summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpi3mr
AgeCommit message (Collapse)Author
2022-09-25scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernelsSreekanth Reddy
In RT kernels, the IRQ handler's code is executed as a kernel thread. Modify the driver to avoid explicitly scheduling the IRQ kernel thread. Link: https://lore.kernel.org/r/20220912135742.11764-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Support new power management frameworkSreekanth Reddy
Switch to the new generic PCI power management framework. Also, remove unnecessary calls to the PCI helper functions (such as pci_set_power_state(), pci_enable_wake(), pci_save_state(), pci_restore_state() etc). Link: https://lore.kernel.org/r/20220912135742.11764-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Update mpi3 header filesSreekanth Reddy
Update the mpi3 header files. Link: https://lore.kernel.org/r/20220912135742.11764-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: mpi3mr: Fix error code in mpi3mr_transport_smp_handler()Dan Carpenter
The error code from mpi3mr_post_transport_req() is supposed to be passed to bsg_job_done(job, rc, reslen), but it isn't. Link: https://lore.kernel.org/r/YyMISJzVDARpVwrr@kili Fixes: 176d4aa69c6e ("scsi: mpi3mr: Support SAS transport class callbacks") Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: mpi3mr: Fix error codes in mpi3mr_report_manufacture()Dan Carpenter
There are three error paths which return success: 1) Propagate the error code from mpi3mr_post_transport_req() if it fails. 2) Return -EINVAL if "ioc_status != MPI3_IOCSTATUS_SUCCESS". 3) Return -EINVAL if "le16_to_cpu(mpi_reply.response_data_length) != sizeof(struct rep_manu_reply)" Link: https://lore.kernel.org/r/YyMIJh1HU2Qz9+Rs@kili Fixes: 2bd37e284914 ("scsi: mpi3mr: Add framework to issue MPT transport cmds") Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: mpi3mr: Block I/Os while refreshing target dev objectsSreekanth Reddy
Block the I/Os on the target devices until corresponding target device's target dev objects are refreshed as part of post controller reset operation. Link: https://lore.kernel.org/r/20220804131226.16653-16-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: mpi3mr: Refresh SAS ports during soft resetSreekanth Reddy
Update the host's SAS ports if there is change in port id or phys. If the port id is changed, then the driver updates it. If some phys are enabled/disabled during reset, then driver updates them in STL. Check for the responding expander devices and update the device handle if it got changed. Register the expander with STL if it got added during reset and unregister the expander device if it got removed during reset. [mkp: include fix for zeroday warning] Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Support SAS transport class callbacksSreekanth Reddy
Add support for the following SAS transport class callbacks: - get_linkerrors - get_enclosure_identifier - get_bay_identifier - phy_reset - phy_enable - set_phy_speed - smp_handler Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to issue MPT transport cmdsSreekanth Reddy
Add framework to issue MPT transport commands to controllers. Also issue the MPT transport commands to get the manufacturing info of SAS expander device. Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add SAS SATA end devices to STLSreekanth Reddy
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL) whenever the corresponding device is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Get target object based on rphySreekanth Reddy
When device is registered with the STL then get the corresponding device's target object using the rphy in below callback functions: - mpi3mr_target_alloc() - mpi3mr_slave_alloc() - mpi3mr_slave_configure() - mpi3mr_slave_destroy() Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add expander devices to STLSreekanth Reddy
Register/unregister the expander devices to SCSI Transport Layer(STL) whenever the corresponding expander is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable STL on HBAs where multipath is disabledSreekanth Reddy
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if multipath capability is disabled in the controller's firmware. Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to manage device's portSreekanth Reddy
Add the following helper functions: - Update the host phys with STL - Remove the device's SAS port with STL Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to retrieve device objectsSreekanth Reddy
Add the following helper functions: - Get the device's sas address by reading corresponding device's Device page0 - Get the expander object from expander list based on expander's handle - Get the target device object from target device list based on device's sas address - Get the expander device object from expander list based on expanders's sas address - Get hba port object from hba port table list based on port's port id Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to add phys to STLSreekanth Reddy
