| Age | Commit message (Collapse) | Author |
|---|
|
When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure. This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.
Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state. This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.
Fixes: db651ec22524 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230523183206.7728-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
lpfc_nlp_not_used()
Smatch detected a double free path because lpfc_nlp_not_used() releases an
ndlp object before reaching lpfc_nlp_put() at the end of
lpfc_cmpl_els_logo_acc().
Remove the outdated lpfc_nlp_not_used() routine. In
lpfc_mbx_cmpl_ns_reg_login(), replace the call with lpfc_nlp_put(). In
lpfc_cmpl_els_logo_acc(), replace the call with lpfc_unreg_rpi() and keep
the lpfc_nlp_put() at the end of the routine. If ndlp's rpi was
registered, then lpfc_unreg_rpi()'s completion routine performs the final
ndlp clean up after lpfc_nlp_put() is called from lpfc_cmpl_els_logo_acc().
Otherwise if ndlp has no rpi registered, the lpfc_nlp_put() at the end of
lpfc_cmpl_els_logo_acc() is the final ndlp clean up.
Fixes: 4430f7fd09ec ("scsi: lpfc: Rework locations of ndlp reference taking")
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/Y3OefhyyJNKH%2Fiaf@kili/
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230417191558.83100-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Extended status reason code errors should mask off the IOERR_PARAM_MASK
before checking strict equalities for IOERR values.
Update the lpfc_error_lost_link() routine as such.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A fabric controller can sometimes send an RDP request right before a link
down event. Because of this outstanding RDP request, the driver does not
remove the last reference count on its ndlp causing a potential leak of RPI
resources when devloss tmo fires.
In lpfc_cmpl_els_rsp(), modify the NPIV clause to always allow the
lpfc_drop_node() routine to execute when not registered with SCSI
transport.
This relaxes the contraint that an NPIV ndlp must be in a specific state in
order to call lpfc_drop node. Logic is revised such that the
lpfc_drop_node() routine is always called to ensure the last ndlp decrement
occurs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When mapped to a target with multiple virtual ports, a link bounce
sometimes results in unsuccessful rediscovery of all of the target's
virtual ports. This is because a succession of repeat RSCNs for the
virtual target ports leaves ndlps in the REG_LOGIN state with the
NLP_REG_LOGIN_SEND flag set. With NLP_REG_LOGIN_SEND set, during the next
PLOGI, the driver will UNREG_RPI. When UNREG_RPI is processed, the driver
can be in the middle of PRLI_ISSUE or MAPPED state resulting in an illegal
state transition by the discovery engine and stalling.
Fix by calling the discovery state machine with DEVICE_RECOVERY event
during RSCN processing. This will set the NLP_IGNR_REG_CMPL bit and
prevent the old REG_LOGIN state from advancing. Then for the new PLOGI
issue, add the check for the NLP_IGNR_REG_CMPL bit to delay issuing the new
PLOGI until the queued REG_LOGIN and UNREG_LOGIN have been processed.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A target vendor array reboot in P2P topology can sometimes result in
unsuccessful rediscovery.
Rework the lpfc_cmpl_els_logo() routine such that when the LOGO completes
as a failure because of driver abort, the LOGO state is still recorded with
the discovery state machine.
This is a small rework to set LOGO completion without forcing a device
removal state change.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the repeated word "the" in comments.
[mkp: fixed additional typos in the changed lines]
Link: https://lore.kernel.org/r/20230217083046.4090-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The LLDD and the stack currently process FPINs received from the fabric,
but the stack is not aware of any action taken by the driver to alleviate
congestion. The current interface between the driver and the SCSI stack is
limited to passing the notification mainly for statistics and heuristics.
The reaction to an FPIN could be handled either by the driver or by the
stack (marginal path and failover). Amend the interface to indicate if
action on an FPIN has already been reacted to by the LLDDs or not. Add an
additional flag to fc_host_fpin_rcv() to indicate if the FPIN has been
acknowledged/reacted to by the driver.
Also added a new event code FCH_EVT_LINK_FPIN_ACK to notify to the user
that the event has been acknowledged/reacted by the LLDD driver
Link: https://lore.kernel.org/r/20230209034326.882514-1-muneendra.kumar@broadcom.com
Co-developed-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Co-developed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Muneendra <muneendra.kumar@broadcom.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update copyrights to 2023 for files modified in the 14.2.0.10 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After enabling VMID, an issue LIP test was erasing fabric switch VMID
information.
Introduce a lpfc_reinit_vmid() routine, which reinitializes all VMID data
structures upon FLOGI completion in fabric topology.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In a large SAN testing configuration, frequent target port toggle tests are
occasionally resulting in missing lun path rediscoveries. An outstanding
PRLI can be inflight when a target RSCN dissappearance occurs, causing the
driver to retry PRLIs using invalid rpi contexts.
