summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2025-04-21scsi: hisi_sas: Wait until error handling is completeYihang Li
SATA devices are lost when FLR is performed while the controller and disks are in suspended state. This is because the libata layer is called to initialize the SATA device during controller resume. If FLR is executed at this time, the IDENTIFY command fails. As a result, the revalidate fails, and the SATA device is disabled by the libata layer. Wait until error handling completes. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20250414080845.1220997-5-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: hisi_sas: Call I_T_nexus after soft reset for SATA diskYihang Li
In commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure"), if the softreset fails upon certain conditions, the PHY connected to the disk is disabled directly. Manual recovery is required, which is inconvenient for users in actual use. In addition, SATA disks do not support simultaneous connection of multiple hosts. Therefore, when multiple controllers are connected to a SATA disk at the same time, the controller which is connected later failed to issue an ATA softreset to the SATA disk. As a result, the PHY associated with the disk is disabled and cannot be automatically recovered. Now that, we will not focus on the execution result of softreset. No matter whether the execution is successful or not, we will directly carry out I_T_nexus_reset. Fixes: 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure") Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20250414080845.1220997-4-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: hisi_sas: Coding style cleanupYihang Li
Remove superfluous blank lines and symbols. Add spaces around operators. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20250414080845.1220997-3-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: hisi_sas: Use macro instead of magic numberYihang Li
The hisi_sas driver has a large number of magic numbers which makes for unfriendly code reading. Use macro definitions instead. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20250414080845.1220997-2-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: mpi3mr: Fix typo and grammarChelsy Ratnawat
Corrected grammar, spelling, and formatting in the kernel-doc comment for mpi3mr_os_handle_events() to follow kernel-doc style and improve clarity. Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com> Link: https://lore.kernel.org/r/20250419225906.31437-1-chelsyratnawat2001@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: mpi3mr: Add level check to control event loggingRanjan Kumar
Ensure event logs are only generated when the debug logging level MPI3_DEBUG_EVENT is enabled. This prevents unnecessary logging. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250415101546.204018-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: scsi_transport_fc: Rename del_timer() in commentWangYuli
Commit 8fa7292fee5c ("treewide: Switch/rename to timer_delete[_sync]()") switched del_timer() to timer_delete(), but did not modify the comment for fc_remote_port_rolechg(). Fix it. Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI SUBSYSTEM <linux-scsi@vger.kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://lore.kernel.org/r/084BD6AB1C4759DA+20250414042629.63019-3-wangyuli@uniontech.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-21scsi: core: Clear flags for scsi_cmnd that did not completeAnastasia Kovaleva
Commands that have not been completed with scsi_done() do not clear the SCMD_INITIALIZED flag and therefore will not be properly reinitialized. Thus, the next time the scsi_cmnd structure is used, the command may fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc value: kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s Clear flags for commands that have not been completed by SCSI. Fixes: 4abafdc4360d ("block: remove the initialize_rq_fn blk_mq_ops method") Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: pm80xx: Add __nonstring annotations for unterminated stringsKees Cook
When a character array without a terminating NUL character has a static initializer, GCC 15's -Wunterminated-string-initialization will only warn if the array lacks the "nonstring" attribute[1]. Mark the arrays with __nonstring to and correctly identify the char array as "not a C string" and thereby eliminate the warning. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1] Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250310222553.work.437-kees@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: mpi3mr: Reset the pending interrupt flagRanjan Kumar
If an admin interrupt is missed, admin_pend_isr may stay set and trigger admin reply processing even when no admin I/Os are pending. Clearing/Resetting it in the admin completion path prevents this. Fixes: ca41929b2ed5 ("scsi: mpi3mr: Check admin reply queue from Watchdog") Cc: stable@vger.kernel.org Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250411111419.135485-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: mpi3mr: Fix pending I/O counterRanjan Kumar
Commit 199510e33dea ("scsi: mpi3mr: Update consumer index of reply queues after every 100 replies") introduced a regression with the per-reply queue pending I/O counter which was erroneously decremented, leading to the counter going negative. Drop the incorrect atomic decrement for the pending I/O counter. Fixes: 199510e33dea ("scsi: mpi3mr: Update consumer index of reply queues after every 100 replies") Cc: stable@vger.kernel.org Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250411111419.135485-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: lpfc: Use memcpy() for BIOS versionDaniel Wagner
