements of struct spi_transfer in one place. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: factor out initial message checkingHeiner Kallweit
Checking the message is currently done at diffrent places in the driver. Factor it out to fsl_espi_check_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: pxa2xx: Default thresholds to PXA configurationAndy Shevchenko
Most of the devices in the supported list have PXA configuration of FIFO. In particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined for CE4100. Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix definitions by CE4100 and append necessary pieces of code to switch case conditions. We are on safe side since those bits are ignored on all LPSS IPs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: pxa2xx: Remove pointer to chip data from driver dataJarkko Nikula
Transfer state machine in this driver does not need to set/unset pointer to chip data between queueing and finalizing message as it is not actually used as a state info itself but just pointer passing. Since this per SPI device specific chip data is already carried in ctldata use that and remove pointer to chip data from driver data. While at it, group initialized variables before uninitialized variables in pump_transfers(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: pxa2xx: Remove pointer to current SPI message from driver dataJarkko Nikula
There is no need to carry pointer to current SPI message in driver data because cur_msg in struct spi_master holds it already when driver is using the message queueing infrastructure from the SPI core. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: pxa2xx: Do not needlessly initialize stack variablesJarkko Nikula
All of these variables are unconditionally set before their use. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: dw: round up result of calculation for clock dividerMatthias Seidel
Avoid ending up with a higher frequency than requested Signed-off-by: Matthias Seidel <kernel@mseidel.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufsHeiner Kallweit
fsl_espi_bufs and fsl_espi_cpu_bufs are very small that we can merge them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: improve return value handling in fsl_espi_bufsHeiner Kallweit
Return a proper status code from fsl_espi_bufs instead of returning the number of remaining words and let the caller evaluate it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: merge fsl_espi_cmd_trans and fsl_espi_rw_transHeiner Kallweit
fsl_espi_cmd_trans and fsl_espi_rw_trans share most of the code so we can merge them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: eliminate struct fsl_espi_transferHeiner Kallweit
The remaining elements of struct fsl_espi_transfer are part of struct spi_transfer anyway. So we can get rid of struct fsl_espi_transfer and use a struct spi_transfer only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: remove element actual_length from struct fsl_espi_transHeiner Kallweit
If an error occurs during processing the message, then we don't have to populate the actual_length element of struct message. So we can get rid of element actual_length in struct fsl_espi_transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: fix status handling in fsl_espi_do_one_msgHeiner Kallweit
If an error occurred during message handling return this error instead of always returning 0 and align the code with the generic implementation in spi_transfer_one_message. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: remove element status from struct fsl_espi_transferHeiner Kallweit
Use the return values of the functions in the call chain to transport status information instead of using an element in struct fsl_espi_transfer for this. This is more in line with the general approach how to handle status information and is one step further to eventually get rid of struct fsl_espi_transfer completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: factor out filling the local bufferHeiner Kallweit
Better structure the code by factoring out filling the local buffer. In addition don't initialize the complete local buffer at the beginning of fsl_espi_do_one_msg. Instead move initialization of those parts of the local buffer to be used for transfers w/o tx_buf to fsl_espi_copy_to_buf. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: pre-allocate message bufferHeiner Kallweit
Currently the driver allocates a 64kb buffer for each single message. On systems with little and fragmented memory this can result in memory allocation errors. Solve this by pre-allocating a buffer. This patch was developed in OpenWRT long ago, however it never made it upstream. I slightly modified the original patch to re-initialize the buffer at the beginning of each transfer. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', ↵Mark Brown
'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus
2016-09-06spi: fsl-espi: remove unneeded check in fsl_espi_do_transHeiner Kallweit
SPI core takes care that both values are always populated. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06spi: fsl-espi: simplify fsl_espi_setup_transferHeiner Kallweit
Simplify fsl_espi_setup_transfer a little. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06spi: fsl-espi: remove unused elements n_rx and n_tx in struct fsl_espi_transferHeiner Kallweit
