summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2024-09-12scsi: pm80xx: Set phy->enable_completion only when we wait for itIgor Pylypiv
[ Upstream commit e4f949ef1516c0d74745ee54a0f4882c1f6c7aea ] pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Terrence Adams <tadamsjr@google.com> Link: https://lore.kernel.org/r/20240627155924.2361370-2-tadamsjr@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: aacraid: Fix double-free on probe failureBen Hutchings
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ] aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com> Link: https://bugs.debian.org/1075855 Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support") Signed-off-by: Ben Hutchings <benh@debian.org> Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progressYihang Li
commit 4f9eedfa27ae5806ed10906bcceee7bae49c8941 upstream. If formatting a suspended disk (such as formatting with different DIF type), the disk will be resuming first, and then the format command will submit to the disk through SG_IO ioctl. When the disk is processing the format command, the system does not submit other commands to the disk. Therefore, the system attempts to suspend the disk again and sends the SYNCHRONIZE CACHE command. However, the SYNCHRONIZE CACHE command will fail because the disk is in the formatting process. This will cause the runtime_status of the disk to error and it is difficult for user to recover it. Error info like: [ 669.925325] sd 6:0:6:0: [sdg] Synchronizing SCSI cache [ 670.202371] sd 6:0:6:0: [sdg] Synchronize Cache(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK [ 670.216300] sd 6:0:6:0: [sdg] Sense Key : 0x2 [current] [ 670.221860] sd 6:0:6:0: [sdg] ASC=0x4 ASCQ=0x4 To solve the issue, ignore the error and return success/0 when format is in progress. Cc: stable@vger.kernel.org Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240819090934.2130592-1-liyihang9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29scsi: lpfc: Initialize status local variable in lpfc_sli4_repost_sgl_list()Justin Tee
[ Upstream commit 3d0f9342ae200aa1ddc4d6e7a573c6f8f068d994 ] A static code analyzer tool indicates that the local variable called status in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage uninitialized values in the routine's log message. Fix by initializing to zero. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-2-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29scsi: spi: Fix sshdr useMike Christie
[ Upstream commit 0b149cee836aa53989ea089af1cb9d90d7c6ac9e ] If scsi_execute_cmd returns < 0, it doesn't initialize the sshdr, so we shouldn't access the sshdr. If it returns 0, then the cmd executed successfully, so there is no need to check the sshdr. This has us access the sshdr when we get a return value > 0. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20231004210013.5601-7-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONESDamien Le Moal
commit 1abc900ddda8ad2ef739fedf498d415655b6c3b8 upstream. Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT ZONES command reply buffer from ATA-ZAC devices by directly accessing the buffer in the host memory. This does not respect the default command DMA direction and causes IOMMU page faults on architectures with an IOMMU enforcing write-only mappings for DMA_FROM_DEVICE DMA direction (e.g. AMD hosts), leading to the device capacity to be dropped to 0: scsi 18:0:58:0: Direct-Access-ZBC ATA WDC WSH722626AL W930 PQ: 0 ANSI: 7 scsi 18:0:58:0: Power-on or device reset occurred sd 18:0:58:0: Attached scsi generic sg9 type 20 sd 18:0:58:0: [sdj] Host-managed zoned block device mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c400 flags=0x0050] mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c500 flags=0x0050] sd 18:0:58:0: [sdj] REPORT ZONES start lba 0 failed sd 18:0:58:0: [sdj] REPORT ZONES: Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK sd 18:0:58:0: [sdj] 0 4096-byte logical blocks: (0 B/0 B) sd 18:0:58:0: [sdj] Write Protect is off sd 18:0:58:0: [sdj] Mode Sense: 6b 00 10 08 sd 18:0:58:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 18:0:58:0: [sdj] Attached SCSI disk Avoid this issue by always mapping the buffer of REPORT ZONES commands using DMA_BIDIRECTIONAL, that is, using a read-write IOMMU mapping. Suggested-by: Christoph Hellwig <hch@lst.de> Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240719073913.179559-2-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONESDamien Le Moal
commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 upstream. Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT ZONES command reply buffer from ATA-ZAC devices by directly accessing the buffer in the host memory. This does not respect the default command DMA direction and causes IOMMU page faults on architectures with an IOMMU enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD hosts). scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6 scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11) scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0) scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0) scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) sd 18:0:0:0: Attached scsi generic sg2 type 20 sd 18:0:0:0: [sdc] Host-managed zoned block device mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050] mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset. mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready mpt3sas_cm0: fault_state(0x2666)! mpt3sas_cm0: sending diag reset !! mpt3sas_cm0: diag reset: SUCCESS sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B) Avoid such issue by always mapping the buffer of REPORT ZONES commands using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by introducing the helper function _base_scsi_dma_map() and using this helper in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling directly scsi_dma_map(). Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03minmax: scsi: fix mis-use of 'clamp()' in sr.cLinus Torvalds
