| Age | Commit message (Collapse) | Author |
|---|
|
This patch allow the rpmh driver to be loaded as a permenent
module. Meaning it can be loaded from a module, but then cannot
be unloaded.
Ideally, it would include a remove hook and related logic, but
the rpmh driver is fairly core to the system, so once its loaded
with almost anythign else to get the system to go, the dependencies
are not likely to ever also be removed.
So making it a permenent module at least improves things slightly
over requiring it to be a built in driver.
Acked-by: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200326224459.105170-3-john.stultz@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
No need to put node when of_find_compatible_node() failed, return
immediately to simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The RSC_DRV_IRQ_ENABLE, RSC_DRV_IRQ_STATUS, and RSC_DRV_IRQ_CLEAR
registers are not part of TCS 0. Let's not pretend that they are by
using read_tcs_reg() and write_tcs_reg() and passing a bogus tcs_id of
0. We could introduce a new wrapper for these registers but it
wouldn't buy us much. Let's just read/write directly.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.10.I2adf93809c692d0b673e1a86ea97c45644aa8d97@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Auditing tcs_invalidate() made me worried. Specifically I saw that it
used spin_lock(), not spin_lock_irqsave(). That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.
Looking more at it, there is actually no reason for these locks
anyway. Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty. That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns. The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.
At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU. If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.
Continuing to audit tcs_invalidate(), I found a bug. The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS. Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().
I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed. However, I think it's better to just
delete the checks.
As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called. Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too. The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this. When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either. If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The calls rpmh_rsc_write_ctrl_data() and rpmh_rsc_send_data() are only
ever called from rpmh.c. We know that rpmh.c already error checked
the message. There's no reason to do it again in rpmh-rsc.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.8.I8e187cdfb7a31f5bb7724f1f937f2862ee464a35@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
tcs_is_free() had two checks in it: does the software think that the
TCS is free and does the hardware think that the TCS is free. I
couldn't figure out in which case the hardware could think that a TCS
was in-use but software thought it was free. Apparently there is no
case and the extra check can be removed. This apparently has already
been done in a downstream patch.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.7.Icf2213131ea652087f100129359052c83601f8b0@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
I've been pouring through the rpmh-rsc code and trying to understand
it. Document everything to the best of my ability. All documentation
here is strictly from code analysis--no actual knowledge of the
hardware was used. If something is wrong in here I either
misunderstood the code, had a typo, or the code has a bug in it
leading to my incorrect understanding.
In a few places here I have documented things that don't make tons of
sense. A future patch will try to address this. While this means I'm
adding comments / todos and then later fixing them in the series, it
seemed more urgent to get things documented first so that people could
understand the later patches.
Any comments I adjusted I also tried to make match kernel-doc better.
Specifically:
- kernel-doc says do not leave a blank line between the function
description and the arguments
- kernel-doc examples always have things starting w/ a capital and
ending with a period.
This should be a no-op. It's just comment changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.6.I52653eb85d7dc8981ee0dafcd0b6cc0f273e9425@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The "cmd_cache" in RPMH wasn't terribly sensible. Specifically:
- The current code doesn't really detect "conflicts" properly any case
where the sequence being checked has more than one entry. One
simple way to see this in the current code is that if cmd[0].addr
isn't found then cmd[1].addr is never checked.
- The code attempted to use the "cmd_cache" to update an existing
message in a sleep/wake TCS with new data. The goal appeared to be
to update part of a TCS while leaving the rest of the TCS alone. We
never actually do this. We always fully invalidate and re-write
everything.
- If/when we try to optimize things to not fully invalidate / re-write
every time we update the TCSes we'll need to think it through very
carefully. Specifically requirement of find_match() that the new
sequence of addrs must match exactly the old sequence of addrs seems
inflexible. It's also not documented in rpmh_write() and
rpmh_write_batch(). In any case, if we do decide to require updates
to keep the exact same sequence and length then presumably the API
and data structures should be updated to understand groups more
properly. The current algorithm doesn't really keep track of the
length of the old sequence and there are several boundary-condition
bugs because of that. Said another way: if we decide to do
something like this in the future we should start from scratch and
thus find_match() isn't useful to keep around.
