summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2019-11-28scsi: lpfc: fcoe: Fix link down issue after 1000+ link bouncesJames Smart
[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ] On FCoE adapters, when running link bounce test in a loop, initiator failed to login with switch switch and required driver reload to recover. Switch reached a point where all subsequent FLOGIs would be LS_RJT'd. Further testing showed the condition to be related to not performing FCF discovery between FLOGI's. Fix by monitoring FLOGI failures and once a repeated error is seen repeat FCF discovery. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: megaraid_sas: Fix msleep granularityShivasharan S
[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ] In megasas_transition_to_ready() driver waits 180seconds for controller to change FW state. Here we are calling msleep(1) in a loop for this. As explained in timers-howto.txt, msleep(1) will actually sleep longer than 1ms. If a faulty controller is connected, we will end up waiting for much more than 180 seconds causing unnecessary delays during load. Change the granularity of msleep() call from 1ms to 1000ms. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11Suganath Prabu
[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ] Currently driver is modifying both current & NVRAM/persistent data in Manufacturing page11. Driver should change only current copy of Manufacturing page11. It should not modify the persistent data. So removed the section of code where driver is modifying the persistent data of Manufacturing page11. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: mpt3sas: Fix Sync cache command failure during driver unloadSuganath Prabu
[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ] This is to fix SYNC CACHE and START STOP command failures with DID_NO_CONNECT during driver unload. In driver's IO submission patch (i.e. in driver's .queuecommand()) driver won't allow any SCSI commands to the IOC when ioc->remove_host flag is set and hence SYNC CACHE commands which are issued to the target drives (where write cache is enabled) during driver unload time is failed with DID_NO_CONNECT status. Now modified the driver to allow SYNC CACHE and START STOP commands to IOC, even when remove_host flag is set. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: dc395x: fix DMA API usage in sg_update_listChristoph Hellwig
[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ] We need to transfer device ownership to the CPU before we can manipulate the mapped data. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: dc395x: fix dma API usage in srb_doneChristoph Hellwig
[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ] We can't just transfer ownership to the CPU and then unmap, as this will break with swiotlb. Instead unmap the command and sense buffer a little earlier in the I/O completion handler and get rid of the pci_dma_sync_sg_for_cpu call entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_paramNathan Chancellor
[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ] Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from enumeration type 'enum iscsi_host_param' to different enumeration type 'enum iscsi_param' [-Wenum-conversion] &addr, param, buf); ^~~~~ 1 warning generated. iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine so add an explicit cast to iscsi_param to make it clear to Clang that this is expected behavior. Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: isci: Change sci_controller_start_task's return type to sci_statusNathan Chancellor
[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ] Clang warns when an enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from enumeration type 'enum sci_task_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = sci_controller_start_task(ihost, ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return SCI_SUCCESS; ~~~~~~ ^~~~~~~~~~~ drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return status; ~~~~~~ ^~~~~~ Avoid all of these implicit conversion by just making sci_controller_start_task use sci_status. This silences Clang and has no functional change since sci_task_status has all of its values mapped to something in sci_status. Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handlerNathan Chancellor
[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ] Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h file. Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28scsi: ips: fix missing break in switchGustavo A. R. Silva
[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ] Add missing break statement in order to prevent the code from falling through to case TEST_UNIT_READY. Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25scsi: libsas: always unregister the old device if going to discover newJason Yan
[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ] If we went into sas_rediscover_dev() the attached_sas_addr was already insured not to be zero. So it's unnecessary to check if the attached_sas_addr is zero. And although if the sas address is not changed, we always have to unregister the old device when we are going to register a new one. We cannot just leave the device there and bring up the new. Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25scsi: pm80xx: Fixed system hang issue during kexec bootDeepak Ukey
[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ] When the firmware is not responding, execution of kexec boot causes a system hang. When firmware assertion happened, driver get notified with interrupt vector updated in MPI configuration table. Then, the driver will read scratchpad register and set controller_fatal_error flag to true. Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25scsi: pm80xx: Corrected dma_unmap_sg() parameterDeepak Ukey