commit 9f499b8c791d2983c0a31a543c51d1b2f15e8755 upstream. While working on simplifying the minmax functions, and avoiding excessive macro expansion, it turns out that the sr.c use of the 'clamp()' macro has the arguments the wrong way around. The clamp logic is val = clamp(in, low, high); and it returns the input clamped to the low/high limits. But sr.c ddid speed = clamp(0, speed, 0xffff / 177); which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends up being nonsensical. Happily, I don't think anybody ever cared. Fixes: 9fad9d560af5 ("scsi: sr: Fix unintentional arithmetic wraparound") Cc: Justin Stitt <justinstitt@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: validate nvme_local_port correctlyNilesh Javali
commit eb1d4ce2609584eeb7694866f34d4b213caa3af9 upstream. The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port. Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Complete command early within lockShreyas Deodhar
commit 4475afa2646d3fec176fc4d011d3879b26cb26e3 upstream. A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition. Fixes: 0367076b0817 ("scsi: qla2xxx: Perform lockless command completion in abort path") Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix flash read failureQuinn Tran
commit 29e222085d8907ccff18ecd931bdd4c6b1f11b92 upstream. Link up failure is observed as a result of flash read failure. Current code does not check flash read return code where it relies on FW checksum to detect the problem. Add check of flash read failure to detect the problem sooner. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/202406210815.rPDRDMBi-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Reduce fabric scan duplicate codeQuinn Tran
commit beafd692461443e0fb1d61aa56886bf85ef6f5e4 upstream. For fabric scan, current code uses switch scan opcode and flags as the method to iterate through different commands to carry out the process. This makes it hard to read. This patch convert those opcode and flags into steps. In addition, this help reduce some duplicate code. Consolidate routines that handle GPNFT & GNNFT. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Use QP lock to search for bsgQuinn Tran
commit c449b4198701d828e40d60a2abd30970b74a1d75 upstream. On bsg timeout, hardware_lock is used as part of search for the srb. Instead, qpair lock should be used to iterate through different qpair. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix for possible memory corruptionShreyas Deodhar
commit c03d740152f78e86945a75b2ad541bf972fab92a upstream. Init Control Block is dereferenced incorrectly. Correctly dereference ICB Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Unable to act on RSCN for port onlineQuinn Tran
commit c3d98b12eef8db436e32f1a8c5478be57dc15621 upstream. The device does not come online when the target port is online. There were multiple RSCNs indicating multiple devices were affected. Driver is in the process of finishing a fabric scan. A new RSCN (device up) arrived at the tail end of the last fabric scan. Driver mistakenly thinks the new RSCN is being taken care of by the previous fabric scan, where this notification is cleared and not acted on. The laser needs to be blinked again to get the device to show up. To prevent driver from accidentally clearing the RSCN notification, each RSCN is given a generation value. A fabric scan will scan for that generation(s). Any new RSCN arrive after the scan start will have a new generation value. This will trigger another scan to get latest data. The RSCN notification flag will be cleared when the scan is associate to that generation. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406210538.w875N70K-lkp@intel.com/ Fixes: bb2ca6b3f09a ("scsi: qla2xxx: Relogin during fabric disturbance") Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: During vport delete send async logout explicitlyManish Rangankar
commit 76f480d7c717368f29a3870f7d64471ce0ff8fb2 upstream. During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete. Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: lpfc: Allow DEVICE_RECOVERY mode after RSCN receipt if in PRLI_ISSUE stateJustin Tee
commit 9609385dd91b26751019b22ca9bfa4bec7602ae1 upstream. Certain vendor specific targets initially register with the fabric as an initiator function first and then re-register as a target function afterwards. The timing of the target function re-registration can cause a race condition such that the driver is stuck assuming the remote port as an initiator function and never discovers the target's hosted LUNs. Expand the nlp_state qualifier to also include NLP_STE_PRLI_ISSUE because the state means that PRLI was issued but we have not quite reached MAPPED_NODE state yet. If we received an RSCN in the PRLI_ISSUE state, then we should restart discovery again by going into DEVICE_RECOVERY. Fixes: dded1dc31aa4 ("scsi: lpfc: Modify when a node should be put in device recovery mode during RSCN") Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240628172011.25921-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmdsSaurav Kashyap