This patch isn't quite a no-op. Specifically:
- It should be a slight performance boost of not searching through so
many arrays.
- The old code would have done something useful in one case: it would
allow someone calling rpmh_write() to override the data that came
from rpmh_write_batch(). I don't believe that actually happens in
reality.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.5.I6d3d0a3ec810dc72ff1df3cbf97deefdcdeb8eef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The get_tcs_of_type() function doesn't provide any value. It's not
conceptually difficult to access a value in an array, even if that
value is in a structure and we want a pointer to the value. Having
the function in there makes me feel like it's doing something fancier
like looping or searching. Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.4.Ia348ade7c6ed1d0d952ff2245bc854e5834c8d9a@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
I was trying to write documentation for the functions in rpmh-rsc and
I got to tcs_ctrl_write(). The documentation for the function would
have been: "This is the core of rpmh_rsc_write_ctrl_data(); all the
caller does is error-check and then call this".
Having the error checks in a separate function doesn't help for
anything since:
- There are no other callers that need to bypass the error checks.
- It's less documenting. When I read tcs_ctrl_write() I kept
wondering if I need to handle cases other than ACTIVE_ONLY or cases
with more commands than could fit in a TCS. This is obvious when
the error checks and code are together.
- The function just isn't that long, so there's no problem
understanding the combined function.
Things were even more confusing because the two functions names didn't
make obvious (at least to me) their relationship.
Simplify by folding one function into the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.3.Ie88ce5ccfc0c6055903ccca5286ae28ed3b85ed3@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines. Let's add
a bunch of comments describing which blocks are part of other blocks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.2.Iaddc29b72772e6ea381238a0ee85b82d3903e5f2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This patch makes two changes, both of which should be no-ops:
1. Make read_tcs_reg() / read_tcs_cmd() symmetric to write_tcs_reg() /
write_tcs_cmd().
2. Change the order of operations in the above functions to make it
more obvious to me what the math is doing. Specifically first you
want to find the right TCS, then the right register, and then
multiply by the command ID if necessary.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.1.I1b754137e8089e46cf33fc2ea270734ec3847ec4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.
Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.
Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.
Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add changes to invoke rpmh flush() from CPU PM notification.
This is done when the last the cpu is entering deep CPU idle
states and controller is not busy.
Controllers that have 'HW solver' mode like display RSC do not need
to register for CPU PM notification. They may be in autonomous mode
executing low power mode and do not require rpmh_flush() to happen
from CPU PM notification.
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-5-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
TCSes have previously programmed data when rpmh_flush() is called.
This can cause old data to trigger along with newly flushed.
Fix this by cleaning SLEEP and WAKE TCSes before new data is flushed.
With this there is no need to invoke rpmh_rsc_invalidate() call from
rpmh_invalidate().
Simplify rpmh_invalidate() by moving invalidate_batch() inside.
Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-4-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.
Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.
Fixes: 600513dfeef3 ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The function platform_get_irq() can log an error already. Thus omit a
redundant message for the exception handling in the calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/eb92fcfb-6181-1f9d-2601-61e5231bd892@web.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It's useful for kernel devs to understand what resources and data is
stored inside command db. Add a file in debugufs called 'cmd-db' to dump
the memory contents and strings for resources along with their
addresses. E.g.
Command DB DUMP
Slave ARC (v16.0)
-------------------------
0x00030000: cx.lvl [00 00 10 00 40 00 80 00 c0 00 00 01 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00]
0x00030004: cx.tmr
0x00030010: mx.lvl [00 00 10 00 00 01 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00]
0x00030014: mx.tmr
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200309185704.2491-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Looks like SoC ID is not exported to sysfs for some reason.
This patch adds it!
This is mostly used by userspace libraries like Snapdragon
Neural Processing Engine (SNPE) SDK for checking supported SoC info.
Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200319121418.5180-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In the actual implementation the same compatible string
"mediatek,<chip>-mmsys" is used to bind the clock drivers
(drivers/soc/mediatek) as well as to the gpu driver
(drivers/gpu/drm/mediatek/mtk_drm_drv.c). This ends with the problem
that the only probed driver is the clock driver and there is no display
at all.