[ Upstream commit 76cb25b058034d37244be6aca97a2ad52a5fbcad ] For the function dma_unmap_sg(), the <nents> parameter should be number of elements in the scatter list prior to the mapping, not after the mapping. Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()George Kennedy
[ Upstream commit 288315e95264b6355e26609e9dec5dc4563d4ab0 ] sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before using it in debug message prints. Suggested-by: Matthew Wilcox <matthew.wilcox@oracle.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Acked-by: Matthew Wilcox <matthew.wilcox@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12scsi: qla2xxx: stop timer in shutdown pathNicholas Piggin
[ Upstream commit d3566abb1a1e7772116e4d50fb6a58d19c9802e5 ] In shutdown/reboot paths, the timer is not stopped: qla2x00_shutdown pci_device_shutdown device_shutdown kernel_restart_prepare kernel_restart sys_reboot This causes lockups (on powerpc) when firmware config space access calls are interrupted by smp_send_stop later in reboot. Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.") Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12scsi: lpfc: Honor module parameter lpfc_use_adiscDaniel Wagner
[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ] The initial lpfc_desc_set_adisc implementation in commit dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") this changed to (cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes and enhancements.") to (cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET) A customer reports that after a devloss, an ADISC failure is logged. It turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc = 0. [Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa [Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000 [mkp: fixed Hannes' email] Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: James Smart <james.smart@broadcom.com> Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.de Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12scsi: qla2xxx: fixup incorrect usage of host_byteHannes Reinecke
[ Upstream commit 66cf50e65b183c863825f5c28a818e3f47a72e40 ] DRIVER_ERROR is a a driver byte setting, not a host byte. The qla2xxx driver should rather return DID_ERROR here to be in line with the other drivers. Link: https://lore.kernel.org/r/20191018140458.108278-1-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10scsi: fix kconfig dependency warning related to 53C700_LE_ON_BEThomas Bogendoerfer
[ Upstream commit 8cbf0c173aa096dda526d1ccd66fc751c31da346 ] When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns: WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n] Selected by [y]: - SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y] Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it. Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10scsi: sni_53c710: fix compilation errorThomas Bogendoerfer
[ Upstream commit 0ee6211408a8e939428f662833c7301394125b80 ] Drop out memory dev_printk() with wrong device pointer argument. [mkp: typo] Link: https://lore.kernel.org/r/20191009151118.32350-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29scsi: core: try to get module before removing deviceYufen Yu
commit 77c301287ebae86cc71d03eb3806f271cb14da79 upstream. We have a test case like block/001 in blktests, which will create a scsi device by loading scsi_debug module and then try to delete the device by sysfs interface. At the same time, it may remove the scsi_debug module. And getting a invalid paging request BUG_ON as following: [ 34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8 [ 34.629189] Oops: 0000 [#1] SMP PTI [ 34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G W 5.4.0-rc3+ #473 [ 34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0 [ 34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0 [ 34.644545] Call Trace: [ 34.644907] scsi_host_dev_release+0x6b/0x1f0 [ 34.645511] device_release+0x74/0x110 [ 34.646046] kobject_put+0x116/0x390 [ 34.646559] put_device+0x17/0x30 [ 34.647041] scsi_target_dev_release+0x2b/0x40 [ 34.647652] device_release+0x74/0x110 [ 34.648186] kobject_put+0x116/0x390 [ 34.648691] put_device+0x17/0x30 [ 34.649157] scsi_device_dev_release_usercontext+0x2e8/0x360 [ 34.649953] execute_in_process_context+0x29/0x80 [ 34.650603] scsi_device_dev_release+0x20/0x30 [ 34.651221] device_release+0x74/0x110 [ 34.651732] kobject_put+0x116/0x390 [ 34.652230] sysfs_unbreak_active_protection+0x3f/0x50 [ 34.652935] sdev_store_delete.cold.4+0x71/0x8f [ 34.653579] dev_attr_store+0x1b/0x40 [ 34.654103] sysfs_kf_write+0x3d/0x60 [ 34.654603] kernfs_fop_write+0x174/0x250 [ 34.655165] __vfs_write+0x1f/0x60 [ 34.655639] vfs_write+0xc7/0x280 [ 34.656117] ksys_write+0x6d/0x140 [ 34.656591] __x64_sys_write+0x1e/0x30 [ 34.657114] do_syscall_64+0xb1/0x400 [ 34.657627] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 34.658335] RIP: 0033:0x7f156f337130 During deleting scsi target, the scsi_debug module have been removed. Then, sdebug_driver_template belonged to the module cannot be accessd, resulting in scsi_proc_hostdir_rm() BUG_ON. To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to increase refcount of module, avoiding the module been removed. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191015130556.18061-1-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29scsi: qla2xxx: Fix unbound sleep in fcport delete path.Quinn Tran
