summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt3sas/mpt3sas_base.h
AgeCommit message (Collapse)Author
2018-04-03Merge branch 'fixes' into miscJames Bottomley
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc scsi: qla2xxx: Fix FC-NVMe LUN discovery" Merge is non-trivial and has been verified by Qlogic (Cavium) Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-03-06scsi: mpt3sas: clarify mmio pointer typesArnd Bergmann
The newly added code mixes up phys_addr_t/resource_size_t with dma_addr_t and void pointers, as seen from these compiler warning: drivers/scsi/mpt3sas/mpt3sas_base.c: In function '_base_get_chain_phys': drivers/scsi/mpt3sas/mpt3sas_base.c:235:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] base_chain_phys = (void *)ioc->chip_phys + MPI_FRAME_START_OFFSET + ^ drivers/scsi/mpt3sas/mpt3sas_base.c: In function '_clone_sg_entries': drivers/scsi/mpt3sas/mpt3sas_base.c:427:20: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] sgel->Address = (dma_addr_t)dst_addr_phys; ^ drivers/scsi/mpt3sas/mpt3sas_base.c:438:7: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (dma_addr_t)buff_ptr_phys; ^ drivers/scsi/mpt3sas/mpt3sas_base.c:444:10: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (dma_addr_t)buff_ptr_phys; Both dma_addr_t and phys_addr_t may be wider than a pointer, so we must avoid the conversion to pointer types. This also helps readability. A second problem is treating MMIO addresses from a 'struct resource' as addresses that can be used for DMA on that device. In almost all cases, those are the same, but on some of the more obscure architectures, PCI memory address 0 is mapped into the CPU address space at a nonzero offset. I don't have a good fix for that, so I'm adding a comment here, plus a WARN_ON() that triggers whenever the phys_addr_t number is outside of the low 32-bit address space and causes a straight overflow when assigned to the 32-bit sgel->Address. Fixes: 182ac784b41f ("scsi: mpt3sas: Introduce Base function for cloning.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27scsi: mpt3sas: Do not use 32-bit atomic request descriptor for Ventura ↵Suganath Prabu S
controllers. Sending I/O through 32 bit descriptors to Ventura series of controller results in IO timeout on certain conditions. This error only occurs on systems with high I/O activity. Changes in this patch will prevent driver from using 32 bit descriptor and use 64 bit Descriptors Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27scsi: mpt3sas: Introduce Base function for cloning.Suganath Prabu Subramani
All scsi IO's and config request's data buffer and sgl are cloned to system memory in _clone_sg_entries before submitting it to firmware. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27scsi: mpt3sas: Introduce API to get BAR0 mapped buffer addressSuganath Prabu Subramani
For MPI Endpoint/Mcpu, driver should double buffer data buffer/SGLs. This is normally copied from host to internal memory of IOC by DMA engine of PCI device. Since the interface to DMA from host to mCPU is not present for Mcpu/MPI Endpoint device, driver does double copy of those buffers directly to the mCPU memory region via BAR0 region. Introduced API to calculate and return BAR0 mapped host buffer's physical and virtual address for the provided smid. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27scsi: mpt3sas: Add PCI device ID for Andromeda.Suganath Prabu Subramani
Add device ID and flag for Andromeda/MPI Endpoint. [mkp: typo] Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-21scsi: mpt3sas: wait for and flush running commands on shutdown/unloadSreekanth Reddy
This patch finishes all outstanding SCSI IO commands (but not other commands, e.g., task management) in the shutdown and unload paths. It first waits for the commands to complete (this is done after setting 'ioc->remove_host = 1 ', which prevents new commands to be queued) then it flushes commands that might still be running. This avoids triggering error handling (e.g., abort command) for all commands possibly completed by the adapter after interrupts disabled. [mauricfo: introduced something in commit message.] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: mpt3sas: lockless command submissionSuganath Prabu Subramani
Performance improvement using block layer tag. Curent driver gets scsiio tracker and free smid from link list and array based tracking managed by driver. Accessing list in main io path is performance pentaly because of protection using spinlock "scsi_lookup_lock". In this patch: 1. Driver removes all link list access from main io path and use scmd->request->tag to get free smid. 2. Instead of holding 'struct scsiio_tracker' in its own pool driver can embed it into the scsi command. Driver provides cmd_size in scsi_host_template, so that struct scsiio_tracker is preallocated by scsi mid layer for each scsi command. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: mpt3sas: simplify mpt3sas_scsi_issue_tm()Hannes Reinecke
