summaryrefslogtreecommitdiff
path: root/drivers/scsi/smartpqi/smartpqi_init.c
AgeCommit message (Collapse)Author
2022-02-07scsi: smartpqi: Fix kdump issue when controller is locked upMahesh Rajashekhara
Avoid dropping into shell if the controller is in locked up state. Driver issues SIS soft reset to bring back the controller to SIS mode while OS boots into kdump mode. If the controller is in lockup state, SIS soft reset does not work. Since the controller lockup code has not been cleared, driver considers the firmware is no longer up and running. Driver returns back an error code to OS and the kdump fails. Link: https://lore.kernel.org/r/164375212337.440833.11955356190354940369.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Update volume size after expansionMahesh Rajashekhara
After modifying logical volume size, lsblk command still shows previous size of logical volume. When the driver gets any event from firmware it schedules rescan worker with delay of 10 seconds. If array expansion is so quick that it gets completed in a second, the driver could not catch logical volume expansion due to worker delay. Since driver does not detect volume expansion, driver would not call rescan device to update new size to the OS. Link: https://lore.kernel.org/r/164375211833.440833.17023155389220583731.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Avoid drive spin-down during suspendSagar Biradar
On certain systems (based on PCI IDs), when the OS transitions the system into the suspend (S3) state, the BMIC flush cache command will indicate a system RESTART instead of SUSPEND. This avoids drive spin-down. Link: https://lore.kernel.org/r/164375211330.440833.7203813692110347698.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Resolve delay issue with PQI_HZ valueBalsundar P
Change PQI_HZ to HZ. PQI_HZ macro was set to 1000 when HZ value is less than 1000. By default, PQI_HZ will result into a delay of 10 seconds(for kernel, which has HZ = 100). So in this case when firmware raises an event, rescan worker will be scheduled after a delay of (10 x PQI_HZ) = 100 seconds instead of 10 seconds. Also driver uses PQI_HZ at many instances, which might result in some other issues with respect to delay. Link: https://lore.kernel.org/r/164375210825.440833.15510172447583227486.stgit@brunhilda.pdev.net Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Balsundar P <balsundar.p@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix a typo in func pqi_aio_submit_io()Kevin Barnett
Use correct pqi_aio_path_request structure to calculate the offset to sg_descriptors. The function pqi_aio_submit_io() uses the pqi_raid_path_request structure to calculate the offset of the structure member sg_descriptors. This is incorrect. It should be using the pqi_aio_path_request structure instead. This typo is benign because the offsets are the same in both structures. Link: https://lore.kernel.org/r/164375210321.440833.2566086558909686629.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix a name typo and cleanup codeKevin Barnett
Rename the function pqi_is_io_high_priority() to pqi_is_io_high_priority(). Remove 2 unnecessary lines from the function, and adjusted the white space. Link: https://lore.kernel.org/r/164375209818.440833.10908948825731635853.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Quickly propagate path failures to SCSI midlayerMurthy Bhat
Return DID_NO_CONNECT when a path failure is detected. When a path fails during I/O and AIO path gets disabled for a multipath device, the I/O was retried in the RAID path slowing down path fail detection. Returning DID_NO_CONNECT allows multipath to switch paths more quickly. Link: https://lore.kernel.org/r/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Eliminate drive spin down on warm bootSagar Biradar
Avoid drive spin down during a warm boot. Call the BMIC Flush Cache command (0xc2) to indicate the reason for the flush cache (shutdown, hibernate, suspend, or restart). Link: https://lore.kernel.org/r/164375208810.440833.11254644025650871435.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Enable SATA NCQ priority in sysfsGilbert Wu
Add device attribute 'sas_ncq_prio_enable' to enable SATA NCQ priority support and provide I/O priority in SCSI command and pass priority information to controller firmware. This device attribute works only when device has NCQ priority support and controller firmware can handle I/Os with NCQ priority attribute. Link: https://lore.kernel.org/r/164375208306.440833.7392577382127815362.stgit@brunhilda.pdev.net Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Add PCI IDsDon Brace