In any case having the same compatible string for two drivers is not
correct and should be fixed. To fix this, and maintain backward
compatibility, we can consider that the mmsys driver is the top-level
entry point for the multimedia subsystem, so is not a pure clock
controller but a system controller, and the drm driver is instantiated
by that MMSYS driver.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Provide a mtk_mmsys_ddp_connect() and mtk_mmsys_disconnect() functions to
replace mtk_ddp_add_comp_to_path() and mtk_ddp_remove_comp_from_path().
Those functions will allow DRM driver and others to control the data
path routing.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
There is no strong reason for this to use CLK_OF_DECLARE instead of
being a platform driver. Plus, MMSYS provides clocks but also a shared
register space for the mediatek-drm and the mediatek-mdp
driver. So move the MMSYS clocks to a new platform driver and also
create a new MMSYS platform driver in drivers/soc/mediatek that
instantiates the clock driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:
- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.
- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.
I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"
* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
Add support for the Kendryte K210 RISC-V SoC. For now, this support
only provides a simple sysctl driver allowing to setup the CPU and
uart clock. This support is enabled through the new Kconfig option
SOC_KENDRYTE and defines the config option CONFIG_K210_SYSCTL
to enable the K210 SoC sysctl driver compilation.
The sysctl driver also registers an early SoC initialization function
allowing enabling the general purpose use of the 2MB of SRAM normally
reserved for the SoC AI engine. This initialization function is
automatically called before the dt early initialization using the flat
dt root node compatible property matching the value "kendryte,k210".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Palmer: Add missing endmenu in Kconfig.socs]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.7
DPAA2 DPIO driver performance optimization
- Add and use QMAN multiple enqueue interface
- Use function pointer indirection to replace checks in hotpath
QUICC Engine drivers
- Fix sparse warnings and exposed endian issues
* tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: fsl: dpio: fix dereference of pointer p before null check
soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue
soc: fsl: dpio: QMAN performance improvement with function pointer indirection
soc: fsl: dpio: Adding QMAN multiple enqueue interface
Link: https://lore.kernel.org/r/20200326001257.22696-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/soc
pmic wrapper:
- add support for MT6779 SoC
cmdq-helper:
- set knows_txdone in mailbox client
* tag 'v5.6-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pwrap: add support for MT6359 PMIC
soc: mediatek: pwrap: add pwrap driver for MT6779 SoCs
dt-bindings: pwrap: mediatek: add pwrap support for MT6779
soc: mediatek: knows_txdone needs to be set in Mediatek CMDQ helper
Link: https://lore.kernel.org/r/61165e91-f211-ad37-a81c-cbf3ff69fa1b@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
soc/tegra: Changes for v5.7-rc1
These changes implement various clocks that are controlled by the PMC
and add support for configuring the voltage level of some pins (needed
for example to support high-speed modes on the SD/MMC interfaces).
* tag 'tegra-for-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Cleanup whitespace usage
soc/tegra: pmc: Add pins for Tegra194
soc/tegra: Add support for 32 kHz blink clock
soc/tegra: Add Tegra PMC clocks registration into PMC driver
dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
dt-bindings: phy: tegra-xusb: Add usb-role-switch
dt-bindings: phy: tegra: Add Tegra194 support
dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
dt-bindings: tegra: Convert Tegra PMC bindings to YAML
dt-bindings: clock: tegra: Add IDs for OSC clocks
Link: https://lore.kernel.org/r/20200313165848.2915133-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
PM changes for am335x and am437x for v5.7 merge window
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
* tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE
soc: ti: pm33xx: Add base cpuidle support
ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.7
- Enable ARM global timer on Cortex-A9 MPCore SoCs,
- A minor cleanup.
* tag 'renesas-arm-soc-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: Replace <linux/clk-provider.h> by <linux/of_clk.h>
ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs
Link: https://lore.kernel.org/r/20200226110221.19288-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Correct the probe return value to -ENODEV on non-Exynos platforms.
