summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2025-09-09scsi: sr: Reinstate rotational media flagMing Lei
[ Upstream commit 708e2371f77a9d3f2f1d54d1ec835d71b9d0dafe ] Reinstate the rotational media flag for the CD-ROM driver. The flag has been cleared since commit bd4a633b6f7c ("block: move the nonrot flag to queue_limits") and this breaks some applications. Move queue limit configuration from get_sectorsize() to sr_revalidate_disk() and set the rotational flag. Cc: Christoph Hellwig <hch@lst.de> Fixes: bd4a633b6f7c ("block: move the nonrot flag to queue_limits") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250827113550.2614535-1-ming.lei@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-09scsi: lpfc: Fix buffer free/clear order in deferred receive pathJohn Evans
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream. Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same. Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall") Cc: stable@vger.kernel.org Signed-off-by: John Evans <evans1210144@gmail.com> Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-04scsi: core: sysfs: Correct sysfs attributes access rightsDamien Le Moal
[ Upstream commit a2f54ff15c3bdc0132e20aae041607e2320dbd73 ] The SCSI sysfs attributes "supported_mode" and "active_mode" do not define a store method and thus cannot be modified. Correct the DEVICE_ATTR() call for these two attributes to not include S_IWUSR to allow write access as they are read-only. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: qla4xxx: Prevent a potential error pointer dereferenceDan Carpenter
[ Upstream commit 9dcf111dd3e7ed5fce82bb108e3a3fc001c07225 ] The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL. Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systemsRanjan Kumar
[ Upstream commit c91e140c82eb58724c435f623702e51cc7896646 ] On 32-bit systems, 64-bit BAR writes to admin queue registers are performed as two 32-bit writes. Without locking, this can cause partial writes when accessed concurrently. Updated per-queue spinlocks is used to serialize these writes and prevent race conditions. Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: mpi3mr: Drop unnecessary volatile from __iomem pointersRanjan Kumar
[ Upstream commit 6853885b21cb1d7157cc14c9d30cc17141565bae ] The volatile qualifier is redundant for __iomem pointers. Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per Upstream compliance. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: c91e140c82eb ("scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: mpi3mr: Fix race between config read submit and interrupt completionRanjan Kumar
commit e6327c4acf925bb6d6d387d76fc3bd94471e10d8 upstream. The "is_waiting" flag was updated after calling complete(), which could lead to a race where the waiting thread wakes up before the flag is cleared. This may cause a missed wakeup or stale state check. Reorder the operations to update "is_waiting" before signaling completion to ensure consistent state. Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Cc: stable@vger.kernel.org Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-20scsi: lpfc: Remove redundant assignment to avoid memory leakJiasheng Jiang
[ Upstream commit eea6cafb5890db488fce1c69d05464214616d800 ] Remove the redundant assignment if kzalloc() succeeds to avoid memory leak. Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: aacraid: Stop using PCI_IRQ_AFFINITYJohn Garry
[ Upstream commit dafeaf2c03e71255438ffe5a341d94d180e6c88e ] When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it means interrupts are spread around the available CPUs. It also means that the interrupts become managed, which means that an interrupt is shutdown when all the CPUs in the interrupt affinity mask go offline. Using managed interrupts in this way means that we should ensure that completions should not occur on HW queues where the associated interrupt is shutdown. This is typically achieved by ensuring only CPUs which are online can generate IO completion traffic to the HW queue which they are mapped to (so that they can also serve completion interrupts for that HW queue). The problem in the driver is that a CPU can generate completions to a HW queue whose interrupt may be shutdown, as the CPUs in the HW queue interrupt affinity mask may be offline. This can cause IOs to never complete and hang the system. The driver maintains its own CPU <-> HW queue mapping for submissions, see aac_fib_vector_assign(), but this does not reflect the CPU <-> HW queue interrupt affinity mapping. Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW queue interrupts. However this was later reverted in commit c5becf57dd56 ("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity") - it seems that there were other reports of hangs. I guess that this was due to some implementation issue in the original commit or maybe a HW issue. Fix the very original hang by just not using managed interrupts by not setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue affinity mask, so should not create completion problems if any CPUs go offline. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/ Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: Fix sas_user_scan() to handle wildcard and multi-channel scansRanjan Kumar
