summaryrefslogtreecommitdiff
path: root/drivers/scsi/ufs
AgeCommit message (Collapse)Author
2020-05-14scsi: ufs-mediatek: Customize WriteBooster flush policyStanley Chu
Change the WriteBooster policy to keep VCC on during runtime suspend if available WriteBooster buffer is less than 80%. Link: https://lore.kernel.org/r/20200509093716.21010-5-stanley.chu@mediatek.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-14scsi: ufs: Customize flush threshold for WriteBoosterStanley Chu
Allow flush threshold for WriteBooster to be customizable by vendors. To achieve this, make the value a variable in struct ufs_hba_variant_params. Also introduce UFS_WB_BUF_REMAIN_PERCENT() macro to provide a more flexible way to specify WriteBooster available buffer values. Link: https://lore.kernel.org/r/20200509093716.21010-4-stanley.chu@mediatek.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-14scsi: ufs: Introduce ufs_hba_variant_params to group customizable parametersStanley Chu
The UFS driver is growing more and more customizable parameters. Collect them in one place. Link: https://lore.kernel.org/r/20200509093716.21010-2-stanley.chu@mediatek.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-14scsi: ufs-mediatek: Make ufs_mtk_fixup_dev_quirks staticChenTao
Fix the following warning: drivers/scsi/ufs/ufs-mediatek.c:585:6: warning: symbol 'ufs_mtk_fixup_dev_quirks' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200514012655.127202-1-chentao107@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: ChenTao <chentao107@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Cleanup WriteBooster featureStanley Chu
Small cleanup as below items, 1. Use ufshcd_is_wb_allowed() directly instead of ufshcd_wb_sup() since ufshcd_wb_sup() just returns the result of ufshcd_is_wb_allowed(). 2. In ufshcd_suspend(), "else if (!ufshcd_is_runtime_pm(pm_op)) can be simplified to "else" since both have the same meaning. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200508080115.24233-9-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs-mediatek: Enable WriteBooster capabilityStanley Chu
Enable WriteBooster capability on MediaTek UFS platforms. Link: https://lore.kernel.org/r/20200508080115.24233-8-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Add LU Dedicated buffer mode support for WriteBoosterStanley Chu
According to UFS specification, there are two WriteBooster mode of operations: "LU dedicated buffer" mode and "shared buffer" mode. In the "LU dedicated buffer" mode, the WriteBooster Buffer is dedicated to a logical unit. If the device supports the "LU dedicated buffer" mode, this mode is configured by setting bWriteBoosterBufferType to 00h. The logical unit WriteBooster Buffer size is configured by setting the dLUNumWriteBoosterBufferAllocUnits field of the related Unit Descriptor. Only a value greater than zero enables the WriteBooster feature in the logical unit. Modify ufshcd_wb_probe() as above description to support LU Dedicated buffer mode. Note that according to UFS 3.1 specification, the valid value of bDeviceMaxWriteBoosterLUs parameter in Geometry Descriptor is 1, which means at most one LUN can have WriteBooster buffer in "LU dedicated buffer mode". Therefore this patch supports only one LUN with WriteBooster enabled. All WriteBooster related sysfs nodes are specifically mapped to the LUN with WriteBooster enabled in LU Dedicated buffer mode. Link: https://lore.kernel.org/r/20200508080115.24233-7-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Add "index" in parameter list of ufshcd_query_flag()Stanley Chu
For preparation of LU Dedicated buffer mode support on WriteBooster feature, "index" parameter shall be added and allowed to be specified by callers. Link: https://lore.kernel.org/r/20200508080115.24233-6-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs-mediatek: Add fixup_dev_quirks vopsStanley Chu
Add fixup_dev_quirk vops in MediaTek UFS platforms and provide an initial vendor-specific device quirk table. Link: https://lore.kernel.org/r/20200508080115.24233-5-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Export ufs_fixup_device_setup() functionStanley Chu
Export ufs_fixup_device_setup() to allow vendors to re-use it for fixing device quriks on specified UFS hosts. Link: https://lore.kernel.org/r/20200508080115.24233-4-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Introduce fixup_dev_quirks vopsStanley Chu
Some UFS deivces may have required device quirks or have non-standard features which are enabled only on specified UFS hosts or for special customers. To not "pollute" common device quirk list, i.e. ufs_fixups table, for those devices mentioned above, introduce "fixup_dev_quirks" vops to allow vendors to fix or modify device quirks accordingly. Link: https://lore.kernel.org/r/20200508080115.24233-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Enable WriteBooster on some pre-3.1 UFS devicesStanley Chu