Link: https://lore.kernel.org/r/20200316175652.5604-4-krzk@kernel.org
Fixes: 02fb29882d5c ("soc: samsung: chipid: Drop "syscon" compatible requirement")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes
NXP/FSL soc driver fixes for v5.6
DPAA2 DPIO
- Fix a kernel hang caused by irq requested before creating dpio
* tag 'soc-fsl-fix-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: dpio: register dpio irq handlers after dpio create
Link: https://lore.kernel.org/r/20200312202525.16708-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.7:
- Update SCU power domain driver to include PD ranges for audio, CM40
I2C and INTMUX, also enlarge PD range for mu_b.
- Remove IMX_SC_RPC_SVC_ABORT from SCU API, as it was added by mistake.
- Increase build test coverage for i.MX8M SoC and IMX_SCU driver.
- Improve i.MX GPC power up sequencing to ensure that the reset is
properly propagated through the peripheral devices in the power
domain.
* tag 'imx-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS
firmware: imx: Remove IMX_SC_RPC_SVC_ABORT
firmware: imx: scu-pd: enlarge PD range for mu_b
firmware: imx: scu-pd: Add missing audio PD ranges
soc: imx: gpcv2: include linux/sizes.h
Link: https://lore.kernel.org/r/20200318051918.32579-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.7
This adds a new library for subscribing to notifications about
protection domains being stated and stopped and the integration of this
with the APR driver. It also contains fixes and cleanups for AOSS
driver, socinfo and rpmh.
* tag 'qcom-drivers-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
soc: qcom: socinfo: Use seq_putc() if possible
drivers: qcom: rpmh-rsc: Use rcuidle tracepoints for rpmh
soc: qcom: Do not depend on ARCH_QCOM for QMI helpers
soc: qcom: aoss: Read back before triggering the IRQ
soc: qcom: aoss: Use wake_up_all() instead of wake_up_interruptible_all()
drivers: qcom: rpmh: remove rpmh_flush export
drivers: qcom: rpmh: fix macro to accept NULL argument
Link: https://lore.kernel.org/r/20200318044236.GD470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: drivers: Amlogic updates for v5.7
- Add secure power domain controller
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
dt-bindings: power: Fix dt_binding_check error
soc: amlogic: fix compile failure with MESON_SECURE_PM_DOMAINS & !MESON_SM
soc: amlogic: Add support for Secure power domains controller
dt-bindings: power: add Amlogic secure power domains bindings
firmware: meson_sm: Add secure power domain support
Link: https://lore.kernel.org/r/7hpndcugoo.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.7
- Miscellaneous fixes and improvements.
* tag 'renesas-drivers-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Remove ARCH_R8A7795
soc: renesas: rcar-sysc: Use the correct style for SPDX License Identifier
Link: https://lore.kernel.org/r/20200226110221.19288-6-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes the following sparse warnings, some of these endian issues are
real issues that need to be fixed.
