summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_init.c
AgeCommit message (Collapse)Author
2015-12-21lpfc: Fix driver crash when module parameter lpfc_fcp_io_channel set to 16James Smart
Fix driver crash when module parameter lpfc_fcp_io_channel set to 16 Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-10-27lpfc: Add support for Lancer G6 and 32G FC linksJames Smart
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: remove set but not used variablesSebastian Herbszt
Remove set but not used variables. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27Fix kmalloc overflow in LPFC driver at large core countIan Mitchell
This patch allows the LPFC to start up without a fatal kernel bug based on an exceeded KMALLOC_MAX_SIZE and a too large NR_CPU-based maskbits field. The bug was based on the number of CPU cores in a system. Using the get_cpu_mask() function declared in kernel/cpu.c allows the driver to load on the community kernel 4.2 RC1. Below is the kernel bug reproduced: 8<-------------------------------------------------------------------- 2199382.828437 ( 0.005216)| lpfc 0003:02:00.0: enabling device (0140 -> 0142) 2199382.999272 ( 0.170835)| ------------[ cut here ]------------ 2199382.999337 ( 0.000065)| WARNING: CPU: 84 PID: 404 at mm/slab_common.c:653 kmalloc_slab+0x2f/0x89() 2199383.004534 ( 0.005197)| Modules linked in: lpfc(+) usbcore(+) mptctl scsi_transport_fc sg lpc_ich i2c_i801 usb_common tpm_tis mfd_core tpm acpi_cpufreq button scsi_dh_alua scsi_dh_rdacusbcore: registered new device driver usb 2199383.020568 ( 0.016034)| 2199383.020581 ( 0.000013)| scsi_dh_hp_sw scsi_dh_emc scsi_dh gru thermal sata_nv processor piix fan thermal_sysehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2199383.035288 ( 0.014707)| 2199383.035306 ( 0.000018)| hwmon ata_piix 2199383.035336 ( 0.000030)| CPU: 84 PID: 404 Comm: kworker/84:0 Not tainted 3.18.0-rc2-gat-00106-ga7ca10f-dirty #178 2199383.047077 ( 0.011741)| ehci-pci: EHCI PCI platform driver 2199383.047134 ( 0.000057)| Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 2199383.056245 ( 0.009111)| Workqueue: events work_for_cpu_fn 2199383.066174 ( 0.009929)| 000000000000028d ffff88eef827bbe8 ffffffff815a542f 000000000000028d 2199383.069545 ( 0.003371)| ffffffff810ea142 ffff88eef827bc28 ffffffff8104365c ffff88eefe4006c8 2199383.076214 ( 0.006669)| 0000000000000000 00000000000080d0 0000000000000000 0000000000000004 2199383.079213 ( 0.002999)| Call Trace: 2199383.084084 ( 0.004871)| [<ffffffff815a542f>] dump_stack+0x49/0x62 2199383.087283 ( 0.003199)| [<ffffffff810ea142>] ? kmalloc_slab+0x2f/0x89 2199383.091415 ( 0.004132)| [<ffffffff8104365c>] warn_slowpath_common+0x77/0x92 2199383.095197 ( 0.003782)| [<ffffffff8104368c>] warn_slowpath_null+0x15/0x17 2199383.103336 ( 0.008139)| [<ffffffff810ea142>] kmalloc_slab+0x2f/0x89 2199383.107082 ( 0.003746)| [<ffffffff8110fd9e>] __kmalloc+0x13/0x16a 2199383.112531 ( 0.005449)| [<ffffffffa01a8ed9>] lpfc_pci_probe_one_s4+0x105b/0x1644 [lpfc] 2199383.115316 ( 0.002785)| [<ffffffff81302b92>] ? pci_bus_read_config_dword+0x75/0x87 2199383.123431 ( 0.008115)| [<ffffffffa01a951f>] lpfc_pci_probe_one+0x5d/0xcb5 [lpfc] 2199383.127364 ( 0.003933)| [<ffffffff81497119>] ? dbs_check_cpu+0x168/0x177 2199383.136438 ( 0.009074)| [<ffffffff81496fa5>] ? gov_queue_work+0xb4/0xc0 2199383.140407 ( 0.003969)| [<ffffffff8130b2a1>] local_pci_probe+0x1e/0x52 2199383.143105 ( 0.002698)| [<ffffffff81052c47>] work_for_cpu_fn+0x13/0x1b 2199383.147315 ( 0.004210)| [<ffffffff81054965>] process_one_work+0x222/0x35e 2199383.151379 ( 0.004064)| [<ffffffff81054e76>] worker_thread+0x3d5/0x46e 2199383.159402 ( 0.008023)| [<ffffffff81054aa1>] ? process_one_work+0x35e/0x35e 2199383.163097 ( 0.003695)| [<ffffffff810599c6>] kthread+0xc8/0xd2 2199383.167476 ( 0.004379)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.176434 ( 0.008958)| [<ffffffff815a8cac>] ret_from_fork+0x7c/0xb0 2199383.180086 ( 0.003652)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.192333 ( 0.012247)| ehci-pci 0000:00:1a.0: EHCI Host Controller -------------------------------------------------------------------->8 The proposed solution was approved by James Smart at Emulex and tested on a UV2 machine with 6144 cores. With the fix, the LPFC module loads with no unwanted effects on the system. Signed-off-by: Ian Mitchell <imitchell@sgi.com> Signed-off-by: Alex Thorlton <athorlton@sgi.com> Suggested-by: Robert Elliot <elliott@hp.com> [james.smart: resolve unused variable warning] Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: Destroy lpfc_hba_index IDR on module exitJohannes Thumshirn