Move the check for outstanding commands out of the function allowing us to simplify the overall code. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: mpt3sas: Introduce mpt3sas_get_st_from_smid()Hannes Reinecke
Abstract accesses to the scsi_lookup array by introducing mpt3sas_get_st_from_smid(). Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-06scsi: mpt3sas: fix dma_addr_t castsArnd Bergmann
The newly added base_make_prp_nvme function triggers a build warning on some 32-bit configurations: drivers/scsi/mpt3sas/mpt3sas_base.c: In function 'base_make_prp_nvme': drivers/scsi/mpt3sas/mpt3sas_base.c:1664:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] msg_phys = (dma_addr_t)mpt3sas_base_get_pcie_sgl_dma(ioc, smid); After taking a closer look, I found that the problem is that the new code mixes up pointers and dma_addr_t values unnecessarily. This changes it to use the correct types consistently, which lets us get rid of a lot of type casts in the process. I'm also renaming some variables to avoid confusion between physical and dma address spaces that are often distinct. Fixes: 016d5c35e278 ("scsi: mpt3sas: SGL to PRP Translation for I/Os to NVMe devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: Update mpt3sas driver version.Suganath Prabu Subramani
Updated mpt3sas driver version to 17.100.00.00 Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: Set NVMe device queue depth as 128Suganath Prabu Subramani
Sets nvme device queue depth, name and displays device capabilities Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: API 's to support NVMe drive addition to SMLSuganath Prabu Subramani
Below Functions are added in various paths to support NVMe drive addition. _scsih_pcie_add_device _scsih_pcie_device_add _scsih_pcie_device_init_add _scsih_check_pcie_access_status _scsih_pcie_check_device mpt3sas_get_pdev_by_handle mpt3sas_config_get_pcie_device_pg0 mpt3sas_config_get_pcie_device_pg2 Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: Added support for nvme encapsulated request message.Suganath Prabu Subramani
* Mpt3sas driver uses the NVMe Encapsulated Request message to send an NVMe command to an NVMe device attached to the IOC. * Normal I/O commands like reads and writes are passed to the controller as SCSI commands and the controller has the ability to translate the commands to NVMe equivalent. * This encapsulated NVMe command is used by applications to send direct NVMe commands to NVMe drives. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: SGL to PRP Translation for I/Os to NVMe devicesSuganath Prabu Subramani
* Added support for translating the SGLs associated with incoming commands either to IEE SGL or NVMe PRPs for NVMe devices. * The hardware translation of IEEE SGL to NVMe PRPs has limitations and if a command cannot be translated by hardware then it will go to firmware and the firmware needs to translate it. This will have a performance impact. To avoid that, the driver proactively checks whether the translation will be done in hardware or not. If not, then driver translates. [mkp: clarified commit message] Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-03scsi: mpt3sas: Add nvme device support in slave alloc, target alloc and probeSuganath Prabu Subramani
1) Added support for probing pcie device and adding NVMe drives to SML and driver's internal list pcie_device_list. 2) Added support for determing NVMe as boot device. 3) Added nvme device support for call back functions scan_finished target_alloc,slave_alloc,target destroy and slave destroy. a) During scan, pcie devices are probed and added to SML to drivers internal list. b) target_alloc & slave alloc API's allocates resources for (MPT3SAS_TARGET & MPT3SAS_DEVICE) private datas and holds information like handle, target_id etc. c) slave_destroy & target_destroy are called when driver unregisters or removes device. Also frees allocated resources and info. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-11scsi: mpt3sas: Bump mpt3sas driver version to v16.100.00.00Sreekanth Reddy
Bump mpt3sas driver version to v16.100.00.00 Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-11scsi: mpt3sas: Display chassis slot information of the driveSreekanth Reddy
Display chassis slot information along with other drive location parameters such as slot number and connector name in the logs if chassis slot validity bit is set in 'SAS Enclosure Page 0'. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-11scsi: mpt3sas: Reduce memory footprint in kdump kernelSreekanth Reddy
To reduce the memory footprint of the driver in the kdump kernel, we apply the following settings when reset_devices is set: 1. Use single MSI-x vector. 2. Disable RDPQ mode. 3. Set sg_table_size to 32 by default. 4) Set SCSI IO Queue depth to 200. [mkp: fixed commit message] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: mpt3sas: fix format overflow warningArnd Bergmann