[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ] There are instances, though rare, where a LOGO request cannot be sent out and the thread in free session done can wait indefinitely. Fix this by putting an upper bound to sleep. Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29scsi: megaraid: disable device when probe failed after enabled deviceXiang Chen
[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ] For pci device, need to disable device when probe failed after enabled device. Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29scsi: ufs: skip shutdown if hba is not poweredStanley Chu
[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ] In some cases, hba may go through shutdown flow without successful initialization and then make system hang. For example, if ufshcd_change_power_mode() gets error and leads to ufshcd_hba_exit() to release resources of the host, future shutdown flow may hang the system since the host register will be accessed in unpowered state. To solve this issue, simply add checking to skip shutdown for above kind of situation. Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07scsi: core: Reduce memory required for SCSI loggingBart Van Assche
[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ] The data structure used for log messages is so large that it can cause a boot failure. Since allocations from that data structure can fail anyway, use kmalloc() / kfree() instead of that data structure. See also https://bugzilla.kernel.org/show_bug.cgi?id=204119. See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0. Reported-by: Jan Palus <jpalus@fastmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Palus <jpalus@fastmail.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()Adrian Hunter
[ Upstream commit 7c7cfdcf7f1777c7376fc9a239980de04b6b5ea1 ] Fix the following BUG: [ 187.065689] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 187.065790] RIP: 0010:ufshcd_vreg_set_hpm+0x3c/0x110 [ufshcd_core] [ 187.065938] Call Trace: [ 187.065959] ufshcd_resume+0x72/0x290 [ufshcd_core] [ 187.065980] ufshcd_system_resume+0x54/0x140 [ufshcd_core] [ 187.065993] ? pci_pm_restore+0xb0/0xb0 [ 187.066005] ufshcd_pci_resume+0x15/0x20 [ufshcd_pci] [ 187.066017] pci_pm_thaw+0x4c/0x90 [ 187.066030] dpm_run_callback+0x5b/0x150 [ 187.066043] device_resume+0x11b/0x220 Voltage regulators are optional, so functions must check they exist before dereferencing. Note this issue is hidden if CONFIG_REGULATORS is not set, because the offending code is optimised away. Notes for stable: The issue first appears in commit 57d104c153d3 ("ufs: add UFS power management support") but is inadvertently fixed in commit 60f0187031c0 ("scsi: ufs: disable vccq if it's not needed by UFS device") which in turn was reverted by commit 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device""). So fix applies v3.18 to v4.5 and v5.1+ Fixes: 57d104c153d3 ("ufs: add UFS power management support") Fixes: 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device"") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25scsi: fcoe: Embed fc_rport_priv in fcoe_rport structureHannes Reinecke
commit 023358b136d490ca91735ac6490db3741af5a8bd upstream. Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25scsi: hpsa: correct scsi command status issue after resetDon Brace
[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ] Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBASuganath Prabu
commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream. Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as per hardware design, if DMA-able range contains all 64-bits set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault. E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000 bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then HBA will fault the firmware. Driver will set 63-bit DMA mask to ensure the above address will not be used. Cc: <stable@vger.kernel.org> # 5.1.20+ Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25scsi: ibmvfc: fix WARN_ON during event pool releaseTyrel Datwyler
[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ] While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25scsi: megaraid_sas: fix panic on loading firmware crashdumpJunxiao Bi
[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ] While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10scsi: hpsa: correct ioaccel2 chainingDon Brace
[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ] - set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for the last s/g element. - set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when chaining. Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Matt Perricone <matt.perricone@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10scsi: ufs: Check that space was properly alloced in copy_query_responseAvri Altman
[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ] struct ufs_dev_cmd is the main container that supports device management commands. In the case of a read descriptor request, we assume that the proper space was allocated in dev_cmd to hold the returning descriptor. This is no longer true, as there are flows that doesn't use dev_cmd for device management requests, and was wrong in the first place. Fixes: d44a5f98bb49 (ufs: query descriptor API) Signed-off-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()Jan Kara
commit 240b4cc8fd5db138b675297d4226ec46594d9b3b upstream. Once we unlock adapter->hw_lock in pvscsi_queue_lck() nothing prevents just queued scsi_cmnd from completing and freeing the request. Thus cmd->cmnd[0] dereference can dereference already freed request leading to kernel crashes or other issues (which one of our customers observed). Store cmd->cmnd[0] in a local variable before unlocking adapter->hw_lock to fix the issue. CC: <stable@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22scsi: libsas: delete sas port if expander discover failedJason Yan