[ Upstream commit 37c4e72b0651e7697eb338cd1fb09feef472cc1a ] sas_user_scan() did not fully process wildcard channel scans (SCAN_WILD_CARD) when a transport-specific user_scan() callback was present. Only channel 0 would be scanned via user_scan(), while the remaining channels were skipped, potentially missing devices. user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected(). This ensures complete wildcard scanning without affecting transport-specific scanning behavior. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: mpi3mr: Correctly handle ATA device errorsDamien Le Moal
[ Upstream commit 04caad5a7ba86e830d04750417a15bad8ac2613c ] With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function mpi3mr_process_op_reply_desc() always forces a retry of commands terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command ioc_loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: pm80xx: Free allocated tags after failureFrancisco Gutierrez
[ Upstream commit 258a0a19621793b811356fc9d1849f950629d669 ] This change frees resources after an error is detected. Signed-off-by: Francisco Gutierrez <frankramirez@google.com> Link: https://lore.kernel.org/r/20250617210443.989058-1-frankramirez@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: mpt3sas: Correctly handle ATA device errorsDamien Le Moal
[ Upstream commit 15592a11d5a5c8411ac8494ec49736b658f6fbff ] With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function _scsih_io_done() always forces a retry of commands terminated with the status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the log_info for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structureJustin Tee
[ Upstream commit 6698796282e828733cde3329c887b4ae9e5545e9 ] If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may occur before sli4_hba.hdwqs are allocated. This may result in a null pointer dereference when attempting to take the abts_io_buf_list_lock for the first hardware queue. Fix by adding a null ptr check on phba->sli4_hba.hdwq and early return because this situation means there must have been an error during port initialization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: lpfc: Ensure HBA_SETUP flag is used only for SLI4 in dev_loss_tmo_callbkJustin Tee
[ Upstream commit 1cced5779e7a3ff7ec025fc47c76a7bd3bb38877 ] For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk always early returns. Add a phba->sli_rev check for SLI4 mode so that the SLI3 path can flow through the original dev_loss_tmo worker thread design to lpfc_dev_loss_tmo_handler instead of early return. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: bfa: Double-free fixjackysliu
[ Upstream commit add4c4850363d7c1b72e8fce9ccb21fdd2cf5dc9 ] When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails. Signed-off-by: jackysliu <1972843537@qq.com> Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-20scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocatedShowrya M N
[ Upstream commit 3ea3a256ed81f95ab0f3281a0e234b01a9cae605 ] In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70 Signed-off-by: Showrya M N <showrya@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: sd: Make sd shutdown issue START STOP UNIT appropriatelySalomon Dushimirimana
[ Upstream commit 8e48727c26c4d839ff9b4b73d1cae486bea7fe19 ] Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") enabled libata EH to manage device power mode trasitions for system suspend/resume and removed the flag from ata_scsi_dev_config. However, since the sd_shutdown() function still relies on the manage_system_start_stop flag, a spin-down command is not issued to the disk with command "echo 1 > /sys/block/sdb/device/delete" sd_shutdown() can be called for both system/runtime start stop operations, so utilize the manage_run_time_start_stop flag set in the ata_scsi_dev_config and issue a spin-down command during disk removal when the system is running. This is in addition to when the system is powering off and manage_shutdown flag is set. The manage_system_start_stop flag will still be used for drivers that still set the flag. Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com Tested-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: Revert "scsi: iscsi: Fix HW conn removal use after free"Li Lingfeng
[ Upstream commit 7bdc68921481c19cd8c85ddf805a834211c19e61 ] This reverts commit c577ab7ba5f3bf9062db8a58b6e89d4fe370447e. The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is used to free the initial reference counter of iscsi_cls_conn. For non-qla4xxx cases, the ->destroy_conn() callback (e.g., iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn() to remove the connection from the children list of session and free the connection at last. However for qla4xxx, it is not the case. The ->destroy_conn() callback of qla4xxx will keep the connection in the session conn_list and doesn't use iscsi_put_conn() to free the initial reference counter. Therefore, it seems necessary to keep the iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there will be memory leak problem. Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/ Fixes: c577ab7ba5f3 ("scsi: iscsi: Fix HW conn removal use after free") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: mpt3sas: Fix a fw_event memory leakTomas Henzl