Add in new ZTE controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ZTE SmartROC3100 RS241-18i 2G 9005 / 028F / 1CF2 / 5449 ZTE SmartROC3100 RS242-18i 4G 9005 / 028F / 1CF2 / 544A ZTE SmartIOC2100 RS243-18i 9005 / 028F / 1CF2 / 544B ZTE SmartROC3100 RM241B-18i 2G 9005 / 028F / 1CF2 / 544D ZTE SmartROC3100 RM242B-18i 4G 9005 / 028F / 1CF2 / 544E ZTE SmartIOC2100 RM243B-18i 9005 / 028F / 1CF2 / 544F Add PCI ID for 1100-24i controller: VID / DID / SVID / SDID ---- ---- ---- ---- HBA 1100-24i 9005 / 028F / 9005 / 1304 Add PCI IDs for HPE and Adaptec devices: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec Smart HBA 2200-8io /e 9005 / 028F / 9005 / 1463 Adaptec Smart HBA 2200-16io /e 9005 / 028F / 9005 / 14C2 HPE SR308i-p Gen11 9005 / 028F / 1590 / 0382 HPE SR308i-o Gen11 9005 / 028F / 1590 / 0383 HPE SR932i-p Gen11 9005 / 028F / 1590 / 0381 Add PCI IDs for Inspur controllers: VID / DID / SVID / SDID ---- ---- ---- ---- INSPUR RS0800M5H24i 9005 / 028F / 1BD4 / 006B INSPUR RS0800M5E8I 9005 / 028F / 1BD4 / 006C INSPUR RS0800M5H8I 9005 / 028F / 1BD4 / 006D INSPUR RS0804M5R16i 9005 / 028F / 1BD4 / 006F INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0070 INSPUR RS0800M5H16i 9005 / 028F / 1BD4 / 0071 INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0072 NT RAID 3100-24i 9005 / 028F / 1F0C / 3161 Add HPE and Adaptec OROC PCI IDs: VID / DID / SVID / SDID ---- ---- ---- ---- HPE SR216i-o Gen11 9005 / 028F / 9005 / 036F Adaptec SmartRAID 3284-16io /e/uC 9005 / 028F / 9005 / 1473 Adaptec SmartRAID 3254-16io /e 9005 / 028F / 9005 / 1474 Add PCI IDs for new channel controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartRAID 3254-8i /e 9005 / 028F / 9005 / 14A4 Adaptec SmartRAID 3252-8i /e 9005 / 028F / 9005 / 14A5 Adaptec SmartRAID 3204-8i /e 9005 / 028F / 9005 / 14A6 Align PCI IDs with OOB driver. Easier to check for differences. Link: https://lore.kernel.org/r/164375207802.440833.15947108153078495425.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Co-developed-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Co-developed-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Co-developed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-07scsi: smartpqi: Fix rmmod stack traceDon Brace
Prevent "BUG: scheduling while atomic: rmmod" stack trace. Stop setting spin_locks before calling OS functions to remove devices. Link: https://lore.kernel.org/r/164375207296.440833.4996145011193819683.stgit@brunhilda.pdev.net Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: smartpqi: Switch to attribute groupsBart Van Assche
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-43-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: smartpqi: Call scsi_done() directlyBart Van Assche
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-71-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update version to 2.1.12-055Don Brace
Update driver version to reflect changes. Link: https://lore.kernel.org/r/20210928235442.201875-12-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add 3252-8i PCI idMike McGowen
Add PCI ID information for the Adaptec SmartRAID 3252-8i controller: 9005 / 028F / 9005 / 14A2 Link: https://lore.kernel.org/r/20210928235442.201875-11-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix duplicate device nodes for tape changersKevin Barnett
Stop the OS from re-discovering multiple LUNs for tape drive and medium changer. Duplicate device nodes for Ultrium tape drive and medium changer are being created. The Ultrium tape drive is a multi-LUN SCSI target. It presents a LUN for the tape drive and a 2nd LUN for the medium changer. Our controller FW lists both LUNs in the RPL results. As a result, the smartpqi driver exposes both devices to the OS. Then the OS does its normal device discovery via the SCSI REPORT LUNS command, which causes it to re-discover both devices a 2nd time, which results in the duplicate device nodes. Link: https://lore.kernel.org/r/20210928235442.201875-10-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Fix boot failure during LUN rebuildMike McGowen
Move the delay in the register polling loop to the beginning of the loop to ensure there is always a delay between writing the register and reading it. Link: https://lore.kernel.org/r/20210928235442.201875-9-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add extended report physical LUNsMike McGowen
Add support for the new extended formats in the data returned from the Report Physical LUNs command for controllers that enable this feature. The new formats allow the reporting of 16-byte WWIDs. Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Avoid failing I/Os for offline devicesMahesh Rajashekhara
Prevent kernel crash by failing outstanding I/O request when the OS takes device offline. When posted I/Os to the controller's inbound queue are not picked by the controller, the driver will halt the controller and take the controller offline. When the driver takes the controller offline, the driver will fail all the outstanding requests which can sometimes lead to an OS crash. Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add TEST UNIT READY check for SANITIZE operationDon Brace
Send a TEST UNIT READY to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing a sanitize operation. According to SCSI SBC4 specification section 4.11.2 "Commands allowed during SANITIZE", some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until SANITIZE has completed. This can take hours. According to document HPE Smart Storage Administrator User Guide, during the sanitize erase operation, the drive is unusable. I.e. the expected behavior for SANITIZE is the that disk remains offline even after SANITIZE has completed. The customer is expected to re-enable the disk using the management utility. Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update LUN reset handlerKevin Barnett