commit ce2065c4cc4f05635413f63f6dc038d7d4842e31 upstream. Firmware only supports single DSDs in ELS Pass-through IOCB (0x53h), sg cnt is decided by the SCSI ML. User is not aware of the cause of an acutal error. Return the appropriate return code that will be decoded by API and application and proper error message will be displayed to user. Fixes: 6e98016ca077 ("[SCSI] qla2xxx: Re-organized BSG interface specific code.") Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix optrom version displayed in FDMIShreyas Deodhar
commit 348744f27a35e087acc9378bf53537fbfb072775 upstream. Bios version was popluated for FDMI response. Systems with EFI would show optrom version as 0. EFI version is populated here and BIOS version is already displayed under FDMI_HBA_BOOT_BIOS_NAME. Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: lpfc: Fix a possible null pointer dereferenceHuai-Yuan Liu
[ Upstream commit 5e0bf3e8aec2cbc51123f84b29aaacbd91fc56fa ] In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len. Fixes: 479b0917e447 ("scsi: lpfc: Create a sysfs entry called lpfc_xcvr_data for transceiver info") Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com> Link: https://lore.kernel.org/r/20240621082545.449170-1-qq810974084@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: libsas: Fix exp-attached device scan after probe failure scanned in ↵Xingui Yang
again after probe failed [ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ] The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows: [78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Set qed_slowpath_params to zero before useSaurav Kashyap
[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Wait for stag work during unloadSaurav Kashyap
[ Upstream commit 78e88472b60936025b83eba57cffa59d3501dc07 ] If stag work is already scheduled and unload is called, it can lead to issues as unload cleans up the work element. Wait for stag work to get completed before cleanup during unload. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Don't process stag work during unload and recoverySaurav Kashyap
[ Upstream commit 51071f0831ea975fc045526dd7e17efe669dc6e1 ] Stag work can cause issues during unload and recovery, hence don't process it. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: sr: Fix unintentional arithmetic wraparoundJustin Stitt
[ Upstream commit 9fad9d560af5c654bb38e0b07ee54a4e9acdc5cd ] Running syzkaller with the newly reintroduced signed integer overflow sanitizer produces this report: [ 65.194362] ------------[ cut here ]------------ [ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9 [ 65.203607] -2147483648 * 177 cannot be represented in type 'int' [ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 65.219923] Call Trace: [ 65.221556] <TASK> [ 65.223029] dump_stack_lvl+0x93/0xd0 [ 65.225573] handle_overflow+0x171/0x1b0 [ 65.228219] sr_select_speed+0xeb/0xf0 [ 65.230786] ? __pm_runtime_resume+0xe6/0x130 [ 65.233606] sr_block_ioctl+0x15d/0x1d0 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer"). Firstly, let's change the type of "speed" to unsigned long as sr_select_speed()'s only caller passes in an unsigned long anyways. $ git grep '\.select_speed' | drivers/scsi/sr.c: .select_speed = sr_select_speed, ... | static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi, | unsigned long arg) | { | ... | return cdi->ops->select_speed(cdi, arg); | } Next, let's add an extra check to make sure we don't exceed 0xffff/177 (350) since 0xffff is the max speed. This has two benefits: 1) we deal with integer overflow before it happens and 2) we properly respect the max speed of 0xffff. There are some "magic" numbers here but I did not want to change more than what was necessary. Link: https://github.com/llvm/llvm-project/pull/82432 [1] Closes: https://github.com/KSPP/linux/issues/357 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: core: alua: I/O errors for ALUA state transitionsMartin Wilck
[ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/ Co-developed-by: Rajashekhar M A <rajs@netapp.com> Co-developed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <martin.wilck@suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()Nathan Chancellor
commit 9f365cb8bbd0162963d6852651d7c9e30adcb7b5 upstream. When building for a 32-bit platform such as ARM or i386, for which size_t is unsigned int, there is a warning due to using an unsigned long format specifier: drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] 1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n", | ~~~ | %u 1370 | i, sizeof(mr_sas_port->phy_mask) * 8); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the proper format specifier for size_t, %zu, to resolve the warning for all platforms. Fixes: 3668651def2c ("scsi: mpi3mr: Sanitise num_phys") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-11scsi: mpi3mr: Sanitise num_physTomas Henzl
[ Upstream commit 3668651def2c1622904e58b0280ee93121f2b10b ] Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20240226151013.8653-1-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: qedf: Make qedf_execute_tmf() non-preemptibleJohn Meneghini