We print the driver name into one string and then add and ID and copy it into a second string of the same length, at which point gcc complains about a possible overflow: drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_probe': drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: error: '_cm' directive writing 3 bytes into a region of size between 1 and 32 [-Werror=format-overflow=] printf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id); ^~~~~~~~~ drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: note: directive argument in the range [0, 255] drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:2: note: 'sprintf' output between 5 and 38 bytes into a destination of size 32 sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Making the first string shorter is sufficient to avoid the warning here, as we know it can only contain either "mpt2sas" or "mpt3sas". Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08scripts/spelling.txt: add regsiter -> register spelling mistakeStephen Boyd
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-01scsi: mpt3sas: Avoid sleeping in interrupt contextBart Van Assche
Commit 669f044170d8 ("scsi: srp_transport: Move queuecommand() wait code to SCSI core") can make scsi_internal_device_block() sleep. However, the mpt3sas driver can call this function from an interrupt handler. Hence add a second argument to scsi_internal_device_block() that restores the old behavior of this function for the mpt3sas handler. The call chain that triggered an "IRQ handler enabled interrupts" complaint is as follows: _base_interrupt() -> _base_async_event() -> mpt3sas_scsih_event_callback() -> _scsih_check_topo_delete_events() -> _scsih_block_io_to_children_attached_directly() -> _scsih_block_io_device() -> _scsih_internal_device_block() -> scsi_internal_device_block() Reported-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Omar Sandoval <osandov@osandov.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Christoph Hellwig <hch@lst.de> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <stable@vger.kernel.org> # v4.10+ Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-23scsi: mpt3sas: switch to pci_alloc_irq_vectorsHannes Reinecke
Cleanup the MSI-X handling allowing us to use the PCI-layer provided vector allocation. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-01-31scsi: mpt3sas: Updating driver version to v15.100.00.00Chaitra P B
Updated driver version to "15.100.00.00" Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31scsi: mpt3sas: Fix for Crusader to achieve product targets with SAS devices.Chaitra P B
Small glitch/degraded performance in Crusader is improved with SAS drives by removing unnecessary spinlocks while clearing scsi command in drivers internal lookup table. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: mpt3sas: fix hang on ata passthrough commandsJames Bottomley
mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f044170d8933c3d66d231b69ea97cb8447338 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: mpt3sas: Recognize and act on iopriority infoAdam Manzanares
This patch adds support for request iopriority handling in the mpt3sas layer. This works only when a ATA device is behind the SATL. The ATA device also has to indicate that it supports command priorities in the identify information that is pulled from the SATL. Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Bump driver version as "14.101.00.00"Suganath Prabu Subramani
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Use the new MPI 2.6 32-bit Atomic Request Descriptors for ↵Suganath Prabu Subramani
SAS35 devices. Support Atomic Request Descriptors for Ventura/SAS35 devices. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Increased/Additional MSIX support for SAS35 devices.Suganath Prabu Subramani
For SAS35 devices MSIX vectors are inceased to 128 from 96. To support this Reply post host index register count is increased to 16. Also variable msix96_vector is replaced with combined_reply_queue and variable combined_reply_index_count is added to set different values for SAS3 and SAS35 devices. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Added Device ID's for SAS35 devices and updated MPI header.Suganath Prabu Subramani
Added Device ID's for SAS35 devices (Ventura, Crusader, Harpoon & Tomcat) and updated mpi header file for the same. Also added "is_gen35_ioc" to MPT3SAS_ADAPTER structure for identifying SAS35 adapters. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Bump driver version as "14.100.00.00"Suganath Prabu Subramani
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Remove unused macro "MPT_DEVICE_TLR_ON"Suganath Prabu Subramani
Removing macro "MPT_DEVICE_TLR_ON" defined in header file as its unused Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL pathSuganath Prabu Subramani