The WriteBooster feature can be supported by some pre-3.1 UFS devices by upgrading firmware. To enable WriteBooster feature in such devices, introduce a device quirk to relax the entrance condition of ufshcd_wb_probe() to allow host driver to check those devices' WriteBooster capability. WriteBooster feature can be available if below all conditions are satisfied, 1. Host enables WriteBooster capability 2. UFS 3.1 device or UFS pre-3.1 device with quirk UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled 3. The device descriptor shall have DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP field 4. WriteBooster support is specified in above field Link: https://lore.kernel.org/r/20200508080115.24233-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-11scsi: ufs: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192550.GA16683@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs-qcom: Configure write booster typeAsutosh Das
Enable WriteBooster for Qualcomm platform. Link: https://lore.kernel.org/r/cd4cf745ea0b3a59c2075036e17316b97494fe65.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: sysfs: Add sysfs entries for write boosterAsutosh Das
Adds unit, device, geometry descriptor sysfs entries. Adds flags sysfs entries for write booster. Link: https://lore.kernel.org/r/98987ef17844292bd42c57613990a3a26c6de2b8.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: Add write booster feature supportAsutosh Das
The write performance of TLC NAND is considerably lower than SLC NAND. Using SLC NAND as a WriteBooster Buffer enables the write request to be processed with lower latency and improves the overall write performance. Adds support for shared-buffer mode WriteBooster. WriteBooster enable: SW enables it when clocks are scaled up, thus it's enabled only in high load conditions. WriteBooster disable: SW will disable the feature, when clocks are scaled down. Thus writes would go as normal writes. To keep the endurance of the WriteBooster Buffer at a maximum, this load-based toggling is adopted. Link: https://lore.kernel.org/r/2871444d9083b0e9323ef6d8ff1b544b7784adc9.1587591527.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-27scsi: ufs: Use true for bool variables in ufshcd_complete_dev_init()Jason Yan
Fix the following coccicheck warning: drivers/scsi/ufs/ufshcd.c:4140:6-14: WARNING: Assignment of 0/1 to bool variable. Link: https://lore.kernel.org/r/20200426094305.24083-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: ufs-qcom: remove unneeded variable 'ret'Jason Yan
Fix the following coccicheck warning: drivers/scsi/ufs/ufs-qcom.c:575:5-8: Unneeded variable: "ret". Return "0" on line 590 Link: https://lore.kernel.org/r/20200418070625.11756-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: ufs: full reinit upon resume if link was offAsutosh Das
During suspend, if the link is put to off, it would require a full initialization during resume. This patch resets and restores both the host and the card during initialization, otherwise host-only reset and restore would fail occasionally. Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Stanley Chu <stanley.chu@mediatek.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a batch of changes that didn't make it in the initial pull request because the lpfc series had to be rebased to redo an incorrect split. It's basically driver updates to lpfc, target, bnx2fc and ufs with the rest being minor updates except the sr_block_release one which fixes a use after free introduced by the removal of the global mutex in the first patch set" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits) scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear scsi: bnx2fc: fix boolreturn.cocci warnings scsi: zfcp: use fallthrough; scsi: aacraid: do not overwrite retval in aac_reset_adapter() scsi: sr: Fix sr_block_release() scsi: aic7xxx: Remove more FreeBSD-specific code scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug scsi: ufs: set device as active power mode after resetting device scsi: iscsi: Report unbind session event when the target has been removed scsi: lpfc: Change default SCSI LUN QD to 64 scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted scsi: libfc: If PRLI rejected, move rport to PLOGI state scsi: bnx2fc: Update the driver version to 2.12.13 scsi: bnx2fc: Fix SCSI command completion after cleanup is posted scsi: bnx2fc: Process the RQE with CQE in interrupt context scsi: target: use the stack for XCOPY passthrough cmds scsi: target: increase XCOPY I/O size scsi: target: avoid per-loop XCOPY buffer allocations scsi: target: drop xcopy DISK BLOCK LENGTH debug ...