[ Upstream commit 0d8b637c9c5eeaa1a4e3dfb336f3ff918eb64fec ] Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] Tested-by: Guangwu Zhang <guazhang@redhat.com> Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Link: https://lore.kernel.org/r/20240403150155.412954-1-jmeneghi@redhat.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05ata,scsi: libata-core: Do not leak memory for ata_port struct membersNiklas Cassel
[ Upstream commit f6549f538fe0b2c389e1a7037f4e21039e25137a ] libsas is currently not freeing all the struct ata_port struct members, e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL). Add a function, ata_port_free(), that is used to free a ata_port, including its struct members. It makes sense to keep the code related to freeing a ata_port in its own function, which will also free all the struct members of struct ata_port. Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27scsi: qedi: Fix crash while reading debugfs attributeManish Rangankar
[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ] The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d Tested-by: Martin Hoyer <mhoyer@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21scsi: sd: Use READ(16) when reading block zero on large capacity disksMartin K. Petersen
commit 7926d51f73e0434a6250c2fd1a0555f98d9a62da upstream. Commit 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") triggered a read to LBA 0 before attempting to inquire about device characteristics. This was done because some protocol bridge devices will return generic values until an attached storage device's media has been accessed. Pierre Tomon reported that this change caused problems on a large capacity external drive connected via a bridge device. The bridge in question does not appear to implement the READ(10) command. Issue a READ(16) instead of READ(10) when a device has been identified as preferring 16-byte commands (use_16_for_rw heuristic). Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890 Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com Fixes: 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") Cc: stable@vger.kernel.org Reported-by: Pierre Tomon <pierretom+12@ik.me> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Pierre Tomon <pierretom+12@ik.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memoryBreno Leitao
commit 4254dfeda82f20844299dca6c38cbffcfd499f41 upstream. There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/ Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Cc: stable@vger.kernel.org Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: mpi3mr: Fix ATA NCQ priority supportDamien Le Moal
commit 90e6f08915ec6efe46570420412a65050ec826b2 upstream. The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to the HBA if a read or write command directed at an ATA device should be translated to an NCQ read/write command with the high prioiryt bit set when the request uses the RT priority class and the user has enabled NCQ priority through sysfs. However, unlike the mpt3sas driver, the mpi3mr driver does not define the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never actually set and NCQ Priority cannot ever be used. Fix this by defining these missing atributes to allow a user to check if an ATA device supports NCQ priority and to enable/disable the use of NCQ priority. To do this, lift the function scsih_ncq_prio_supp() out of the mpt3sas driver and make it the generic SCSI SAS transport function sas_ata_ncq_prio_supported(). Nothing in that function is hardware specific, so this function can be used in both the mpt3sas driver and the mpi3mr driver. Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: core: Disable CDL by defaultDamien Le Moal
commit 52912ca87e2b810e5acdcdc452593d30c9187d8f upstream. For SCSI devices supporting the Command Duration Limits feature set, the user can enable/disable this feature use through the sysfs device attribute "cdl_enable". This attribute modification triggers a call to scsi_cdl_enable() to enable and disable the feature for ATA devices and set the scsi device cdl_enable field to the user provided bool value. For SCSI devices supporting CDL, the feature set is always enabled and scsi_cdl_enable() is reduced to setting the cdl_enable field. However, for ATA devices, a drive may spin-up with the CDL feature enabled by default. But the SCSI device cdl_enable field is always initialized to false (CDL disabled), regardless of the actual device CDL feature state. For ATA devices managed by libata (or libsas), libata-core always disables the CDL feature set when the device is attached, thus syncing the state of the CDL feature on the device and of the SCSI device cdl_enable field. However, for ATA devices connected to a SAS HBA, the CDL feature is not disabled on scan for ATA devices that have this feature enabled by default, leading to an inconsistent state of the feature on the device with the SCSI device cdl_enable field. Avoid this inconsistency by adding a call to scsi_cdl_enable() in scsi_cdl_check() to make sure that the device-side state of the CDL feature set always matches the scsi device cdl_enable field state. This implies that CDL will always be disabled for ATA devices connected to SAS HBAs, which is consistent with libata/libsas initialization of the device. Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16scsi: core: Handle devices which return an unusually large VPD page countMartin K. Petersen