Both elements are not used, so remove them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06spi: dw: fix multiple slaves with different baudratesMatthias Seidel
Add current master clock to dws struct and compare it against the requestedtransfer speed. Update clock divider only if necessary. Signed-off-by: Matthias Seidel <kernel@mseidel.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-03spi: Prevent unexpected SPI time out due to arithmetic overflowSien Wu
When reading SPI flash as MTD device, the transfer length is directly passed to the spi driver. If the requested data size exceeds 512KB, it will cause the time out calculation to overflow since transfer length is 32-bit unsigned integer. This issue is resolved by using 64-bit unsigned integer to perform the arithmetic. Signed-off-by: Sien Wu <sien.wu@ni.com> Acked-by: Brad Keryan <brad.keryan@ni.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Brad Mouring <brad.mouring@ni.com> Natinst-ReviewBoard-ID 150232 Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: qup: skip clk_disable_unprepare if the device is already runtime suspendedSudeep Holla
If the spi device is already runtime suspended, if spi_qup_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the a splat from unpreparing a non-prepared clock. This patch fixes the issue by executing clk_disable_unprepare conditionally in spi_qup_suspend. [Reworded commit message to remove irrelevant backtrace -- broonie] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: fsl-espi: remove unneeded variable in fsl_espi_do_transHeiner Kallweit
Creating a message, adding one transfer, and then iterating over all transfers in the message doesn't make sense. We can simply use the original transfer directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: fsl-espi: add missing static declaration to fsl_espi_cpu_irqHeiner Kallweit
Add missing static declaration to fsl_espi_cpu_irq. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: fsl-espi: change return type of fsl_espi_cpu_bufs to voidHeiner Kallweit
fsl_espi_cpu_bufs always returns 0, so change the return type to void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: fsl-espi: change return type of fsl_espi_setup_transfer to voidHeiner Kallweit
fsl_espi_setup_transfer always returns 0, so change the return type to void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: fsl-espi: dont include irq.hHeiner Kallweit
irq.h isn't needed and it even shouldn't be included, see comment at the beginning of this header file. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: loopback-test: mark rx_ranges_cmp() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/spi/spi-loopback-test.c:408:5: warning: no previous prototype for 'rx_ranges_cmp' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: sh-msiof: Use ARCH_SHMOBILE instead of SUPERHGeert Uytterhoeven
"spi_sh_msiof" is used on sh7723 and sh7724 only. As all of the above select ARCH_SHMOBILE, restrict its driver dependencies from SUPERH to ARCH_SHMOBILE. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01spi: sc18is602: Add reset control via gpio pin.Phil Reid
This sc18is602 has a reset pin that may need to be deasserted. Add optional binding to specifiy the reset pin via a gpio and deassert during probe. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-24spi: spi-cavium-thunderx: Add missing clk_disable_unprepare()Wei Yongjun
Add the missing clk_disable_unprepare() before return in the probe error handling case and remove. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-24spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devicesAndy Shevchenko
Slave devices are not enumerated by ACPI data because the ACPI handle for the core driver is NULL if it was enumerated by PCI. Propagate firmware node handle of the PCI device to the platform device. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-22spi: spi-fsl-dspi: Drop extra spi_master_put in device remove functionWei Yongjun
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Fixes: 9298bc727385 ("spi: spi-fsl-dspi: Remove spi-bitbang") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-22spi: spi-fsl-dspi: Check clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-19spi: octeon: Add ThunderX driverJan Glauber
Add ThunderX SPI driver using the shared part from the Octeon driver. The main difference of the ThunderX driver is that it is a PCI device so probing is different. The system clock settings can be specified in device tree. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18spi: spi-txx9: Add missing clock (un)prepare calls for CCFGeert Uytterhoeven
While the custom minimal TXx9 clock implementation doesn't need or use clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE), they are mandatory when using the Common Clock Framework. Hence add them, to prepare for the advent of CCF. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18spi: fsl-espi: eliminate spi nor flash read loopHeiner Kallweit
The fsl-espi driver contains a read loop that implicitely assumes that the device to read from is a m25p80 SPI NOR flash (bytes 2 - 4 of the first write transfer are interpreted as 3 byte flash address). Now that we have such a read loop in the spi-nor driver and are able to correctly indicate the message size limit of the controller, the read loop can be removed from the fsl-espi driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 09:10:45 +0000