[ Upstream commit 3e90b38781e3bdd651edaf789585687611638862 ] In _mpt3sas_fw_work() the fw_event reference is removed, it should also be freed in all cases. Fixes: 4318c7347847 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: isci: Fix dma_unmap_sg() nents valueThomas Fourier
[ Upstream commit 063bec4444d54e5f35d11949c5c90eaa1ff84c11 ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: ddcc7e347a89 ("isci: fix dma_unmap_sg usage") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: mvsas: Fix dma_unmap_sg() nents valueThomas Fourier
[ Upstream commit 0141618727bc929fe868153d21797f10ce5bef3f ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: b5762948263d ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: elx: efct: Fix dma_unmap_sg() nents valueThomas Fourier
[ Upstream commit 3a988d0b65d7d1713ce7596eae288a293f3b938e ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: 692e5d73a811 ("scsi: elx: efct: LIO backend interface routines") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250627114117.188480-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: core: Fix kernel doc for scsi_track_queue_full()Bagas Sanjaya
[ Upstream commit 6070bd558aee1eb5114e1676165bf0ccaa08240a ] Sphinx reports indentation warning on scsi_track_queue_full() return values: Documentation/driver-api/scsi:101: ./drivers/scsi/scsi.c:247: ERROR: Unexpected indentation. [docutils] Fix the warning by making the return values listing a bullet list. Fixes: eb44820c28bc ("[SCSI] Add Documentation and integrate into docbook build") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20250702035822.18072-2-bagasdotme@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents valueThomas Fourier
[ Upstream commit 023a293b9cd0bb86a9b50cd7688a3d9d266826db ] The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned. Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-24scsi: core: Enforce unlimited max_segment_size when virt_boundary_mask is setChristoph Hellwig
The virt_boundary_mask limit requires an unlimited max_segment_size for bio splitting to not corrupt data. Historically, the block layer tried to validate this, although the check was half-hearted until the addition of the atomic queue limits API. The full blown check then triggered issues with stacked devices incorrectly inheriting limits such as the virt boundary and got disabled in commit b561ea56a264 ("block: allow device to have both virt_boundary_mask and max segment size") instead of fixing the issue properly. Ensure that the SCSI mid layer doesn't set the default low max_segment_size limit for this case, and check for invalid max_segment_size values in the host template, similar to the original block layer check given that SCSI devices can't be stacked. This fixes reported data corruption on storvsc, although as far as I can tell storvsc always failed to properly set the max_segment_size limit as the SCSI APIs historically applied that when setting up the host, while storvsc only set the virt_boundary_mask when configuring the scsi_device. Fixes: 81988a0e6b03 ("storvsc: get rid of bounce buffer") Fixes: b561ea56a264 ("block: allow device to have both virt_boundary_mask and max segment size") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250624125233.219635-3-hch@lst.de Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-24scsi: sd: Fix VPD page 0xb7 length checkjackysliu
sd_read_block_limits_ext() currently assumes that vpd->len excludes the size of the page header. However, vpd->len describes the size of the entire VPD page, therefore the sanity check is incorrect. In practice this is not really a problem since we don't attach VPD pages unless they actually report data trailing the header. But fix the length check regardless. This issue was identified by Wukong-Agent (formerly Tencent Woodpecker), a code security AI agent, through static code analysis. [mkp: rewrote patch description] Signed-off-by: jackysliu <1972843537@qq.com> Link: https://lore.kernel.org/r/tencent_ADA5210D1317EEB6CD7F3DE9FE9DA4591D05@qq.com Fixes: 96b171d6dba6 ("scsi: core: Query the Block Limits Extension VPD page") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-23scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu()Thomas Fourier
dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: b3a271a94d00 ("[SCSI] qla4xxx: support iscsiadm session mgmt") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-23scsi: qla2xxx: Fix DMA mapping test in qla24xx_get_port_database()Thomas Fourier
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is often ~0. The error value should be tested with dma_mapping_error() like it was done in qla26xx_dport_diagnostics(). Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()Thomas Fourier
dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: a63e78eb2b0f ("scsi: fnic: Add support for fabric based solicited requests and responses") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250618065715.14740-2-fourier.thomas@gmail.com Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Reviewed-by: John Menghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Set appropriate logging level for log messageKaran Tilak Kumar
Replace KERN_INFO with KERN_DEBUG for a log message. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/stable/20250612002212.4144-1-kartilak%40cisco.com Link: https://lore.kernel.org/r/20250618003431.6314-4-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Add and improve logs in FDMI and FDMI ABTS pathsKaran Tilak Kumar
Add logs in FDMI and FDMI ABTS paths. Modify log text in these paths. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-3-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Turn off FDMI ACTIVE flags on link downKaran Tilak Kumar
When the link goes down and comes up, FDMI requests are not sent out anymore. Fix bug by turning off FNIC_FDMI_ACTIVE when the link goes down. Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-2-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times outKaran Tilak Kumar
When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them Fixes: 09c1e6ab4ab2 ("scsi: fnic: Add and integrate support for FDMI") Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Tested-by: Arun Easi <aeasi@cisco.com> Co-developed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Tested-by: Karan Tilak Kumar <kartilak@cisco.com> Cc: stable@vger.kernel.org Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250618003431.6314-1-kartilak@cisco.com Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: megaraid_sas: Fix invalid node indexChen Yu
On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20250604042556.3731059-1-yu.c.chen@intel.com Fixes: 8049da6f3943 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()") Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-16scsi: elx: efct: Fix memory leak in efct_hw_parse_filter()Vitaliy Shevtsov
strsep() modifies the address of the pointer passed to it so that it no longer points to the original address. This means kfree() gets the wrong pointer. Fix this by passing unmodified pointer returned from kstrdup() to kfree(). Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Link: https://lore.kernel.org/r/20250612163616.24298-1-v.shevtsov@mt-integration.ru Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: error: alua: I/O errors for ALUA state transitionsRajashekhar M A
When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. Signed-off-by: Rajashekhar M A <rajs@netapp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: storvsc: Increase the timeouts to storvsc_timeoutDexuan Cui
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and 5s and 10s are used elsewhere. It turns out that rarely the 5s is not enough on Azure, so let's use storvsc_timeout everywhere. In case a timeout happens and storvsc_channel_init() returns an error, close the VMBus channel so that any host-to-guest messages in the channel's ringbuffer, which might come late, can be safely ignored. Add a "const" to storvsc_timeout. Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09Merge branch '6.16/scsi-queue' into 6.16/scsi-fixesMartin K. Petersen
Pull in remaining fixes from queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: iscsi: Fix incorrect error path labels for flashnode operationsAlok Tiwari
Correct the error handling goto labels used when host lookup fails in various flashnode-related event handlers: - iscsi_new_flashnode() - iscsi_del_flashnode() - iscsi_login_flashnode() - iscsi_logout_flashnode() - iscsi_logout_flashnode_sid() scsi_host_put() is not required when shost is NULL, so jumping to the correct label avoids unnecessary operations. These functions previously jumped to the wrong goto label (put_host), which did not match the intended cleanup logic. Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to ensure proper error handling. Also remove the unused put_host label under iscsi_new_flashnode() as it is no longer needed. No functional changes beyond accurate error path correction. Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registersAnkit Chauhan
Spelling fixes: Deocder --> Decoder Memroy --> Memory This is a non-functional change aimed at improving code clarity. Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com> Link: https://lore.kernel.org/r/20250528110604.59528-1-ankitchauhan2065@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI fixes from James Bottomley: "Mostly trivial updates and bug fixes (core update is a comment spelling fix). The bigger UFS update is the clock scaling and frequency fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: qcom: Prevent calling phy_exit() before phy_init() scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear() scsi: aacraid: Remove useless code scsi: core: devinfo: Fix typo in comment scsi: ufs: core: Don't perform UFS clkscaling during host async scan
2025-06-04Merge tag 'pci-v6.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...