commit d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 upstream. Peter Schneider reported that a system would no longer boot after updating to 6.8.4. Peter bisected the issue and identified commit b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") as being the culprit. Turns out the enclosure device in Peter's system reports a byteswapped page length for VPD page 0. It reports "02 00" as page length instead of "00 02". This causes us to attempt to access 516 bytes (page length + header) of information despite only 2 pages being present. Limit the page search scope to the size of our VPD buffer to guard against devices returning a larger page count than requested. Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") Cc: stable@vger.kernel.org Reported-by: Peter Schneider <pschneider1968@googlemail.com> Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/ Tested-by: Peter Schneider <pschneider1968@googlemail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12scsi: qla2xxx: Fix debugfs output for fw_resource_countHimanshu Madhani
[ Upstream commit 998d09c5ef6183bd8137d1a892ba255b15978bb4 ] DebugFS output for fw_resource_count shows: estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141] estimate exchange2 used[0] high water limit [1945] Which shows incorrect display due to missing newline in seq_print(). [mkp: fix checkpatch warning about space before newline] Fixes: 5f63a163ed2f ("scsi: qla2xxx: Fix exchange oversubscription for management commands") Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12scsi: qedf: Ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit d0184a375ee797eb657d74861ba0935b6e405c62 ] Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12scsi: bfa: Ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit 13d0cecb4626fae67c00c84d3c7851f6b62f7df3 ] Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 9f30b674759b ("bfa: replace 2 kzalloc/copy_from_user by memdup_user") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12scsi: hpsa: Fix allocation size for Scsi_Host private dataYuri Karpov
[ Upstream commit 504e2bed5d50610c1836046c0c195b0a6dba9c72 ] struct Scsi_Host private data contains pointer to struct ctlr_info. Restore allocation of only 8 bytes to store pointer in struct Scsi_Host private data area. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bbbd25499100 ("scsi: hpsa: Fix allocation size for scsi_host_alloc()") Signed-off-by: Yuri Karpov <YKarpov@ispras.ru> Link: https://lore.kernel.org/r/20240312170447.743709-1-YKarpov@ispras.ru Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12scsi: libsas: Fix the failure of adding phy with zero-address to portXingui Yang
[ Upstream commit 06036a0a5db34642c5dbe22021a767141f010b7a ] As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions"), reset the phy->entacted_sas_addr address to a zero-address when the link rate is less than 1.5G. Currently we find that when a new device is attached, and the link rate is less than 1.5G, but the device type is not NO_DEVICE, for example: the link rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting the phy->entacted_sas_addr address to the zero address, the port will continue to be created for the phy with the zero-address, and other phys with the zero-address will be tried to be added to the new port: [562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device) // phy19 is deleted but still on the parent port's phy_list [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp) [562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port Therefore, it should be the same as sas_get_phy_attached_dev(). Only when device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address. Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: hisi_sas: Handle the NCQ error returned by D2H frameXiang Chen
[ Upstream commit 358e919a351f2ea4b412e7dac6b1c23ec10bd4f5 ] We find that some disks use D2H frame instead of SDB frame to return NCQ error. Currently, only the I/O corresponding to the D2H frame is processed in this scenario, which does not meet the processing requirements of the NCQ error scenario. So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk in this scenario. Co-developed-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/20240402035513.2024241-2-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGNYihang Li
[ Upstream commit e675a4fd6d1f8990d3bed5dada3d20edfa000423 ] This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes (from 128). In libsas, this will cause SMP requests to be 8-byte aligned through kmalloc() allocation. However, for hisi_sas hardware, all command addresses must be 16-byte-aligned. Otherwise, the commands fail to be executed. ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request. Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com [1] Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240328090626.621147-1-liyihang9@huawei.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: bnx2fc: Remove spin_lock_bh while releasing resources after uploadSaurav Kashyap
