| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
MSM8998's BWMON counts in megabytes. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531-topic-msm8998-bwmon-v1-1-454f9d550ee5@linaro.org
|
|
Pass to dev_err_probe() PTR_ERR from actual dev_pm_opp_find_bw_floor()
call which failed, instead of previous ret which at this point is 0.
Failure of dev_pm_opp_find_bw_floor() would result in prematurely ending
the probe with success.
Fixes smatch warnings:
drivers/soc/qcom/icc-bwmon.c:776 bwmon_probe() warn: passing zero to 'dev_err_probe'
drivers/soc/qcom/icc-bwmon.c:781 bwmon_probe() warn: passing zero to 'dev_err_probe'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202305131657.76XeHDjF-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230513111747.132532-1-krzysztof.kozlowski@linaro.org
|
|
The BWMON hardware has two sets of registers: one for the monitor itself
and one called "global". It has what seems to be some kind of a head
switch and an interrupt control register. It's usually 0x200 in size.
On fairly recent SoCs (with the starting point seemingly being moving
the OSM programming to the firmware) these two register sets are
contiguous and overlapping, like this (on sm8450):
/* notice how base.start == global_base.start+0x100 */
reg = <0x90b6400 0x300>, <0x90b6300 0x200>;
reg-names = "base", "global_base";
Which led to some confusion and the assumption that since the
"interesting" global registers begin right after global_base+0x100,
there's no need to map two separate regions and one can simply subtract
0x100 from the offsets.
This is however not the case for anything older than SDM845, as the
global region can appear in seemingly random spots on the register map.
Handle the case where the global registers are mapped separately to allow
proper functioning of BWMONv4 on MSM8998 and older. Add specific
compatibles for 845, 8280xp, 7280 and 8550 (all of which use the single
reg space scheme) to keep backwards compatibility with old DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-3-77a050c2fbda@linaro.org
|
|
bwmon->regmap was never used, as the regmap for bwmon is registered
through devres and accessed through bwmon's regmap_field members.
Remove it
Fixes: ec63dcd3c863 ("soc: qcom: icc-bwmon: use regmap and prepare for BWMON v5")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-2-77a050c2fbda@linaro.org
|
|
In some SoCs we have to force clear the counter/irq clear registers as
they are not self clearing after they are written into.
sc7280 seems to be one such SoC, handle this with a quirk flag.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902043511.17130-4-quic_rjendra@quicinc.com
|
|
Add support for sc7280 BWMON instance measuring traffic between LLCC and
memory with the v5 register layout.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902043511.17130-3-quic_rjendra@quicinc.com
|
|
Return value from devm_regmap_field_bulk_alloc() directly
instead of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220823133620.211902-1-cui.jinpeng2@zte.com.cn
|
|
The SDM845 comes with few instances of Bandwidth Monitor. The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).
SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.
Add support for this "LLCC" BWMON. Differences against existing v4 one:
1. No global interrupts.
2. Different register layout.
3. Different shift of interrupt fields.
4. Smaller sampling window.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-10-krzysztof.kozlowski@linaro.org
|
|
BWMON v5 lacks global interrupt registers. Other BWMON versions differ
as well, so add quirks for easier customization of code flow.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-9-krzysztof.kozlowski@linaro.org
|
|
Refactor the code to prepare it for supporting BWMON v5 which comes with
different register layout by:
1. Adding use of MMIO regmap and regmap fields which allows to keep one
code logic with different register maps.
2. The "clear" type registers do not allow reading, therefore regmap
requires using cache with default values.
3. regmap has an effect of introducing barriers after each readl/writel,
which should negligible effect as only few writes were relaxed.
4. Additionally usage of regmap fields removes need of shifting the
register values.
5. Add "V4" prefix to names of all defines with register addresses (so
BWMON_V4_xxx) to differentiate it from V5. The actual register values
are shared so keep their naming.
6. While changing the defines, pad register addresses to three digits
for readability.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-8-krzysztof.kozlowski@linaro.org
|
|
Versions v4 and v5 of BWMON on SDM845 use different unit count, so allow
easier variant customization by storing its value in struct
icc_bwmon_data.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-7-krzysztof.kozlowski@linaro.org
|
|
The hardware programming guide recommends to clear all registers on
first initialization, through separate field in BWMON_CLEAR register.
This makes sense in general but especially if driver is rebound to avoid
spurious/early interrupts.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-6-krzysztof.kozlowski@linaro.org
|
|
Instead of copying pieces of variant-specific data (struct
icc_bwmon_data) into the state container (struct icc_bwmon), just store
a pointer to it.
This simplifies a bit the code and allows later to grow easily the
variant-specific data for new BWMON v5.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-5-krzysztof.kozlowski@linaro.org
|
|
BWMON_GLOBAL_IRQ_STATUS and BWMON_ZONE_COUNT defines are not used.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-4-krzysztof.kozlowski@linaro.org
|
|
The interrupt enable, status and clear registers have the same layout,
so BWMON_GLOBAL_IRQ_ENABLE_ENABLE define can be used also for clearing
IRQ, instead of hard-coded value.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-3-krzysztof.kozlowski@linaro.org
|
|
Eliminate the follow coccicheck warning:
./drivers/soc/qcom/icc-bwmon.c:349:2-9: line 349 is redundant because platform_get_irq() already prints an error
Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714075532.104665-1-yang.lee@linux.alibaba.com
|
|
Bandwidth monitoring (BWMON) sits between various subsytems like CPU,
GPU, Last Level caches and memory subsystem. The BWMON can be
configured to monitor the data throuhput between memory and other
subsytems. The throughput is measured within specified sampling window
and is used to vote for corresponding interconnect bandwidth.
Current implementation brings support for BWMON v4, used for example on
SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
The driver was tested on SDM845.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
|