Destroy lpfc_hba_index IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: in sli3 use configured sg_seg_cnt for sg_tablesizeBodo Stroesser
Currently the module parameter lpfc_sg_seg_count does not have effect for sli3 devices. In lpfc_sli_driver_resource_setup(), which is used for sli3, the code writes the configured sg_seg_cnt into lpfc_template.sg_tablesize. But lpfc_template is the template used for sli4 only. Thus the value should correctly be written to lpfc_template_s3->sg_tablesize. This patch is for kernel 4.1-rc5, but is tested with lpfc 10.2.405.26 only. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: Remove unnessary castFiro Yang
kzalloc() returns a void pointer - no need to cast it in drivers/scsi/lpfc/lpfc_init.c::lpfc_sli_driver_resource_setup() Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: fix model descriptionSebastian Herbszt
Remove trailing space from model description. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13lpfc: Add support for using block multi-queueJames Smart
With blk-mq support in the mid-layer, lpfc can do IO steering based on the information in the request tag. This patch allows lpfc to use blk-mq if enabled. If not enabled, we fall back into the emulex-internal affinity mappings. This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing scsi_mod.use_blk_mq=Y as a parameter to the kernel. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-05lpfc: Fix crash in vport_delete.James Smart
We inadvertantly took the path to recreate the vport while in a driver teardown path Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-05lpfc: Fix to remove IRQF_SHARED flag for MSI/MSI-X vectors.James Smart
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-05lpfc: Add support for ELS LCB.James Smart
Also has a little whitespace fixing. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Update copyright to 2015James Smart
Update copyright to 2015 Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix premature release of rpi bit in bitmaskJames Smart
Currently, the driver plays off the fact that older sli4 adapters have a different rpi access pattern that allowed for the rpi reference to be released earlier in the teardown sequence, allowing the driver to recycle the rpi value sooner. Newer sli4 adapters have a different access pattern that requires us to wait for a later mailbox completion. This changes the put call location on the newer sli4 adapters. Symptoms of the error are "0110 ELS" and the "0372 iotag" errors. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Parse the new 20G, 25G and 40G link speeds in the lpfc driverJames Smart
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix setting of EQ (interrupt) delay MultiplierJames Smart
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix host reset escalation killing all IOs.James Smart
Fix host reset escalation killing all IOs. SLI-3 adapters will use a new host template. The template differs from SLI-4 adapters in that it does not have an eh_host_reset_handler. Lpfc has traditionally never had a host_reset. The host reset handler was added when we ran into a stuck hardware condition on a SLI-4 adapter. The host_reset will reset and reinit the pci function, clearing the hardware condition. Unfortunately, the host reset handler uses attach/detach code paths, which makes scsi_add_host() and scsi_remove_host() calls. Meaning, a host_reset will completely remove the scsi_host from the system. As a new call to scsi_add_host() is made, the shost# changes, which results in completely new scsi_devices and device names. All the older scsi devices on the old shost# are now orphaned and unrecoverable. We realize we need to re-implement the host_reset_handler so the scsi_host stays registered across the host_reset, but that will be a rather lengthy effort. In the short term, we had an immediate need to restore the SLI-3 devices to their working behavior, with the easiest path being to remove their host_reset handler. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Add Lancer Temperature Event support to the lpfc driverJames Smart
This will detect and send an async event if overtemp is detected Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix the iteration count to match the 30 sec comment in the routine ↵James Smart
lpfc_pci_function_reset Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-09-16lpfc: fix low priority issues from fortify source code scanJames Smart
Fixed Low priority issues from lpfc given by fortify source code scan. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: fix high priority issues from fortify source code scanJames Smart