The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string. Signed-off-by: Daniel Wagner <wagi@kernel.org> Link: https://lore.kernel.org/r/20250409-fix-lpfc-bios-str-v1-1-05dac9e51e13@kernel.org Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: elx: sli4: Replace deprecated strncpy() with strscpy()Thorsten Blum
strncpy() is deprecated for NUL-terminated destination buffers; use strscpy() instead. Since sli_config_cmd_init() already zeroes out the destination buffers, the potential NUL-padding by strncpy() is unnecessary. strscpy() copies only the required characters and guarantees NUL-termination. And since all three destination buffers have a fixed length, strscpy() automatically determines their size using sizeof() when the argument is omitted. This makes any explicit sizeof() calls unnecessary. The source strings are also NUL-terminated and meet the __must_be_cstr() requirement of strscpy(). No functional changes intended. Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250408102843.804083-2-thorsten.blum@linux.dev Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: scsi_debug: Add ERASE for tapesKai Mäkisara
The command ERASE(6) for tape devices is added. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250310155557.2872-6-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: scsi_debug: Use scsi_device->type instead os sdebug_ptype where possibleKai Mäkisara
Devices of several types can be created for a single host. The module device type should be used only when the devices are created. Scsi_scan sets the device type initially to 0xff and sets the correct type based in Inquiry results. This means that Inquiry must report sdebug_ptype as long as scsi_device->type is not set (the limit 32 comes from the 5-bit length of the Peripheral Device Type in Inquiry). Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250310155557.2872-5-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: scsi_debug: Move some tape-specific commands to separate definitionsKai Mäkisara
New definitions (struct opcode_info_t) are created for READ(6), WRITE(6), READ POSITION(10) for tape devices. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250310155557.2872-4-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: scsi_debug: Enable different command definitions for different device ↵Kai Mäkisara
types Add mask field devsel to the struct opcode_info_t to enable different definitions for different device types. Add checking of device mask to command queuing and reporting of supported opcodes. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250310155557.2872-3-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-11scsi: scsi_debug: Fix two typos in command definitionsKai Mäkisara
Fix two command definitions: - Flags and service action reversed in SEND DIAGNOSTIC - ATOMIC WRITE missing opcode Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250310155557.2872-2-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-08Merge branch '6.15/scsi-queue' into 6.15/scsi-fixesMartin K. Petersen
Pull in remaining fixes from 6.15/scsi-queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-03scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1Chandrakanth Patil
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Link: https://lore.kernel.org/r/20250402193735.5098-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03scsi: megaraid_sas: Block zero-length ATA VPD inquiryChandrakanth Patil
A firmware bug was observed where ATA VPD inquiry commands with a zero-length data payload were not handled and failed with a non-standard status code of 0xf0. Avoid sending ATA VPD inquiry commands without data payload by setting the device no_vpd_size flag to 1. In addition, if the firmware returns a status code of 0xf0, set scsi_cmnd->result to CHECK_CONDITION to facilitate proper error handling. Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250402193735.5098-1-chandrakanth.patil@broadcom.com Tested-by: Ryan Lahfa <ryan@lahfa.xyz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03scsi: scsi_transport_srp: Replace min/max nesting with clamp()Li Haoran
This patch replaces min(a, max(b, c)) by clamp(val, lo, hi) in the SRP transport layer. The clamp() macro explicitly expresses the intent of constraining a value within bounds, improving code readability. Signed-off-by: Li Haoran <li.haoran7@zte.com.cn> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn> Link: https://lore.kernel.org/r/202503311555115618U8Md16mKpRYOIy2TOmB6@zte.com.cn Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03scsi: smartpqi: Use is_kdump_kernel() to check for kdumpMartin Wilck
The smartpqi driver checks the reset_devices variable to determine whether special adjustments need to be made for kdump. This has the effect that after a regular kexec reboot, some driver parameters such as max_transfer_size are much lower than usual. More importantly, kexec reboot tests have revealed memory corruption caused by the driver log being written to system memory after a kexec. Fix this by testing is_kdump_kernel() rather than reset_devices where appropriate. Fixes: 058311b72f54 ("scsi: smartpqi: Add fw log to kdump") Signed-off-by: Martin Wilck <mwilck@suse.com> Link: https://lore.kernel.org/r/20250321223319.109250-1-mwilck@suse.com Cc: Randy Wright <rwright@hpe.com> Acked-by: Don Brace <don.brace@microchip.com> Tested-by: Don Brace <don.brace@microchip.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03scsi: pm80xx: Set phy_attached to zero when device is goneIgor Pylypiv
When a fatal error occurs, a phy down event may not be received to set phy->phy_attached to zero. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03scsi: iscsi: Fix missing scsi_host_put() in error pathMiaoqian Lin
Add goto to ensure scsi_host_put() is called in all error paths of iscsi_set_host_param() function. This fixes a potential memory leak when strlen() check fails. Fixes: ce51c8170084 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-26Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ...