[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ] The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be deleted when the expander failed to discover. This will cause resource leak and a further issue of kernel BUG like below: [159785.843156] port-2:17:29: trying to add phy phy-2:17:29 fails: it's already part of another port [159785.852144] ------------[ cut here ]------------ [159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086! [159785.863000] Internal error: Oops - BUG: 0 [#1] SMP [159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G W OE 4.19.25-vhulk1901.1.0.h111.aarch64 #1 [159785.878458] Hardware name: Huawei Technologies Co., Ltd. Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019 [159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO) [159785.900094] pc : sas_port_add_phy+0x188/0x1b8 [159785.904524] lr : sas_port_add_phy+0x188/0x1b8 [159785.908952] sp : ffff0001120e3b80 [159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000 [159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560 [159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000 [159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708 [159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400 [159785.939264] x19: ffff802adea2d800 x18: 0000000000000010 [159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0 [159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165 [159785.955417] x13: 726c612073277469 x12: ffff00006887b830 [159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020 [159785.966186] x9 : 0000000000002453 x8 : 726f702072656874 [159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290 [159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000 [159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00 [159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000 [159785.993108] Process kworker/u96:2 (pid: 16993, stack limit = 0x0000000072dae094) [159786.000576] Call trace: [159786.003097] sas_port_add_phy+0x188/0x1b8 [159786.007179] sas_ex_get_linkrate.isra.5+0x134/0x140 [159786.012130] sas_ex_discover_expander+0x128/0x408 [159786.016906] sas_ex_discover_dev+0x218/0x4c8 [159786.021249] sas_ex_discover_devices+0x9c/0x1a8 [159786.025852] sas_discover_root_expander+0x134/0x160 [159786.030802] sas_discover_domain+0x1b8/0x1e8 [159786.035148] process_one_work+0x1b4/0x3f8 [159786.039230] worker_thread+0x54/0x470 [159786.042967] kthread+0x134/0x138 [159786.046269] ret_from_fork+0x10/0x18 [159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000) [159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE) hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE) [159786.067202] ---[ end trace 03622b9e2d99e196 ]--- [159786.071893] Kernel panic - not syncing: Fatal exception [159786.077190] SMP: stopping secondary CPUs [159786.081192] Kernel Offset: disabled [159786.084753] CPU features: 0x2,a2a00a38 Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: Jian Luo <luojian5@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()Varun Prakash
[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ] ip_dev_find() can return NULL so add a check for NULL pointer. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: bnx2fc: fix incorrect cast to u64 on shift operationColin Ian King
[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ] Currently an int is being shifted and the result is being cast to a u64 which leads to undefined behaviour if the shift is more than 31 bits. Fix this by casting the integer value 1 to u64 before the shift operation. Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22scsi: lpfc: add check for loss of ndlp when sending RRQJames Smart
[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ] There was a missing qualification of a valid ndlp structure when calling to send an RRQ for an abort. Add the check. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11scsi: lpfc: Fix SLI3 commands being issued on SLI4 devicesJames Smart
[ Upstream commit c95a3b4b0fb8d351e2329a96f87c4fc96a149505 ] During debug, it was seen that the driver is issuing commands specific to SLI3 on SLI4 devices. Although the adapter correctly rejected the command, this should not be done. Revise the code to stop sending these commands on a SLI4 adapter. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11scsi: qla4xxx: avoid freeing unallocated dma memoryArnd Bergmann
[ Upstream commit 608f729c31d4caf52216ea00d20092a80959256d ] Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c215978 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11scsi: ufs: Avoid configuring regulator with undefined voltage rangeStanley Chu
[ Upstream commit 3b141e8cfd54ba3e5c610717295b2a02aab26a05 ] For regulators used by UFS, vcc, vccq and vccq2 will have voltage range initialized by ufshcd_populate_vreg(), however other regulators may have undefined voltage range if dt-bindings have no such definition. In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg struct will be zero values and these values will be configured on regulators in different power modes. Currently this may have no harm if both "min_uV" and "max_uV" always keep "zero values" because regulator_set_voltage() will always bypass such invalid values and return "good" results. However improper values shall be fixed to avoid potential bugs. Simply bypass voltage configuration if voltage range is not defined. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11scsi: ufs: Fix regulator load and icc-level configurationStanley Chu