When device missing event arrives, device_remove_in_progress bit will be set and hence driver has to stop sending IOCTL commands.Now the check has been added in IOCTL path to test device_remove_in_progress bit is set, if so then IOCTL will be failed printing failure message. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08mpt3sas: Eliminate dead sleep_flag codeCalvin Owens
With the exception of a single call to wait_for_doorbell_int(), all this conditional sleeping code is dead. So delete it. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08mpt3sas: Eliminate conditional locking in mpt3sas_scsih_issue_tm()Calvin Owens
This flag that conditionally acquires the mutex is confusing and prone to bugginess: refactor it into two separate function calls, and make the unlocked one complain if it's called outside the mutex. Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08mpt3sas: Ensure the connector_name string is NUL-terminatedCalvin Owens
We blindly trust the hardware to give us NUL-terminated strings, which is a bad idea because it doesn't always do that. For example: [ 481.184784] mpt3sas_cm0: enclosure level(0x0000), connector name( \x3) In this case, connector_name is four spaces. We got lucky here because the 2nd byte beyond our character array happens to be a NUL. Fix this by explicitly writing '\0' to the end of the string to ensure we don't run off the edge of the world in printk(). Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMsChaitra P B
Replaced mpt3sas_base_flush_reply_queues() with mpt3sas_base_sync_reply_irqs(),as mpt3sas_base_flush_reply_queues() skips over reply queues that are currently busy (i.e. being handled by interrupt processing in another core). If a reply queue is busy, then call to synchronize_irq()in mpt3sas_base_sync_reply_irqs()make sures the other core has finished flushing the queue and completed any calls to the mid-layer scsi_done() routine. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Set maximum transfer length per IO to 4MB for VDsChaitra P B
Set maximum transfer length per IO on RAID volumes to 4MB by setting VD's queue's max_sector to 8192. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11mpt3sas: Updating mpt3sas driver version to 13.100.00.00Chaitra P B
Bump mpt3sas driver version from 12.100.00.00 to 13.100.00.00 Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTSMing Lin
Rename SCSI_MAX_SG_SEGMENTS to SG_CHUNK_SIZE, which means the amount we fit into a single scatterlist chunk. Rename SCSI_MAX_SG_CHAIN_SEGMENTS to SG_MAX_SEGMENTS. Will move these 2 generic definitions to scatterlist.h later. Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Bart Van Assche <bart.vanassche@sandisk.com> (for ib_srp changes) Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Updating mpt3sas driver version to 12.100.00.00Suganath prabu Subramani
Bump mpt3sas driver version from 09.102.00.00 to 12.100.00.00 Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of ↵Suganath prabu Subramani
timedout IO. Track msix of each IO and use the same msix for issuing abort to timed out IO. With this driver will process IO's reply first followed by TM. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Add support for configurable Chain Frame SizeSuganath prabu Subramani
Added support for configurable Chain Frame Size. Calculate the Chain Message Frame size from the IOCMaxChainSegementSize (iocfacts). Applicable only for mpt3sas/SAS3.0 HBA's. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Make use of additional HighPriority credit message frames for ↵Suganath prabu Subramani
sending SCSI IO's Driver assumes HighPriority credit as part of Global credit. But, Firmware treats HighPriority credit value and global cedits as two different values. Changed host queue algorithm to treat global credits and highPriority credits as two different values. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23mpt3sas: Never block the Enclosure deviceSuganath prabu Subramani
Never block the SEP device (i.e. Never invoke the scsi_internal_device_block() API for SEP device) even for the delay not responding events. Blocking the SEP device will create a deadlock while adding any device to the OS. Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com> Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-12mpt3sas: fix inline markers on non inline function declarationsStephen Rothwell
After merging the scsi tree, today's linux-next build (powerpc allyesconfig) failed like this: In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done': drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here if (mpt3sas_scsi_direct_io_get(ioc, smid) && ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5 9:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ Presumably caused by commit c84b06a48c4d ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-11mpt3sas: Bump mpt3sas driver version to 09.102.00.00Sreekanth Reddy
Bump mpt3sas driver version to 09.102.00.00 Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>