2025-03-26Merge tag 'for-6.15/block-20250322' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - Fixes for integrity handling - NVMe pull request via Keith: - Secure concatenation for TCP transport (Hannes) - Multipath sysfs visibility (Nilay) - Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li) - Correct use of 64-bit BARs for pci-epf target (Niklas) - Socket fix for selinux when used in containers (Peijie) - MD pull request via Yu: - fix recovery can preempt resync (Li Nan) - fix md-bitmap IO limit (Su Yue) - fix raid10 discard with REQ_NOWAIT (Xiao Ni) - fix raid1 memory leak (Zheng Qixing) - fix mddev uaf (Yu Kuai) - fix raid1,raid10 IO flags (Yu Kuai) - some refactor and cleanup (Yu Kuai) - Series cleaning up and fixing bugs in the bad block handling code - Improve support for write failure simulation in null_blk - Various lock ordering fixes - Fixes for locking for debugfs attributes - Various ublk related fixes and improvements - Cleanups for blk-rq-qos wait handling - blk-throttle fixes - Fixes for loop dio and sync handling - Fixes and cleanups for the auto-PI code - Block side support for hardware encryption keys in blk-crypto - Various cleanups and fixes * tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits) nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi) nvme-tcp: fix selinux denied when calling sock_sendmsg nvmet: pci-epf: Always configure BAR0 as 64-bit nvmet: Remove duplicate uuid_copy nvme: zns: Simplify nvme_zone_parse_entry() nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls nvmet-fc: Remove unused functions nvme-pci: remove stale comment nvme-fc: Utilise min3() to simplify queue count calculation nvme-multipath: Add visibility for queue-depth io-policy nvme-multipath: Add visibility for numa io-policy nvme-multipath: Add visibility for round-robin io-policy nvmet: add tls_concat and tls_key debugfs entries nvmet-tcp: support secure channel concatenation nvmet: Add 'sq' argument to alloc_ctrl_args nvme-fabrics: reset admin connection for secure concatenation nvme-tcp: request secure channel concatenation nvme-keyring: add nvme_tls_psk_refresh() nvme: add nvme_auth_derive_tls_psk() nvme: add nvme_auth_generate_digest() ...
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-24Merge tag 'bitmap-for-6.15' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - cpumask_next_wrap() rework (me) - GENMASK() simplification (I Hsin) - rust bindings for cpumasks (Viresh and me) - scattered cleanups (Andy, Tamir, Vincent, Ignacio and Joel) * tag 'bitmap-for-6.15' of https://github.com/norov/linux: (22 commits) cpumask: align text in comment riscv: fix test_and_{set,clear}_bit ordering documentation treewide: fix typo 'unsigned __init128' -> 'unsigned __int128' MAINTAINERS: add rust bindings entry for bitmap API rust: Add cpumask helpers uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)" cpumask: drop cpumask_next_wrap_old() PCI: hv: Switch hv_compose_multi_msi_req_get_cpu() to using cpumask_next_wrap() scsi: lpfc: rework lpfc_next_{online,present}_cpu() scsi: lpfc: switch lpfc_irq_rebalance() to using cpumask_next_wrap() s390: switch stop_machine_yield() to using cpumask_next_wrap() padata: switch padata_find_next() to using cpumask_next_wrap() cpumask: use cpumask_next_wrap() where appropriate cpumask: re-introduce cpumask_next{,_and}_wrap() cpumask: deprecate cpumask_next_wrap() powerpc/xmon: simplify xmon_batch_next_cpu() ibmvnic: simplify ibmvnic_set_queue_affinity() virtio_net: simplify virtnet_set_affinity() objpool: rework objpool_pop() cpumask: add for_each_{possible,online}_cpu_wrap ...