Add framework to register and unregister the host and expander phys with SCSI Transport Layer (STL). Link: https://lore.kernel.org/r/20220804131226.16653-6-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable Enclosure device add eventSreekanth Reddy
Enable and process the Enclosure device add event. Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to retrieve config pagesSreekanth Reddy
Add helper functions to retrieve below controller's config pages: - SAS IOUnit Page0 - SAS IOUnit Page1 - Driver Page1 - Device Page0 - SAS Phy Page0 - SAS Phy Page1 - SAS Expander Page0 - SAS Expander Page1 - Enclosure Page0 Also add the helper function to set SAS IOUnit Page1. Link: https://lore.kernel.org/r/20220804131226.16653-4-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to issue config requestsSreekanth Reddy
Add framework to issue config requests commands to controller firmware. Link: https://lore.kernel.org/r/20220804131226.16653-3-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add config and transport related debug flagsSreekanth Reddy
Add config and transport request related error & info debug flags and functions. Link: https://lore.kernel.org/r/20220804131226.16653-2-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
2022-07-18scsi: mpi3mr: Delete a stray tabDan Carpenter
This code is indented one more tab than it should be. Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Unlock on error pathDan Carpenter
There is some clean up necessary before returning. Smatch complains: drivers/scsi/mpi3mr/mpi3mr_fw.c:4786 mpi3mr_soft_reset_handler() warn: inconsistent returns '&mrioc->reset_mutex'. Locked on : 4730 Unlocked on: 4786 Link: https://lore.kernel.org/r/YtVCEsxMU8buuMjP@kili Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Reduce VD queue depth on detecting throttlingSreekanth Reddy
Reduce the VD queue depth on detecting the throttling condition. [mkp: incorporate fix for pointer cast issue reported by the test robot and Guenter Roeck] Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: mpi3mr: Resource Based MeteringSreekanth Reddy
Update driver to track cumulative pending large data size at the controller level and at the throttle group level. When one of the values meet or exceed the controller's firmware-determined high threshold value, then the driver will divert future selective I/O to the firmware. Once both controller level and at the throttle group level cumulative pending large data size reach controller's firmware determined low threshold value, then the driver will stop diverting I/Os to the firmware. Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: mpi3mr: Increase cmd_per_lun to 128Sreekanth Reddy
Increase cmd_per_lun to 128. Link: https://lore.kernel.org/r/20220628074848.5036-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-07scsi: mpi3mr: Enable shared host tagsetSreekanth Reddy
Enable shared host tagset to make sure that total outstanding I/O count can not exceed controller's can_queue setting. Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-06blk-mq: Drop 'reserved' arg of busy_tag_iter_fnJohn Garry
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter function so it may be dropped. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-01scsi: mpi3mr: Fix kernel-docJiapeng Chong
Fix the following W=1 kernel warnings: drivers/scsi/mpi3mr/mpi3mr_app.c:1706: warning: expecting prototype for adapter_state_show(). Prototype was for adp_state_show() instead. Link: https://lore.kernel.org/r/20220525093514.55467-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-01scsi: mpi3mr: Rework mrioc->bsg_device model to fix warningsSumit Saxena
During driver unload, mrioc->bsg_device reference count becomes negative. Also, as reported in [1], the driver's bsg_device model had few more bugs. Fix all these up. [1] https://marc.info/?l=linux-scsi&m=165183971411991&w=2 Link: https://lore.kernel.org/r/20220526170157.58274-1-sumit.saxena@broadcom.com Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: mpi3mr: Add target device related sysfs attributesSreekanth Reddy
Add sysfs attributes for exposing target device details such as SAS address, firmware device handle, and persistent ID for the controller-attached devices and RAID volumes. Link: https://lore.kernel.org/r/20220517115310.13062-3-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: mpi3mr: Add shost related sysfs attributesSreekanth Reddy
Add shost related sysfs attributes to display the controller's firmware version, queue depth, number of requests, and number of reply queues. Also add an attribute to set & get the logging_level. Link: https://lore.kernel.org/r/20220517115310.13062-2-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: mpi3mr: Return error if dma_alloc_coherent() failsDan Carpenter
Return -ENOMEM instead of success if dma_alloc_coherent() fails. Link: https://lore.kernel.org/r/YnOmMGHqCOtUCYQ1@kili Fixes: 43ca11005098 ("scsi: mpi3mr: Add support for PEL commands") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-16scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()Dan Carpenter