Fix by verifying that an ndlp's state was not restarted from PRLI_ISSUE
due to an intermediate RSCN. If not in a valid state, early exit PRLI
completion handling.
The last follow up RSCN indicating target reappearance retriggers
PLOGI/PRLI with a valid rpi context and is expected to succeed in LUN path
rediscovery.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a FLOGI completes with a sequence timeout error, a freed kref ptr
dereference crash can occur due to a timing race involving ndlp referencing
in lpfc_dev_loss_tmo_callbk.
Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss
is active. Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the
FLOGI is retried to allow the driver to handle the reference counts
correctly in lpfc_dev_loss_tmo_handler.
Reported-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Tested-by: Dietmar Hahn <dietmar.hahn@fujitsu.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221116011921.105995-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pointer lp is being initialized and incremented but the result is never
read. The pointer is redundant and can be removed.
Once lp is removed, pcmd is not longer used. So remove pcmd as well
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Link: https://lore.kernel.org/r/20221108183620.93978-1-jsmart2021@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The DUMP_MEMORY mailbox command is implemented for page A0 and A2 to
retrieve transceiver information from firmware.
The mailbox command output is then formatted to print raw data values for
userspace to parse via sysfs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20221017164323.14536-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Firmware reports link degrade signaling via ACQES.
Handlers and new additions to the SET_FEATURES mbox command are implemented
so that link degrade parameters for 64GB capable links are reported through
EDC ELS frames.
Link: https://lore.kernel.org/r/20220911221505.117655-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
NPort ID
When a target makes the mistake of registering a FC4 type with the fabric,
but then rejects a PRLI of that type, the lpfc driver incorrectly retries
the PRLI causing multiple registrations with the transport. The driver
needs to detect the reject reason data and stop any retry.
Rework the PRLI reject scenarios.
Link: https://lore.kernel.org/r/20220911221505.117655-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The if statment check (prli_fc4_req & PRLI_NVME_TYPE) evaluates to true
when receiving a PRLI request for bogus FC4 type codes that happen to have
the 3rd or 5th bit set because PRLI_NVME_TYPE is 0x28. This leads to
sending a PRLI_NVME_ACC even for bogus FC4 type codes.
Change the bitwise & check to an exact == type code check to ensure we send
PRLI_NVME_ACC only for NVME type coded PRLI requests.
Link: https://lore.kernel.org/r/20220911221505.117655-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The Menlo/Hornet adapter was never released to the field. As such, driver
code specific to the adapter is unnecessary and should be removed.
Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The RSCN_MEMENTO logic was to workaround a target that does not register
both FCP and NVMe FC4 types at the same time. This caused the
configuration to not produce a second RSCN for the NVMe FC4 type
registration in a timely manner. The intention of the RSCN_MEMENTO flag
was to always signal to try NVMe PRLI.
However, there are other FCP-only target arrays in correctly behaved
configurations that reject the NVMe PRLI followed by a LOGO leading to
never rediscovering the target after an issue_lip (as LOGO causes a repeat
of PLOGI/PRLIs).
Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to
fail while it exists only to succeed on a misbehaved config.
Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com
Fixes: 1045592fc968 ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During a target link bounce test, the driver sees a mismatch between the
NPortId and the WWPN on the node structures (ndlps) involved. When this
occurs, the driver "swaps" the ndlp and new_ndlp node parameters to restore
WWPN/DID uniqueness in the fc_nodes list per vport. However, the driver
neglected to swap the nlp_fc4_type in the ndlp passed to
lpfc_plogi_confirm_nport causing a failure to recover the NVMe PLOGI/PRLI
and ultimately the NVMe paths.
Correct confirm_nport to preserve the fc4 types from the new-ndlp when the
data is moved over ot the ndlp structure.
Link: https://lore.kernel.org/r/20220701211425.2708-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A use-after-free crash can occur after an ELS LOGO is aborted.
Specifically, a nodelist structure is freed and then
ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the
discovery state machine is mistakenly called a second time with
NLP_EVT_DEVICE_RM argument.
Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a
nodelist structure.
Link: https://lore.kernel.org/r/20220603174329.63777-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
|
|
When configuring CMF management based on signals instead of FPINs, FPIN
alarm and warning statistics are not tracked.
Change the behavior so that FPIN alarms and warnings are always tracked
regardless of the configured mode.
Similar changes are made in the CMF signal stat accounting logic. Upon
receipt of a signal, only track signaled alarms and warnings. FPIN stats
should not be incremented upon receipt of a signal.
Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, VMID registration is configured via module parameters. This
could lead to VMID compatibility issues if two ports are connected to
different brands of switches, as the two brands implement VMID differently.
Make logical changes so that VMID registration is based on common service
parameters from FLOGI_ACC with fabric rather than module parameters.