2025-03-24Merge tag 'hardening-v6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "As usual, it's scattered changes all over. Patches touching things outside of our traditional areas in the tree have been Acked by maintainers or were trivial changes: - loadpin: remove unsupported MODULE_COMPRESS_NONE (Arulpandiyan Vadivel) - samples/check-exec: Fix script name (Mickaël Salaün) - yama: remove needless locking in yama_task_prctl() (Oleg Nesterov) - lib/string_choices: Sort by function name (R Sundar) - hardening: Allow default HARDENED_USERCOPY to be set at compile time (Mel Gorman) - uaccess: Split out compile-time checks into ucopysize.h - kbuild: clang: Support building UM with SUBARCH=i386 - x86: Enable i386 FORTIFY_SOURCE on Clang 16+ - ubsan/overflow: Rework integer overflow sanitizer option - Add missing __nonstring annotations for callers of memtostr*()/strtomem*() - Add __must_be_noncstr() and have memtostr*()/strtomem*() check for it - Introduce __nonstring_array for silencing future GCC 15 warnings" * tag 'hardening-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) compiler_types: Introduce __nonstring_array hardening: Enable i386 FORTIFY_SOURCE on Clang 16+ x86/build: Remove -ffreestanding on i386 with GCC ubsan/overflow: Enable ignorelist parsing and add type filter ubsan/overflow: Enable pattern exclusions ubsan/overflow: Rework integer overflow sanitizer option to turn on everything samples/check-exec: Fix script name yama: don't abuse rcu_read_lock/get_task_struct in yama_task_prctl() kbuild: clang: Support building UM with SUBARCH=i386 loadpin: remove MODULE_COMPRESS_NONE as it is no longer supported lib/string_choices: Rearrange functions in sorted order string.h: Validate memtostr*()/strtomem*() arguments more carefully compiler.h: Introduce __must_be_noncstr() nilfs2: Mark on-disk strings as nonstring uapi: stddef.h: Introduce __kernel_nonstring x86/tdx: Mark message.bytes as nonstring string: kunit: Mark nonstring test strings as __nonstring scsi: qla2xxx: Mark device strings as nonstring scsi: mpt3sas: Mark device strings as nonstring scsi: mpi3mr: Mark device strings as nonstring ...
2025-03-20scsi: hisi_sas: Fix I/O errors caused by hardware port ID changesXingui Yang
The hw port ID of phy may change when inserting disks in batches, causing the port ID in hisi_sas_port and itct to be inconsistent with the hardware, resulting in I/O errors. The solution is to set the device state to gone to intercept I/O sent to the device, and then execute linkreset to discard and find the disk to re-update its information. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20250312095135.3048379-3-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-20scsi: hisi_sas: Enable force phy when SATA disk directly connectedXingui Yang
when a SATA disk is directly connected the SAS controller determines the disk to which I/Os are delivered based on the port ID in the DQ entry. When many phys are disconnected and reconnect, the port ID of phys were changed and used by other link, resulting in I/O being sent to incorrect disk. Data inconsistency on the SATA disk may occur during I/O retries using the old port ID. So enable force phy, then force the command to be executed in a certain phy, and if the actual phy ID of the port does not match the phy configured in the command, the chip will stop delivering the I/O to disk. Fixes: ce60689e12dd ("scsi: hisi_sas: add v3 code to send ATA frame") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20250312095135.3048379-2-yangxingui@huawei.com Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: st: Tighten the page format heuristics with MODE SELECTKai Mäkisara
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did not correctly implement it. The st driver first tries MODE SELECT with the page format bit set to set the block descriptor. If not successful, the non-page format is tried. The test only tests the sense code and this triggers also from illegal parameter in the parameter list. The test is limited to "old" devices and made more strict to remove false alarms. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250311112516.5548-4-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: st: ERASE does not change tape locationKai Mäkisara
The SCSI ERASE command erases from the current position onwards. Don't clear the position variables. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250311112516.5548-3-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: st: Fix array overflow in st_setup()Kai Mäkisara
Change the array size to follow parms size instead of a fixed value. Reported-by: Chenyuan Yang <chenyuan0y@gmail.com> Closes: https://lore.kernel.org/linux-scsi/CALGdzuoubbra4xKOJcsyThdk5Y1BrAmZs==wbqjbkAgmKS39Aw@mail.gmail.com/ Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250311112516.5548-2-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flagEwan D. Milne
Commit 32566a6f1ae5 ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist structure") introduced a regression with SLI-3 adapters (e.g. LPe12000 8Gb) where a Link Down / Link Up such as caused by disabling an host FC switch port would result in the devices remaining in the transport-offline state and multipath reporting them as failed. This problem was not seen with newer SLI-4 adapters. The problem was caused by portions of the patch which removed the functions __lpfc_sli_rpi_release() and lpfc_sli_rpi_release() and all their callers. This was presumably because with the removal of the NLP_RELEASE_RPI flag there was no need to free the rpi. However, __lpfc_sli_rpi_release() and lpfc_sli_rpi_release() which calls it reset the NLP_UNREG_INP flag. And, lpfc_sli_def_mbox_cmpl() has a path where __lpfc_sli_rpi_release() was called in a particular case where NLP_UNREG_INP was not otherwise cleared because of other conditions. Restoring the else clause of this conditional and simply clearing the NLP_UNREG_INP flag appears to resolve the problem with SLI-3 adapters. It should be noted that the code path in question is not specific to SLI-3, but there are other SLI-4 code paths which may have masked the issue. Fixes: 32566a6f1ae5 ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist structure") Cc: stable@vger.kernel.org Tested-by: Marco Patalano <mpatalan@redhat.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Link: https://lore.kernel.org/r/20250317163731.356873-1-emilne@redhat.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: hisi_sas: Fixed failure to issue vendor specific commandsXingui Yang