drivers/soc/fsl/qe/ucc_slow.c:78:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:78:17: expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:78:17: got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:81:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:81:18: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:81:18: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:90:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:90:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:90:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:99:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:99:17: expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:99:17: got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:102:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:102:18: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:102:18: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:111:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:111:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:111:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:172:28: warning: Using plain integer as NULL pointer
drivers/soc/fsl/qe/ucc_slow.c:174:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:175:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:194:23: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:194:23: expected struct ucc_slow_pram *us_pram
drivers/soc/fsl/qe/ucc_slow.c:194:23: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:204:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:204:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:204:9: got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:229:41: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:229:41: expected struct qe_bd *tx_bd
drivers/soc/fsl/qe/ucc_slow.c:229:41: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:232:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:232:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:232:17: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:234:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:234:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:234:17: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:238:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:238:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:238:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:239:9: expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:239:9: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:239:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:239:9: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:242:26: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:242:26: expected struct qe_bd *rx_bd
drivers/soc/fsl/qe/ucc_slow.c:242:26: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:245:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:245:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:245:17: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:247:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:247:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:247:17: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:251:9: expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:251:9: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:251:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:251:9: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:252:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:252:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:252:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:276:39: warning: mixing different enum types:
drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_tx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_rx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:296:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:296:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:296:9: got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:297:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:297:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:297:9: got restricted __be16 *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Not necessary to set to 0 for the kzalloc'ed area so remove these
assignements.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Fixes the following sparse warnings:
drivers/soc/fsl/qe/qe_ic.c:253:32: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:253:32: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:253:32: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:254:26: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:254:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:254:26: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:269:32: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:269:32: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:269:32: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:270:26: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:270:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:270:26: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:341:31: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:341:31: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:341:31: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:357:31: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:357:31: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:357:31: got unsigned int [noderef] [usertype] <asn:2> *regs
drivers/soc/fsl/qe/qe_ic.c:450:26: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/qe_ic.c:450:26: expected restricted __be32 [noderef] [usertype] <asn:2> *base
drivers/soc/fsl/qe/qe_ic.c:450:26: got unsigned int [noderef] [usertype] <asn:2> *regs
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
|
|
Fixes the following sparse warnings:
drivers/soc/fsl/qe/ucc.c:637:20: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc.c:637:20: expected struct qe_mux *qe_mux_reg
drivers/soc/fsl/qe/ucc.c:637:20: got struct qe_mux [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc.c:652:9: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc.c:652:9: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc.c:652:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc.c:652:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc.c:652:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc.c:652:9: got restricted __be32 *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
|
|
Fixes the following sparse warning:
drivers/soc/fsl/qe/qe_common.c:75:48: warning: incorrect type in argument 2 (different base types)
drivers/soc/fsl/qe/qe_common.c:75:48: expected restricted __be32 const [usertype] *addr
drivers/soc/fsl/qe/qe_common.c:75:48: got unsigned int *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
|
|
Fixes the following sparse warnings:
drivers/soc/fsl/qe/qe.c:426:9: warning: cast to restricted __be32
drivers/soc/fsl/qe/qe.c:528:41: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/qe.c:528:41: expected unsigned long long static [addressable] [toplevel] [usertype] extended_modes
drivers/soc/fsl/qe/qe.c:528:41: got restricted __be64 const [usertype] extended_modes
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
QCOM_APR selects QCOM_PDR_HELPERS, which in turn selects
QCOM_QMI_HELPERS, which depends on NET. So ensure that APR's
dependencies are met by making it depend on NET as well.
Fixes: 834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Clang warns:
../drivers/soc/qcom/pdr_interface.c:316:2: warning: variable 'found' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
list_for_each_entry(pds, &pdr->lookups, node) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../include/linux/list.h:624:7: note: expanded from macro
'list_for_each_entry'
&pos->member != (head);
^~~~~~~~~~~~~~~~~~~~~~
../drivers/soc/qcom/pdr_interface.c:325:7: note: uninitialized use
occurs here
if (!found)
^~~~~
../drivers/soc/qcom/pdr_interface.c:316:2: note: remove the condition if
it is always true
list_for_each_entry(pds, &pdr->lookups, node) {
^
../include/linux/list.h:624:7: note: expanded from macro
'list_for_each_entry'
&pos->member != (head);
^
../drivers/soc/qcom/pdr_interface.c:309:12: note: initialize the
variable 'found' to silence this warning
bool found;
^
= 0
1 warning generated.
Initialize found to false to fix this warning.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Link: https://github.com/ClangBuiltLinux/linux/issues/933
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200316204855.15611-1-natechancellor@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
With COMPILE_TEST, there will be build error, because IMX_SCU
might be set to n, so drop COMPILE_TEST.
Suggested-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.
Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The soc-imx8.c driver is actually for i.MX8M family, so rename it
to soc-imx8m.c.
Use CONFIG_SOC_IMX8M as build gate, not CONFIG_ARCH_MXC, to control
whether build this driver, also make it possible for compile test.
Default set it to y for ARCH_MXC && ARM64
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use PDR helper functions to track the protection domains that the apr
services are dependent upon on SDM845 SoC, specifically the "avs/audio"
service running on ADSP Q6.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-4-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