Link: https://lore.kernel.org/r/20220506035519.50908-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In GID_PT mode with lpfc_ns_query=1, a race condition between iterating the
vport->fc_nodes list in lpfc_rscn_recovery_check() and cleanup of an ndlp
can trigger a crash while processing the RSCN of another initiator from the
same zone.
During iteration of the vport->fc_nodes list, an ndlp is cleaned up and
released. lpfc_dequeue_node() is called from lpfc_cleanup_node() leading to
a bad ndlp dereference in lpfc_rscn_recovery_check().
Change list_for_each_entry() to list_for_each_entry_safe() in
lpfc_rscn_recovery_check() to protect against removal of an initiator ndlp,
while walking the vport->fc_nodes list.
Link: https://lore.kernel.org/r/20220506035519.50908-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After running a short external loopback test, when the external loopback is
removed and a normal cable inserted that is directly connected to a target
device, the system oops in the llpfc_set_rrq_active() routine.
When the loopback was inserted an FLOGI was transmit. As we're looped back,
we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same
wppn thus understand it's a loopback. However, as the ABTS sends address
information the port is not set to (fffffe), the ABTS is dropped on the
wire. A short 1 frame loopback test is run and completes before the ABTS
times out. The looback is unplugged and the new cable plugged in, and the
an FLOGI to the new device occurs and completes. Due to a mixup in ref
counting the completion of the new FLOGI releases the fabric ndlp. Then the
original ABTS completes and references the released ndlp generating the
oops.
Correct by no-op'ing the ABTS when in loopback mode (it will be dropped
anyway). Added a flag to track the mode to recognize when it should be
no-op'd.
Link: https://lore.kernel.org/r/20220506035519.50908-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Code review, following every lpfc_nlp_get() call vs calls during error
handling, discovered cases of missing put calls.
Correct by adding ndlp kref puts in the respective error paths.
Also added comments to several of the error paths to record relationships
to reference counts.
Link: https://lore.kernel.org/r/20220506035519.50908-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The refactoring code converted context information from SLI-3 to SLI-4.
The conversion for the SLI-4 bit field tried to use the old (hacky) SLI3
high/low bit settings. Needless to say, it was incorrect.
Explicitly set the context field to type FCFI and set it in the wqe.
SLI-4 is now a proper bit field so no need for the shifting/anding.
Link: https://lore.kernel.org/r/20220506205528.61590-1-jsmart2021@gmail.com
Fixes: 6831ce129f19 ("scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path")
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The intention of this patch is to refactor mailbox memory allocation and
cleanup steps in one routine respectively to prevent memory leaks or memory
errors related to mailbox commands. There are trivial localized fixes as
well.
Provide lpfc_mbox_rsrc_prep() - this routine allocates the dmabuf and the
mbuf associated with it. It also catches allocation errors and returns
status.
Provide lpfc_mbox_rsrc_cleanup() - this routine verifies a dmabuf exists
and if so releases the associated mbuf and the dmabuf memory. It then sets
the ctx_buf to NULL and releases the mailbox memory to the mailbox pool.
Link: https://lore.kernel.org/r/20220412222008.126521-22-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The lpfc_iocbq data structure has void * pointers that are overloaded to be
as many as 8 different data types and the driver translates the void * by
casting. This patch removes the void * pointers by declaring the specific
types needed by the driver. It also expands the context_un to include more
seldom used pointer types to save structure bytes. It also groups the u8
types together to pack the 8 bytes needed. This work allows the lpfc_iocbq
data structure to be more strongly typed and keeps it from being allocated
from the 512 byte slab.
[mkp: rolled in zeroday fix]
Link: https://lore.kernel.org/r/20220412222008.126521-21-jsmart2021@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During an NVMe target reboot, the target may initialize itself as FCP only
during the first RSCN and shortly after trigger a second RSCN claiming NVMe
support. The timing of these RSCNs occur before FCP-PRLI for the first
RSCN completes leading discovery issues over NVMe.
Change RSCN and NVME-PRLI send logic based on a new FC_RSCN_MEMENTO flag
that signals when lpfc_end_rscn() is completed and serves as a memento that
discovery was started from RSCN.
Link: https://lore.kernel.org/r/20220412222008.126521-20-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The command IOCB ndlp pointer is overwritten in lpfc_issue_els_rdf(), and
the original ndlp pointer is stored ahead of time.
This null ptr assignment can be safely removed.
Link: https://lore.kernel.org/r/20220412222008.126521-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In P2P topology, a target controller reboot sometimes results in not
reestablishing a login because the ndlp is stuck in LOGO state.
Fix by transitioning to NPR state if we get link down before LOGO
completes.
Link: https://lore.kernel.org/r/20220412222008.126521-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If lpfc_sli_issue_iocb() fails, then the fc_prli_sent is never decremented.
Move the fc_prli_sent++ to after a guaranteed IOCB submit.