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-01scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gearCan Guo
When scaling gear, use ufshcd_config_pwr_mode() instead of ufshcd_change_power_mode() so that vops_pwr_change_notify(PRE_CHANGE) can be utilized to allow vendors use customized settings before changing power mode. Link: https://lore.kernel.org/r/1581485910-8307-2-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-31scsi: ufs: set device as active power mode after resetting deviceStanley Chu
Currently ufshcd driver assumes that bInitPowerMode parameter is not changed by any vendors thus device power mode can be set as "Active" during initialization. According to UFS JEDEC specification, device power mode shall be "Active" after HW Reset is triggered if the bInitPowerMode parameter in Device Descriptor is default value. By above description, we can set device power mode as "Active" after device reset is triggered by vendor's callback. With this change, the link startup performance can be improved in some cases by not setting link_startup_again as true in ufshcd_link_startup(). Link: https://lore.kernel.org/r/20200327095835.10293-1-stanley.chu@mediatek.com Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs-mediatek: add error recovery for suspend and resumeStanley Chu
Once fail happens during suspend and resume flow if the desired low power link state is H8, link recovery is required for MediaTek UFS controller. For resume flow, since power and clocks are already enabled before invoking vendor's resume callback, simply using ufshcd_link_recovery() inside callback is fine. For suspend flow, the device power enters low power mode or is disabled before suspend callback, thus ufshcd_link_recovery() can not be directly used in vendor callback. One solution is to set the link to off state and then ufshcd_host_reset_and_restore() will be executed by ufshcd_suspend(). Link: https://lore.kernel.org/r/20200327095329.10083-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: export ufshcd_link_recoveryStanley Chu
Export ufshcd_link_recovery to allow vendors to recover failed link in vendor's callbacks. Link: https://lore.kernel.org/r/20200327095329.10083-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: ufs: Clean up ufshcd_scale_clks() and clock scaling error out pathSubhash Jadavani
This change introduces a func ufshcd_set_clk_freq() to explicitly set clock frequency so that it can be used in reset_and_restore path and in ufshcd_scale_clks(). This change also cleans up the clock scaling error out path. [mkp: commit desc] Link: https://lore.kernel.org/r/1585214742-5466-2-git-send-email-cang@codeaurora.org Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear") Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Do not rely on prefetched dataCan Guo
We were setting bActiveICCLevel attribute for UFS device only once but the type of this attribute has changed from persistent to volatile since UFS device specification v2.1. This attribute is set to the default value after power cycle or hardware reset event. It isn't safe to rely on prefetched data (only used for bActiveICCLevel attribute now). Hence this change removes the code related to data prefetching and set this parameter on every attempt to probe the UFS device. Tested-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Enable block layer runtime PM for well-known logical unitsCan Guo
Block layer RPM is enabled for the genernal UFS SCSI devices when they are probed by their driver. However block layer RPM is not enabled for UFS well-known SCSI devices. As UFS SCSI devices have their corresponding BSG char devices, accessing a BSG char device via IOCTL may send requests to its corresponding SCSI device through its request queue. If BSG IOCTL sends a request to a well-known SCSI device when HBA is not runtime active, due to block layer RPM not being enabled for the well-known SCSI devices, the HBA, which is at the top of a SCSI device's parent chain, will not be resumed. This change enables block layer RPM for the well-known SCSI devices so that block layer can handle RPM for the well-known SCSI devices just like for the general SCSI devices. Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-qcom: Override devfreq parametersAsutosh Das
Override devfreq parameters for power-performance trade-off. Link: https://lore.kernel.org/r/b6875729b6072134985c9113a820cf60a2af22e7.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Let vendor override devfreq parametersAsutosh Das
Vendor drivers may have a need to update the polling interval and thresholds. Provide a vops for vendor drivers to use. Link: https://lore.kernel.org/r/acd79e00396cff855256adad47f615ccdbde85ac.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufshcd: Update the set frequency to devfreqAsutosh Das
Currently, the frequency that devfreq provides the driver always leads the clocks to be scaled up. Hence, round the clock-rate to the nearest frequency before deciding to scale. Also update the devfreq statistics of current frequency. Link: https://lore.kernel.org/r/d0c6c22455811e9f0eda01f9bc70d1398b51b2bd.1585160616.git.asutoshd@codeaurora.org Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: Resume ufs host before accessing ufs deviceNitin Rawat
As a part of sysfs reading of descriptors/attributes/flags, query commands should only be executed when hba's power runtime status is active. To guarantee this, add pm_runtime_get/put_sync() to those paths where query commands are sent. Link: https://lore.kernel.org/r/f712a4f7bdb0ae32e0d83634731e7aaa1b3a6cdd.1585009663.git.asutoshd@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: customize the delay for enabling hostStanley Chu
MediaTek platform and UFS controller can dynamically customize the delay for host enabling according to different scenarios. For example, if UniPro enters lower-power mode, such delay can be minimized, otherwise longer delay shall be expected. Link: https://lore.kernel.org/r/20200318104016.28049-8-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: make HCE polling more compact to improve initialization latencyStanley Chu