Enhance check for commands queued to the controller. Add new function pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for submission to controller across all queue groups to drain. Add helper functions to obtain queue command counts for each queue group. These queues should drain quickly as they are already staged to be submitted down to the controller's IB queue. Enhance check for outstanding command completion. Update the count of outstanding commands while waiting. This value was not re-obtained and was potentially causing infinite wait for all completions. Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Capture controller reason codesMurthy Bhat
In some rare cases, the driver can halt the controller. Add a reason code describing why the controller was halted. Store this reason code in a controller register to aid in debugging the issue. Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Add controller handshake during kdumpMahesh Rajashekhara
Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-05scsi: smartpqi: Update device removal managementDon Brace
Update device removal path to handle issues for: - rmmod: Correct stack trace when removing devices. - rmmod: Synchronize SCSI cache. - Update handling for removing devices using sysfs. Link: https://lore.kernel.org/r/20210928235442.201875-2-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-17scsi: smartpqi: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code a bit according to the use of a flexible-array member in struct pqi_event_config instead of a one-element array, and use the struct_size() helper. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210810210741.GA58765@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-16scsi: smartpqi: Fix an error code in pqi_get_raid_map()Dan Carpenter
Return -EINVAL on failure instead of success. Link: https://lore.kernel.org/r/20210810084613.GB23810@kili Fixes: a91aaae0243b ("scsi: smartpqi: allow for larger raid maps") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-43-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Update version to 2.1.10-020Don Brace
Link: https://lore.kernel.org/r/20210714182847.50360-10-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Fix ISR accessing uninitialized dataMike McGowen
Correct driver's ISR accessing a data structure member that has not been fully initialized during driver initialization. The pqi queue groups can have uninitialized members when an interrupt fires. This has not resulted in any driver crashes. This was found during our own internal testing. No bugs were ever filed. Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Add PCI IDs for new ZTE controllersBalsundar P
Add support for ZTE RM241-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5445 Add support for ZTE RM242-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5446 Add support for ZTE RM243-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5447 Add support for ZTE SDPSA/B-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B27 Add support for ZTE SDPSA/B_I-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B29 Add support for ZTE SDPSA/B_L-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B45 Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Balsundar P <balsundar.p@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Add PCI ID for new ntcom controllerMike McGowen
Add support for Norsi ntcom Raid-24i controller: VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161 Link: https://lore.kernel.org/r/20210714182847.50360-7-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Add SCSI cmd info for resetsMurthy Bhat
Report on SCSI command that has triggered the reset. Also add check for NULL SCSI commands resulting from issuing sg_reset when there is no outstanding commands. Example: sg_reset -d /dev/sgXY smartpqi 0000:39:00.0: resetting scsi 4:0:1:0 due to cmd 0x12 Link: https://lore.kernel.org/r/20210714182847.50360-6-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Change driver module macros to MicrochipDon Brace
Change driver module macros to reflect copyright changes: Microsemi to Microchip. Link: https://lore.kernel.org/r/20210714182847.50360-4-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Justin Lindley <Justin.lindley@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Update copyright noticesKevin Barnett
Updated copyright notices and company name strings to reflect Microchip ownership. Link: https://lore.kernel.org/r/20210714182847.50360-3-don.brace@microchip.com Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: smartpqi: Add PCI IDs for H3C P4408 controllersMahesh Rajashekhara
Add support for H3C P4408-Ma-8i-2GB device ID: VID_9005, DID_028F, SVID_193D and SDID_1108 VID_9005, DID_028F, SVID_193D and SDID_1109 Link: https://lore.kernel.org/r/20210714182847.50360-2-don.brace@microchip.com Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Murthy Bhat <Murthy.Bhat@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Introduce scsi_build_sense()Hannes Reinecke