Link: https://lore.kernel.org/r/20220412222008.126521-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If lpfc_issue_els_flogi() fails and returns non-zero status, the node
reference count is decremented to trigger the release of the nodelist
structure. However, if there is a prior registration or dev-loss-evt work
pending, the node may be released prematurely. When dev-loss-evt
completes, the released node is referenced causing a use-after-free null
pointer dereference.
Similarly, when processing non-zero ELS PLOGI completion status in
lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport
registration before triggering node removal. If dev-loss-evt work is
pending, the node may be released prematurely and a subsequent call to
lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference.
Add test for pending dev-loss before decrementing the node reference count
for FLOGI, PLOGI, PRLI, and ADISC handling.
Link: https://lore.kernel.org/r/20220412222008.126521-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous topologies may no longer be in fabric mode, so clear FC_FABRIC in
fc_flag for every new FLOGI.
Link: https://lore.kernel.org/r/20220412222008.126521-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Several log message categories were updated:
- Enable msg 4623 (Xmit of ECD) to display for ELS logging.
- Change msg 0220 (FDMI cmd failed) to display for ELS logging.
- Change msg 6460 (FDMI RPA failure) to be warning not hard error.
- Change msg 6172 (NVME rescan of DID) to be logged under NVMe discovery.
Link: https://lore.kernel.org/r/20220412222008.126521-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
|
|
Update copyrights to 2022 for files modified in the 14.2.0.0 patch set.
Link: https://lore.kernel.org/r/20220225022308.16486-18-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the remaining ELS paths to use SLI-4 as the primary
interface. Paths include RRQ, RSCN, unsolicited ELS RQST and RSP paths, ELS
timeouts, etc.:
- Remove unused routines lpfc_sli4_bpl2sgl and lpfc_sli4_iocb2wqe
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the VMID paths to use SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the FDISC paths to use SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the LS_RJT paths to use SLI-4 as the primary
interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the LS_ACC paths to use SLI-4 as the primary
interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the SLI3/SLI4 RSCN/SCR/RDF/EDC/FARPR paths to use
SLI-4 as the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch refactors the PLOGI/PRLI/ADISC/LOGO paths to use SLI-4 as
the primary interface:
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
Link: https://lore.kernel.org/r/20220225022308.16486-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The patch refactors the general ELS handling paths to migrate to SLI-4
structures or common element abstractions. The fabric login paths are
revised as part of this patch:
- New generic lpfc_sli_prep_els_req_rsp jump table routine
- Introduce ls_rjt_error_be and ulp_bde64_le unions to correct legacy
endianness assignments
- Conversion away from using SLI-3 iocb structures to set/access fields in
common routines. Use the new generic get/set routines that were added.
This move changes code from indirect structure references to using local
variables with the generic routines.
- Refactor routines when setting non-generic fields, to have both SLI3 and
SLI4 specific sections. This replaces the set-as-SLI3 then translate to
SLI4 behavior of the past.
- Clean up poor indentation on some of the ELS paths
Link: https://lore.kernel.org/r/20220225022308.16486-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce lpfc_prep_wqe routine.
The lpfc_prep_wqe() routine is used with lpfc_sli_issue_iocb() and
lpfc_sli_issue_iocb_wait(). The routine performs additional SLI-4 wqe field
setting that the generic routines did not perform as they kept their
actions compatible with both SLI3 and SLI4.
Link: https://lore.kernel.org/r/20220225022308.16486-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, SLI3 and SLI4 data paths use the same lpfc_iocbq structure.
This is a "common" structure but many of the components refer to sli-rev
specific entities which can lead the developer astray as to what they
actually mean, should be set to, or when they should be used.
This first patch prepares the lpfc_iocbq structure so that elements common
to both SLI3 and SLI4 data paths are more appropriately named, making it
clear they apply generically.
Fieldnames based on 'iocb' (sli3) or 'wqe' (sli4) which are actually
generic to the paths are renamed to 'cmd':
- iocb_flag is renamed to cmd_flag
- lpfc_vmid_iocb_tag is renamed to lpfc_vmid_tag
- fabric_iocb_cmpl is renamed to fabric_cmd_cmpl
- wait_iocb_cmpl is renamed to wait_cmd_cmpl
- iocb_cmpl and wqe_cmpl are combined and renamed to cmd_cmpl
- rsvd2 member is renamed to num_bdes due to pre-existing usage
The structure name itself will retain the iocb reference as changing to a
more relevant "job" or "cmd" title induces many hundreds of line changes
for only a name change.
lpfc_post_buffer is also renamed to lpfc_sli3_post_buffer to indicate use
in the SLI3 path only.
Link: https://lore.kernel.org/r/20220225022308.16486-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver. Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver
supports SCSI and NVMe PRLIs.
Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.
Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up". When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.
Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