Reduce the waiting period between each HCE (Host Controller Enable) polling from 5 ms to 1 ms. Also increase the maximum polling times to make "total polling time" roughly the same. This change could make HCE initialization faster to improve latency of ufshcd initialization, error recovery, and resume behaviors. Link: https://lore.kernel.org/r/20200318104016.28049-7-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: allow custom delay prior to host enablingStanley Chu
Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE bit. This delay may not be required or can be changed in different controllers. Make the delay as a changeable value in struct ufs_hba to allow it customized by vendors. Link: https://lore.kernel.org/r/20200318104016.28049-6-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs-mediatek: use common delay functionStanley Chu
A common delay function is introduced in UFS core driver, thus ufs-mediatek can use it instead of the private delay function. Link: https://lore.kernel.org/r/20200318104016.28049-5-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: introduce common and flexible delay functionStanley Chu
Introduce a common delay function to provide flexible way for users to take choices of udelay and usleep_range into consideration according to the required delay time. Link: https://lore.kernel.org/r/20200318104016.28049-4-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: use an enum for host capabilitiesStanley Chu
Use an enum to specify the host capabilities instead of #defines inside the structure definition. Link: https://lore.kernel.org/r/20200318104016.28049-3-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()Stanley Chu
In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get() get fail, uninitialized variable "tx_lanes" may be used as unexpected lane ID for DME configuration. Fix this issue by initializing "tx_lanes". Link: https://lore.kernel.org/r/20200318104016.28049-2-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Can Guo <cang@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-11scsi: docs: convert ufs.txt to ReSTMauro Carvalho Chehab
Link: https://lore.kernel.org/r/052d45576e342a217185e91a83793b384b1592a4.1583136624.git.mchehab+huawei@kernel.org Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-11scsi: ufs-mediatek: fix HOST_PA_TACTIVATE quirk for Samsung UFS DevicesStanley Chu
Device quirk "UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE" is enabled for all Samsung devices by default currently. However MediaTek UFS host requires different host PA_TACTIVATE configuration. Hence clear this quirk first and then apply vendor-specific value in vops callback. Link: https://lore.kernel.org/r/20200302135346.16797-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-10scsi: ufs: Fix possible unclocked access to auto hibern8 timer registerCan Guo
Before access auto hibner8 timer register, make sure power and clock are properly configured to avoid unclocked register access. Link: https://lore.kernel.org/r/1583398391-14273-1-git-send-email-cang@codeaurora.org Fixes: ba7af5ec5126 ("scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage") Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Simplify two testsBart Van Assche
lrbp->cmd is set only for SCSI commands. Use this knowledge to simplify two boolean expressions. Link: https://lore.kernel.org/r/20200123035637.21848-4-bvanassche@acm.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Introduce ufshcd_init_lrb()Bart Van Assche
This patch does not change any functionality but makes the next patch in this series easier to read. Link: https://lore.kernel.org/r/20200123035637.21848-3-bvanassche@acm.org Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: ufs-mediatek: add waiting time for reference clockStanley Chu
Some delays may be required either after gating or before ungating reference clock for device according to vendor requirements. Note that in UFS 3.0, the delay time after gating reference clock can be defined by attribute bRefClkGatingWaitTime. Use the formal value instead if it can be queried from device. Link: https://lore.kernel.org/r/20200220134848.8807-2-stanley.chu@mediatek.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs-qcom: Apply QUIRK_HOST_TACTIVATE for WDC UFS devicesCan Guo
Western Digital UFS devices require host's PA_TACTIVATE to be lower than device's PA_TACTIVATE, otherwise it may get stuck during hibern8 sequence. Link: https://lore.kernel.org/r/1582517363-11536-3-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufs: Allow vendor device quirks to be applied earlyCan Guo
Currently ufshcd_vops_apply_dev_quirks() comes after all UniPro parameters have been tuned. Move it up so that vendors have a chance to apply device quirks in advance. Link: https://lore.kernel.org/r/1582517363-11536-2-git-send-email-cang@codeaurora.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufshcd: use an enum for quirksChristoph Hellwig
Use an enum to specify the various quirks instead of #defines inside the structure definition. [mkp: fix typo] Link: https://lore.kernel.org/r/20200221140812.476338-3-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: ufshcd: remove unused quirksChristoph Hellwig
Remove various quirks that don't have users, as well as the dead code keyed off them. Link: https://lore.kernel.org/r/20200221140812.476338-2-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: ufs-qcom: Delay specific time before gate ref clkCan Guo
After enter hibern8, as UFS JEDEC ver 3.0 requires, a specific gating wait time is required before disable the device reference clock. If it is not specified, use the old delay. Link: https://lore.kernel.org/r/1581392451-28743-8-git-send-email-cang@codeaurora.org Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>