[ Upstream commit 0487fff76632ec023d394a05b82e87a971db8c03 ] Currently if a regulator has "<name>-fixed-regulator" property in device tree, it will skip current limit initialization. This lead to a zero "max_uA" value in struct ufs_vreg. However, "regulator_set_load" operation shall be required on regulators which have valid current limits, otherwise a zero "max_uA" set by "regulator_set_load" may cause unexpected behavior when this regulator is enabled or set as high power mode. Similarly, in device's icc_level configuration flow, the target icc_level shall be updated if regulator also has valid current limit, otherwise a wrong icc_level will be calculated by zero "max_uA" and thus causes unexpected results after it is written to device. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11scsi: libsas: Do discovery on empty PHY to update PHY infoJohn Garry
[ Upstream commit d8649fc1c5e40e691d589ed825998c36a947491c ] When we discover the PHY is empty in sas_rediscover_dev(), the PHY information (like negotiated linkrate) is not updated. As such, for a user examining sysfs for that PHY, they would see incorrect values: root@(none)$ cd /sys/class/sas_phy/phy-0:0:20 root@(none)$ more negotiated_linkrate 3.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 3.0 Gbit So fix this, simply discover the PHY again, even though we know it's empty; in the above example, this gives us: root@(none)$ more negotiated_linkrate Phy disabled We must do this after unregistering the device associated with the PHY (in sas_unregister_devs_sas_addr()). Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11Revert "scsi: sd: Keep disk read-only when re-reading partition"Martin K. Petersen
commit 8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc upstream. This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition") Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routinesAndrew Vasquez
commit 5cbdae10bf11f96e30b4d14de7b08c8b490e903c upstream. Commit e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") incorrectly set 'optrom_region_size' to 'start+size', which can overflow option-rom boundaries when 'start' is non-zero. Continue setting optrom_region_size to the proper adjusted value of 'size'. Fixes: e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") Cc: stable@vger.kernel.org Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16scsi: csiostor: fix missing data copy in csio_scsi_err_handler()Varun Prakash
[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ] If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16scsi: libsas: fix a race condition when smp task timeoutJason Yan
commit b90cd6f2b905905fb42671009dc0e27c310a16ae upstream. When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen. Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly. Reported-by: chenxiang <chenxiang66@hisilicon.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16scsi: storvsc: Fix calculation of sub-channel countMichael Kelley
[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ] When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many. This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs). Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16scsi: qla4xxx: fix a potential NULL pointer dereferenceKangjie Lu
[ Upstream commit fba1bdd2a9a93f3e2181ec1936a3c2f6b37e7ed6 ] In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-04-27scsi: megaraid_sas: return error when create DMA pool failedJason Yan
[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ] when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.cBenjamin Block
[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ] We had a test-report where, under memory pressure, adding LUNs to the systems would fail (the tests add LUNs strictly in sequence): [ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5 [ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS [ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43 [ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0 [ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection [ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off [ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08 [ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5525.857838] sdk: sdk1 [ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk [ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds [ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured [ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured Looking at the code of scsi_alloc_sdev(), and all the calling contexts, there seems to be no reason to use GFP_ATMOIC here. All the different call-contexts use a mutex at some point, and nothing in between that requires no sleeping, as far as I could see. Additionally, the code that later allocates the block queue for the device (scsi_mq_alloc_queue()) already uses GFP_KERNEL. There are similar allocations in two other functions: scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with GFP_KERNEL. Here is the contexts for the three functions so far: scsi_alloc_sdev() scsi_probe_and_add_lun() scsi_sequential_lun_scan() __scsi_scan_target() scsi_scan_target() mutex_lock() scsi_scan_channel() scsi_scan_host_selected() mutex_lock() scsi_report_lun_scan() __scsi_scan_target() ... __scsi_add_device() mutex_lock() __scsi_scan_target() ... scsi_report_lun_scan() ... scsi_get_host_dev() mutex_lock() scsi_probe_and_add_lun() ... scsi_add_lun() scsi_probe_and_add_lun() ... So replace all these, and give them a bit of a better chance to succeed, with more chances of reclaim. Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:55:51 +0000