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status. Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-15scsi: smartpqi: Remove unused functionsBart Van Assche
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-14-bvanassche@acm.org Cc: Don Brace <don.brace@microchip.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Fix blocks_per_row static checker issueDon Brace
Dan Carpenter found a possible divide by 0 issue in the smartpqi driver in functions pci_get_aio_common_raid_map_values() and pqi_calc_aio_r5_or_r6(). The variable rmd->blocks_per_row is used as a divisor and could be 0. Using rmd->blocks_per_row as a divisor without checking it for 0 first. Correct these possible divide by 0 conditions by insuring that rmd->blocks_per_row is not zero before usage. The check for non-0 was too late to prevent a divide by 0 condition. Add in a comment to explain why the check for non-zero is necessary. If the member is 0, return PQI_RAID_BYPASS_INELIGIBLE before any division is performed. Link: https://lore.kernel.org/linux-scsi/YG%2F5kWHHAr7w5dU5@mwanda/ Link: https://lore.kernel.org/r/161850492435.7302.392780350442938047.stgit@brunhilda Fixes: 6702d2c40f31 ("scsi: smartpqi: Add support for RAID5 and RAID6 writes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update version to 2.1.8-045Don Brace
Update version. Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add new PCI IDsKevin Barnett
Add support for newer hardware. Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Acked-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Correct system hangs when resuming from hibernationKevin Barnett
Correct system hangs when resuming from hibernation after first successful hibernation/resume cycle. Rare condition involving OFA. Note: Suspend/resume is not supported on many platforms. It was originally intended for workstations. Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update enclosure identifier in sysfsMurthy Bhat
Update enclosure identifier field corresponding to physical devices in lsscsi/sysfs. During device add the SCSI devtype is filled in during slave_configure(). However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns zero for the SCSI devtype field, and valid devtype is overwritten by zero. Due to this, lsscsi output shows wrong values. Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add additional logging for LUN resetsKevin Barnett
LUN resets can take longer to complete. Adding in more driver logging helps show where the driver is in the reset process. Add a timeout in pqi_device_wait_for_pending_io() to cap how long the driver will wait for outstanding commands. Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhilda Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Add phy ID support for the physical drivesMurthy Bhat
Display topology using PHY numbers. PHY (both local and remote) numbers corresponding to physical drives are read from BMIC_IDENTIFY_PHYSICAL_DEVICE. Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Convert snprintf() to scnprintf()Kevin Barnett
The entire Linux kernel has been slowly migrating from snprintf() to scnprintf(), so we are doing our part. This article explains the rationale for this change: https: //lwn.net/Articles/69419/ Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Fix driver synchronization issuesKevin Barnett
- Synchronize OFA and controller offline events. Prevent I/O during the above conditions. - Cleanup pqi_device_wait_for_pending_io() by checking the device->scsi_cmds_outstanding instead of walking the device's list of commands. - Stop failing all I/O for all devices. This was causing OS to retry them, delaying OFA. - Clean up cache flush. The controller is checked for offline status in lower level functions. Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update device scan operationsKevin Barnett
Change return type from EINPROGRESS to EBUSY to signal applications to retry a REGNEWD if the driver cannot process the REGNEWD. Events such as OFA, suspend, and shutdown return EINPROGRESS if a scan is currently running. This prevents applications from immediately retrying REGNEWD. Schedule a new REGNEWD if system low on memory. Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update OFA managementKevin Barnett
OFA, Online Firmware Activation, allows users to update firmware without a reboot. - Change OFA setup to a worker thread - Delay soft resets - Add OFA event handler to allow FW to initiate OFA - Add in-memory allocation to OFA events - Update OFA buffer size calculations - Add ability to cancel OFA events - Update OFA quiesce/un-quiesce - Prevent Kernel crashes while issuing ioctl during OFA - Returned EBUSY for pass-through IOCTLs throughout all stages of OFA - Add mutex to prevent parallel OFA updates. Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: smartpqi: Update RAID bypass handlingKevin Barnett
Simplify AIO retry management by removing retry list and list management. Need to retry is already set in the response status. Also remove the bypass worker thread. Accelerated I/O requests bypass the RAID engine and go directly to either an HBA disk or to a physical component of a RAID volume. Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 13:30:38 +0000