2025-05-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target, hisi_sas) with the only substantive core change being the removal of the stream_status member from the scsi_stream_status_header (to get rid of flex array members)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits) scsi: target: core: Constify struct target_opcode_descriptor scsi: target: core: Constify enabled() in struct target_opcode_descriptor scsi: hisi_sas: Fix warning detected by sparse scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table() scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort() scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller scsi: mvsas: Fix typos in SAS/SATA VSP register comments scsi: fnic: Replace memset() with eth_zero_addr() scsi: ufs: core: Support updating device command timeout scsi: ufs: core: Change hwq_id type and value scsi: ufs: core: Increase the UIC command timeout further scsi: zfcp: Simplify workqueue allocation scsi: ufs: core: Print error value as hex format in ufshcd_err_handler() scsi: sd: Remove the stream_status member from scsi_stream_status_header scsi: docs: Clean up some style in scsi_mid_low_api scsi: core: Remove unused scsi_dev_info_list_del_keyed() scsi: isci: Remove unused sci_remote_device_reset() scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream() ...
2025-05-28Merge tag 'hardening-v6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Update overflow helpers to ease refactoring of on-stack flex array instances (Gustavo A. R. Silva, Kees Cook) - lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo) - Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr) - Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh) - Add missed designated initializers now exposed by fixed randstruct (Nathan Chancellor, Kees Cook) - Document compilers versions for __builtin_dynamic_object_size - Remove ARM_SSP_PER_TASK GCC plugin - Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST builds - Kbuild: induce full rebuilds when dependencies change with GCC plugins, the Clang sanitizer .scl file, or the randstruct seed. - Kbuild: Switch from -Wvla to -Wvla-larger-than=1 - Correct several __nonstring uses for -Wunterminated-string-initialization * tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits) Revert "hardening: Disable GCC randstruct for COMPILE_TEST" lib/tests: randstruct: Add deep function pointer layout test lib/tests: Add randstruct KUnit test randstruct: gcc-plugin: Remove bogus void member net: qede: Initialize qede_ll_ops with designated initializer scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops md/bcache: Mark __nonstring look-up table integer-wrap: Force full rebuild when .scl file changes randstruct: Force full rebuild when seed changes gcc-plugins: Force full rebuild when plugins change kbuild: Switch from -Wvla to -Wvla-larger-than=1 hardening: simplify CONFIG_CC_HAS_COUNTED_BY overflow: Fix direct struct member initialization in _DEFINE_FLEX() kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper overflow: Add STACK_FLEX_ARRAY_SIZE() helper input/joystick: magellan: Mark __nonstring look-up table const watchdog: exar: Shorten identity name to fit correctly mod_devicetable: Enlarge the maximum platform_device_id name length overflow: Clarify expectations for getting DEFINE_FLEX variable sizes compiler_types: Identify compiler versions for __builtin_dynamic_object_size ...