At present, we determine the protocol through the cmd type, but other cmd types, such as vendor-specific commands, default to the PIO protocol. This strategy often causes the execution of different vendor-specific commands to fail. In fact, for these commands, a better way is to use the protocol configured by the command's tf to determine its protocol. Fixes: 6f2ff1a1311e ("hisi_sas: add v2 path to send ATA command") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20250220090011.313848-1-liyihang9@huawei.com Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: fnic: Remove unnecessary NUL-terminationsThorsten Blum
strscpy_pad() already NUL-terminates 'data' at the corresponding indexes. Remove any unnecessary NUL-terminations. No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250314221626.43174-2-thorsten.blum@linux.dev Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-17scsi: fnic: Remove redundant flush_workqueue() callsChen Ni
destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20250312074320.1430175-1-nichen@iscas.ac.cn Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-13block: remove unused parameter 'q' parameter in __blk_rq_map_sg()Anuj Gupta
request_queue param is no longer used by blk_rq_map_sg and __blk_rq_map_sg. Remove it. Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250313035322.243239-1-anuj20.g@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-10scsi: core: Use a switch statement when attaching VPD pagesChaohai Chen
The original code used if statements to update discovered VPD pages when found. This had the side-effect of not breaking the loop when a page was found. Use an idiomatic switch statement instead. Signed-off-by: Chaohai Chen <wdhh6@aliyun.com> Link: https://lore.kernel.org/r/20250226065802.234144-1-wdhh6@aliyun.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-10scsi: mpi3mr: Task Abort EH SupportChandrakanth Patil
Add Task Abort support to handle SCSI command timeouts, ensuring recovery and cleanup of timed-out commands. This completes the error handling framework for mpi3mr driver, which already includes device reset, target reset, bus reset, and host reset. Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Link: https://lore.kernel.org/r/20250304191453.12994-1-chandrakanth.patil@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-10scsi: storvsc: Don't report the host packet status as the hv statusRoman Kisel
The log statement reports the packet status code as the hv status code which causes confusion when debugging as "hv" might refer to a hypervisor, and sometimes to the host part of the Hyper-V virtualization stack. Fix the name of the datum being logged to clearly indicate the component reporting the error. Also log it in hexadecimal everywhere for consistency. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/20250304000940.9557-2-romank@linux.microsoft.com Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-10scsi: isci: Make most module parameters staticDr. David Alan Gilbert
Most of the module parameters are only used locally in the same C file; so static them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250309145044.38586-1-linux@treblig.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-10scsi: megaraid_sas: Make most module parameters staticDr. David Alan Gilbert
Most of the module parameters are only used locally in the same C file; so static them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250309143348.32896-1-linux@treblig.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-03scsi: fnic: Remove unnecessary spinlock locking and unlockingKaran Tilak Kumar
Remove unnecessary locking and unlocking of spinlock in fdls_schedule_oxid_free_retry_work(). This will shorten the time in the critical section. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250301013712.3115-2-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-03scsi: fnic: Replace fnic->lock_flags with local flagsKaran Tilak Kumar
Replace fnic->lock_flags with local variable for usage with spinlocks in fdls_schedule_oxid_free_retry_work(). Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250301013712.3115-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-03scsi: fnic: Replace use of sizeof with standard usageKaran Tilak Kumar
Remove cast and replace use of sizeof(struct) with standard usage of sizeof. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250225215056.4899-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-03-03scsi: fnic: Fix indentation and remove unnecessary parenthesisKaran Tilak Kumar
Fix indentation in fdls_disc.c to fix kernel test robot warnings. Remove unnecessary parentheses to fix checkpatch check. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202502141403.1PcpwyJp-lkp@intel.com/ Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202502141403.1PcpwyJp-lkp@intel.com/ Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250225215013.4875-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 11:04:21 +0000