[ Upstream commit c214ed2a4dda35b308b0b28eed804d7ae66401f9 ] The session resources are used by FW and driver when session is offloaded, once session is uploaded these resources are not used. The lock is not required as these fields won't be used any longer. The offload and upload calls are sequential, hence lock is not required. This will suppress following BUG_ON(): [ 449.843143] ------------[ cut here ]------------ [ 449.848302] kernel BUG at mm/vmalloc.c:2727! [ 449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1 Rebooting. [ 449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016 [ 449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc] [ 449.882910] RIP: 0010:vunmap+0x2e/0x30 [ 449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41 [ 449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206 [ 449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005 [ 449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000 [ 449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf [ 449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000 [ 449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0 [ 449.953701] FS: 0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000 [ 449.962732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0 [ 449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 449.993028] Call Trace: [ 449.995756] __iommu_dma_free+0x96/0x100 [ 450.000139] bnx2fc_free_session_resc+0x67/0x240 [bnx2fc] [ 450.006171] bnx2fc_upload_session+0xce/0x100 [bnx2fc] [ 450.011910] bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc] [ 450.018136] fc_rport_work+0x103/0x5b0 [libfc] [ 450.023103] process_one_work+0x1e8/0x3c0 [ 450.027581] worker_thread+0x50/0x3b0 [ 450.031669] ? rescuer_thread+0x370/0x370 [ 450.036143] kthread+0x149/0x170 [ 450.039744] ? set_kthread_struct+0x40/0x40 [ 450.044411] ret_from_fork+0x22/0x30 [ 450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls [ 450.048497] libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler [ 450.159753] ---[ end trace 712de2c57c64abc8 ]--- Reported-by: Guangwu Zhang <guazhang@redhat.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: mpi3mr: Avoid memcpy field-spanning write WARNINGShin'ichiro Kawasaki
[ Upstream commit 429846b4b6ce9853e0d803a2357bb2e55083adf0 ] When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver prints this WARNING message: memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1) WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr] The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8 replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended to be a flexible length array, so the WARN is a false positive. To suppress the WARN, remove the constant number '1' from the array declaration and clarify that it has flexible length. Also, adjust the memory allocation size to match the change. Suggested-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240323084155.166835-1-shinichiro.kawasaki@wdc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: lpfc: Use a dedicated lock for ras_fwlog stateJustin Tee
[ Upstream commit f733a76ea0a9a84aee4ac41b81fad4d610ecbd8e ] To reduce usage of and contention for hbalock, a separate dedicated lock is used to protect ras_fwlog state. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()Justin Tee
[ Upstream commit ded20192dff31c91cef2a04f7e20e60e9bb887d3 ] lpfc_worker_wake_up() calls the lpfc_work_done() routine, which takes the hbalock. Thus, lpfc_worker_wake_up() should not be called while holding the hbalock to avoid potential deadlock. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()Justin Tee
[ Upstream commit d11272be497e48a8e8f980470eb6b70e92eed0ce ] The ndlp object update in lpfc_nvme_unregister_port() should be protected by the ndlp lock rather than hbalock. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: lpfc: Update lpfc_ramp_down_queue_handler() logicJustin Tee
[ Upstream commit bb011631435c705cdeddca68d5c85fd40a4320f9 ] Typically when an out of resource CQE status is detected, the lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by reducing an sdev's queue_depth. However, the current lpfc_rampdown_queue_depth() logic does not help reduce queue_depth. num_cmd_success is never updated and is always zero, which means new_queue_depth will always be set to sdev->queue_depth. So, new_queue_depth = sdev->queue_depth - new_queue_depth always sets new_queue_depth to zero. And, scsi_change_queue_depth(sdev, 0) is essentially a no-op. Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth equal to sdev->queue_depth subtracted from number of times num_rsrc_err was incremented. If num_rsrc_err is >= sdev->queue_depth, then set new_queue_depth equal to 1. Eventually, the frequency of Good_Status frames will signal SCSI upper layer to auto increase the queue_depth back to the driver default of 64 via scsi_handle_queue_ramp_up(). Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handlingJustin Tee
[ Upstream commit 4623713e7ade46bfc63a3eade836f566ccbcd771 ] IRQF_ONESHOT is found to mask HBA generated interrupts when thread_fn is running. As a result, some EQEs/CQEs miss timely processing resulting in SCSI layer attempts to abort commands due to io_timeout. Abort CQEs are also not processed leading to the observations of hangs and spam of "0748 abort handler timed out waiting for aborting I/O" log messages. Remove the IRQF_ONESHOT flag. The cmpxchg and xchg atomic operations on lpfc_queue->queue_claimed already protect potential parallel access to an EQ/CQ should the thread_fn get interrupted by the primary irq handler. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 02:51:29 +0000