The bsg_setup_queue() function does not return NULL. It returns error pointers. Fix the check accordingly. Link: https://lore.kernel.org/r/YnUf7RQl+A3tigWh@kili Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Return I/Os to an unrecoverable HBA with DID_ERRORSreekanth Reddy
Complete all new I/O requests issued to an unrecoverable controller with DID_ERROR status instead of returning the I/O requests with SCSI_MLQUEUE_HOST_BUSY. This will prevent the infinite retries of the new I/Os when a controller is in an unrecoverable state. Link: https://lore.kernel.org/r/20220505184808.24049-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Hidden drives not removed during soft resetSreekanth Reddy
If any drive is missing during reset, the driver checks whether the device is exposed to the OS. If it is, then it removes the device from the OS and its own internal list. For hidden devices, even if they are found as missing during reset, the driver is not removing them from its internal list. Modify driver to remove hidden devices from the driver's target device list if they are missing during soft reset. Link: https://lore.kernel.org/r/20220505184808.24049-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-10scsi: mpi3mr: Increase I/O timeout value to 60sSreekanth Reddy
Set each SCSI device's default I/O timeout and default error handling I/O timeout to 60s. Link: https://lore.kernel.org/r/20220505184808.24049-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Update driver version to 8.0.0.69.0Sumit Saxena
Link: https://lore.kernel.org/r/20220429211641.642010-9-sumit.saxena@broadcom.com Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for NVMe passthroughSumit Saxena
Add support for management applications to send an MPI3 Encapsulated NVMe passthru command to the NVMe devices attached to an Avenger controller. Since the NVMe drives are exposed as SCSI devices by the controller, the standard NVMe applications cannot be used to interact with the drives and the command sets supported are also limited by the controller firmware. Special handling is required for MPI3 Encapsulated NVMe passthru commands for PRP/SGL setup in the commands. Link: https://lore.kernel.org/r/20220429211641.642010-8-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Expose adapter state to sysfsSumit Saxena
Link: https://lore.kernel.org/r/20220429211641.642010-7-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for PEL commandsSumit Saxena
Implement driver support for management applications to enable persistent event log (PEL) notifications. Upon receipt of events, the driver will increment a sysfs variable named event_counter. The management application will poll for event_counter value changes and signal the application about events. Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for MPT commandsSumit Saxena
There are certain management commands which require firmware intervention. These commands are termed MPT commands. Add support for them. Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Move data structures/definitions from MPI headers to uapi headerSumit Saxena
This patch moves the data structures/definitions which are used by userspace applications from MPI headers to uapi/scsi/scsi_bsg_mpi3mr.h Link: https://lore.kernel.org/r/20220429211641.642010-4-sumit.saxena@broadcom.com Reported by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add support for driver commandsSumit Saxena
There are certain bsg commands which need to be completed by the driver without involving firmware. These requests are termed driver commands. Add support for these. Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com Reported by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpi3mr: Add bsg device supportSumit Saxena
Create bsg device per controller for controller management purposes. bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1, etc. Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...
2022-02-22scsi: mpi3mr: Fix flushing !WQ_MEM_RECLAIM events warningSreekanth Reddy
Fix the following warning by not allocating driver's event handling worker queue with WQ_MEM_RECLAIM flag enabled: workqueue: WQ_MEM_RECLAIM mpi3mr_fwevt_worker [mpi3mr] is flushing !WQ_MEM_RECLAIM events Link: https://lore.kernel.org/r/20220218180515.27455-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-17treewide: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This code was transformed with the help of Coccinelle: (next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch) @@ identifier S, member, array; type T1, T2; @@ struct S { ... T1 member; T2 array[ - 0 ]; }; UAPI and wireless changes were intentionally excluded from this patch and will be sent out separately. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2022-02-11scsi: mpi3mr: Bump driver version to 8.0.0.68.0Sreekanth Reddy
Bump mpi3mr driver version to 8.0.0.68.0. Link: https://lore.kernel.org/r/20220210095817.22828-10-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 11:57:51 +0000