Fixed High priority issues from lpfc given by fortify source code scan. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: fix IP Reset processing - wait for RDY before proceedingJames Smart
Fix IP Reset processing - wait for RDY before proceeding Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: fix discovery timeout during nameserver loginJames Smart
Fix discovery timeout during nameserver login Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Reviewed-by: James Smart <james.smart@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: use dma_zalloc_coherentJoe Perches
Use the zeroing function instead of dma_alloc_coherent & memset(,0,) Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: James Smart <james.smart@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16lpfc: mark functions as static in lpfc/lpfc_init.cRashika Kheria
Mark functions as static in lpfc/lpfc_init.c because they are not used outside this file. This eliminates the following warning in lpfc/lpfc_init.c: drivers/scsi/lpfc/lpfc_init.c:652:1: warning: no previous prototype for ‘lpfc_hba_init_link’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_init.c:753:1: warning: no previous prototype for ‘lpfc_hba_down_link’ [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_init.c:3434:1: warning: no previous prototype for ‘lpfc_sli4_fcf_redisc_wait_tmo’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: James Smart <james.smart@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29lpfc: Remove superfluous call to pci_disable_msix()Alexander Gordeev
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: mark old devices as obsoleteJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix for cleaning up stale ring flag and sp_queue_event entriesJames Smart
Fix for cleaning up stale ring flag and sp_queue_event entries. Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Update Copyright on changed filesJames Smart
Update Copyright on changed files Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Convert runtime references to old xlane cfg param to fof cfg paramJames Smart
Convert runtime references to old xlane cfg param to fof cfg param Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lockJames Smart
Fix SLI4 s abort loop to process all FCP rings and under ring_lock Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fixed kernel panic in lpfc_abort_handlerJames Smart
Fixed kernel panic in lpfc_abort_handler Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix locking for postbufq when freeingJames Smart
Fix locking for postbufq when freeing Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix locking for lpfc_hba_down_postJames Smart
Fix locking for lpfc_hba_down_post Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] lpfc 8.3.45: Fixed crash during driver unload.James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.45: Fixed driver error messages after firmware downloadJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.45: Fix sysfs buffer overrun in read of lpfc_fcp_cpu_map for ↵James Smart
128 CPUs. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.45: Incorporated support of a low-latency io pathJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] lpfc 8.3.44: Fix kernel panics from corrupted ndlp listJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-10-25[SCSI] lpfc: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: Jon Mason <jdmason@kudzu.us> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-14SCSI: remove unnecessary pci_set_drvdata()Jingoo Han
Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound), the driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-10[SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage.James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-10[SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloadsJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-10[SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute ↵James Smart
WQ/RQ pci bar selection Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-10[SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logicJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-10[SCSI] lpfc 8.3.42: Fixed not able to log informational messages at early ↵James Smart
stage of driver init time Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26[SCSI] lpfc: Removed obsolete fcp_eq_count and fcp_wq_count driver attributesJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed support for 128 byte WQEsJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:57:05 +0000