2025-05-27scsi: aacraid: Remove useless codeTomas Henzl
There isn't a AAC_MIN_NATIVE_SIZE defined so remove eight useless lines. When at it remove also an unused #define No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20250521165148.8856-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-05-27scsi: core: devinfo: Fix typo in commentmrigendrachaubey
Correct a minor typo in a comment within scsi_devinfo.c, replacing "compatibile" with the correct spelling "compatible". Signed-off-by: mrigendrachaubey <mrigendra.chaubey@gmail.com> Link: https://lore.kernel.org/r/20250524035516.27341-1-mrigendra.chaubey@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-05-27Merge tag 'timers-cleanups-2025-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "Another set of timer API cleanups: - Convert init_timer*(), try_to_del_timer_sync() and destroy_timer_on_stack() over to the canonical timer_*() namespace convention. There is another large conversion pending, which has not been included because it would have caused a gazillion of merge conflicts in next. The conversion scripts will be run towards the end of the merge window and a pull request sent once all conflict dependencies have been merged" * tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack() treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try() timers: Rename init_timers() as timers_init() timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA timers: Rename __init_timer_on_stack() as __timer_init_on_stack() timers: Rename __init_timer() as __timer_init() timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack() timers: Rename init_timer_key() as timer_init_key()
2025-05-26Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - ublk updates: - Add support for updating the size of a ublk instance - Zero-copy improvements - Auto-registering of buffers for zero-copy - Series simplifying and improving GET_DATA and request lookup - Series adding quiesce support - Lots of selftests additions - Various cleanups - NVMe updates via Christoph: - add per-node DMA pools and use them for PRP/SGL allocations (Caleb Sander Mateos, Keith Busch) - nvme-fcloop refcounting fixes (Daniel Wagner) - support delayed removal of the multipath node and optionally support the multipath node for private namespaces (Nilay Shroff) - support shared CQs in the PCI endpoint target code (Wilfred Mallawa) - support admin-queue only authentication (Hannes Reinecke) - use the crc32c library instead of the crypto API (Eric Biggers) - misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes Reinecke, Leon Romanovsky, Gustavo A. R. Silva) - MD updates via Yu: - Fix that normal IO can be starved by sync IO, found by mkfs on newly created large raid5, with some clean up patches for bdev inflight counters - Clean up brd, getting rid of atomic kmaps and bvec poking - Add loop driver specifically for zoned IO testing - Eliminate blk-rq-qos calls with a static key, if not enabled - Improve hctx locking for when a plug has IO for multiple queues pending - Remove block layer bouncing support, which in turn means we can remove the per-node bounce stat as well - Improve blk-throttle support - Improve delay support for blk-throttle - Improve brd discard support - Unify IO scheduler switching. This should also fix a bunch of lockdep warnings we've been seeing, after enabling lockdep support for queue freezing/unfreezeing - Add support for block write streams via FDP (flexible data placement) on NVMe - Add a bunch of block helpers, facilitating the removal of a bunch of duplicated boilerplate code - Remove obsolete BLK_MQ pci and virtio Kconfig options - Add atomic/untorn write support to blktrace - Various little cleanups and fixes * tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits) selftests: ublk: add test for UBLK_F_QUIESCE ublk: add feature UBLK_F_QUIESCE selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE traceevent/block: Add REQ_ATOMIC flag to block trace events ublk: run auto buf unregisgering in same io_ring_ctx with registering io_uring: add helper io_uring_cmd_ctx_handle() ublk: remove io argument from ublk_auto_buf_reg_fallback() ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch() selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK selftests: ublk: support UBLK_F_AUTO_BUF_REG ublk: support UBLK_AUTO_BUF_REG_FALLBACK ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG ublk: prepare for supporting to register request buffer automatically ublk: convert to refcount_t selftests: ublk: make IO & device removal test more stressful nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk nvme: introduce multipath_always_on module param nvme-multipath: introduce delayed removal of the multipath head node nvme-pci: derive and better document max segments limits nvme-pci: use struct_size for allocation struct nvme_dev ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-09-27 06:23:44 +0000